Previously QDoc HTML output was marked as XHTML 1.0 Strict, but did not pass validation.
As XHTML 1.0 Transitional the W3C validation passes.
Change-Id: Iced8c02b2602a82b94ee394e580bfb92023a517b
Reviewed-by: Martin Smith <martin.smith@nokia.com>
The default Qt template inserts </head><body> with some arguments in the header of the HTML document.
When you don't specify the HTML.endheader qdocconf variable those tags will not be generated and the
QTextBrowser-based view in Qt Assistant will not be able to render the documentation.
Change-Id: Ieee231f300e1dc71d6b6343771d2682b3de96d73
Reviewed-by: Pierre Rossi <pierre.rossi@nokia.com>
Add new qt_handleXXX functions that forward to the QWindowSystemInterface
functions, and use those in the testlib inline functions. Remove use of
struct QWindowSystemInterface::TouchPoint from the testlib header files
(requiring some slight increase in ugliness in the two tests that use
that struct).
Also remove the qmake hack that adds private headers to all tests
Change-Id: Iec23537e55a44802f6e9cd463f7a0f82007c5250
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
... which is used by some template code. apparently, the glibc on my
rather recent system removed some implicit includes again.
Change-Id: I9f85362e54a42cccc1e743f2b27bcdb6a90162e3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Most other qplatform* classes have the same setup and more
importantly this allows QPlatformWindow subclasses to utilize
the d-pointer.
Change-Id: I52afeaaf35bba8ef42d59ff3107f7d7bcf931e5e
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
We need to handle FD_CLOSE separately on Windows as this will be sent
only once. When we get FD_CLOSE we need to check if there is more data
available for reading. It there is this might indicate that there is
another FD_READ that we need to handle after the FD_CLOSE. So in this
case we will manually create another close event.
Task-number: QTBUG-19409
Task-number: QTBUG-25386
Change-Id: Ie19906bc3f64fb6a85a508a5ab12caac5d70ccdb
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
qdoc now searches for .qdoc files in the directories
listed in the exampledirs variable. These files are
added to the list of sources to be parsed.
Task nr: QTBUG-26708
Change-Id: I6dfd7cd7b41e0bdf847f88b6d61ac0272902d4e1
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
\img was a macro defined in macros.qdocconf. This collection
of macros is being phased out. Use the full command instead.
Change-Id: Ia55212f87bb46349d61359d40568e0aa33882596
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
qdoc was printing warning messages when a QML type
was not given a minor version number in its
\inqmlmodule command. The minor version number is
not used for anything, so the warning messages are
no longer printed.
Change-Id: I5586b4d860fcc8e392de3d388c3327ed0029e266
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Compiling Qt5 uic with Microsoft Visual Studio 2008
with SP1 will lead into a assertion in the copy
constructor of qstring.
This is apparently a compiler Bug.
Change-Id: Ia3353434d00b2e87800b937d891eabef86293751
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added default argument for color profile to QImage constructor
initializing QImages from pixel maps. This is to be used in future Qt
versions where color profile support will be added.
Change-Id: I815c3db4ef52f8383b48dad844b5f188aa3a3eee
Reviewed-by: Yoann Lopes <yoann.lopes@nokia.com>
This removes the bogus warnings when running
syncqt from configure about snippets in the doc/
folders.
Change-Id: I8e3d258238c1cd1e763ce63b895d58b68bbc06f3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
We explicitly do not send geometry change events to Qt from QQnxWindow
from the constructor. This prevents us from ending up in resizeEvent()
reimplementations from the QWindow ctor.
Change-Id: I045b35aa7eb23890772fe131c3d19314252f6a5a
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Kevin Ottens <kevin.ottens.qnx@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
If QWindow::create() gets called before resize() or setGeometry() then
the rect argument passed into QQnxWindow::setGeometry() by the ctor
is null.
This could potentially result in 0 sized buffers and EGL surface
creation being attempted. We bail out in this case and tell
user how to fix their application.
Change-Id: Ia709dba617fa266bd66b61409bdb1c980acfb1a2
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Kevin Ottens <kevin.ottens.qnx@kdab.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Change-Id: I52027752630beee81a97644983dbccf973c0c2c2
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Kevin Ottens <kevin.ottens.qnx@kdab.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The SCXML spec states that entry order should be equivalent to
"document order" and exit order should be "reverse document order".
Since QStateMachine uses child order for the entry order, the exit
order should be reverse child order.
Change-Id: Ia7b05fdd5c9261ccf202f64f8d23f5c88b20a8c3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Ensure that the parsing mode is cascaded down from setAuthority and
setUrl so that the hostname parsing does not attempt to decode
percent-encoded hostnames when it shouldn't.
Take the opportunity to also remove the "Boolean Trap" from
QUrlPrivate::setHost.
Change-Id: Ia64754c4a4900182700b7af1382aea8410abc7e9
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The URI RFC defines schemes as containing only a very restricted set
of characters, none of which require encoding, so don't even
try. Testing this behaviour in some web browsers indicate that they do
not accept percent-encoded schemes either.
Change-Id: I692dd20e1aac7e8a1bcb276cb5113b5802393d38
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
If the password is empty (but present), the userinfo component of the
URL should end in a colon (":"). QUrl already supported that and it
was tested (case "password-empty").
If the username is *also* empty but present, the userinfo component is
just the colon (":"). Fix support for that case by checking if we
stored the presence flag instead of checking the size of the
component.
Change-Id: Ie224493a997dbf76b2e44dd6d55fd9674ac83c1c
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QString::fromUtf8, without an explicit size, (currently) defaults to
stopping at the first NUL. That means we need to pass an explicit
size.
Also take the opportunity to test that QUrl::toPercentEncoding also
works with the same data.
Change-Id: I79362d67afda624b01ca07b0315b611c4aa3fdda
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Remove references to an old compiler that has not been
supported for a long time. Also remove Borland specific
configuration flags which have no meaning elsewhere.
Change-Id: I3634a52b78f737ea972073e14c2b6669dcd0ae63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QWindow::setWindowState is not supposed to set the window active.
The method requestActivateWindow() should be used for that.
When switching from and to fullscreen mode we're always passing
SWP_NOACTIVATE to SetWindowPos to not change the activation state
of the window. This is inverse to the old behaviour, which did not
have an effect.
Change-Id: I339337935cdad76b3ef252202e92177f37543038
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This option is important if you want to use configure's
and qmake's -sysroot (e.g. PKG_CONFIG settings, device-files),
but the toolchain (in combination with the rootfs)
is not able to handle gcc's --sysroot.
One known case is freescale's ltib setup where the toolchain
itself comes with all the essential files (e.g. crt1.o),
while the rootfs has none of those files, so gcc's
--sysroot can't be used. The rootfs on the other hand contains
all kinds of "less important" files/packages (e.g. libdbus).
For those "less important" files/packages Qt needs pkg-config
to be able to include/link properly. Therefore one needs
configures -sysroot without gcc's --sysroot.
Change-Id: Iaec9b07012f2945f3ecb3ced0ed95176721b5ecd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
So you can get AVX/NEON etc source compiled by assigning to the
corresponding variable (e.g. AVX_SOURCES).
This was previously used in just the gui module, but other
external modules might like it too.
Change-Id: I51aa64760c469c7dc4c71e6f089c2ddef4f509c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For a lot of command line tools, library loading is not required, so
don't waste a lot of time computing them. According to callgrind, this
makes the QCoreApplication constructor factor 6 faster, and also removes
a lot of stat() calls and other file system access.
Change-Id: I0211f5303712fa0dcfc4168cce7025283c63c9d1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is slightly faster, and also avoids accessing the object's meta
object that would cause any lazily created meta objects (e.g., for
QML) from being built.
This is just a port of commit a5972f8ec3
(which fixed QGuiApplication, but not QApplication).
Change-Id: I0d5080495aa4fd4486db297968c4d06bbfacf89b
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Add -widgetminimized, -widgetmaximized, -widgetfullscreen,
-windowminimized, -windowmaximized, -windowfullscreen
as command line option to test creation of windows in
these modes
Change-Id: If192c131c8996d3b67648427e5784da47ffee971
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Unloading and reloading a plugin didn't work correctly,
because we didn't reset instance to 0 on unload.
Task-number: QTBUG-26098
Change-Id: Ic3e4497f359b1ca455be949dce9cafa9d67d8039
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the setWindowState is called in a early stage,
where the window is not yet shown, the fullscreen
flag is cached in the QWindow. Then in the call to
setVisible(true) the window gets generated, but the
fullscreen is not handled there. So set the state
while window is generated.
Change-Id: I0ea53ed8a2465da6a9973d84fb4579381543e89b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
For child widgets we must use the windowHandle of the toplevel widget.
Change-Id: If7bad8ed4bba694806a2c8b77bae3d25cc200b8b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QApplication::setActiveWindow doesn't activate the native window but
marks the widget as active inside Qt.
We need to use QWidget::activateWindow instead. See docs.
Also moved the activation call further down because on Windows a
minimized window cannot be activated using the activation-by-focus
fake we're currently using.
Change-Id: I752f6ada1f463931fa9cfb3c35f42dbec0207bfa
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Previously synchronous window system events were
implemented by bypassing the queue and processing
the event immediately. This is not ideal since the
event order is not preserved - there might be "happened
before" events waiting in the queue.
Add QWindowSystemInterface::flushWindowSystemEvents
and change all handleSynchronous* to 1) queue the
event 2) call flushWindowSystemEvents.
flushWindowSystemEvents is almost identical to the
already existing sendWindowSystemEvents with the
exception that it does not call QApp::sendPostedEvents.
Move the common implementation to a new private function.
Task-number: QTBUG-20778
Change-Id: Ie98a83875bc0a14e335e36bed0dd9e0ed4a1dea0
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
That can happen when e.g. running an application with sudo.
Task-number: QTBUG-26547
Change-Id: Ib16ef7798ebcd1c9b8d661dd2e3ce3aadc393489
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
The test has a member QWidget *topLevel which it recreates
and shows in init() without waiting for it to be exposed
although it is not used in every test case. This apparently
interferes with some tests that create separate top levels.
Do not show in init(), delete the topLevel.
Add wait to the cases where the topLevel is shown.
Change-Id: Ib428020b36dc82991d41e68478fd583bdfb004c7
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
The accessible table/list implementation would ignore
when a root index is set, resulting in trying to use row/column
for the top level index, leading to accessing invalid indexes.
(cherry picked from commit def2ee829435c705055733a0f99c0ca44a012c50)
Conflicts:
src/plugins/accessible/widgets/itemviews.cpp
Change-Id: Ic2745ab3e262ccee2d43e0d532e165d2958f519e
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
CONFIG does not contain build_all anymore,
thus we need to check QT_CONFIG in bootstrap.pr{i,o}.
Change-Id: Ia505fa101adc49f185908ca575d3211caed612db
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
