[ChangeLog][QtCore] Added QtFuture::whenAll() and QtFuture::whenAny()
functions, returning a QFuture that becomes ready when all or any of the
supplied futures complete.
Task-number: QTBUG-86714
Change-Id: I2bb7dbb4cdc4f79a7a4fd494142df6a0f93a2b39
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Extract the definition of q20::ssize() from tst_qanystringview.cpp,
where it had to be placed for its backport to 6.2.
Change-Id: I3f758c98a4b1efd453f4fc044b8d3f1a89de62d1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Amends 4dd5020fbdfdd34f1e4ec54521217e472942a4b4. I messed up the fix for
the XFAIL condition, since the font engine type we get from a normal QFont
will be QFontEngine::Multi regardless of whether the actual font engines
are Freetype or not. Use NoFontMerging to avoid this.
Pick-to: 6.2
Task-number: QTBUG-97995
Change-Id: I2298c997e6826e667dbb8e3d004821f296625ef7
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
At least one OS (QNX) can't dlopen() a library that is still
open for writing elsewhere
Pick-to: 6.2
Change-Id: I2d4425d8c69162cdfa43c2523c7459def7839eb9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Need to use QConcatenable<>::ConvertTo for SFINAE, the forwarded type
alias in QStringBuilder itself doesn't work.
[ChangeLog][QtCore][QAnyStringView/QStringBuilder] Implicit conversion
from QStringBuilder to QAnyStringView now works as advertised.
Pick-to: 6.2
Fixes: QTBUG-98138
Change-Id: I1c300675cf43b13017bc56398ae5d8c1c51e64fe
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Don't crash if the font does not have any families set.
Pick-to: 6.2
Task-number: QTBUG-97995
Change-Id: I8dc2f2fc00309b6fff6d4a661ec6d659f30808af
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
In Qt 5, fonts had both singular family and plural families properties,
and both were stored separately when streaming through QDataStream. The
families list was treated as an extension of family in this case, and
the primary font family was always the singular family property.
In Qt 6, it has been merged into one and family() is now just a
convenience for families().at(0).
But when reading files generated with Qt 5, we would ignore the fact
that these were previously separated. We would first read the family
entry into the families list, and then we would later overwrite this
with an empty families list.
Instead, we detect streams created with Qt 5.15 or lower and make sure
we append the families list instead of overwriting it in this case. In
addition, we need to make sure we split up the list again when
outputting to Qt 5.x.
This adds a file generated with QDataStream in Qt 5.15 to the test to
verify.
[ChangeLog][Fonts] Fixed a problem deserializing the family of fonts
that had been serialized using QDataStream in Qt 5.
Pick-to: 6.2
Fixes: QTBUG-97995
Change-Id: Id3c6e13fc2375685643caee5f8e3009c00918ccb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
QObjects must be deleted if the QCoreApplication is being destroyed.
This was previously done by implementing custom code in qtbase and
other modules. So unify it and introduce a Q_APPLICATION_STATIC,
based on the Q_GLOBAL_STATIC, which centralises the logic.
Since we still have a few remaining living QObjects,
this comes in handy to fix those as well.
Task-number: QTBUG-84234
Change-Id: I3040a2280ff56291f2b1c39948c06a23597865c4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The relevant MS system calls (say they) don't support date formatting
for years < 1601 (but apparently do in fact) and the year field of the
data structure is unsigned, so can't support years < 0. As a result,
the windows back-end for QSystemLocale failed for negative years.
So replace year < 1601 with a place-holder and substitute after
formatting.
Added new tests (based loosely on one in qtdeclarative that failed) to
verify that this actually works. These reveal that macOS also fails to
handle negative years; marked as expected failure there pending a fix.
Change-Id: I9b63cefd5f0b77a39cf1238549412de3e26ca1bd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Provide basic boiler plate that sets up the baseline (aka lancelot)
framework specifically for comparing the appearance of widgets, and
implement test functions for QSlider and QPushButton.
Widgets should always look the same if the QPA platform, the OS
version, and certain UI-impacting attributes are identical. Ie.
on any macOS 10.15 machine that runs in "Light" mode, widgets
look the same. On a macOS 11 machine, they might look different.
On an OpenSUSE machine using the fusion style things might look
different from a Ubuntu machine.
The helper function removes DPR differences - images are always
scaled to a DPR of 1.0, which allows us to compare the image\
content and not get distracted by them having different dimensions
(and the fuzzy comparison of images might make the system tolerate
scaling artefacts).
Note: For now, this test is meant to be run locally, either when
testing changes to style code, or when checking how QWidget based
UIs would look on newer version of an operating system. In CI the
test is run, but then skipped in CI as the baseline server is
not configured.
Change-Id: Ie33a9d979d934f0df6883757333ce2c5e2f7ef84
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reduce overhead for including qguiapplication.h by splitting
up qnativeinterface.h into a public and a private part.
[ChangeLog][Potentially Source-Incompatible Changes] The
qguiapplication.h header no longer implicitly includes
qloggingcategory.h. If your code depends on the transitive
include, explicitly include <QLoggingCategory> where needed.
Pick-to: 6.2
Task-number: QTBUG-97601
Change-Id: Ic02327a1c3092e21730160af5c59a9d58dc1239c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The header for QTestEventLoop hadn't been included.
Pick-to: 6.2
Change-Id: Ife3418d1634c030c421c2aa55469f5a099386d4b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In preparation for addition of new baseline tests, establish a new
test category, "baseline". This is similar to the category
"benchmarks" in that it contains tests that use the QTest framework,
but conceptually are not unit tests, in contrast to those under auto/.
Move the existing QPainter baseline test, tst_lancelot, into this new
category, and rename it accordingly.
Baseline tests use the QBaselineTest extension to QTest. Move that
extension too into the tests/baseline directory, allowing the clean
out of the baselineserver directory.
Pick-to: 6.2
Change-Id: I1b527f5867c953b1d22be73798fcf7d1494712ea
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If QFontComboBox is instantiated in the form of new and call
QFontDatabase::addApplicationFont, QFontComboBoxPrivate::_q_updateModel()
will be called when the program exits, at this time qApp will crash.
Fix this by when program exiting, QFontComboBoxPrivate don't need
call _q_updateModel().
Fixes: QTBUG-98099
Done-With: Konstantin Ritt <ritt.ks@gmail.com>
Pick-to: 5.15 6.2
Change-Id: I3df3d19c3d1971288d60f2eef386262befbf396b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The source was already protected, but the destination wasn't.
Pick-to: 6.2
Change-Id: I300f19c3e65abd8bc1eef4309aefa11852d1c049
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In case the class doens't have a default constructor, checking for
object.isValid() will give false because the object won't be created,
however, the class could still be loaded and we could have a valid
jclass.
Pick-to: 6.2
Fixes: QTBUG-96069
Change-Id: I8d59e26d9d7c0e8e363ce443937091a374a24473
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This lets it avoid a two-digit year that would clash with month or day.
That shall make fixing up system locale date formatting run cleaner.
Add a test for QGregorianCalendar's two extensions.
Change-Id: I77083ff9d5e4035763250904a59fcf416286545b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In paintAndFlush, QWidgetRepaintManager subtracts opaque children if
the target isn't overlapped and isMoved is set to true. So in moveRect,
set isMoved to true after the blitting of movable areas, and reset it to
false if we have overlapped sibling or child regions. Otherwise, moving
so far that sourceRect is invalid (none of the original pixels are
visible after the move) we end up in a code path that sets isMoved to
true even with overlapping children or siblings, which then breaks
paintAndFlush's assumptions.
Reuse the test case written by Sergiy Korobov <tiamatenko@gmail.com> in
earlier attempts to fix this bug.
Fixes: QTBUG-26269
Pick-to: 6.2
Change-Id: If7443863f5eee79a80220cd587522122f42a21e4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Since QMainWindow::setMenuWidget accepts a QWidget (allowing users to
implement their own menu widget), we need to use qobject_cast on the
stored widget to see if it is a QMenuBar before calling QMenuBar APIs.
This qobject_cast may return nullptr.
Pick-to: 6.2
Fixes: QTBUG-98247
Change-Id: Iff1dbd24fa7ca09098fe49c179770356c966251d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QTabBar implements wheelEvent to move the current index up or down. This
is useful for clicky mouse wheels, but a bad user experience when using
a kinetic wheel or touch pad, as every pixel movement will change the
current index.
Instead, scroll the entire tab bar when the wheel event comes from a
device that supports scroll phases, without changing the current index.
As drive-by's, fix the test introduced in aa09bea00c to
not leak memory or leave a test-specific style set on the QApplication
instance, which can break other tests.
Also, make relevant layout code in QTabBar respect the usesScrollButtons
property, const'ify local variables, and return an accepted QWheelEvent
if the event resulted in a change.
[ChangeLog][QtWidgets][QTabBar] Scrolling with a kinetic wheel or touch
pad scrolls the entire tab bar, without changing the current index.
Change-Id: I990e51466dd25c741877bbf0e197449f897a9efb
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The slider is very touch friendly from macOS 11 on, and the knob is quite
large. Give it some extra pixels, and adjust the test accordingly.
Pick-to: 6.2
Task-number: QTBUG-98093
Change-Id: Iedf6db1081cdd4013ca29ce760aea1e0361b1123
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This change allows canceling the chain of continuations attached to a
future through canceling the future itself at any point of execution of
the chain.
[ChangeLog][QtCore][Important Behavior Changes] The chain of
continuations attached to a future now can be cancelled through
cancelling the future itself at any point of the execution of the chain,
as it was documented. Previously canceling the future would cancel the
chain only if it was done before the chain starts executing, otherwise
the cancellation would be ignored. Now the part of the chain that wasn't
started at the moment of cancellation will be canceled.
Task-number: QTBUG-97582
Change-Id: I4c3b3c68e34d3a044243ac9a7a9ed3c38b7cb02e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Adding new entries to QOperatingSystemVersion in patch releases
was previously breaking our BC guarantees because the entries are
exported, thus users cannot freely switch between different
patch-releases without a recompile if they adopted the new entries.
Move the data itself to a base class so that the entries can be
constructed inline.
Task-number: QTBUG-97808
Change-Id: Ic44f07488af8a04a3bedc10bebb740c4d68f43f3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMultiHash::operator== crashes when comparing two unequal objects.
This patch fixes it.
Pick-to: 6.2
Fixes: QTBUG-98265
Change-Id: Ibf9fef3372a2b4581843be5f25e65cc9a55ef64d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Check that a file name, not the full path, contains a dot.
Fixes: QTBUG-59401
Pick-to: 5.15 6.2
Change-Id: I193b2ae457a3ac6a460524dbf200786eb3461cef
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Explain why QSystemLocale needs to be an export. Unexport
QLocaleId::fromName() now that qttools no longer uses it.
QLocalePrivate was only Q_CORE_EXPORT for the sake of one use in
tst_QLocale, that can now be replaced by a call to a public QLocale
method.
Change-Id: I1efe8ee03488acfc6e1c36661f6e956a86e191c3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
After special processing for hover, QPushButton::mouseMoveEvent()
needs to call the base class function, like every virtual override
should, to continue processing other logic. Amends
3310e13a17
Fixes: QTBUG-97937
Pick-to: 6.0 6.2
Change-Id: Ic2e111d6c38371e0aa04423f5fb26c52717bf5fb
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Since e05e3c7762, the advance test in
tst_QFontDatabase::condensedFontMatching() passes with the bundled
freetype engine, so the XFAIL causes a failure when running with this
configuration.
Pick-to: 6.2
Change-Id: Ie6fbccfa0d9c79654563e9e3f19694f252e32fc6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Tests of QTimeZone::dispayName() were burying most of what was
interesting in the variations among them by repetition of a large
amount of boilerplate. Package the repetition in a macro so that
the differences between checks are more evident.
Change-Id: I23bcafab641b7d3bed50248ba5313250c150d30c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
MSVC 2022 (17.0.0) complains about "'QString::replace':
12 overloads have no legal conversion for 'this' pointer".
This is a compiler bug. It is reported to MS. Still we workaround
it here so that qtbase can be built with MSVC 2022.
Pick-to: 6.2
Task-number: QTBUG-96975
Change-Id: I0180e2e6760d2809ca61e3cd8f02b04f970172a7
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
And bump NTDDI_VERSION to 0x0A00000B (NTDDI_WIN10_CO) at the same time,
to unblock the developers from accessing the latest Windows APIs.
Pick-to: 6.2
Change-Id: Ifbc28c8f8b073866871685c020301f5f20dc9591
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Stop turning THAI CHARACTER SARA AM into a grapheme boundary because it
breaks a test and chromium does not consider it to be a separate
grapheme.
Fixes: QTBUG-88545
Change-Id: Ib1aea8dbb66ac42b2129cf9fe04c39f5f76eeb36
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Update tst_qlocale to take into account "narrow" day representation
change for Russian locales. This version of CLDR changes narrow forms
to one letter. Previously those forms were identical to short forms
(two letter). The new representation is consistent with other languages
and so does not appear to be a bug.
Fixes: QTBUG-94358
Pick-to: 6.2
Change-Id: I9724c281a250685da8232e5c05c9c375a8c79253
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This restores the Qt 5 behavior in Qt 6, but prepares for disabling it
in Qt 7. We want to deprecate the current behavior, as it makes it
unclear who is responsible for calling close.
Fixes: QTBUG-97747
Pick-to: 6.2
Change-Id: I2c99eb96667e784576d8850085068ca334d75b16
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use the Q_INT64_C() macro and qint64()-as-function instead of C-style
casts.
Change-Id: I9d169715da96a49898e9c9e2a6d3ee5182e1d91c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Where std::numeric_limits<...>::min() is used used as invalid value
for an API return, save it as a named constant so that the comparisons
are against an informative name, rather than leaving the reader to
guess the significance of the min-value.
Change-Id: Ia99c75e21856f65cb4494120d05eed36f5fc2d50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The documentation for QProcessEnvironment's default constructor
says:
This constructor creates an empty environment. If set on a
QProcess, this will cause the current environment variables
to be removed.
This is not the case however, because setting such an environment
for a process is equivalent to not setting an environment at all
and the child process is executed with parent's environment.
It is still possible starting from Qt 6.2.0 to create an empty
environment by adding a variable to a null environment and removing
it, but that's cumbersome, and the comparison operator says that
it is equal to the null environment but it is obviously behaving in
a different way.
This change adds an additional constructor to QProcessEnvironment
that can be used to construct a null environment, and changes the
default constructor to produce an empty environment. The comparison
operator is changed to correctly distinguish between such objects.
This is a behavior change, but the current behavior is broken
and this is unlikely to affect working code.
[ChangeLog][QtCore][QProcessEnvironment] An additional constructor
was added to explicitly create an object that when set on QProcess
would cause it to inherit the environment from parent (this was
formerly the behavior of a default-constructed QProcessEnvironment,
which will now (as documented) actually give a process an environment
with no variables set). A new method inheritsFromParent() was added
to test for such objects.
Fixes: QTBUG-58053
Change-Id: I15e20c6a5f01ebe2c736d5578c75dba1ee319320
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Indetnation was bad in commit 0ab3c5c250
and was missed in code review and one comment wasn't updated when the
code was.
Take the opportunity to remove an old TODO that has been completed for
years.
Change-Id: Ice04365c72984d07a64dfffd16b4899604513680
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Relying on QCursor::pos makes tests fragile and prevents multi-seat support.
Instead, record the mouse position in the already existing event handling,
and use that instead. Styles might use either WA_Hover or enable mouse
tracking for the widget to enable hover-effects, so we need to support both.
Fix the scenario where a newly inserted tab ends up under the mouse, which
was previously not handled correctly (only the case of removing a tab was).
Clean up the repaint management when the hovered tab changes; just call
update on the old rect, and then later update on the new rect; there's no
need to make a copy first, updates are posted and compressed.
Add a unit test that makes sure that we paint tabs that should be under the
mouse in the hovered state. Since not all styles enable hovering and/or
mouse tracking in all cases, use a style sheet for those styles that don't.
Change-Id: I7cdbb18e9e04b52651e273680fec87b50cb81e05
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Amends 17c1ebf8bf, which introduced logic
that recognizes double clicks to avoid duplicate clicked() emits. If a
slot connected to doubleClicked opens a dialog, then the release-event
will not be seen by the item view, leaving the flag incorrectly set and
preventing the next clicked signal.
Fixes: QTBUG-97853
Pick-to: 6.2 5.15
Change-Id: Iced83e8c66a763672f522265435dc52a745227e4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Don't rely on transitive include from qobject.h, which will go away.
Change-Id: I99dd97ff4fb1d0632d040daab0bffa2d7b85d3ae
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Clang aligns the object at 32-byte boundaries even though we
specifically asked for alignof(void*), so tell it not to sanitize the
address of the plugin object. Tested with Clang 12 and 13.
GCC seems not to be affected, even when ASan is enabled.
If this doesn't work, we may need to accept reading a note that is
improperly aligned. I don't think the output will be actually a correct
note because the intra-note alignment will be wrong (I carefully chose
the ELF note name so it would not require alignment, but that's only
valid up to 8-byte alignments).
Fixes: QTBUG-97941
Change-Id: Ice04365c72984d07a64dfffd16b422fe074d8a70
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
