For x86_32 the alignment of QBasicAtomicInteger<8 bytes> is not
equal to the alignment of TypeInStruct<8 bytes>, so do not perform
the check.
Fixes: QTBUG-87422
Pick-to: 6.3 6.2
Change-Id: I6e6c6cb7b2b7195e430d6a6991004bcfce16d4cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It relied on the set(QT_REPO_MODULE_VERSION ...) line being the first
thing in the file. It no longer is, and the variable is referenced in
an earlier condition.
Change-Id: I2bd2abd2a5680782ddd61f4bf4a4a3265b444d52
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Copying lot of testdata over NFS to qemu image start failing with
errors of "No space left on device" even there is enough space left.
Pick-to: 6.2 6.3
Change-Id: I2a417ed5b8c131e0a1f68c37b1fc2446ea013304
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The zone name was reported if isValid() failed, but not if
isTimeZoneIdAvailable(), where it also proved useful in uncovering
ICU's use of over-long zone name components.
Change-Id: I4b3b65b1a4a338b638c01fc7ad47294118ee0efc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The exception was previously limited to Android, but I now find that
ICU has the same over-long names; it seems likely that's where Android
gets them. Also update the link to the theory page from the TZ DB, as
it now has an official home on www.iana.org.
Task-number: QTBUG-99747
Pick-to: 6.3 6.2
Change-Id: I9af67426d15609dfaf5f335405ceb1218fcf40ff
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If the active QWidget gets destroyed, then QWidgetWindow::focusObject
will return nullptr. If then no other object takes focus, then we'd
never emit change signals, and QGuiApplication's _q_updateFocusObject
(which then informs the input context and emits signals) didn't get
called. This left the input context with a dangling focus object
pointer, which resulted in crashes.
If the QWidget clears its focus, but the corresponding window doesn't
know that it had focus, then fall back to the widget's focus widget
to see if we have a change in focus, so that signals get emitted.
Add a test case that shows that we didn't call _q_updateFocusObject
by counting emissions of the QGuiApplication::focusObjectChanged
signal, which we emit in this function. The signal is emitted more
than once both when showing a widget, and now also when destroying
a widget that has a focus child. The former is a previous issue,
the latter is an improvement to not emitting the signal at all.
Pick-to: 6.3 6.2
Fixes: QTBUG-101423
Fixes: QTBUG-101321
Change-Id: Ib96a397211d442f52ce795a3eebd055a0ef51b0d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If the QPromise is being destroyed, we should signal the associated
futures to stop waiting. No matter in which state the promise is, if
it's not finished, we should always cancel to avoid infinite waits.
This is also what docs state:
"The promise implicitly transitions to a canceled state on destruction
unless finish() is called beforehand by the user."
Fixes: QTBUG-101284
Pick-to: 6.3 6.2
Change-Id: I65ebfefe03b79b41afacda78a4f49938c54d8b37
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Currently test relies solely for external test server. This makes it
not possible to run test successfully with environment where docker is
used.
Pick-to: 6.2 6.3
Change-Id: Idf7e99c19ab630065b651f2f6d957311f45f0db7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Currently test relies solely for external test server. This makes it
not possible to run test successfully with environment where docker is
used.
Pick-to: 6.2 6.3
Change-Id: If716921ce6ceea1ced2d0d7025c6e9768b4ed7a7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Only (straightforwardly) implementable with modern APIs, and
only really exists to handle special platform cases, such as
when a video framework gives us a D3D texture array with
D3D11_BIND_DECODER | D3D11_BIND_SHADER_RESOURCE
which is only possible to use as a shader resource if the SRV
selects a single array layer.
Has no effect on the normal usage of texture arrays, where all
array layers are exposed, and it is the shader that selects the
layer when sampling or loading via the sampler2DArray. That
continues to be the standard way to work with texture arrays.
Change-Id: I0a656b605da21f50239b38abb83067e0208c1dbe
Reviewed-by: Piotr Srebrny <piotr.srebrny@qt.io>
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Don't mix unsigned and signed types in comparisons.
Pick-to: 6.3
Change-Id: Ia4ba9c114177425a21cadc8cafe8179928315a5d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
After cbf1b4bc60bca3994b8f8685ee922e53a6b4eed2 the selected item got
deselected on Ctrl+Press, which made Ctrl+dragging a selected item
impossible.
Only deselect on Ctrl+Release. Add scenario to existing test case,
and update the documentation to clarify the properties involved, and
to point out that the event parameter might be nullptr.
Fixes: QTBUG-101647
Pick-to: 6.3 6.2
Change-Id: I749b1cb1a0a311f5c1d4c333984716f05f2c90b5
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Volker Enderlein <volker.enderlein@ifm-chemnitz.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
To enable using `ninja tst_qlocalsocket_check` and have the
helper (re)built as part of the dependencies.
Pick-to: 6.3 6.2
Change-Id: I8703c4202a97606991d1cffe0d0f8e909a51f12f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Skip some of the obviously failing QCompleter-related tests instead of
blacklisting them.
Skip a test that causes a crash.
This allows to re-enable this test in CMakeLists.txt for Android.
Task-number: QTBUG-87417
Pick-to: 6.3 6.2
Change-Id: Ie7ee708df8ceddf117689e8ac749850ba86e8816
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This test doesn't fail on Android anymore, so don't use QEXPECT_FAIL.
Pick-to: 6.2 6.3
Task-number: QTBUG-100470
Fixes: QTBUG-69242
Change-Id: I5a96566728a486c701656aede1818e7ab7f019be
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The test is very flaky on Windows 11. Make sure that we have a secondary
window to close before proceeding, and wait for fade effects to finish,
otherwise we might never get the leave event from the windowing system.
Also replace a QVERIFY(qWaitFor) construct with a simple QTRY_VERIFY.
With these changes, a local run of 20 repeats of this test on a stressed
VM improves from 75% to 100%.
Pick-to: 6.3 6.2
Fixes: QTBUG-98477
Change-Id: Iedcc175b336e3cab23817b954aba1736d02f1b9d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When a B?Fail's description doesn't match the QVERIFY/QCOMPARE
regexes, it got output as a comment in the YAML block after the test
line had already reported it as a TODO comment. An empty description
would also have lead to an empty comment in the YAML block. Condition
this fallback output case on there being a description that hasn't yet
been reported in the test line.
Task-number: QTBUG-96844
Change-Id: Id7fe81d26ddb01da3d8003ada8fa590a5e1a166f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In all places but one they were treated the same; fix that last one to
match the rest. This removes one line from the YAML block for each
blacklisted XFail test; in each case, this message duplicates the one
on its "not ok ... # TODO..." test line.
Change-Id: Iff2028afccd979db7f2c84e85d1b78541900008e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Network autotests cannot connect to services on docker containers from
QNX qemu without all ports explicitly defined (both host and container)
side.
Pick-to: 6.2 6.3
Task-number: QTQAINFRA-4684
Change-Id: Iba44cfa17d42d43ecec3e29985e404f75d5fc232
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
In some situation we want to notify even if the value didn't change.
Task-number: QTBUG-101771
Pick-to: 6.2 6.3
Change-Id: I7d82a9f6e0f7d5eb48065e3f428b814939181ea8
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Don't use deprecated methods in tests, and don't refer to them in
documentation.
Change-Id: I110480742d9a7b9b0a2e194e3fe610208c1e07da
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This has performance benefits when doing comparisons.
The check is only performed at compile time.
Task-number: QTBUG-101014
Change-Id: I55694b045fe5e75d9671d0a3a70c80d998cf98c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Adapt to changes in QWidget::addAction API from 08e4d2db08.
Pick-to: 6.3
Change-Id: If6e05b47de88cf55070238f08b96586b855cc5c1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This was lost when QtCore, QtGui and QtWidgets were split up. Restored
now via a virtual function on QObjectPrivate.
Chose to return std::string instead of QString or QByteArray because
its SSO is usually sufficient to hold these flag strings.
[ChangeLog][QtCore][QObject] Restored printing of Qt3-style
information from dumpObjectTree().
[ChangeLog][QtWidgets][QWidget] Restored printing of Qt3-style
information from QWidget::dumpObjectTree().
Fixes: QTBUG-101732
Change-Id: I39ff5728ea5f5abbdbf81b5d7e13b8d16b6ee8b7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
... in preparation for replacing the QString keys in the public API
with QAnyStringView ones.
This removes the "important optimization" that avoids a detach in the
common case where the input is the same as the output of
normalization. But that optimization is beside the point, because it
trades a memory allocation avoided in the library for O(N) allocations
inserted into user code for each call to QSettings::value(), the vast
majority of which are calls with string literals.
With the public interface ported to QAnyStringView in the follow-up
patch, we can then internally optimize memory allocations _in a central
place_ (e.g. by returning std::u16string or QVarLengthArray<QChar> from
normalizeKey() instead of QString). But first we need to get rid of all
the unwarranted allocations in user code.
Change-Id: I45fc83d972c552a220c9c29508001d3f172e1162
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Selection change handlers of the items might call a method that
implicitly recreates the selectedItems QSet, which then invalidates
the iterators of the ranged for loop, resulting in crashes.
Iterate over a copy of the set instead.
Add a test case that crashen without the fix.
Fixes: QTBUG-101651
Pick-to: 6.3 6.2
Change-Id: I6da6f4043fe1906b0186931a37283f635cb5a404
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Add move constructor and move assignment operator.
To allow for the the change to be implemented QTemporaryDir, the
internal d_ptr was modified from a QScopedPointer, which is not movable,
to a raw pointer.
Add member + free swap implementations.
Add tests.
[ChangeLog][QtCore][QTemporaryDir] Enabled move semantics.
Change-Id: I9f196a77c70b4ca0b7f0c06505d00fdd87a9785c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
ClipboardManager didn't have any APIs to clear clipboard data before
API level 28.
As a workaround an empty Intent with MIMETYPE_UNKNOWN is created and
inserted into the clipboard for lower API levels.
This makes the QApplication::clipboard()->clear() method work more or
less as expected.
This allows to unblacklist tst_QPlainTextEdit::copyAvailable().
Task-number: QTBUG-87423
Task-number: QTBUG-89402
Pick-to: 6.3 6.2
Change-Id: I454376199cf3b8eed0fa2ecf2f85b87f40892280
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Because setObjectName() now takes a QAnyStringView, passing C string
literals is much more efficient than using QString::fromUtf8().
This patch only deals with setObjectName() as a known property,
probably from a name attribute. If the objectName property is set by a
<property> element (or so I assume), we still emit a
QString::fromUtf8(). Detecting objectName there would be too much
magic.
Besides, I haven't been able to find why sometimes there's a second
setObjectName call right after the first, when in the XML it seems all
kosher (name attribute and objectName <property> agreeing on the
content).
Change-Id: Icf07bad841ac735a9c744bbd955428ba15758089
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Parent window in sizeLessWindow test was using software pipeline at
least on webOS, causing a QCRITICAL() exit when the test was executed.
Fixes: QTBUG-101869
Pick-to: 6.3
Change-Id: Ie8cc0ea0b6a09729475389be44197e01a45b217f
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
There is no reason to allow relock() on a locked locker, or unlock()
or an unlocked one, just like we don't allow that on a plain mutex
to begin with. The docs already said that e.g. relock() locks an
_unlocked_ locker.
[ChangeLog][QtCore][QMutexLocker] QMutexLocker allowed relock() and
unlock() on an already closed (resp. open) locker object. These
semantics have always been undocumented and are now unsupported
(in both cases they yield undefined behavior.)
Change-Id: Id5f67beb5dc30d6435dae88a3085fba93ec7d96e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Percent-decoding was previously only present as a static method taking
a QBA parameter; it might as well be an instance method of that
parameter. Change most QBA tests to use it rather the static method.
[ChangeLog][QtCore][QByteArray] percentDecoded() is now available as
an instance method of the byte array to be decoded, equivalent to the
static QByteArray::fromPercentEncoding().
Change-Id: I982101c44bdac5cc4041e85598d52ac101d38fa1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The class is similar to unique_lock in that it allows for unlocking
and relocking. Since the locked state is tracked by QMutexLocker itself,
it's trivial to make it movable.
[ChangeLog][QtCore][QMutexLocker] The class is now movable.
Change-Id: I534044f8024575e996c12efb2236761d493798a3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Connecting to nullptr, or connecting to a non-signal PMF, would result
in a QFuture which would never finish. Catch these cases and handle
them.
Windows+MSVC for some reason fails the test. I can't entirely understand
why, so I've marked it as XFAIL, with QTBUG-101761 to track it.
Change-Id: I314980e7e9b7156d8cddd3b33d5cbf1d0bcd6116
Pick-to: 6.2 6.3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Use VERBATIM option to prepare the correct command line for the
add_custom_command. This especially sensitive when using build
directories with names containing special symbols, that cannot be
handled by shell correctly.
Change-Id: I51d7041cb806411135fd59bf6273c04a3c695443
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QString already has a localeAwareCompare(QStringView, QStringView)
static method. Use it in QStringView::localeAwareCompare(QStringView).
[ChangeLog][QtCore][QStringView] Added
QStringView::localeAwareCompare().
Task-number: QTBUG-98431
Change-Id: Iec3865a5439d9fb653cc1150da21042186bdee98
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
On Wayland, there is no protocol to do it yet.
Task-number: QTBUG-100792
Task-number: QTBUG-101145
Change-Id: Id72625a8161359111a2d0f43f3215e787778ba6b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Remove some kludgy, redundant and never used functionality for setting
project and test case names, as it also hindered overriding those
properties at runtime.
Pick-to: 6.3 6.2
Change-Id: Ibef7d7d0cb5fc1e462752f2ba2db76cc088dbd48
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In Qt 7 32-bit builds, the ShortData will be larger than the
d-pointer.
So don't swap() the d-pointer, but a) delegate to Data to swap itself
and b) swap the ShortData there, adding a static_assert in the .cpp
file that triggers when the assumption that ShortData is always at
least as large as a pointer is violated.
Found while porting away from overly-generic qSwap(), so done that,
too.
Task-number: QTBUG-97601
Pick-to: 6.3 6.2
Change-Id: I5139da58d99e9491a582ff2cb2f817cd96952044
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Connecting to a non-signal should fail, but apparently it doesn't on
Windows+MSVC under certain conditions.
Task-number: QTBUG-101761
Change-Id: I3e014660e4e5b287242e32307f677bb22ab10a39
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- The newest GHS compiler versions set the value of has_signaling_NaN to False.
Add compilation and autotest fix for GHS-compiler 2021/2022 releases.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I45e5da6759a15c60c17f896e565002cbba8524ed
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That is, insert() doesn't overwrite an existing entry, and range
insert inserts the first of equivalent keys' values, not the last.
This allowed this author to optimize the implementation of
makeUnique() to a O(N) algorithm (was: O(N²)). Said optimization would
have been possible with the old semantics, too, but I wrote the
algorithm first and only then noticed the broken insert() behavior is
present on QFlatMap, too, so I decided not to let good code go to
waste and to fix both problems at the same time.
In order to give users a hint of the changed semantics, make the new
API opt-in until Qt 6.5, so Qt 6.4 ships with the both the old and the
new semantics disabled, where they contradict.
Fixes: QTBUG-100092
Change-Id: Ic96d8bfe6bed9068dbe8c0d7171bd8921050fd95
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Animations in that style depend on the current time, which makes it
impossible to run baseline tests. Introduce a dynamic property that
allows us to set the time that animations use.
This way, tests can turn the animation off, or control which time should
be used.
To keep performance overhead low, check only once whether the dynamic
property is set at all.
Pick-to: 6.3
Change-Id: I9bc57b9867fb0d852e101570eca4c7609e7fe1a8
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Add a cmake test that builds a simple widgets application, installs
it, in a shared Qt build deploys the runtime dependencies and then
runs it to confirm that the app works.
With a static Qt, the installation of the runtime dependencies is
skipped, but the app should still run.
The test is expected to pass only when targeting Windows and macOS
(both when using shared and static Qt).
Pick-to: 6.3
Task-number: QTBUG-98545
Change-Id: I41b616e1e1fc463d57c64be9273ed4dc755e9187
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
In no particular order:
- use the variable field width feature of QString::asprintf() to
generate the indentation implicitly, instead of fill()ing a
QByteArray with the desired number of spaces
- just default-construct 'flags', don't assign an empty string
- use qUtf16Printable() to avoid funneling UTF-16 data through 8-bit
encodings
- use a C++11 ranged for instead of a counted loop
- remove a pointless isEmpty() guard (the loop won't execute when the
children().isEmpty())
- avoid copying object->children() (returns by cref, so it's also ok
to stuff it directly into the ranged for loop).
Add a test.
Pick-to: 6.3
Change-Id: Ie7314713cb48de7e890cdee0760c0361dd24fd18
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test task191545_dragSelectRows relied on the fact
that the view is not scrolling. But on a small screen,
it scrolls automatically.
Fixes: QTBUG-87407
Pick-to: 6.2 6.3
Change-Id: I691361c965ab03d8a012f2b83715c7c96d990ec5
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The previous constraint called for the value_type of the container to
exactly match the value_type of the tokenizer, which means
toContainer() could only ever work on containers of views. But there
is value in allowing QStringList, even though it works only on QL1S
needles (QStringView -> QString isn't implicit). But users may have
other types that for better or worse implicitly convert from views, so
we shouldn't over-constrain the function.
[ChangeLog][QtCore][QStringTokenizer] toContainer() now works on
containers whose value_type can be constructed from the tokenizer's
value_type. It no longer requires an exact match.
Fixes: QTBUG-101702
Change-Id: Ie384cd1c4b51eaa57675f2a014141ceec8651c81
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Android 9 introduce an API call to clear the clipboard, before that
it wasn't possible to do that, the test QPlainTextEdit::canPaste()
should expect that to fail.
Pick-to: 6.3 6.2
Task-number: QTBUG-100470
Change-Id: Ie2d8aabf77672c62b3a6c72a080a4e37f1696303
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
In a recent improvement (6de36918c0) the
last set clip region or path was stored in separate variables, in
order to be set again if the aliasing mode changed. That solution was
too simplistic, as it would break down as soon as more than one clip
area was set, with the latter either replacing or intersecting the
first. It was also unnecessary to introduce new storing of clip areas
and transforms, as those are already recorded in the clipInfo stack in
the painter state. This patch hence reverts much of that implementation.
However the basic idea of setting the clip area again after AA change
is good, so that part is kept, implementated instead by calling a
pre-existing function to replay the clipInfo stack.
One of the baseline test cases is extended to excercise the
combination of clip areas. As a driveby, support for setClipRectF is
added to the painting baseline test scripts, and the build of the
manual lance tool is fixed.
Fixes: QTBUG-101474
Pick-to: 6.3 6.2
Change-Id: Ide8b70d8cbf138deb06cbb84f69e62f7405886e6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Amends a74cdf778c, after which the
initialization of items in invisible rows is skipped. Since data members
in QFormLayoutItem were lazily initialized, this resulted in out-of-bounds
access of QList entries.
Use member initialization for all QFormLayoutItem fields, and check that
vLayoutIndex is valid before using it to access the list entry. Skip
labels and fields for which it is not initialized.
Add test case. As a drive-by, silence the test's provoked warning
messages via ignoreMessage.
Change-Id: I374b414a51df20b9af3087a2676061fc6b7f23e2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
C++20 deprecated arithmetic on enum types. For enums used on QFlags<>,
these operators have always been user-defined, but when the two enums
are of different type, such as QFrame::Shape and QFrame::Shadow, the
deprecation warning pops up.
We have in the past fixed these in our headers by manual casts, but
that doesn't help our users when our API requires them to OR together
enums of different type.
Until we can rework these APIs to use a variadic QFlags type, we need
to fix it in an SC and BC way, which is what this patch sets out to
do.
The idea is simply to mark pairs of enums that are designed to be ORed
together and replace the deprecated built-in bitwise operators with
user-defined ones in C++20. To ensure SC and BC, we pass an explicit
result type and use that to check, in C++17 builds, that it matches
the decltype of the result of the built-in operator.
This patch is the first in a series of similar patches. It introduces
said markup macro and applies it to all enum pairs that create
warnings on (my) Linux GCC 11.3 and Clang 10.0.0 builds. It is
expected that more such markups are needed, for other modules, and for
symmetry.
Even with this patch, there is one mixed-enum warning left, in
qxcbwindow.cpp. This appears to be a genuine bug (cf. QTBUG-101306),
so this patch doesn't mark the enums involved in it as designed to be
used together.
This patch also unearthed that QT_TYPESAFE_FLAGS, possibly
unsurprisingly so, breaks several mixed bitwise flags-enum operations
(QTBUG-101344).
Pick-to: 6.3 6.2 5.15
Task-number: QTBUG-99948
Change-Id: I86ec11c1e4d31dfa81e2c3aad031b2aa113503eb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
[ChangeLog][QtGui][QColor] The constructors from string-ish type, as
well as the setNamedColor() and isValidColor() functions, have been
deprecated effective Qt 6.6 in favor of fromString() and
isValidColorName(), resp.
Fixes: QTBUG-101389
Change-Id: I002646bd48c1e4340dc6842fd136fc9f35bb9b61
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The resulting blurriness is too significant, and it's hard to see where
the difference comes from. Better to encode the screen DPR into the
appearance ID if it's not 1.0, and warn about the comparison not being
done to the baseline images with a 1.0 DPR.
Pick-to: 6.3
Change-Id: Iceab7b0a4cc50627145bd1267cff22344f7d8e5b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Widget tests run in VMs that don't have their own git clone.
Pick-to: 6.3
Change-Id: I20ab32affabfc7ce6dfaa445306b19efb51803e9
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Mangling it into the checksum makes it hard to navigate the available
images.
Pick-to: 6.3
Change-Id: I54dcab5681e747ce1c5fe1b141ef6c4441d1f7eb
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Previously the blacklisting file format only worked with slot:data or
plain slot names for the items to blacklist. However, tests with
global data report themselves with the global data-row tag in the same
way as function-specific ones do; and tests which have both join the
two as slot(global:data) in the test output name, so the reader is apt
to mistake global:data for a data tag. In any case, it is potentially
desirable to be able to blacklist a function with either or both of
global and local data-row tags specified. Add support for that and
remove a blacklisting that was only needed due to the lack of this
support.
For now, make the new parameter to checkBlackLists() optional, so
that qtdeclarative's qmltest framework can adapt to this change.
Fixes: QTBUG-100870
Change-Id: I9125811ebdab75d3fb462ba8b60561f003426502
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This was not previously tested.
Change-Id: Icd287b519f6bc5d450f4490990ac78b0d06774f6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
pthread_yield() is a non-posix extension and was deprecated for a long time.
It's been removed recently at least from Fedora 35. Use sched_yield() instead.
Change-Id: Iae47fa09cc89005aa466446149be87e1b673c074
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
for QInputDevice::primaryKeyboard() and
QPointingDevice::primaryPointingDevice().
This also reverts ae9fefe3c8.
Fixes: QTBUG-100790
Pick-to: 6.3
Change-Id: Id02f277db25f823eb29e939e25801325df8e4076
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Found when retesting the testcase completer.zip from QTBUG-54642
Pick-to: 6.3 6.2 5.15
Change-Id: Id84eefeb3a33dc6d790cfa23755352381cc097a9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
And remove their uses.
[ChangeLog][QtCore][Deprecation Notice] Deprecated QString::count()
and QByteArray::count() that take no parameters, to avoid confusion
with the algorithm overloads of the same name. They can be replaced
by size() or length() methods.
Change-Id: I6541e3235ab58cf750d89568d66d3b1d9bbd4a04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QPlatformTextureList holds a QRhiTexture instead of GLuint. A
QPlatformBackingStore now optionally can own a QRhi and a
QRhiSwapChain for the associated window. Non-GL rendering must use
this QRhi everywhere, whereas GL (QOpenGLWidget) can choose to still
rely on resource sharing between contexts. A widget tells that it
wants QRhi and the desired configuration in a new virtual function in
QWidgetPrivate returning a QPlatformBackingStoreRhiConfig. This is
evaluated (among a top-level's all children) upon create() before
creating the repaint manager and the QWidgetWindow.
In QOpenGLWidget what do request is obvious: it will request an
OpenGL-based QRhi. QQuickWidget (or a potential future QRhiWidget)
will be more interesting: it needs to honor the standard Qt Quick
env.vars. and QQuickWindow APIs (or, in whatever way the user
configured the QRhiWidget), and so will set up the config struct
accordingly.
In addition, the rhiconfig and surface type is (re)evaluated when
(re)parenting a widget to a new tlw. If needed, this will now trigger
a destroy - create on the tlw. This should be be safe to do in
setParent. When multiple child widgets report an enabled rhiconfig,
the first one (the first child encountered) wins. So e.g. attempting
to have a QOpenGLWidget and a Vulkan-based QQuickWidget in the same
top-level window will fail one of the widgets (it likely won't
render).
RasterGLSurface is no longer used by widgets. Rather, the appropriate
surface type is chosen.
The rhi support in the backingstore is usable without widgets as well.
To make rhiFlush() functional, one needs to call setRhiConfig() after
creating the QBackingStore. (like QWidget does to top-level windows)
Most of the QT_NO_OPENGL ifdefs are eliminated all over the place.
Everything with QRhi is unconditional code at compile time, except the
actual initialization.
Having to plumb the widget tlw's shareContext (or, now, the QRhi)
through QWindowPrivate is no longer needed. The old approach does not
scale: to implement composeAndFlush (now rhiFlush) we need more than
just a QRhi object, and this way we no longer pollute everything
starting from the widget level (QWidget's topextra -> QWidgetWindow ->
QWindowPrivate) just to send data around.
The BackingStoreOpenGLSupport interface and the QtGui - QtOpenGL split
is all gone. Instead, there is a QBackingStoreDefaultCompositor in
QtGui which is what the default implementations of composeAndFlush and
toTexture call. (overriding composeAndFlush and co. f.ex. in eglfs
should continue working mostly as-is, apart from adapting to the
texture list changes and getting the native OpenGL texture id out of
the QRhiTexture)
As QQuickWidget is way too complicated to just port as-is, an rhi
manual test (rhiwidget) is introduced as a first step, in ordewr to
exercise a simple, custom render-to-texture widget that does something
using a (not necessarily OpenGL-backed) QRhi and acts as fully
functional QWidget (modeled after QOpenGLWidget). This can also form
the foundation of a potential future QRhiWidget.
It is also possible to force the QRhi-based flushing always,
regardless of the presence of render-to-texture widgets. To exercise
this, set the env.var. QT_WIDGETS_RHI=1. This picks a
platform-specific default, and can be overridden with
QT_WIDGETS_RHI_BACKEND. (in sync with Qt Quick) This can eventually be
extended to query the platform plugin as well to check if the platform
plugin prefers to always do flushes with a 3D API.
QOpenGLWidget should work like before from the user's perspective, while
internally it has to do some things differently to play nice and prevent
regressions with the new rendering architecture. To exercise this
better, the qopenglwidget example gets a new tab-based view (that could
perhaps replace the example's main window later on?). The openglwidget
manual test is made compatible with Qt 6, and gets a counterpart in form
of the dockedopenglwidget manual test, which is a modified version of
the cube example that features dock widgets. This is relevant in
particular because render-to-texture widgets within a QDockWidget has
its own specific quirks, with logic taking this into account, hence
testing is essential.
For existing applications there are two important consequences with
this patch in place:
- Once the rhi-based composition is enabled, it stays active for the
lifetime of the top-level window.
- Dynamically creating and parenting the first render-to-texture
widget to an already created tlw will destroy and recreate the tlw
(and the underlying window). The visible effects of this depend on the
platform. (e.g. the window may disappear and reappear on some,
whereas with other windowing systems it is not noticeable at all -
this is not really different from similar situtions with reparenting
or when moving windows between screens, so should be acceptable in
practice)
- On iOS raster windows are flushed with Metal (and rhi) from now on
(previously this was through OpenGL by making flush() call
composeAndFlush().
Change-Id: Id05bd0f7a26fa845f8b7ad8eedda3b0e78ab7a4e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If a test crashes it might leave local sockets, causing test failures
on subsequent runs due to the socket already being "in use".
Pick-to: 6.3
Change-Id: Ie1107c414f4819026907071c7b8281b2e27b8541
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
RFC2397 doesn't explicitly mention it, but references RFC2045, which,
in Section 2, states:
> All media type values, subtype values, and parameter names as
> defined are case-insensitive.
and goes on, in 6.1:
> mechanism := "7bit" / "8bit" / "binary" /
> "quoted-printable" / "base64" /
> ietf-token / x-token
>
> These values are not case sensitive
So regardless of whether "base64" is a parameter name, or a mechanism,
we need to treat it case-insensitively.
Use QLatin1String::endsWith() instead of QByteArray::endsWith(),
because the former takes Qt::CaseInsensitive while the latter would
need a toLower().
Add a test.
As a drive-by, use the same trick for the existing case-insensitive
comparison with "charset".
As a further drive-by, fix inappropriate uses of QLatin1String (=
where they don't prevent allocations).
[ChangeLog][QtCore][QUrl] Now recognizes the ";base64" marker in
"data:" URLs case-insensitively.
Pick-to: 6.3 6.2
Change-Id: Ife6ba771553aaad3b7c119c1fa631f41ffa8f590
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We want to mark the corresponding QColor ctor(s) explicit.
Use Qt::GlobalColor or the new QColor::fromString() instead.
Change-Id: I68bf75a094e6821b97682de5a0ffd975834d22d0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QObject's cache the binding status pointer to avoid TLS lookups.
However, when an object is moved to a different thread, we need to
update the cached pointer (as the original thread might stop and thus no
longer exist, and to correctly allow setting up bindings in the object's
thread).
Fix this by also storing the binding status in QThreadPrivate and
updating the object's binding status when moved. This does only work
when the thread is already running, though. If it is not running, we
instead treat the QThreadPrivate's status pointer as a pointer to a
vector of pending objects. Once the QThread has been started, we check
if there are pending objects, and update them at this point.
Pick-to: 6.2 6.3
Fixes: QTBUG-101177
Change-Id: I0490bbbdc1a17cb5f85044ad6eb2e1a8c759d4b7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QComboBox is included because it works like a button when it is not
editable. QGroupBox is included because it has a checkbox and QCheckBox
is a subclass of QAbstractButton.
Change-Id: Iad89259314e77f78c915dce83ec601df94c88941
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Qt Creator crashes when max is INT_MAX and min is -1, see bugreport.
Change-Id: I441e76c0ff87052083ed3d77e6085b186402e5d8
Fixes: QTBUG-101581
Pick-to: 6.2 6.3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Required for the API symmetry between QStringView and QLatin1String.
[ChangeLog][QtCore][QStringView] Added an overload of
QStringView::count() for QLatin1String.
Change-Id: Ic49a4b31e8f6f0969eff0f792654d23a60e06c49
Task-numer: QTBUG-98431
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Also contains some fixes which fix the Windows build, amending
e1b8257dee.
Pick-to: 6.3
Fixes: QTBUG-101294
Fixes: QTBUG-101304
Change-Id: I779f50fc705ed32f0314daf28b39b477a7fe925d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check that the expected overloads are selected in
QString/QAnyStringView overload sets.
Pick-to: 6.3
Change-Id: I38148c20a72eb60cf86844a39fe0ed419d2fa562
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It is customary for Qt types that can be constructed from string-ish
to provide a fromString() named constructor. QColor didn't, relying
instead on a set of overloaded implicit and explicit constructors.
Add the named constructor, with the intent to deprecate the string-ish
QColor constructors after a grace period.
To prevent new users from using known-to-become-deprecated API, mark
the old functions as \obsolete.
Also rename isValidColor() to isValidColorName(). The only reason why
these are lumped together in single commit is so that their docs can
refer to each other instead of having to temporarily refer to obsolete
API.
[ChangeLog][QtGui][QColor] Added fromString() and isValidColorName(),
both taking QAnyStringView.
Task-number: QTBUG-101389
Change-Id: I2857c728257ad2f14c7c968b45547bdf07c44b63
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Without this change, the test fails when run twice in a row. Also, skip
the test if we can't move the cursor.
Pick-to: 6.3
Change-Id: Ic45c073007d114fbd7825cedef6761c1e410b4af
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Also include the comprehensive tests for bool cast compilation which I
originally wrote to confirm that the QTEST_ASSERT() change should be™
correct.
Pick-to: 6.3
Task-number: QTBUG-101406
Change-Id: I9a2871bfd4be9999b7a720bec775bba7aeffbe24
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
QDateTimeEdit's default constructor instantiates the start of
1752-09-14 as its default earliest time; however Friedeman has seen
this triggering an assertion. The QDTE tests should be picking that up
anyway, but let's overtly test it in QDate's startOfDay testing, too.
Change-Id: Ifae87f2695ac3a7993c173a7c21809c87d5daa71
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The test crashed for some reason, so other testcases are also not
executed. Skip the test for now to enable more tests in the CI
Task-number: QTBUG-89402
Pick-to: 6.3 6.2
Change-Id: I5ad38645d1b8f86c64da7208c0ae4f66d126c7d9
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Most of the blacklisted tests were already fixed earlier.
The tst_QPlainTextEdit::adjustScrollbars() test needed a small fix
to show the window non-fullscreen, so that the scrollbar could appear.
Task-number: QTBUG-87423
Task-number: QTBUG-89402
Pick-to: 6.3
Change-Id: I849f411a5798053742323fc4db3fe30f2b690a8b
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This overload set may come in handy to cushion some of the concerns
regarding replacing QString functions with QAnyStringView ones.
Overloading with a Q_WEAK_OVERLOAD QAnyStringView function requires
users to jump through hoops in order to avoid the QString overload,
but with the Q_WEAK_OVERLOAD roles reversed, the QAnyStringView
overload becomes the preferred version, relegating the QString
overload to a fall-back to facilitate sharing where it makes sense
(e.g. for QObject::setObjectName()).
Pick-to: 6.3
Change-Id: Ic65ead505beee627976a306e2d430e800540a600
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Use two template parameters for the haystack and needle types, to test
all possible combinations of all argument types.
Note that the tests for QByteArray::count() are removed: it doesn't
make sense to have them in tst_qstringapisymmetry, and we already have
the symmetry tests for QByteArray in tst_qbytearrayapisymmetry.
Change-Id: I33901fd135eb7433f0d45300a7248aef4d40324a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Don't use the haystack as needle when testing count() for QLatin1String.
This wasn't caught earlier, since QLatin1String has no count() yet, and
the codepath was never tested.
Pick-to: 6.3 6.2
Change-Id: I2764070894ddce047eceaea52456e5a521252dab
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The test is no longer failing on Android in dev and 6.3, but still
failing in 6.2.
I think it's fixed by 63a35898f4
which is integrated into dev and 6.3
Task-number: QTBUG-87396
Pick-to: 6.3
Change-Id: I82e0aac1547f8e43353f0948cd3f91b4b8f9720e
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The operators are declared in the Qt::Literals::StringLiterals
namespace, to avoid collisions in the global namespace.
[ChangeLog][QtCore][QLatin1String] Added literal operator""_L1 that
converts string literals and chars to QLatin1String and QLatin1Char.
Fixes: QTBUG-98434
Change-Id: Ia945a6acf4b8d4fbbb5f803264e4d79d7b17a8da
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Our associative containers' iterator's value_type isn't a destructurable
type (yielding key/value). This means that something like
for (auto [k, v] : map)
doesn't even compile -- one can only "directly" iterate on the
values. For quite some time we've had QKeyValueIterator to allow
key/value iteration, but then one had to resort to a "traditional" for
loop:
for (auto i = map.keyValueBegin(), e = keyValueEnd(); i!=e; ++i)
This can be easily packaged in an adaptor class, which is what this
commmit does, thereby offering a C++17-compatible way to obtain
key/value iteration over associative containers.
Something possibly peculiar is the fact that the range so obtained is
a range of pairs of references -- not a range of references to pairs.
But that's easily explained by the fact that we have no pairs to build
references to; hence,
for (auto &[k, v] : map.asKeyValueRange())
doesn't compile (lvalue reference doesn't bind to prvalue pair).
Instead, both of these compile:
for (auto [k, v] : map.asKeyValueRange())
for (auto &&[k, v] : map.asKeyValueRange())
and in *both* cases one gets references to the keys/values in the map.
If the map is non-const, the reference to the value is mutable.
Last but not least, implement pinning for rvalue containers.
[ChangeLog][QtCore][QMap] Added asKeyValueRange().
[ChangeLog][QtCore][QMultiMap] Added asKeyValueRange().
[ChangeLog][QtCore][QHash] Added asKeyValueRange().
[ChangeLog][QtCore][QMultiHash] Added asKeyValueRange().
Task-number: QTBUG-4615
Change-Id: Ic8506bff38b2f753494b21ab76f52e05c06ffc8b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][Network][QNetworkCookieJar] It is possible to use
system's copy of publicsuffix database when it is available.
This behavior is enabled by default on Linux and can be
controlled using new command line switches -system-publicsuffix,
-qt-publicsuffix, -no-publicsuffix, and -publicsuffix=all.
Fixes: QTBUG-95889
Change-Id: I911e1a13c1422cdc35851953309fff064e7c5f26
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The existing API of QFlatMap did not allow efficient removal of
elements:
- std::remove_if does not apply, because it works by moving elements
back in the range onto those that need to be removed, which doesn't
work in flat_map's case, because, like for all associative
containers, the key in value_type is const.
- The node-based erase-loop (over it = cond ? c.erase(it) :
std::next(it)) works, but, unlike in traditional associative
containers, is quadratic, because flat_map::erase is a linear
operation.
According to Stepanov's principle of Efficient Computational Basis
(Elements of Programming, Section 1.4), we're therefore missing API.
Add it.
I couldn't make up my mind about the calling convention for the
predicate and, despite having authored a merged paper about erase_if,
can never remember what the predicate is supposed to take, so be fancy
and accept all: (*it), (it.key(), it.value()), (it.key()). This means
that unary predicates can either not be generic or must be properly
constrained to distinguish between pair<const K, V> and K, but that's
not necessarily a bad thing.
There's no reason to supply a Qt-ified removeIf on top of the standard
name, because this is private API and doubling the names would do
nothing except double the testing overhead.
Fixes: QTBUG-100983
Change-Id: I12545058958fc5d620baa770f92193c8de8b2d26
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
... if there aren't any.
Pick-to: 6.3
Change-Id: I8531e0c1c3ca41d1b1a9d55c9d11782bd63b6f76
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
As a drive-by, fixed misleading wording used in docs.
[ChangeLog][QtCore][Potentially Source-Incompatible Changes][QLatin1String]
Added QLatin1String(std::nullptr_t) constructor, which makes
QLatin1String(0) call ambiguous. To fix the ambiguity, nullptr
must be passed instead of 0.
Task-number: QTBUG-98433
Change-Id: I2b888aa23469343d78aa640dc39a6028b77165dd
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
on Wayland
Task-number: QTBUG-100917
Pick-to: 6.3 6.2
Change-Id: I66c42bb0ceca83fd0531159c606d22c58b18b371
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In QPainter, clipping can only be done on whole pixels. The various
ways of specifying a clipping rectangle to the QPainter API have been
inconsistent in how fractional rectangles (either specified directly,
or as a result of fractional scaling) are mapped (rounded) to integer
coordinates.
Also, the mappings have not made sure to keep the edge-to-edge
property of clip rects under scaling. This is particularly important
when scaling QRegions with multiple rects, as QRegion is designed on
the assumption that an area can be described as a set of edge-to-edge
rects.
The fix rounds a clip rect identically with a fill rect. (Indeed, a
followup plan would be to merge QRasterPaintEngine's
toNormalizedFillRect() with the rectangle rounding function in this
commit).
Notably, a QRectF clip is now interpreted the same as a QPainterPath
clip describing the same area.
This modifies d9cc149995
Task-number: QTBUG-100329
Fixes: QTBUG-95957
Task-number: QTBUG-100343
Pick-to: 6.3
Change-Id: Iaae6464b9b17f8bf3adc69007f6ef8d623bf2c80
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
tst_qxmlstream was disabled because it crashed. It does not any more.
But it extracted an input zip archive in-place, which is not
possible on Android. To resolve this, input files are
copied to a temporary directory first.
Also, input directories were given to rcc. rcc has a problem
with recursive directories. To circumvent this,
the file list is created in CMake and then given to rcc.
Task-number: QTBUG-87671
Pick-to: 6.2 6.3
Change-Id: I88bb823b9e5c085404e263d4a648d65c9cd6024c
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
QNX tests are run under QEMU so have the same problem as b2qt
Pick-to: 6.2 6.3
Task-number: QTBUG-100948
Change-Id: I2abc8a4bca9e8ba414197721301d493296e7ce0b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This test crashed and prevents other testcases from execution.
The test requires a proper fix, but that's not trivial, so skipping
to enable more tests in the CI for now.
Task-number: QTBUG-101321
Pick-to: 6.3 6.2
Change-Id: I1bd4b1182cc868a36391a718457eae647675fc17
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
This test uses the cursor. However we have no cursor support on Android.
Skip the test instead of blacklisting it, because that is the correct
behavior.
Fixes: QTBUG-87389
Pick-to: 6.3 6.2
Change-Id: I1a2d2dd406b3d7da1bc70b51c2072a83d9a29ca5
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
[ChangeLog][QtCore][QSettings] The INI file reader now supports
keys encoded with UTF-8, as well as the %-encoded format. Writing
the keys back to the INI file is still done using %-encoded format.
This change does not touch the way the *values* are handled - they
are both read and written in UTF-8.
Drive-by: remove misleading comments from the reading algorithm.
Task-number: QTBUG-99401
Change-Id: I6a83cbf24d919a499540403688615f93cb195e93
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The array of metatypes should always contain at least one entry (for the
metatype of the current metaobject itself).
This prevents crashes in the case of a metaobject without meta-methods
and properties (as observed in Qt for Python).
Pick-to: 6.2 6.3
Change-Id: I7a6fb316eea48c4852b6f1c26e0a930aeba4c799
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
In constExpr(), where code incorrectly assumed conversions to int or
uint were implicit, make them explicit.
In classEnum(), don't test bitwise operators between QFlags and
int/uint when QT_TYPESAFE_FLAGS is in effect.
Pick-to: 6.3
Fixes: QTBUG-101294
Change-Id: If119bf56dd12778f7231a9e76293c76e75354809
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_qmenu was disabled because it crashed.
It does not any more.
Task-number: QTBUG-87671
Task-number: QTBUG-87424
Pick-to: 6.2 6.3
Change-Id: I1a3a1d2861b5a8f20d83fd8ba38fdcb3c88faee9
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qfiledialog was disabled because it crashed. It does not any more.
Task-number: QTBUG-87671
Task-number: QTBUG-101194
Pick-to: 6.2 6.3
Change-Id: Icfda2cd01677f3a076b74429fcf66a1de79d2aa9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Without features getifaddrs and ipv6ifname we cannot
get correct IPV6 information for interfaces.
Pick-to: 6.2 6.3
Change-Id: I7f8c4e68d345160d218fde8db640440f3324014e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When we create a QPixmap using QWidget::grab(), a default system
image format is used for that.
On Android this format is ARGB32_Premultiplied, while on the desktop
systems it is RGB32.
The images that are saved in the resources and used as references, also
have the RGB32 format.
As a result, on Android we need to convert the pixmap to a proper format
before comparing it to the reference.
Fixes: QTBUG-69064
Pick-to: 6.3 6.2
Change-Id: I2d881e508d34e0b1a2a1a7bffcbc71ae2907d31d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
QHeaderView creates persistent indexes in
_q_sectionsAboutToBeChanged(), called by the slot connected to
rowsAboutToBeMoved/columnsAboutToBeMoved.
In the case of rows, QAbstractItemModel emits the signal *before*
preparing to update persistent indexes in itemsAboutToBeMoved(),
so it can see the ones newly created by QHeaderView, all is well.
In the case of columns, the emit was done *after* calling
itemsAboutToBeMoved(), so the additional persistent indexes created by
QHeaderView were ignored, and in endMoveRows() we could end up with:
ASSERT failure in QPersistentModelIndex::~QPersistentModelIndex: "persistent model indexes corrupted"
This bug has been there since the very beginning of beginMoveColumns(),
but was undetected because moving columns in a model is pretty rare
(in my case there's a QTransposeProxyModel that turns columns into
rows in the underlying model, and a proxy that handles dropMimeData...)
Pick-to: 6.3 6.2 5.15
Change-Id: I74bad137594019a04c2a19c2abb351ff3065c25a
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
While switching to the 'momentary push in' button type, the old code that
shows button as pressed/checked was removed. Since 'square' buttons
were sharing this part with rounded push buttons, the change broke
checked square buttons. So we retain the old code for this particular
case.
Also, add a minimal baseline test for this scenario: square button,
triggering 'toolbutton' style with/out 'checked' state.
Fixes: QTBUG-100802
Pick-to: 6.3 6.2
Change-Id: Ib7b15b13ead834c7bb2cd36de76ccd5bedb07810
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
At least one OS (QNX) can't dlopen() a library that is still
open for writing elsewhere
Pick-to: 6.2 6.3
Fixes: QTBUG-101020
Change-Id: I84ca709a65fc824ec4b3e3f1ea03704bf1cc0414
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On Android we had 10 failing unit-tests in tst_qaccessibility
One of them was failing because on Android QMdiSubWindow is created
maximized by default, so we need to explicitly call showNormal() on
it before doing all the checks.
Other 9 were failing because we didn't get A11Y events when expected.
This is a bit more tricky.
On Android a11y state is not explicitly set by calling
QPlatformAccessibility::setActive(), there is another flag that is
controller from the Java side. It is set to 'true' only when some
of the a11y services are enabled on the device. The state of this
flag is queried during event processing, so a11y state can be reset
to false while we do QTest::qWait().
This logic is absolutely correct for real applications, but it is
a problem for the test case, because we can't easily enable a11y
services in the CI.
To overcome the issue in unit-tests, re-enable a11y before each test.
A more precise fix will require re-enabling it after every qWait() or
processEvents() call, but the current tests pass with such condition.
Fixes: QTBUG-87674
Pick-to: 6.3 6.2
Change-Id: I6f765bc6d3aaeaa19aba3a64473ea25e9cbdb0f8
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Instead of proxy-testing for the OS, test for the thing you're going to
use. Fixes the build on FreeBSD.
Pick-to: 6.3
Change-Id: Ibf4acec0f166495998f7fffd16d693df09871492
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
Reviewed-by: Tatiana Borisova <tatiana.borisova@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The content of the window was intended to trigger wrapping.
On Android, the window is larger, so more content is
necessary. This patch adds more content.
Fixes: QTBUG-87401
Pick-to: 6.2 6.3
Change-Id: I33a2fe4560c358f2b0b83523ee4ab26bb5dd2513
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The stored layout direction used to get changed during initialization
to what was auto-detected based on the translation. Changing the
translation then overwrote that stored value, even if an explicit call
to setLayoutDirection was made by the application.
Calling QGuiApplication::setLayoutDirection(Auto) has so far been a
no-op.
Change this logic so that the stored layout direction continues to be
LayoutDirectionAuto also if it's set based on auto-detection, and only
overwrite it when explicitly called with a non-Auto value. This way,
applications can set a layout direction that stays unchanged even when
translators are installed.
Add test coverage that uses a QTranslator.
In practice, this is not a change of behavior, unless applications called
setLayoutDirection(Auto) (which is no longer a no-op), or called
setLayoutDirection() and then installed a translator and expected the
translator's layout direction to come into effect in spite of the explicit
setting.
[ChangeLog][Gui][QGuiApplication] Calling setLayoutDirection with a non-
auto value now disables the auto-detection based on installed
translators. Applications that explicitly set a layout direction and also
want translators installed afterwards to take effect should reset the
layout direction to Auto, which is now no longer a no-op.
Fixes: QTBUG-100632
Pick-to: 6.3
Change-Id: I1fdcebd43a9b1b468ff95bf15f53f441bb214e08
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This format will be changed by the next commit. Also it is an
implimentation detail that can be changed at any time.
Task-number: QTBUG-95889
Change-Id: I00b1133078f1035e03e2cd6fae28192de54d2154
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Hiding a row in a form layout is inconvenient to do as access to the
widgets in each row is cumbersome. In addition, a row might include a
layout for the label or the field column, and we can't hide layouts and
instead need to navigate to the widgets inside the layout. And even if
an application developer does all that, the spacing calculation doesn't
ignore hidden rows.
Add setRowVisible and isRowVisible APIs with the usual overloads.
Implement the logic to traverse a layout item to its contained widgets,
so that they are explicitly hidden when a row is hidden, and skip hidden
rows in the spacing calculation.
[ChangeLog][Widgets][QFormLayout] New APIs setRowVisible and isRowVisible
to hide and show rows in a form layout.
Fixes: QTBUG-6864
Change-Id: I6af98409802f331c4523e91d7dac8a97762c579d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The test is not only flaky on Windows 10 but also on Windows 11.
Pick-to: 6.2 6.3
Task-number: QTBUG-100412
Change-Id: I27e8179dafd4743c3eaf2c0dd8b70b804612c7c2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
tst_qtextdocument was disabled because it crashed.
It does not any more.
Task-number: QTBUG-87671
Pick-to: 6.2 6.3
Change-Id: Ie1bd75c21e481c2ecb8607c04ce9370fc6d7b00e
Reviewed-by: Samuel Mira <samuel.mira@qt.io>
Reviewed-by: Pekka Gehör <pekka.gehor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qgraphicsview was disabled because it crashed.
It does not any more.
Task-number: QTBUG-87671
Task-number: QTBUG-87397
Pick-to: 6.2 6.3
Change-Id: Ib604274d098c271e22b010e6cb822fdf9553df1c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Samuel Mira <samuel.mira@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
There was a test for Qt4 compatibility in tst_qheaderview.
We don't run it since Qt 6.
This patch removes the unused code.
Change-Id: I751829ac5a142e79379e81e9e739107544cf7406
Reviewed-by: Arnaud Bienner <arnaud.bienner@gmail.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Currently test relies solely for external test server. This makes it
not possible to run test successfully with environment where docker is
used.
Pick-to: 6.2 6.3
Change-Id: Ie2974a0e2fec9b16d9d023730b76fa2a32f77e65
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
As QNX claims to support abstract Unix-domain sockets, its getsockname
always returns for socket that has not been bound to local name
address_len of sun_path as maximum length (106) even when it does not
contain valid address.
https://www.qnx.com/developers/docs/7.1/index.html#com.qnx.doc.neutrino.lib_ref/topic/u/unix_proto.html
Pick-to: 6.2 6.3
Change-Id: I0f0f5c05611c8db6af35377dde16450f58c83c56
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Just as a minor debugging helper: when warning that an invalid
regular expression object is being used to match, also print
the used regular expression pattern.
Change-Id: I0f99bcf4ca87ec67d04ed91d9dc315814f56d392
Fixes: QTBUG-76670
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The view.resize() command has no effect if the requested
size is smaller than the screen. So the view has space for
the whole model. It then won't scroll, so scrolling cannot
be tested.
This patch enlarges the model so that scrolling is always
necessary and thus possible.
Task-number: QTBUG-87407
Pick-to: 6.2 6.3
Change-Id: Ibff512158d9c16be120a69c7328b6d0ae2c3b551
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Some tests were blacklisted, but the problems cannot be reproduced
any more. This patch activates them.
Fixes: QTBUG-87404
Pick-to: 6.2 6.3
Change-Id: I5944c750a5717daaf43a22d6d1fa51ae54fc3da2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qopenglwidget was disabled because it crashed.
It does not any more.
Task-number: QTBUG-87671
Pick-to: 6.2 6.3
Change-Id: I7ea55f262f362c098b52e1b1a319b26c31a7e067
Reviewed-by: Pekka Gehör <pekka.gehor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qdom was disabled because it crashed. It does not any more.
Task-number: QTBUG-87671
Pick-to: 6.2 6.3
Change-Id: I41117938fe9d93b510c4a60beb4c2f5b20991434
Reviewed-by: Pekka Gehör <pekka.gehor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Port the test to use the QWindow* based overloads of QTest::mouseMove()
and move the cursor away.
Pick-to: 6.3
Task-number: QTBUG-98489
Change-Id: Id1ac0ef176c6f9bf179f989ddd5775877525fc0d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Makes it easier to interpret the output from the test, because of
embedded newlines.
Pick-to: 6.3
Change-Id: Ic15405335d804bdea761fffd16d4f141e09537f4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Simplifies the code. And removes the unnecessary quote around the
pattern that was there, for some reason.
Pick-to: 6.3
Change-Id: Ic15405335d804bdea761fffd16d4f135edf6993b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The redirect handling for http2 was a little simple. E.g. not handling
relative URLs.
Fix this using the redirect response parsing function which the http1
protocol handler already uses.
Fixes: QTBUG-100651
Pick-to: 6.3 6.2 5.15
Change-Id: Ic0cec4cacc92707e7a7fde1f4665f80995a6057e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test always fails when either the Xcb or UNIX, one of the Windows
event dispatchers is used. So only test for the event dispatcher name,
which then covers all platforms, including QNX and INTEGRITY (which
use the UNIX event dispatcher).
Pick-to: 6.3 6.2
Change-Id: I2e315831b53f823c5496ad0319319df78f064cc1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
Bring out the asymmetry between date and time more clearly; when date
is valid, an invalid time is ignored in favor of QTime(0, 0). At the
same time, eliminate an un-needed variable from the code that
implements this special handling. (Left over from when the QTime was
passed by const ref, rather than by value.)
Change-Id: I81d8a9026cbb7887a8c638a2761b3db54c088af7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It can now use startOfDay()/endOfDay() for the end-points of its
search range; and it should check transit is not empty before
dereferencing transits.at(0).
Change-Id: Ib1568f4d8d6ce301d601071bb58185be906c631a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- ICU is not supported by backend.
System supports only a simple named UTC time zone implementation(see QUtcTimeZonePrivate)
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I4a87fc3d5484d75d55890bf88d012955e5048a0b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Relying on string manipulation leads to -Wredundant-parens warnings in
the best case, and to non-compiling code (when using typedefs) in the
worst case.
We can avoid both issues by simply generating code that uses
add_pointer, which takes care of reference types (even typedef'd ones),
and creates no warnings about parens (as we don't write any anymore).
Fixes: QTBUG-100915
Pick-to: 6.3 6.2
Change-Id: Ic5b1cbfda20d920d11f51beeb62e9479261d5f00
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Moved to after the header is actually written, not just generated.
For requests with data (put/post) we may have to wait for a callback
before the data to write is available. Since we then delay writing the
header as well it would be disingenuous to emit requestSent().
Pick-to: 6.3
Change-Id: I76c2d40ca48faaa1f6730ce8b3d5a8a4c3156f8f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Some of the UI elements in the a11y tests are allocated dynamically,
which means that if the test fails, the element is not destroyed
properly. As a result, the "hanging" UI elements affect all the
following tests, which leads to more test failures and even hangs.
This patch wraps all such allocations into smart pointers, which
guarantees correct destruction in case of test failure, so that other
tests are not affected, and also prevents memleaks.
As a drive-by:
- use nullptr instead of 0 in constructors;
- create some objects on stack instead of dynamically allocating
memory for them;
- remove some unneeded 'delete' calls for the objects that belong
to QObject-hierarchy.
Task-number: QTBUG-87674
Pick-to: 6.3 6.2
Change-Id: I0dcc26990955cd7b240a689a7438880b686985b7
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
These tests rely on reading output sent to stderr, so make
sure their output does go there.
Pick-to: 6.2 6.3
Change-Id: If62c073101c1d2e3d64f8cb2769d67f3b9fbeefb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The hugeQImage test loads, as its name suggests, a huge image.
At 2.5 GiB it's too big for the hard-coded 1 GiB limit on RAM
that the QNX toolchain hard-codes when it's started in QEMU.
Pick-to: 6.2 6.3
Task-number: QTBUG-100929
Change-Id: I8e8caaff7fd1dd0e648ada5df613c793f72bcf5d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Fixing documentation and removing tests.
[ChangeLog][Important Behavior Changes] The qNextPowerOfTwo()
functions now have preconditions.
Change-Id: If6d5e8bee66826910e89be7cac388a1f0422ebfd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
More mindless coding-style conformance. Includes moving & or * to
after the space, not before, in declarations; and spaces after commas.
Change-Id: I221fef1e4de69d6c55d33dfc533aa74e2fd72df0
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
With one exception: in a macro-definition with a backslash-newline
immediately following the open-parenthesis.
Change-Id: I0fc8d7492676402636785d571e4667881334af6a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Simply if (!condition) QSKIP(...) instead of having a long block
depend on the condition with the QSKIP() in its else block (which
should have had braces, as it was).
While dedenting the code block, tidied up spacing: only include blank
lines where they break up the code into blocks that go together, don't
leave spaces just inside parentheses.
Change-Id: I0196150088be88a7c6073b997a315b8f14d5f392
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Use QVERIFY() rather than comparison to true; QVERIFY() the negation
rather comparing to false; prefer QCOMPARE() otherwise for
comparisons, except for a few special cases involving very long
strings. Fix up the phrasing of a few QSKIP()s in the process.
Also, QCOMPARE() can handle an enum as expected value without
int-casting.
Change-Id: I9a1b82e5f4e10df6427bcc184b7757737df7db4f
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
In some cases by adjusting where the splits happen within concatenated
strings.
Change-Id: I4cffc41cda4582654151ba45d1478285caee7c81
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Prefer pre-decrement over post-decrement, turn a while into a for,
Don't put a while's body on the same line.
Change-Id: I5653a9bcec7901d205a91927c4b08e3dc13e0ca6
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reflowed some over-long ones, fixed some typos, capitalise starts of
sentences (and end them with suitable punctuation). Removed one as
redundant, made another pair redundant by changing the code (use an
overt NaN instead of commenting that it's happening). Prefer C++-style
when single-line. Don't pretend to be QDoc comments, or have other
eccentricities about start-markers.
Change-Id: I5a30e1b22a08866124f09060bb35f5bd27cd443b
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Much of the test code simply had a blank line after each check. Keep
the ones that separate groups of related statements, but remove the
ones that separated members of such groups. In some cases swap a blank
line and a code line to put the code with things it relates to.
Change-Id: Ie33863080d407898b2b2f044599398980ab9793d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Split some long declarations of two variables in one line into two
separate declarations. Made more things const, made some consts
constexpr. Skip a variable entirely when it's only used once (and not
giving us some other benefit). Moved some declarations closer to their
variables' first uses.
Replace some Capitalised variable names with lower-case ones.
Change-Id: I3b8dac46530ba1c2e6100cb007b5487253304526
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
It saves the conversion to UTF-16 until the formatting. Split up long
lines, purge spaces just inside parentheses, and otherwise tidy
affected lines. Don't use backslash-newline for line continuation
within string literals; juxtaposition is cleaner.
Change-Id: I9c3d3e33f5ecbdb530538679147f7bc32afbeb05
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
It's terser and cleaner to read. Likewise for
QString::fromLatin1(). QCOMPARE() can take a QStringView, hence u"..."
as its expected string; other uses need u"..."_qs.
Change-Id: Iaf96569ff3ce69c890badfb6e40f702a78b100b3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Marc alleges it is more efficient.
Corrected part of a message to be more accurate in the process.
Save some casting by using suitable format specifiers.
Change-Id: Ic31a4e17b8910d35781a494ec860c7a08f08f33b
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
When the format is an ASCII string, there's no point widening it to
UTF-16 before the actual formatting step. Also, don't construct the
format string using string arithmetic, when passing another parameter
to arg() will do just as well. In the process, restructured
generic_data(), split long lines and conform spacing to Qt coding
style on affected lines. Simplified initialization of two string
fragments by using QL1S instead of QString, too.
Change-Id: Ib101dcf9296cc532291518bcef8e0a8de597b8a0
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
In tst_qguiapplication and tst_qcoreapplication,
the application version should be set. On Android, this
is done using QT_ANDROID_VERSION_CODE.
Pick-to: 6.2 6.3
Change-Id: I6b473ad25092fb24df9400e0ab8fbb8ea4edbb6a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Tests are run for QNX in qemu similar to b2qt currently (using offscreen
plugin and software rendering). So the issue is same.
Pick-to: 6.2 6.3
Task-number: QTBUG-100930
Change-Id: Ie973c6c611ac48703fd7cce53925940b80858bc8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
on Wayland
Task-number: QTBUG-100891
Pick-to: 6.3 6.2
Change-Id: Iadf12364ded4549988ad75a9487c7e96e963a956
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Scroll tests relied on having a small window. On Android, the
window can not be smaller than the screen.
This patch changes the tests so that the windows have large
enough content so scrolling can happen.
Fixes: QTBUG-87408
Pick-to: 6.2 6.3
Change-Id: I26a444518fd934527089297c594673937f0ecf88
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qabstractitemview requires a movable cursor.
This patch skips the test if there is no movable cursor.
Pick-to: 6.2 6.3
Fixes: QTBUG-87400
Change-Id: I4e917b2ad062ce068f23603410aa9209edb9828d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Adapt QToolButton texts to descriptive versions.
Add dummy stylesheet that will be used for all test functions, and a
specific style sheet to test rendering of QToolButton with a menu button.
Task-number: QTBUG-100401
Pick-to: 6.3 6.2
Change-Id: I5440407ddb3ea5b45124e77a6f0d1013362b4398
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Issue introduced by commit 465701bb98.
[ChangeLog][QtCore][QMetaObjectBuilder] Fixed a bug that would cause
addProperty() to use the incorrect type for the property if the
property's name matched a valid type registered with QMetaType.
Pick-to: 6.2 6.3
Change-Id: Ic15405335d804bdea761fffd16d402f2c9611f30
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Inline the content to avoid a round-trip through qjsonarray.cpp and
qjsonobject.cpp.
This change revealed an inadviseable unit test check that dereferences
the end() iterator to get its type. I haven't changed it, but have
marked with ###. I also fixed a likely copy&paste mistake in that test.
Change-Id: I89446ea06b5742efb194fffd16bb774f3bfbe5f5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Commit 35adb74ddd ("Reimplement JSON
support on top of Cbor") accidentally forgot to multiply by 2 the index
stored in the QJsonObject::iterator. The same mistake was propagated
when QJsonObject::iterator was converted to QJsonValueRef. This had no
ill effects because the o->elements container would always contain more
elements, but it meant the check was ineffective and meant nothing.
So instead of doing nothing when the iterator does not point to this
container, simply assume it does. Bad things will happen if you try to
erase an iterator that points to another container, but that's true for
almost all container/iterator mechanisms.
Drive-by modernization of some of the surrounding lines.
Change-Id: I89446ea06b5742efb194fffd16bb7c322c2fc4f2
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The 0x10000 limit should not apply if the key is a valid index in the
array.
Change-Id: I5e52dc5b093c43a3b678fffd16b6a2a5a69acd61
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
I screwed up when I wrote QCborValueRef by not having the ConstRef
type. The code worked, but it wasn't const-correct, allowing you to
write:
const QCborArray &arr = something();
*arr.begin() = QCborArray();
This mistake was brought over to QJsonValue in Qt 6.0, so it has to be
fixed for QJsonValue too. The actual fixes are in the next couple of
commits.
This change is believed to be binary-compatible: the Q{Json,Cbor}ValueRef
classes continue to have the exact same size, except that they're now
empty and have a new base class. They weren't trivial before this commit
doesn't change that.
[ChangeLog][Potentially Source-Incompatible Changes] The iterator
classes for Qt's JSON and CBOR containers (array and map/object) had a
const correctness issue which allowed a const_iterator to mutate the
container being iterated on, even if that container was itself const. Qt
6.4 has a fix for this, but will cause compilation issues where
QCborValueRef and QJsonValueRef were used where the correctness could be
violated. To keep code compiling with both 6.3 and 6.4, either change to
non-const iteration or replace the QxxxValueRef with a const QxxxValue
reference. This change is binary-compatible.
Change-Id: I5e52dc5b093c43a3b678fffd16b6063333765ae0
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The flag IsContainer was not set, causing the QCborContainerPrivate to
become confused.
This commit also expands and subsumes the existing test for QCborValue
(non-Ref).
Change-Id: I5e52dc5b093c43a3b678fffd16b6a17c6f4a0676
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This has found several missing const qualifications, a missing
QCborMap::Iterator method, and a missing one in QCborValue too.
The methods "### TEMPORARY" in this commit are actually removed in two
commits.
Change-Id: I5e52dc5b093c43a3b678fffd16b6939f62954dc4
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
- New testcase tst_eventdispatcher added under commit d292f0143f.
It shows that only glib implementation works correctly.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I7b861a6207fcb319de362645fc8f00a8ab6cd4b9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Single-line bodies of single-line controls don't need braces.
If one block of an if/else chain needs braces, the rest get them too.
One long condition needed a split that forced its body to need braces.
Change-Id: Ic4116b1273e16a586fdec18e6d8228e48a9cb07c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This saves repetition of the call in the midst of query strings.
This incidentally makes it possible to give informative names.
In the process, build those query strings using QLatin1String::arg(),
instead of implicitly converting ASCII strings to QString in order to
then do arithmetic with them, at least when the arithmetic involves
more than one addition. In one instance, where two branches did the
same thing with different format strings, limit the branching to
selecting which string to use, then do the common thing once.
Change-Id: I60fd7457a727bcc3872d3052d8fd638ebaf36ac2
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Use initializer lists rather than << entries.
Use arrays where we don't need the lists at all.
Make them const when they can be.
Replace foreach with ranged-for.
Use auto rather than naming iterator types and save end() at the start
of the iteration to save re-requesting it each time round the loop.
Reverse arguments to a QCOMPARE() as actual should come first and
expected after, not the other way round. Change some casts from
C-style to type-as-function-style, use QString literals rather than
C-string literals that would need conversion at compile time and
QLatin1String::arg in preference to arithmetic where the same format
is duplicated.
In the process, reworked one test to put its two iterations, one over
good query strings, one over bad ones, into separate blocks using
separate const arrays, instead of reusing a list with an uninformative
name.
Change-Id: I4a272be3eb58e9dca136238277b92379d6ca076d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The loop used an int counter that was initialized from a size_t,
provoking a warning from MSVC. Since the indexing is irrelevant in any
case, use a ranged-for loop. Since the loop was formerly in decreasing
index order, reverse the table being iterated so that entries remain
in their prior order.
Change-Id: I79b93c5a3f39a502b0cae83215b8e3665d0e17f5
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
[ChangeLog][QtGui][QDesktopServices] URL handlers that have been passed
to setUrlHandler() must now be removed by calling unsetUrlHandler()
before they are destroyed. Relying on the handler's destructor to
implicitly unset it is now deprecated, because it may already be in use
by concurrent openUrl() calls. Support for implicit unsetting will be
removed in 6.6 and, until then, a qWarning() is raised if it is
exercised.
Fixes: QTBUG-100775
Fixes: QTBUG-100779
Pick-to: 6.3 6.2 5.15
Change-Id: I0c4f91b78f847b135fdeb38766babc892bdc1379
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
tst_qcoreapplication.cpp is used both in tst_qcoreapplication and
tst_qguiapplication. To distinguish these two compilations,
the define QT_GUI_LIB was used. This led to an error on Android,
where Qt::Gui is always linked, because the Qt Android Platform
Plugin needs it.
This patch introduces the preprocessor define QT_QGUIAPPLICATIONTEST
which is to be used only in the compilation of tst_qguiapplication.
This is then used instead of QT_GUI_LIB.
Change-Id: Ifa5bfacb197d68365288c1da85573106515fc6c2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If adding a QLineEdit to a QGraphicsScene as a QGraphicsProxyWidget, the popup
completion of that QLineEdit is drawn in the wrong location. When the completer
getting the rect of screen, it gets the rect of the QGraphicsScene where
QLineEdit is located rather than the rect of the screen, resulting in an error
in the following calculation.
Note that as long as the completer popup is a toplevel widget not parented
to the target widget, it will not be automatically embedded into the graphics
view via QGraphicsProxyWidget. So with multiple views for a scene, or in views
that use transformations, the geometry will still be off.
Pick-to: 6.3
Task-number: QTBUG-20531
Change-Id: If5d8a707ca35a9e4709117b077978145c6143e46
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
tst_QFutureWatcher was deactivated for Android. This patch activates it.
Fixes: QTBUG-88136
Change-Id: Iead82e22d73eb15c9ecd2756eb33925910bbffc0
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
- current INTEGRITY development pack don't support denormals for float and double.
All values are rounded to 0.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: Iaaacdc4210c7ac2ec3ec337c61164a1ade0efb01
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... which implements or assumes something about the
broken^Wnon-STL-compliant insertion behavior.
Once this has integrated into all module dependencies, we can
re-implement these APIs using STL-compatible semantics.
Task-number: QTBUG-100092
Change-Id: I54f4f5ce7addd9543866d2c399f48aff50983b88
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Even QtCore alone cannot be built without the properties feature since
Qt 5.5. While fixing this is easy, other modules like dbus,
networking are also using QObject::property() and friends liberally.
All in all I doubt that anybody will miss the feature (otherwise it
would have been fixed in the last decade).
Change-Id: Iaf3cc20bda54ee2ff3b809fac8fa82b94ecc88c0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The macOS standard library doesn't have std::contiguous_iterator yet, and
it doesn't seem like libc++ has it either.
Checking __cpp_lib_concepts for the C++20 official version appears to work.
Pick-to: 6.3 6.2
Change-Id: I8c31cd64de24c03b3a3f37cb393bb2f9b55a834d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Remove Integrity and Android specific code that explicitly adds
test data to the resource files. qt_internal_add_test functions
implicitly adds test data to resources for Android and Integrity
platforms by default.
Change-Id: Ia1d58755b47442e1953462e38606f70fec262368
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Multiple tests use qt_internal_add_resource that copies the
functionality that is already implemented inside the
qt_internal_add_test function. Simplify these test by replacing
the qt_internal_add_resource call with the new BUILTIN_TESTDATA
option.
Change-Id: I18475b817d6f87264f0de53817d6c26c5ccab4e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Size a QMdiSubWindow is no real toplevel widget, QLayout::activate() did
not properly set the minimum size based on it's children. Fix this by
treating a QMdiSubWindow as a toplevel widget during the calculation.
Fixes: QTBUG-100494
Change-Id: Ia2e6c519c7214c36383facd244711bd932231d40
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If one calls setPlainText("") before setting a placeholder text,
the placeholder visibility is not updated, and the placeholder is not
visible. Fix it by updating placeholderVisible properly.
Fixes: QTBUG-96212
Pick-to: 5.15 6.2 6.3
Change-Id: I1bd3f0cb4c59973a847bcf3787e35d7c17b6d673
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In one case, cast an int to qsizetype rather than the other way round,
in order to compare them.
Change-Id: Id8dffe61f9565040f1a5ee24867956397f814a55
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Some of the else if lines exceeded 100 characters, so should have been
split; and some lines already were split. So each whole chain should
have had braces on its bodies. Instead make it a switch, as this makes
it more evident what's going on in any case. Furthermore, as each
branch did the same thing with dbType-specific strings, change to just
setting QLatin1String variables, so that the rest of the code needn't
be duplicated in each branch; it can simply be done once after the
switch, using the string's .arg() to embed fragments. In the process
break up the SQL query strings more gracefully, purge spaces just
inside C++ parentheses.
Change-Id: Ie26166e098ad74720bb6d7c4d9fe47718c33a13c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Telling us the condition tested should have been true is what
QVERIFY() does anyway, so don't go to the whole trouble of saying the
same thing - and wrapping it in in a QString() merely in order to then
qPrintable() it back out again, pointlessly converting a C-string to
unicode and back again.
At the same time, skip one other qPrintable(QString("...")) without
.arg() formatting; and change the check it's the message for to use
QL1S::arg() instead of QString::arg().
Change-Id: Ie71a79da8017916d301a38b69fc422e55a5a3649
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Expected warnings are clutter for anyone reding the output, so
suppress them when they're correct behavior.
Change-Id: Idf47ba4fab8069237067d9b20afef3041e0c2f8c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Doing the tidy-up after the last check has the problem that it gets
skipped if any check fails, as the premature return skips the tidy-up.
In the process, added the missing tidy-up to prematureExec().
Repackage the code for one tidy-up as a named lambda so that the
duplicate can share it with the scope guard. Made some existing scope
guards const, while I was about it, so that the one that isn't -
because it gets dismiss()ed - stand out.
Change-Id: I96d6834d5d7675f15018169a7093b0211db6f8a9
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Raster pipeline is not supported on webOS OSE: trying to use it causes
an exit(1).
Fixes: QTBUG-100654
Pick-to: 6.3
Change-Id: I00325fc1330a2d0d4abfdee054343ecfac767309
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
[ChangeLog][Potentially Source-Incompatible Changes] The qtextstream
header no longer includes <QString>, <QStringEncoder> and
<QStringDecoder>. Code which relied on the implicit inclusion of those
classes might now need to include the headers explicitly.
Task-number: QTBUG-97601
Change-Id: Ifb8c8452026195a772c0588dbbbc53fb51cac548
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use custom script to copy big Android artifacts on Windows platforms.
The script uses 'copy' but not 'copy_if_different' when source file
size is bigger than 2GB. 'cmake -E copy_if_different' only compares
first 2GB of files because of cmake issue, so this step only
workaround the problem.
Pick-to: 6.2 6.3
Task-number: QTBUG-99491
Change-Id: Id076734700e334dfc3330da412462c2b53829b33
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It only stores one layer of state, and pausing twice in a row will just
overwrite the previous state. This doesn't happen often but can happen,
especially on Windows if a certificate needs to be looked up in the system
certificate stores (socket gets paused) and then a recoverable error
occurs in QNAM (socket gets paused again).
Fixes: QTBUG-100362
Fixes: QTBUG-63196
Fixes: QTBUG-98476
Pick-to: 6.3 6.2 5.15
Change-Id: Ie524c48e11b6fa8010b78cc1bf3931efe2ce3351
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
No need for a virtual do-nothing destructor in a class that isn't
inherited from. Defining an empty init merely makes QTest go to the
trouble of calling it, which it could just as well skip.
Change-Id: Ifd44c473c05fdeaaa7923d2ccdd0a13c8921b6bd
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The offset fields for tst_QTimeZone::specificTransition() had a
comment claiming they are in minutes; they are in fact in seconds, so
fix that. At the same time, Moscow hasn't had a time-zone change since
2017, so the end-date for one of the test intervals can be nudged a
little closer to the present without harm.
Change-Id: I66822cb758f7e00d6added801466a6745be3e31a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Unless "." (or the empty string) is in $PATH, we're not supposed to find
executables in the current directory. This is how the Unix shells behave
and we match their behavior. It's also the behavior Qt had prior to 5.9
(commit 28666d167a). On Windows, searching
the current directory is the norm, so we keep that behavior.
This commit does not add an explicit check for an empty return from
QStandardPaths::findExecutable(). Instead, we allow that empty string to
go all the way to execve(2), which will fail with ENOENT. We could catch
it early, before fork(2), but why add code for the error case?
See https://kde.org/info/security/advisory-20220131-1.txt
[ChangeLog][Important Behavior Changes] When passed a simple program
name with no slashes, QProcess on Unix systems will now only search the
current directory if "." is one of the entries in the PATH environment
variable. This bug fix restores the behavior QProcess had before Qt 5.9.
If launching an executable in the directory set by setWorkingDirectory()
or inherited from the parent is intended, pass a program name starting
with "./". For more information and best practices about finding an
executable, see QProcess' documentation.
Pick-to: 5.15 6.2 6.3
Change-Id: I54f205f6b7314351b078fffd16cf7013c97ee9fb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In C++20, any given relational operator is also considered in its
reversed form, so e.g.
given op==(X, Y)
and X x, Y y, then y == x will compile, by using the reversed op(X, Y)
This, unfortunately, makes some existing asymmetric operator overload
sets ambiguous, and instead of applying tie-breaker rules, at least
Clang is warning about these.
For us, this means we need to make our overload set non-ambiguous. The
QJsonValue{,Ref} classes failed this, because they only provide the
following member-operators:
- QJsonValue::op==(const QJsonValue&) const
- QJsonValueRef::op==(const QJsonValue &) const
For member functions, there are no implicit conversions on the LHS. So
in C++17, we have a nice dichotomous overload set:
- LHS is QJsonValue -> use QJsonValue::op==(QJsonValue)
- LHS is QJsonValueRef -> use QJsonValueRef::op==(QJsonValue)
In both of these, it the RHS is a QJsonValueRef, it's implicitly
converted to QJsonValue for the call.
Enter C++20, and the reversed signatures are suddenly available, too,
which is a problem for QJsonValueRef <> QJsonValueRef, which could be
resolved, as in C++17, using
lhs.QJVR::op==(QJV(rhs))
or it could now be
rhs.QJVR::op==(QJV(lhs)); // reversed
Says Clang 10:
tst_qtjson.cpp:990:5: warning: ISO C++20 considers use of overloaded operator '==' (with operand types 'QJsonValueRef' and 'QJsonValueRef') to be ambiguous despite there being a unique best viable function [-Wambiguous-reversed-operator]
CHECK(r0, a0, r1);
^ ~~ ~~
qjsonvalue.h:189:17: note: ambiguity is between a regular call to this operator and a call with the argument order reversed
inline bool operator==(const QJsonValue &other) const { return toValue() == other; }
^
A similar argument makes op!= ambiguous.
Says Clang 10:
tst_qtjson.cpp:988:5: error: use of overloaded operator '!=' is ambiguous (with operand types 'QJsonValueRef' and 'QJsonValueRef')
CHECK(r0, r0, r1);
^ ~~ ~~
qjsonvalue.h:190:17: note: candidate function
inline bool operator!=(const QJsonValue &other) const { return toValue() != other; }
^
qjsonvalue.h:189:17: note: candidate function
inline bool operator==(const QJsonValue &other) const { return toValue() == other; }
^
qjsonvalue.h:189:17: note: candidate function (with reversed parameter order)
To fix, provide the missing operators as free inline functions (so Qt
6.2 and 5.15 don't get new symbols added) so there's always exactly
one best match.
This is a fix for 6.2 and 5.15. At the time of writing, 6.3 isn't
released, yet, so there, we could QT_REMOVED_SINCE the pre-existing
member operators in favor of hidden friends (as per QTBUG-87973).
Use C++17'isms to prevent an automatic merge to 5.15, which requires
contains(QT_CONFIG,c++2a):CONFIG += c++2a
added to tst_qtjson.pro.
[ChangeLog][QtCore][QJsonValue] Fixed relational operators to not
cause warnings/ambiguities when compiling in C++20.
Pick-to: 6.3 6.2 5.15
Change-Id: Ic70f3cad9987c87f7346d426c29cc2079d85ad13
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Amends d42cfeb84f, which would result in
infinite recursion when the Edit menu was populated and added to the
menubar after the menubar has been shown.
Add a macOS-only test case that reproduces the crash without the fix.
Fixes: QTBUG-100441
Pick-to: 6.3
Change-Id: I018a7aa7f01558a3b9732b4d6d96a911dc7fbd19
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add baseline tests for QListView, QTableView, QTreeView
Add const to reflect number of available standard icons
Add baseline test for QLineEdit
Task-number: QTBUG-99677
Change-Id: I1abaae7f90c9b05c3b3467dc85c5652bc9d0f53b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The value of __cplusplus has nothing to do with whether the library
implements wg21.link/P1115 (libstdc++ even before C++20) or not
(libc++, even in C++20).
Use the idiomatic check (#if defined(foo) && foo >= x) instead,
fixing the Android build.
Pick-to: 6.3 6.2
Change-Id: I11bcefe455a1f13865c15d4beecbd3fe32115328
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
moc, qmake, rcc, and uic tests execute corresponding tools inside
the test executables. This adds dependencies explicitly, to execute
tests using _check targets, without the need to manually build
dependencies.
Pick-to: 6.3 6.2
Fixes: QTBUG-98576
Change-Id: I8b989276e21199b867591f7b0f6af9204695ac13
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
To clarify its purpose and separate it from the others
Pick-to: 6.3
Change-Id: Id9efcf474ac0cd8777393380bb85c83780454005
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
CI tests for QNX are run in QEMU which does not have enough RAM
to run this test successfully.
Pick-to: 6.2 6.3
Change-Id: Idab3e8b6a1e0ae3eddf5aedb82e6784a74ae9a3a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
There is a TODO for this in Qt Quick from the 6.0 times. To decide
upfront if Metal can be expected to function, or if a fallback to
OpenGL needs to be triggered (especially important with macOS virtual
machines, where, unlike any real macOS system, Metal may not be
present at all), the scenegraph calls create() and then drops the
result. The idea to make this less wasteful was back then to add a
dedicated probing function which can, possibly, perform the checks in
a more lightweight manner than full initialization. Implement this
now, focusing on Metal.
Brought to attention by QTBUG-100441: printing warnings about not
having an MTLDevice is confusing in a Metal-less macOS VM, because it
is not an actual error, only part of the probing at scenegraph
initialization. We can now avoid printing confusing warnings there.
Change-Id: Ie52c36af9224bedc3f5e4c23edb486d961c9f216
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The auto-repeat timer of QScrollBar kicks in after 50ms, so if the test
takes too long and the timer fires during the qWait call or during event
delivery, then we might get multiple valueChanged emissions.
Detect that scenario and allow the test to XFAIL if things take
a significant time (more than 40ms vs the expected 1ms).
Pick-to: 6.3 6.2
Change-Id: Ie90aadc62372397db695fd2b34fe1f5252ce8d37
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Create QAbstractSpinBox test
Update test for QSpinBox
Add tests for QDoubleSpinBox, QDateEdit, QTimeEdit
Add test for QDateTimeEdit incl. calendar popup
Task-number: QTBUG-99677
Change-Id: Ia74686f47a1520ab4c7e878b19fc774e00db88dd
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
