Extra compilers may define a depend_command that's used to generate
dependencies for each input. When GNUmake was enabled we failed to
run this command, which was affecting resource files, as resource
dependencies are handled by an extra compiler defined in resources.prf.
The result was that changes to resources included in a resources-file
did not trigger a re-run of qrc and subsequent recompile of the
resource object file.
We must always run these custom dependency commands, even when GNUmake
(and the extended gcc_MD_depends option) is enabled, as GCC is only able
to handle regular #include-type dependencies. Hence, the check for the
'include_deps' flag was removed from doDepends(), and the check for
GNUmake was moved to the one place where it still made sense -- when
deciding whether or not to do recursive dependency checking.
Change-Id: I5ddb75c873120c90f798808efc52e81500786301
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
And enable this configuration option for the resource compiler. This
results in a re-run of qmake whenever you touch a qrc file, which is
needed to keep the dependencies up to date. Otherwise you might end
up in the situation where you add a file to a qrc, edit the file some
time later, but a rebuild does not regenerate a cpp file and compile
that, so the final binary is stale.
Technically this dependency problem is present for all source files,
and qrc files are no different than any cpp file that you add a new
header #include to, or adding a Q_OBJECT macro to a header. To pick
up these changes we have to re-run qmake, so that qmake can run its
internal dependency checking, and any extra compiler dependency
commands.
The reason we're making this change for rcc files it that conceptually
people treat them as a "project" files, and expect them to behave similarly
to .pro or .pri files, in that editing the file will invalidate the
makefile. In practice this is often what happens when adding new
headers, as you touch the project file when changing the HEADERS
variable.
Task-number: QTBUG-13334
Change-Id: If69149678e7fba6d812d31dcc17877427f9a6122
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Tests will install under $$[QT_INSTALL_TESTS].
TESTDATA may be used to install additional testdata required by the
test.
The default install rule may be disabled by
CONFIG+=no_testcase_installs.
Change-Id: I204de60c8e844775906ffd016ca50bffbb414142
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
qmake generates .gpj project files for INTEGRITY.
Calls to moc on headers or code that do not produce actual output cause
a Note to be generated. This is considered as an error during build by
the Green Hills gbuild build tool.
-nn can be added to not generate that note when no output is generated.
This was already done for headers in util/integrity/qt.bod, but it was
not there yet for .cpp files.
Merge-request: 2693
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
(cherry picked from commit 480b2f4c79160afaac7934936d3ae6ea382ae2bb)
Change-Id: I480b2f4c79160afaac7934936d3ae6ea382ae2bb
gcc 4.6 becomes the minimum required version in Qt 5.
See also d4150975af620e2889cc58bd476bac6b4d101db3
in Qt 4.8.
Change-Id: If66ce0be755263c20b0a4371523c6590592d962d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Many enumerator values were not handled in msbuild_objectmodel.cpp. For
each unhandled value, add a case statement that simply breaks.
Change-Id: I018fc5e641200568c88ccc6acb3f5b6ee6b3fd6f
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
It's nicer to do:
SUBDIRS += foo
foo.CONFIG = no_default_target no_default_install
then to omit foo from SUBDIRS because a Makefile is still produced
but "make" and "make install" don't descend automatically.
The vcproj generator doesn't know about this. This patch gets it to
check for no_default_target and then it simply ignores the directory.
Change-Id: I127bea79143c101612afb0e9c6603d3b065c7c56
Reviewed-by: Oliver Wolff <oliver.wolff@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Using CONFIG+=GNUmake will enable dependency tracking using included
dependency files, but will use an implicit makefile rule to generate
each .d file.
We now support an additional CONFIG option, gcc_MD_depends, that
instead passes the -MD flag to a GCC (compatible) compiler. This
will generate a .d file as a side-effect of the normal compile
step.
Change-Id: Ib6ce1d93e7f07e316a345bf12aa6f2b4e9a6415d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Sometimes you will include "moc_foo.cpp" from a a cpp file, not to tell
qmake to run moc on it (that's handled by having foo.h in HEADERS), but
so that the moc'ed sources are compiled as part of foo.cpp instead of a
separate compilation unit, or if the moc'ed sources need defintions from
the cpp file.
The dependency logic for CONFIG+=GNUmake failed to take this case into
account, resulting in failures to find files when generating dependency
information for those files.
Change-Id: Iac00424e2d196b518b1ef576d7567335b8ff24f0
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Previously we were generating include lines based on the relative path of
the source file, which resulted in the .d files being placed in the source
dir as well. We now expect the .d files to live in the output dir, but keep
the dependency from the .d file to the original source file.
Before:
.deps/%.d: %.cpp
-include .deps/../../src/foo.d
After:
.deps/%.d: ../../src/%.cpp
-include .deps/foo.d
Change-Id: I749adeb671cf8424f0849521c5bb1489eb3e76d5
Reviewed-on: http://codereview.qt-project.org/6455
Sanity-Review: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
a qmake invoked with a relative path would not find qt.conf, because it
already changed CWD, which would confuse our copy of
QCoreApplication::applicationFilePath() (see also QTBUG-21381).
we already have the absolute path to the qmake executable in
Option::qmake_abslocation, so just use it.
(cherry picked from commit c378e16e57e8ce2255116e7fdb5436524cccb8c7)
Change-Id: Icfe4254722e0855f6755b639f4c86f15bc7323ba
Reviewed-on: http://codereview.qt-project.org/4565
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
this was just a merge artifact
(cherry picked from commit 4ac87b7042f7b08e8b427e21d74aa8d224b186bc)
Change-Id: Ifa0638982fe48fda2e8d9aa7ee43029187330f02
Reviewed-on: http://codereview.qt-project.org/4574
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
If you ran qmake with 'qmake -r', default_pre.prf would only be run once
while default_post.prf would run for every sub-project.
This makes it more symmetrical and correct.
Change-Id: I1d096c38dffb16f1d256c511ed9e2912cfaefe66
Reviewed-on: http://codereview.qt.nokia.com/1716
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
"default" was used a very long time ago, and it's time to let it go.
Change-Id: I230573ef778789f6e1a5a7df3543e660392da39b
Reviewed-on: http://codereview.qt.nokia.com/1746
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the 'item' reference may become invalid inside the loop.
this approach was chosen (instead of making 'item' a non-reference) to
keep the code more in sync with creator (where the string type is more
complex).
Change-Id: I60a4b0654dc47c0e3466d43904c358eb7e3e64e2
Reviewed-By: Marius Storm-Olsen
Reviewed-on: http://codereview.qt.nokia.com/1702
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
make it a proper topological sort. before, it could not resolve diamonds
correctly.
Change-Id: I17ffd81020ab36e7e5dbcfd120793ba8d9c6cf18
Reviewed-on: http://codereview.qt.nokia.com/1435
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
that's common practice for the expand functions, and that one isn't even
particularly big
Change-Id: I66c22e11edb66bd00d211fc1282eb75f5dd4832d
Reviewed-on: http://codereview.qt.nokia.com/1456
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
... and re-add a real $$resolve_depends(), just in case.
Change-Id: I489d6056546340ce95280fe7fd571e30c14470e7
Reviewed-on: http://codereview.qt.nokia.com/1455
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
it needs to go from highest order to lowest order.
that's not relevant unless doing static linking.
Change-Id: Ieb69e3949b4d9cc2d2a62f5661f31e3dc88ac882
Reviewed-on: http://codereview.qt.nokia.com/1454
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this is braindead, but it's consistent with the rest of qmake and more
performant. and the argument error message claimed it already anyway.
Change-Id: I973368acc6ffbff17107085ccd68b0334cc3e681
Reviewed-on: http://codereview.qt.nokia.com/1436
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
The distinction between 'examples' and 'demos' is completely blurred at
this point. We've decided, with the SDK people, to scrap the existing
terminology in favor of the word 'example' only -- distinguishing
between code snippets, walkthroughs, "demonstrations" can be done
via keywords or some other method.
Removing QT_INSTALL_DEMOS from all .pro files in Qt is still in
progress.
Change-Id: I86fc0e40d54baa54c5641fc6acbd8b67e4ad2789
Reviewed-on: http://codereview.qt.nokia.com/1034
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Recursive QMAKE_EXTRA_TARGETS were omitting the `-f' option to make.
This would break in the case where the correct makefile was not named
`Makefile'. The included autotest demonstrates the problem.
Note that this was fixed for normal targets back in 2005
by faac7bd178654fd67a6f3f9cf4f6f2605071448d (p4 202370), but was not
fixed for extra targets.
Reviewed-by: ossi
(cherry picked from commit 96a3bf7a8bbc1e5361e16cbeeceb4be674b88c30)
The template type "aux" is intended for projects that do not require building anything, but may need to install stuff (e.g. applications with QML entry point).
Reviewed-by: Joerg Bornemann
(cherry picked from commit 56443421cb5e537e60abd7ced42c9ebf587683fe)
This will allow us to expose private headers in a controlled manner,
and ensure that they are not used by accident. This also means that
we internally will have to enable the private headers for the
modules we wish to use in the project.
