This section did set some canBuild* variables based on compiler
checks. Apart from canBuildQtConcurrent, the variables never
got used. In the QtConcurrent case, the answer will anyway always
be yes, since we require a c++11 compliant compiler nowadays.
Change-Id: I660b40e96a657f6fa4d32f6b680adf44e70509c9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
These tests are not required to build qmake, so move them
together with the other tests.
Change-Id: I191e7552e819e8d68a27da3ac1b5258d57145155
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Instead show LGPLv3 and GPLv2 as valid options for the
open source edition.
Change-Id: Id7a203226428031ec873cbaf106dca14a854f155
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Preparation for Apple tvOS support, which shares a lot with the iOS
platform.
Change-Id: I543d936b9973a60139889da2a3d4948914e9c2b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
-ldl option was used unconditionally while libdl is not supported
when libc is static.
Add build test to configure which checks if libdl is supported.
QMAKE_LIBS_DYNLOAD in "src/corelib/plugin/plugin.pri" is now used only
if libdl is available.
qt_linux_find_symbol_sys from qlibrary_unix is now used only if
QT_NO_DYNAMIC_LIBRARY is not defined.
Initially reported by Buildroot autobuilder here:
http://autobuild.buildroot.net/results/a85/a85a1839a45fb6102e53131ecc8f6dadf92bcdc2
Change-Id: I0397472456efdc4f3ab5f24d01253bee8048a9d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
the presence of a [Paths] section causes QLibraryInfo to derive all
property values according to the Qt default directory layout,
disregarding the compiled-in paths from configure. consequently, we need
to write them all to qt.conf as well.
Change-Id: I3558e9aef1fce956812ea91e216f53bf7934c285
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
there is no point in overriding the built-in defaults with the same
values.
Change-Id: I24f66b86f751f7044625b5256f3d979ece782cf7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
'local' is treated as a command, so its arguments need to be quoted,
unlike in a real variable assignment.
amends 4b557751e.
Change-Id: I5a4c929e52e2344a6129c8e9dd4c0c80cd408ff0
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The C++ standard says it must, but some badly-configured toolchains seem
to be lacking support.
In particular, for some 32-bit platforms without native support for
them, GCC implements 64-bit atomics via out-of-line functions in
libatomic. If that library is missing... well, then std::atomic 64-bit
doesn't work and we mustn't try to use it.
This was found when trying to compile Qt 5.6 for MIPS 32-bit:
Linking library libQt5Core.so.5.6.0
.obj/qsimd.o: In function `std::__atomic_base<unsigned long long>::load(std::memory_order) const':
/opt/poky/1.7/sysroots/mips32r2-poky-linux/usr/include/c++/4.9.1/bits/atomic_base.h:500: undefined reference to `__atomic_load_8'
.obj/qsimd.o: In function `std::__atomic_base<unsigned long long>::store(unsigned long long, std::memory_order)':
/opt/poky/1.7/sysroots/mips32r2-poky-linux/usr/include/c++/4.9.1/bits/atomic_base.h:478: undefined reference to `__atomic_store_8'
Yocto bug report: https://bugzilla.yoctoproject.org/show_bug.cgi?id=8274
Change-Id: I42e7ef1a481840699a8dffff140224d6614e5c36
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 3d7586b760)
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
This function is introduced to safely provide poll(2)-like semantics for
socket multiplexing on Unix-like platforms. For platforms where no poll
system call is available, an implementation based on select(2) is provided.
Change-Id: I320e97dae5924316675a74d1897c48cae292ac6d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][Platform Specific Changes][OS X] Configure with -no-rpath
will now yield Qt dynamic libraries and frameworks with an absolute
install name (based in -libdir).
OS X package managers like Homebrew install Qt in a fixed location. This
change simplifies deployment for such package managers and is consistent
with the default expectation on Apple platforms for libraries with a
fixed location to also have absolute install names.
While a relocatable installation (the default) also works in this
scenario, it requires all software that depends on Qt to be aware of
this and to embed a suitable RPATH into application binaries (which is
not automatic for non-qmake builds). This might not be true for some
select fallback search locations, but as package managers on OS X tend
not to use those, embedding an RPATH becomes practically mandatory. In a
default Homebrew installation, Qt is configured such that the frameworks
end up in /usr/local/Cellar/qt5/<version>/lib and that will be later
symlinked to /usr/local/opt/qt5/lib, both of which are not searched by
the dynamic linker by default.
Task-number: QTBUG-48958
Change-Id: I4395df98771e06a2ce8a293d11dc755bdc50757f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since 4f8c75acbd, we require HB>=0.9.42, which assumes
multi-treading support.
On OS X, -qt-harfbuzz is still required for AAT fonts support.
Change-Id: I2a95b2c245a1eb2c580306ede7ee4eb0c7727317
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
The part of qmodule.pri that is supposed to set QT_CPU_FEATURES ends up
missing in the output.
Change-Id: I30f3dbad5ac22d32e25d63037980dac370adc4ea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The platform is no longer supported or actively maintained, and is
in the way for improvements to the Unix event dispatcher and QProcess
implementations.
Change-Id: I3935488ca12e2139ea5f46068d7665a453e20526
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
instead of building host tools always in debug mode, follow the overall
build type, and provide an option to override it.
this supersedes the pre-existing -optimized-qmake option.
however, that option never existed in the windows configure, and this
legacy continues as far as qmake is concerned (msvc builds of qmake are
always somewhat optimized, but not mingw builds).
Change-Id: I42e7ef1a481840699a8dffff13fec2626af19cc6
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The major changes compared to the Gtk+ 2 version are:
* Everything is ported to modern Gtk/Gdk API.
* GtkFontChooserDialog is used instead of deprecated GtkFontSelectionDialog.
* Hiding buttons on dialogs (like OK/Cancel) is no longer supported, as it is
impossible to do that with dialogs using GtkHeaderBars.
* Some workarounds were added to the QGtk3Theme constructor to correctly work
with Gtk+ 3.
[ChangeLog][Platform Specific Changes] The Gtk+ platform theme has been ported
to Gtk+ 3.
Change-Id: Iacb01279b6432e0901e3bb1353d5792543cc76e4
Done-with: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
On RHEL 6.6, mysql_config --libs returns "-rdynamic" among other arguments.
The configure test (config.tests/unix/mysql) would end up passing that
to qmake. qmake responds with "***Unknown option -rdynamic ..."
Change-Id: Ib1300e62aec8a5d866359f3eaea88d9648c872b9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Qt now requires it.
We could try and run the common/c++11 test for MSVC too, but we know it
passes, so we won't bother and thus slow down the configure step.
Change-Id: Ib056b47dde3341ef9a52ffff13ef6b53b9f8bb65
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This also fixes the underlying cause of QTBUG-44039 and QTBUG-43885.
You can choose between system, qt, and no libdouble-conversion
support. If you choose "no", snprintf_l and sscanf_l will be
used.
By default, system double conversion is used if the system provides a
double-conversion library. Otherwise the bundled libdouble-conversion
is built. sscanf_l and snprintf_l are not used by default as the
planned "shortest" conversion mode to produce the shortest possible
string will give less precise results when implemented with snprintf_l.
Change-Id: I8ca08a0fca5c54cf7009e48e771385614f6aa031
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Windows' configure.exe supports -ltcg since several years,
this patch adds -ltcg to Unix's configure script.
Change-Id: I3f39086c67c3f4cacd252f63de30e3cfc4aa22bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
A wayland compositor on i.MX6 needs to create the wl_display
before creating the EGL display. This wl_display then needs to be
exposed so that QWaylandCompositor can use it.
Change-Id: Id60f6dd2fbba05140ca0671da6f17dbc2ecce3a3
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
This separation makes it possible to make a
canadian cross build of Qt on a linux build machine.
The canadian cross build requires an external Qt that
runs on the build system.
Change-Id: Ifd83a4c6376d3299647e74bb349a3452a6f433fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This commit removes the legacy ptrsize check, which was deficient
because it did not work for multiarch systems (when we supported fat
OS X binaries) and did not work for bootstrap builds because the size
might be different when cross-compiling.
Instead, let's rely on the predefined preprocessor macros to detect
correctly. As a nice side-effect, this fixes 64-bit Android builds
cross-compiled from Windows.
Task-number: QTBUG-48932
Change-Id: I1d0f78915b5942aab07cffff140f9a52b9342f23
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@theqtcompany.com>
This bug occurs if ./configure is called with -v on systems on
which fd proc entries point to the files/devices they are open
on instead of being magic nodes which would basically dup() the
actual fds (e.g., Linux).
In this case, the command "tee $tty" appends to /dev/stderr, which
may be already opened by the parent process. This breaks the log file.
Normally, the log file starts with
This is the Qt Open Source Edition.
...
but with `-v` flag it would start with output of awkprog and maybe
some zero bytes. Zero bytes are observed on Debian Wheezy.
DEFAULT_INCDIRS=...
...
^@^@^@^@^@^@^@^@^@^@^@^@...
Done running configuration tests.
...
To fix this problem, the output of `...` is saved to a variable, and
then eval'd and echo'd (if -v).
This solution was found by Tony Theodore.
https://github.com/mxe/mxe/issues/938#issuecomment-149770348
Change-Id: Id0c28598890e813774cc92f38ee46a0697b34e77
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The check was broken on non-bash and producing errors like this:
/home/louai/work/qt5/qtbase/configure: 4528: [: Illegal number:
Change-Id: I5e78ad002cd7cfb401f2646510e0923f77c55f98
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since the Qt headers require them now, we need to ensure that happens
properly.
Change-Id: Ib306f8f647014b399b87ffff13f14196c2c75bef
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We'll remove it in Qt 5.7, so people ought to be notified now.
Change-Id: Ib056b47dde3341ef9a52ffff13ef6caa91757a9f
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Redirecting on every command is wasteful.
Change-Id: I42e7ef1a481840699a8dffff1404fa0602805d1b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's easier to parse than qglobal.h. The objective is actually to have
macros with parts of the version number, so the major or minor numbers
could be used in other preprocessor macros.
Change-Id: I42e7ef1a481840699a8dffff1404eda1dd5c308d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
KMS is no longer a platform plugin so the relevant leftover bits are
now removed.
As the introduction of the EGLDevice-based backend for eglfs shows,
using DRM/KMS is not tied to GBM, separate buffer management
approaches, like EGLStreams, work fine as well. Therefore separate KMS
from GBM and remove the EGL and GLES dependency in the tests - this
way there is nothing preventing us from using GBM without GL for
example.
Change-Id: Id7ebe172b44b315f9a637892237d2bb62d99aed2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
For now we pick one crtc and find the corresponding layer. If this is
not desired, set QT_QPA_EGLFS_LAYER_INDEX to override the layer to be
used. Enable qt.qpa.eglfs.kms to get logs about the available layers.
Change-Id: I762783f960739e32966c8cde17d8f55fbe40091f
Done-with: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
-xvideo was not used even by Qt 4 for a long time.
-xinerama was used by the xlib plugin which was dropped
by e6a7a6a381.
Change-Id: Iea97f643570d98f84ad1ce6f16e911dc92d617b0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Instead of lumping both Objective-C (.m) and Objective-C++ (.mm) sources
into the same pile, passing them on to the same compiler as for C++ (CXX),
with the C++ flags (CXXFLAGS), we follow Apple's lead and treat them as
variants of the C and C++ languages separately, so that Objective-C
sources are built with CC and with CFLAGS, and Objective-C++ sources
with CXX, and CXXFLAGS.
This lets us remove a lot of duplicated flags and definitions from the
QMAKE_OBJECTIVE_CFLAGS variable, which in 99% of the cases just matched
the C++ equivalent. The remaining Objective-C/C++ flags are added to
CFLAGS/CXXFLAGS, as the compiler will just ignore them when running in
C/C++ mode. This matches Xcode, which also doesn't have a separate build
setting for Objective-C/C++ flags.
The Makefile qmake generator has been rewritten to support Objective-C/C++
fully, by not assuming that we're just iterating over the C and C++
extensions when dealing with compilation rules, precompiled headers, etc.
There's some duplicated logic in this code, as inherent by qmake's already
duplicated code paths, but this can be cleaned up when C++11 support is
mandatory and we can use lambda functions.
Task-number: QTBUG-36575
Change-Id: I4f06576d5f49e939333a2e03d965da54119e5e31
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
