URL schemes can only contain alphanumeric characters and all
protocols specify that they are case-insensitive. So instead
of doing case-insensitive comparison everywhere and then get
it wrong sometimes, better to lower-case it here.
Change-Id: I61f51a3f4c85b90af1586ebcf69608987fbe2ec3
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For asynchronous (overlapped) I/O notification on Windows one
can now use the convenience class QWinOverlappedIoNotifier.
It's using one global I/O completion port and a watching thread to
get notified when a read or write operation completes.
Change-Id: If6f904b364be0405580c7e50355529ab136ae3cb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
NTFS file access times are disabled by default since windows 6 for
performance reasons. The test now checks the registry setting and
reports XFAIL if access times are disabled.
Change-Id: Ia84ed0c8736e6c7d5817425006f6115d9f3e70a4
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Due to unconditional waits this test always needed 120 seconds to pass.
Now we're using QTRY_VERIFY and make sure that we write the data before
the process got killed even in the cases 3 and 4.
On my machine this test now takes 8 seconds.
Change-Id: I606a8b43ba4c97704be5202a6c5d8d1c75337f9c
Reviewed-by: Bill King <bill.king@nokia.com>
QBool was introduced with Qt-4.0, to detect Qt3-like code like
if (c.contains(d) == 2) and break compilation on such constructs.
This isn't necessary anymore, given that such code couldn't possibly
compile in Qt4 times.
And QBool was confusing developers, and creating compile errors (e.g.
QVariant doesn't have support for it), so better remove it for Qt 5.
Change-Id: I6642f43f5e12b872f98abb56600186179f072b09
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Qt now treats neither NTFS junctions nor mount points as symlinks.
Task-number: QTBUG-20431
Change-Id: I93f67d7438d441ceb53308d4a1f29335beedd547
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
We agreed on treating neither junctions nor mount points as symlinks.
This will be handled in another commit.
This reverts commit 1656c4780c.
Change-Id: I41a87b6df9f7fba333df4c967ee9f0c1f3940952
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
NTFS mount points are not treated as symlinks, because they might
not have a link target.
This is the case when a volume is mounted as a single mount point
without a drive letter.
This patch fixes building Qt in an NTFS mount point.
Task-number: QTBUG-20431
Change-Id: Ie2e15212e1a7ca7fa0067b7ca8857e243e42c21a
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@nokia.com>
- nonWritableCurrentDir() function not valid test if run as root
so added skip.
Change-Id: I772e8356e6f798f5acdf7688c55f3241ad012a43
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- nonWritableCurrentDir() function not valid test when run as root
on unix platform so add skip.
Change-Id: I0c5ee685d3bdeaf3d5d2e0bb93ba7d7796fd1028
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Moved largefile from out of qfile unittest directory to be on
same level as qfile.
Change-Id: I479b0b33594812759f8a6a7be61f8340f64234e9
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Modified unittests to use specific class headers instead of
using super-headers like QtCore that pull in all the headers for
the module.
- Decreasing build time.
Change-Id: I9c3fd0767be15205893bb406f609c8283a2a3a5a
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- All subprograms installed as part of test instead of separate installs
using installTestHelperApp() from testcase.prf
- Removed use of app_bundle for subprograms
Change-Id: I0a3de021800d36bd48479f63588b09fc7e60f32f
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The previous change missed some headers from years prior to 2011, and a
few new files were merged after the previous change.
Change-Id: Ib7d1a2b7062228c2a5373da64242b2ee1f0981e1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Changed qprocess unittest to use specific classes of QtCore instead of
pulling in all of QtCore headers by using include <QtCore>
- Decreasing build time.
Change-Id: Ifc7911548e4a9323726093ac1d35e4ce38b5f8ad
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
All QDebug operator << in custom classes were disabled by
QT_NO_DEBUG_STREAM, which was set by QT_NO_DEBUG_OUTPUT.
Now QT_NO_DEBUG_STREAM is never set automatically, but remains available
for reducing the feature set altogether (qconfig.h).
Remove check on QT_NO_TEXTSTREAM: this define is meaningless, it
doesn't even undefine QTextStream, and this is unrelated to QDebug
streaming anyway.
Change-Id: I5eeed0144fa684d0e790e9dfd9a4aeb956218c39
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use a small helper class to ensure that the files created during the
test are removed afterwards, even if the test fails. Also, verify
creation of the files in the body of the test function, not in the
helper, as verifying in the helper won't terminate the test on failure.
Change-Id: I76eff20e54ef6a1ed71d9bbb31e00f41f3d14c38
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is particularly useful for situations where the user might really want to
be notified about a failure, for instance, in a backup application.
Empty paths are not treated as an error in calling, as the user code cannot
really do anything sensible to handle this error, but empty paths should not be
used.
Change-Id: Iddb44fd39f4e3fac5c3f9f60fb7999e1833280a8
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QCOMPARE and friends should only be called in a test function. Instead
of calling QCOMPARE elsewhere, keep a count of the number of errors and
QCOMPARE that count with zero in the test function.
Change-Id: I9a264e91169a98c30980fdc04a3e45bfb0ca8063
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
There is no need to print out the name of the backend used by each test
run of a test function as every message output by the test function will
have the name of the current data row included.
Change-Id: Ie69881d2ecedce728ea67b5aae1c1196776552a5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Inotify has been available in Linux for some ~6 years now, 7 when Qt 5 will
actually be released, so I'd say it's safe to remove this fallback path now,
particularly as the autotest notes that it's broken.
Change-Id: I49dbb161d4765d63e92f512a6375323c7d37ccbe
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Several of the test functions in the QDebug autotest call
qInstallMsgHandler() to temporarily use a custom message handler.
Unfortunately, these test functions were then resetting the message
handler back to Qt's default handler at the end of the test.
QTestLib also calls qInstallMsgHandler() to set a message handler that
redirects debug/warning/fatal messages into the test log. When the test
resets the message handler back to Qt's default handler, testlib's
message handler is bypassed for the rest of the test, preventing any
subsequent debug/warning/fatal messages from being visible in the test
log or subject to testlib's ignoreMessage() function.
This error also caused several of the test functions to fail if they
were run manually. The "defaultMessagehandler" test would fail if it
was run before any other test function and the "assignment" test would
fail if it was run after any other test function.
This commit fixes these failures by using a helper class to ensure that
the previously active message handler is restored at the end of each
test function, even if the test function fails or throws an exception.
Change-Id: I51376724d164c8ad126e5b9be76890bf3e6a9fb0
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When verifying nonzero results (i.e. that something expected *did* happen),
using these macros allows bailing out of the timer much earlier than the
potential 5 seconds.
My running this on Linux goes from ~147 seconds to ~91 seconds.
Change-Id: Ie1e41252eb4eb295b5c8e795ded02f00eb7f9387
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When using QSignalSpy, always verify that the signal spy is valid. This
will cause the test to give a meaningful failure when spying on a
non-existant signal. Without this change, tests that spy on a signal to
ensure that it is not emitted (i.e. by comparing the spy count to zero)
could pass erroneously if something went wrong when creating the signal
spy, as an invalid QSignalSpy will always return a count of zero.
Change-Id: I41f4a63d9f0de9190a86de237662dc96be802446
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QTestLib-based autotests cannot perform verification steps in the test
class constructor. This needs to be done in initTestCase() instead.
Change-Id: Ib1f7f838f052fa0fc5104603bdac01ffd8313aef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTest::pixmapsAreEqual() was left in the Qt4 API for compatibility with
some old tests written for Qt3. QCOMPARE() is the preferred way to
compare QPixmaps and provides superior diagnostic output when a
comparison fails.
This commit removes QTest::pixmapsAreEqual() from the testlib API and
replaces the last few remaining calls with QCOMPARE.
Change-Id: I051c0e7d3bda072855fcd262d82e8e540619233b
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Critical bug... Good thing I had backups of my $HOME.
Change-Id: I43b3a80786c946b0aec797036c1164d436d521f8
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Updated three instances were not using QFINDTESTDATA.
Change-Id: Ibd0f6734791fc5d98ebeb65ac3bd80aa1c076414
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The test generates the runtime_resource.rcc data file at build time. Add
this to .gitignore.
Change-Id: Ief4057072b28499049147b86f166523b71afe269
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
- Check path/fileName is empty upon failure, variable was unused
- Use /home instead of /, as / is writable by admins on Mac
Change-Id: I705471fda8b73843e98b30eb52aa0a73634ec075
Reviewed-by: David Faure <faure@kde.org>
The executable needs to be in the test directory
as it expects it sub-executables from there.
Breakage introduced by 3385fb91e1
Change-Id: Ic1f3db70851f65e2f12041c3a16cb8f0b7bdf35e
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Commit a72468e820c2922540737c053eef27d033c2e77b split the test into two
functions, but kept them combined in a single slot for QTest to invoke.
That being the case, we might as well have them as test functions of
their own right. Should work nicer with test failures, skips and such.
Change-Id: I62c1fc7777c08b3e87a5903632d73dc1e1d97e1a
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
In case a subprocess fails to start.
Change-Id: I1372c07de8f3580a8e7aadd6874da15bf273ac53
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Target names with spaces must be quoted.
Change-Id: I913ef386353fc75991c8db4e3205ab511fc1f1a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
To follow the comments in the review by João Abecasis.
Change-Id: Ie566705d3b4071b8628d269246aadcde4866f34f
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
mkdtemp(10*X) replaces all 10 chars on Mac, while on linux it only
replaces the last 6. Adjusted the too-strict tests to allow for
both possibilities.
Change-Id: Ie6d57bd4947254ad7a39e75ac0e8881cebeaa428
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
As discussed on qt5-feedback / development lists.
Change-Id: If1733369d12daa29054776ec2cbd78e63679768e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The test fails if the repository is checked out with
Windows line endings. Try to work around.
Basically, ensure that common developers can conveniently
run the test.
Change-Id: I91f31b830ba7ba305deea782737d4e07a89420eb
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
On Windows (only), this test depends on some Q_AUTOTEST_EXPORT symbols.
Change-Id: I3b2ef8dcd56b8860f02fc28f45823b889e794909
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
In .pro files, removed wince/symbian-specific DEPLOYMENT cases and
replaced them with TESTDATA where appropriate.
In .cpp files, removed SRCDIR and relative paths to testdata and
replaced them with the QFINDTESTDATA macro where appropriate.
Modified test helper apps/libs to install themselves under the test
they relate to.
This change allows corelib tests to be correctly installed, along with
their testdata, via `make install'.
Change-Id: I5e202e2f3b577af7e39072d5c9fe13e0ca125304
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
