The stored layout direction used to get changed during initialization
to what was auto-detected based on the translation. Changing the
translation then overwrote that stored value, even if an explicit call
to setLayoutDirection was made by the application.
Calling QGuiApplication::setLayoutDirection(Auto) has so far been a
no-op.
Change this logic so that the stored layout direction continues to be
LayoutDirectionAuto also if it's set based on auto-detection, and only
overwrite it when explicitly called with a non-Auto value. This way,
applications can set a layout direction that stays unchanged even when
translators are installed.
Add test coverage that uses a QTranslator.
In practice, this is not a change of behavior, unless applications called
setLayoutDirection(Auto) (which is no longer a no-op), or called
setLayoutDirection() and then installed a translator and expected the
translator's layout direction to come into effect in spite of the explicit
setting.
[ChangeLog][Gui][QGuiApplication] Calling setLayoutDirection with a non-
auto value now disables the auto-detection based on installed
translators. Applications that explicitly set a layout direction and also
want translators installed afterwards to take effect should reset the
layout direction to Auto, which is now no longer a no-op.
Fixes: QTBUG-100632
Pick-to: 6.3
Change-Id: I1fdcebd43a9b1b468ff95bf15f53f441bb214e08
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
In tst_qguiapplication and tst_qcoreapplication,
the application version should be set. On Android, this
is done using QT_ANDROID_VERSION_CODE.
Pick-to: 6.2 6.3
Change-Id: I6b473ad25092fb24df9400e0ab8fbb8ea4edbb6a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
on Wayland
Task-number: QTBUG-100891
Pick-to: 6.3 6.2
Change-Id: Iadf12364ded4549988ad75a9487c7e96e963a956
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
tst_qcoreapplication.cpp is used both in tst_qcoreapplication and
tst_qguiapplication. To distinguish these two compilations,
the define QT_GUI_LIB was used. This led to an error on Android,
where Qt::Gui is always linked, because the Qt Android Platform
Plugin needs it.
This patch introduces the preprocessor define QT_QGUIAPPLICATIONTEST
which is to be used only in the compilation of tst_qguiapplication.
This is then used instead of QT_GUI_LIB.
Change-Id: Ifa5bfacb197d68365288c1da85573106515fc6c2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Multiple tests use qt_internal_add_resource that copies the
functionality that is already implemented inside the
qt_internal_add_test function. Simplify these test by replacing
the qt_internal_add_resource call with the new BUILTIN_TESTDATA
option.
Change-Id: I18475b817d6f87264f0de53817d6c26c5ccab4e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In a512e210ac5b032c5fc2edf1ddf72e5a414485fda512e21 quitOnLastWindowClosed
was changed to be implemented in terms of quitLockEnabled, but without
any documentation to that end.
Although the two features are similar (automatic quit under certain
conditions), and interact, it doesn't make sense to overlap them until
we actually expose them as a single property (automaticQuit e.g.)
The logic for determining whether we can can quit automatically has
been refactored to take both properties into account, on both a Core
and Gui level. The call sites still need to check the individual
properties to determine whether to activate automatic quit for
that particular code path.
Change-Id: I38c3e8cb30db373ea73dd45f150e5048c0db2f4d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
They return a pointer to the actual header, skipping the magic string.
This is done in preparation for the header located in an ELF note, which
won't have the magic.
Change-Id: I3eb1bd30e0124f89a052fffd16a8229bec2ad588
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
After the recent refactoring in 28b14b966f
this test should run stable on all platforms. However, the way the test
was written made it quite flaky. Simplify it to verify that closing one
window doesn't prevent a second timer to fire (which it would if closing
the first window already quit the application).
Change-Id: I0306792cd7573ebd3418d1aabffe2b78700ec2d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Verifies that we get the messages we want, and makes it easier to see
relevant debug output.
Pick-to: 6.2
Change-Id: Ide92959b120f325badbf200236cdc85f72226e1e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
tst_qguiapplication was missing an Info.plist file.
We can't directly reference the tst_qcoreapplication Info.plist
file like the qmake project does, because that breaks ninja
(says multiple rules create the same output file), so use a
copy instead.
Blacklist the qpluginloader loadMachO test when doing CMake builds.
The qmake projects use multiple custom rules to build the macho
plugins, which need to be ported to CMake.
Task-number: QTBUG-86053
Task-number: QTBUG-86792
Change-Id: Iaff2b2d5e9e84a457b4f2ffc011a580388498f00
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Having three methods with the same name doing different things is
unnecessarily confusing, so follow the standard naming convention in
Qt and call the getter of the resolve mask resolveMask, and the setter
setResolveMask. These methods were all documented as internal.
The publicly documented resolve() method that merges two fonts and
palettes based on the respective masks remains as it is, even though
'merge' would perhaps be a better name.
Change-Id: If90b1ad800834baccd1dbc38fc6b861540d6df6e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
mkspecs/features/qt.prf adds a dependency on the system threading
library if the Qt Core thread feature is enabled. Because qt.prf is
loaded by any public or internal Qt project, it's essentially a public
dependency for any Qt consumer.
To mimic that in CMake, we check if the thread feature is enabled, and
and set the Threads::Threads library as a dependency of Qt6::Platform,
which is a public target used by all Qt modules and plugins and Qt
consumers.
We also need to create a Qt6Dependencies.cmake file so we
find_package(Threads) every time find_package(Qt6) is called.
For the .prl files to be usable, we have to filter out some
CMake implementation specific directory separator tokens
'CMAKE_DIRECTORY_ID_SEP' aka '::@', which are added because we call
target_link_libraries() with a target created in a different scope
(I think).
As a result of this change, we shouldn't have to hardcode
Threads::Threads in other projects, because it's now a global public
dependency.
Task-number: QTBUG-85801
Task-number: QTBUG-85877
Change-Id: Ib5d662c43b28e63f7da49d3bd77d0ad751220b31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We have seen during the Qt 5 series that QMouseEvent::source() does
not provide enough information: if it is synthesized, it could have
come from any device for which mouse events are synthesized, not only
from a touchscreen. By providing in every QInputEvent as complete
information about the actual source device as possible, we will enable
very fine-tuned behavior in the object that handles each event.
Further, we would like to support multiple keyboards, pointing devices,
and named groups of devices that are known as "seats" in Wayland.
In Qt 5, QPA plugins registered each touchscreen as it was discovered.
Now we extend this pattern to all input devices. This new requirement
can be implemented gradually; for now, if a QTWSI input event is
received wtihout a device pointer, a default "core" device will be
created on-the-fly, and a warning emitted.
In Qt 5, QTouchEvent::TouchPoint::id() was forced to be unique even when
multiple devices were in use simultaneously. Now that each event
identifies the device it came from, this hack is no longer needed.
A stub of the new QPointerEvent is added; it will be developed further
in subsequent patches.
[ChangeLog][QtGui][QInputEvent] Every QInputEvent now carries a pointer
to an instance of QInputDevice, or the subclass QPointingDevice in case
of mouse, touch and tablet events. Each platform plugin is expected to
create the device instances, register them, and provide valid pointers
with all input events. If this is not done, warnings are emitted and
default devices are created as necessary. When the device has accurate
information, it provides the opportunity to fine-tune behavior depending
on device type and capabilities: for example if a QMouseEvent is
synthesized from a touchscreen, the recipient can see which touchscreen
it came from. Each device also has a seatName to distinguish users on
multi-user windowing systems. Touchpoint IDs are no longer unique on
their own, but the combination of ID and device is.
Fixes: QTBUG-46412
Fixes: QTBUG-72167
Task-number: QTBUG-69433
Task-number: QTBUG-52430
Change-Id: I933fb2b86182efa722037b7a33e404c5daf5292a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It simplifies the API and reduces surprise to have rotation working by default.
On Android, the manifest specifies which orientations the application has
been designed to support; on iOS, it is controlled via the
UISupportedInterfaceOrientations property list key.
In addition, QWindow::contentOrientation() is another way to give
a hint to the window manager, or on iOS to directly control whether
the window's rotation is locked or not.
Task-number: QTBUG-35427
Task-number: QTBUG-38576
Task-number: QTBUG-44569
Task-number: QTBUG-51012
Task-number: QTBUG-83055
Change-Id: Ieed818497f686399db23813269af322bfdd237af
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Test was failing due to missing windows resource files which contain the
version information for the executable.
Change-Id: I19b0c747c6b833bac64f3667e9286350e7842b7c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: I55cb9a6b3aebac68fb1b20127ba7aa501b4a3f2b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The logic is now mostly handled in QGuiApplication, with QApplication
only dealing with the widget-specific palettes and interaction between
the style and the palette.
The application now picks up changes to the platform theme and will
re-resolve the current application palette appropriately. This also
works even if an explicit application palette has been set, in which
case any missing roles are filled in by the theme.
The palette can now also be reset back to the default application
palette that's fully based on the theme, by passing in the default
constructed palette (or any palette that doesn't have any roles set).
This is also correctly reflected in the Qt::AA_SetPalette attribute.
Conceptually this means QGuiApplication and QApplication follow the
same behavior as QWidget, where the palette falls back to a base or
inherited palette for roles that are not set, in this case the theme.
Behavior-wise this means that the default application palette of the
application does not have any roles set, but clients should not have
relied on this, nor does QWidget rely on that internally.
It also means that setting a palette on the application and then
getting it back again will not produce the same palette as set,
since the palette was resolved against the theme in the meantime.
This is the same behavior as for QWidget, and although it's a
behavior change it's one towards a more sane behavior, so we
accept it.
[ChangeLog] Application palettes are now resolved against the platform's
theme palette, the same way widget palettes are resolved against their
parents, and the application palette. This means the application palette
reflected through QGuiApplication::palette() may not be exactly the same
palette as set via QGuiApplication::setPalette().
Change-Id: I76b99fcd27285e564899548349aa2a5713e5965d
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It's perhaps best to ensure that functions we are deprecating shall no
longer be used in tests. Also, fix the "0 as nullptr" warnings.
Change-Id: I2f22c9b9482e80fa120bcd728ec269198a36678f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This static method can be called before QGuiApplication is created. At
that point there is yet no primary screen, so the implementation
needs to guard against dereferencing a nullptr.
Task-number: QTBUG-67309
Change-Id: I6b7b9e97b1c3c79bf2f9c6d6247c3b10f39f7a55
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This removes the need to install an event filter on qApp just for this.
A similar thing was done with setPalette to reduce the number of event filters
in e.g. SystemPalette and Quick Controls.
[ChangeLog][QtGui][QGuiApplication] Added fontChanged signal
Change-Id: Ifa843aa42b91ac63ab17c3b064ac0e764aac77d3
Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make it possible to blacklist the (newly created)
quitOnLastWindowClosedMulti() if all else fails.
Task-number: QTBUG-59088
Change-Id: I8c143a2017e7aefaf6cad6ada9c1464d40c952e7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If applicationDisplayName has not been set, the signal is emitted when
applicationNameChanged() is emitted.
[ChangeLog][QtGui][General] Add
QGuiApplication::applicationDisplayNameChanged() signal.
Task-number: QTBUG-53076
Change-Id: I18494ad90bd8dec3f79ef5175a3a85e776560fd0
Reviewed-by: David Faure <david.faure@kdab.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Use case insensitive comparison and static invocation
of QGuiApplication::platformName().
Change-Id: I8c197c7b4f0669f71c019fbcee09a0f03dfab399
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Disable input and cursor for QGuiApplication instances used in
autotest to initialize it properly.
Change-Id: I78dc9b776269c082c20f244a51f858289129275d
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
This property might be set by applications whose desktop entry file name
cannot be determined by heuristics already in place.
It is particularly useful for QtWayland as it can be used to determine
the app_id simply by stripping the ".desktop" suffix from this property.
Without a correct app_id, Wayland compositors won't be able to e.g.
show the application icon on task managers.
This property is also very interesting for X11 as there are various
desktop environments trying to map windows to launchers.
It will be possible to export desktopFileName as a xproperty, making
such mapping less error prone.
Change-Id: I0fef23f28f383639e625379ab46e36aecb338ac4
Reviewed-by: Martin Gräßlin <mgraesslin@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
