Now the tst_qstring is compiled three times:
- with QT_NO_CAST_FROM_ASCII defined
- with QT_RESTRICTED_CAST_FROM_ASCII defined
- with neither of the above defined
so as to cover more code paths.
Pick-to: 6.5
Task-number: QTBUG-109228
Change-Id: I65eca0f6f6aea66fed6eeda1eb77a50a97210807
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This follows up on commit b906796af6.
Fix an off-by-one error - I was testing the last days of December 1799
and June 1800.
Change-Id: I79ab622978d35f91e3e1b1b8d00d93b0d4b31c07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use static constexpr int values instead of abusing enum.
[ChangeLog][QtCore][QTimeZone] The MinUtcOffsetSecs and
MaxUtcOffsetSecs constants are now static constexpr members of
QTimeZone, rather than members of an anonymous enum. Their values are
now 16 hours either side of zero, to allow for some historical zones.
Change-Id: I1c3a0f85a2b83b5010f021ca0f5ca5baefbf32e4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
In Qt >= 6.1, < 6.5, a trivially constructible type would have the
NeedsDestruction flag set, but it's dtor pointer would have been null.
In Qt 6.5, the meaning of the NeedsDestruction flag was changed to be
more aligned with what the name suggests, and thus would only be set for
non-trivially destructible types. For QMetaType this was fine, but
QVariant has a check for acceptable metatypes which attempts to verify
whether a QMetaType is usable for QVariant. The check assumes the
semantics of Qt 6.5, and thus fails for metatypes created by older Qt
versions.
To fix this issue, we increment the QMetaType revision field, and only
check the metatype's destruction support if the revision is high enough.
In theory, that allows passing unsuitable metatypes from older Qt
versions to QVariant; however, such code would have been broken in prior
Qt releases already (which didn't attempt the check), and no code that
used to work in any released Qt version will break (as we simply skip a
check that was passing before).
Fixes: QTBUG-113227
Pick-to: 6.5
Change-Id: I12e02bd97d2c410ea1a36efb0ce2389f21d50a30
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Amends 207aae5560 to make it easy to
create human-friendly error messages. Since the functor-accepting member
functions are not removed from the API, the first compile error will be
that there is no suitable overload of the makeSlotObject helper, which.
With the assert helper, the first error message is easier to understand.
Change-Id: I4878ec35a44ddfa5dc9d9e358d81c3fd40389c0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move-only functors must never be passed by value, so fix the
QFunctorSlotObject constructor accordingly.
This then requires adjustments to the various QMetaMethod::invokeMethod
overloads, as those must also perfectly forwad the functor type.
Enable the previously failing test case for move-only functors.
Change-Id: I9c544fd3ddbc5e1da3ca193236291a9f83d86211
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amend 207aae5560, as code checker
complained that we std::move'd a potential lvalue. This warning was
valid if the public API did not accept the functor parameter by value.
Fix this by consistently std::forward'ing the parameters through the
call stack, and add a compile-time test. Writing that test revealed that
the helper API didn't work with free functions, so fix that as well. It
also revealed that QFunctorSlotObject couldn't work with a const
functor, which is also fixed by this change.
We cannot support move-only functors with that change, as it requires
a change to QFunctorSlotObject that breaks the QMetaObject test.
Change-Id: Iafd747baf4cb0213ecedb391ed46b4595388182b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Exercise the validity of update batches, i.e. that one can
safely commit it in later frames as well, as long as all
related buffers and textures stay valid.
Change-Id: Ia943e4b37141fe17253eeae32010e0f8d92c1583
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
This avoids constructing an object just to copy (later: move) it into a
QVariant.
ChangeLog will be in a follow-up change adding emplace support.
Task-number: QTBUG-112187
Change-Id: I444e580c7d8927d41b3d21d5a521e7c475119e4c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Functions in Qt that take a callback need to support callables with or
without context objects, and member functions of an object. The
implementation of those overloads follows a pattern that ultimately
results in a QSlotObjectBase implementation being created and
passed to an implementation helper that takes care of the logic.
Factor that common pattern into a new helper template in QtPrivate
that returns a suitable QSlotObjectBase after checking that the
functor is compatible with the specified argument types.
Use that new helper template in the implementation of
QCoreApplication::requestPermission and QHostInfo::lookupHost.
The only disadvantage of centralizing this logic is that we cannot print
a more detailed error message indicating which argument types the
caller expects. However, that information is visible from the detailed
compiler errors anyway.
Change-Id: I24cf0b2442217857b96ffc4d2d6c997c4fae34e0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Add the move ctor and move operator for QSqlField
Task-number: QTBUG-109938
Change-Id: Ib66eff76c3a920de9cfb3288f4219555005e7ae5
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
QTabBar lays out the tabs when the bar's size or content changes,
often lazily. This should not change the scroll offset of the tabbar,
which is controlled by the user, or at most when a tab needs to be made
visible (e.g. when it becomes the current tab).
Move the logic of updating the scoll offset into the makeVisible
function, so that the scroll is only adjusted to either leave no gap
between the last tab and the right edge of the widget of there is still
a scroll; or to reset it to 0 if there is enough space for the entire
tab bar. Since layoutTabs does show and hide the scroll buttons, we
cannot skip this when the buttons are invisible. However, the
normalizedScrollRect helper now needs to return the entire widget rect
if there are no visible scroll buttons.
Add a test case that simulates the previously broken behavior where
the scroll got unnecessarily reset to 0 when resizing.
Fixes: QTBUG-113140
Pick-to: 6.5
Change-Id: Ic19fbb82821ea09cc5e7646dcbce3aa7607909c2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
These classes depend only on Core, not Gui.
This allows dropping the dependency of tst_qxmlstream and tst_qzip on
QtGui, and prevents a tst_qxmlstream FTBFS when building with
QT_NO_TEXTODFWRITER.
Symbols move from QtGui to QtCore, but the classes are private API, so
not under BC constraints.
The classes are not used outside qtbase, so no other in-tree users
need porting.
Task-number: QTBUG-3897
Change-Id: Ifa148f43ec139d7f9ac1f3893e2fcf4640e3c60c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The expected states are:
- nothing sets theMainThread before main()
- theMainThread is reset when the last QObject (the QCoreApplication in
the test) is destroyed
The GUI version of this test appears to leak a lot of QObjects. By the
time this function runs, theMainThread's QThreadData still has a
refcount of 66 on Linux/XCB. The Windows non-GUI version also
failed. Neither situation was investigated to see why objects are
getting leaked.
Pick-to: 6.5
Change-Id: Idd5e1bb52be047d7b4fffffd17507d9e6ef08743
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Instead of having one member signaling !openssl
let's just add booleans for openssl, schannel and securetransport.
The latter two of which are not currently used but may be in the future.
As a drive-by, make a compile-time check into a runtime one.
Change-Id: Id2f51f5396383a3f5836ac708996bfce8ae35c91
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QtXml is only DOM and SAX, not QXmlStreamReader/Writer (those are in
QtCore).
Pick-to: 6.5 6.2
Change-Id: I8454d7db90303d347d5b4be94c9f21401d1e273f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
b1802a164b added handling for a parent to
become focus proxy of a child. The respective 'else if' branch didn't
check whether setFocusProxy() was called with a nullptr argument.
This patch adds the missing nullptr check.
It also adds functionality to tst_QWidget::tabOrderComboBox() to test
the removal of a focus proxy, as well as the complete removal of an
element from the focus chain.
Change-Id: I4cb865b9ac4497fc5e2595910738fb77694f5837
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- Definition of 'standalone' attribute:
An XML declaration containing the attribute 'standalone' with its
value set to 'yes', tells the parser to ignore markup declarations
in the DTD and to use them only for validation.
The declaration attribute is optional and defaults to 'no'.
- Behavior Qt5
In qt5, DOM documents contained the standalone attribute,
regardless of whether or not it was explicitly specified.
- Behavior Qt6
In Qt6, the standalone attribute was only contained in a DOM document,
if its value was 'yes'. If it was explicitly declared with the value
being 'no', it was dropped in the DOM document.
- Expected behavior
If the source specified it overtly, then the generated XML should
contain the attribute, even when it takes its default value.
- Code base
QXmlStreamReader provides a public bool getter isStandaloneDocument().
This says whether the document is standalone or not.
The information whether the attribute was actually specified gets lost.
In consequence, the attribute was always dropped on non-standalone
documents.
- Fix
This patch makes hasStandalone a member of QXmlStreamReaderPrivate, to
record whether the attribute has been explicitly specified.
QDomParser is modified to retain the standalone attribute, if
QXmlStreamReaderPrivate::hasStandalone is true.
- Test
The patch adds a test function in tst_QDom.
Fixes: QTBUG-111200
Pick-to: 6.5 6.2
Change-Id: I06a0f230a2d69597dd6453f8fd3b036943d08735
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The macro sets the required CMake variables and policies and
should be called right after the
find_package(Qt6 COMPONENTS BuildInternals... call to make sure that
the subsequent code adopt all the required policies.
Pick-to: 6.5
Task-number: QTBUG-112685
Change-Id: I9f93f728ee4d8ae7743db9fffafa26025c76dcf2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In commit 482a75fef9 the code was changed to return early, but that
missed appending the organization and app names while test mode is
enabled.
Issue spotted by Edward.
Pick-to: 6.5
Change-Id: Ifd220f8990874a173413dcf71d105c04b605c800
Reviewed-by: David Faure <david.faure@kdab.com>
Some unittests set a custom Organization and Application names and then
clears them. Instead used init() method to "reset" those two names to
the original values before each unittest is run.
Pick-to: 6.5
Change-Id: I359f3911dd50a2aecfd8dde22e2d591adc6e224e
Reviewed-by: David Faure <david.faure@kdab.com>
When a parent became a new child's focus proxy in an existing focus
chain, the child was appended at the end of the chain.
That leads to broken tab order, e.g. with a QComboBox which became
editable after a focus chain has been set.
This patch captures the case and insertes the new child after its
parent in the focus chain.
A corresponding test function is added in tst_QWidget.
Fixes: QTBUG-111978
Pick-to: 6.5
Change-Id: I3a426c0560fa830b7b7ffead54f26dd0adef499f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Amend 4d90c4e74a by clarifying why
moving the QSingleShotObject to the receiver's thread is a good
idea. Move that logic into a separate function and use that also
for the string-based connection.
Optimize the implementation by delaying the timer creation until
after we have moved the QSingleShotTimer object to the target
thread, using a queued metacall if needed to create the timer.
This avoids the creation of the timer in the wrong thread and
then the recreation of the timer in the new thread when QObject
handles QEvent::ThreadChange.
To avoid that the timer is created when it has already expired in
real time, use a deadline timer and fire timeout immediately when
it has expired by the time we get the metacall.
Since the timerId might now not be initialized in the constructor,
initialize it to -1.
Augment the crossThreadSingleShotToFunctor test function by
deliberately not starting the thread until the deadline expired.
[ChangeLog][Core][QTimer] Single-shot timers with a string-based
connection are now started in the receiver's thread, not in the
thread that creates the timer.
Task-number: QTBUG-112162
Change-Id: I3fc94c34c21d9f644da41a2e4c2da479980b8580
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's quite flaky, and since we currently don't have FTP support
there's no point in making sure it works
Pick-to: 6.5 6.2
Change-Id: Ice01e8d36f2b7830813119da3513cc01ec005c46
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
MET is an alias for CET, so the test's attempts to detect whether it's
in CET can't distinguish them other than by checking the abbreviation.
Change-Id: Ibb467d9bb2d983ca16302111b54f664a614057c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It turns out that Alaska and The Philippines had historical offsets
exceeding 15 hours, prior to day-transitions to bring their dates in
sync with their respective sides of the international date line.
Change-Id: I48fdf3aa6d8c0bacb368d08316733a10ee11a281
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The recorded images frequently show traces of a fading-out command
prompt window that is opened by the test execution. We evidently have
to wait longer for all window-level effects are finished.
Pick-to: 6.5
Change-Id: I50db54ff33bf4bb1ef7c480a4aede1d5de1618c3
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
...so we have core profile compatible GLSL code
in them. Just so one can run e.g. triquadcube with
-g -c (OpenGL with a core profile context).
Pick-to: 6.5
Change-Id: I585d3b4f0c7cd71ce7fae1fff4bf9a84cb7410da
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
qtbase/c27d2a57a441f9a1ce760e71635bd4c96882249d caused the code
to go through QStandardItemPrivate::setItemData() which does
not handle the special treatment of Qt::EditRole completely.
In the constructor of QStandardItemData; map Qt::EditRole to
Qt::DisplayRole to fix this as is done in setData().
Adapt the existing tst_QStandardItemModel::getSetItemData() to check
whether both roles are received in the dataChanged() signal.
Pick-to: 6.5
Fixes: QTBUG-112326
Change-Id: I133d058bacc3388c612c5b4fb18b54f5ef5cb56f
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: David Faure <david.faure@kdab.com>
Removing a few unused variables in auto tests that were triggering
`-Wunused-but-set-variable`.
Pick-to: 6.5
Change-Id: I74bd0d7335d8bddeb18687b18c8a8be965f9fa20
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This removes all uses of QDeadlineTimer::t2 member in the .cpp (so it
gets marked [[maybe_unused]]) and greatly simplifies the code.
Change-Id: Ieec322d73c1e40ad95c8fffd17465bd50c1113ea
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
You can't partially specialize a template function, so these
specializations for steady_clock only worked if the Duration parameter
was nanoseconds. This could have been solved with function overloads
instead, but I find the if constexpr code simpler to read.
Pick-to: 6.5
Change-Id: Ieec322d73c1e40ad95c8fffd17468bd73fc2fe24
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This matches the work that was done for QElapsedTimer. The
QDeadlineTimer::t2 member is now always 0.
This also removes the last distinction of timer types. Originally I had
intended to use CLOCK_MONOTONIC_COARSE on Linux[1], but that created
more problems than was worth, so I abandoned the idea in 2016.
[1] https://codereview.qt-project.org/c/qt/qtbase/+/159933
Change-Id: Ieec322d73c1e40ad95c8fffd17468b313798ef79
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
This commit deletes the direct, low-level functionality that
QElapsedTimer has carried since it was introduced. Everything now uses
only std::chrono::steady_clock and std::chrono::nanoseconds.
QDeadlineTimer temporarily still uses qt_gettime(), which is moved to
qcore_unix.cpp.
Task-number: QTBUG-110059
Change-Id: Ieec322d73c1e40ad95c8fffd174641a469b1eee5
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Modeled after Metal's cb.GPUStart/EndTime. Implemented with timestamp
queries for other APIs.
Implemented for Metal, D3D11, Vulkan for now. No more callback, just
a getter on the command buffer which returns the latest known value,
referring to some previous frame. This makes it a lot more usable
than the original solution that is not really used anywhere at
the moment.
Now works for offscreen "frames" as well, this was not implemented
before.
Opt in with a new QRhi::create() flag because we cannot tell in
advance if the getter will be called or not, and this way we can
skip recording the timestamps by default. The cost is probably
minimal, though. Qt Quick will set this automatically when running
with QSG_RHI_PROFILE=1.
Change-Id: I903779984a4e0bbf1d03806d04bf61571ce23d72
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
...even when the QRhi is already gone. This should not happen in
well-written applications and libraries, but we handle this
gracefully in the regular dtor and destroy() for resources that
register themselves to their creator QRhi, so by registering
everything we can offer this to all QRhiResource subclasses.
We still want to differentiate between native resource owning
QRhiResources and others (that do not create native graphics
objects), so do this via a flag passed to registerResource().
This way the behavior with QT_RHI_LEAK_CHECK=1 does not change.
Pick-to: 6.5
Fixes: QTBUG-112914
Change-Id: I9bafc81ef7a4ae76f356fc5f6248628d1f8791e0
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Avoid capturing the same property multiple times in a binding by
storing them in the BindingEvaluationState. We store them in a
QVarLengthArray array, as the number of properties involved in a binding
is expected to be rather low, so a linear scan is fine.
Avoiding double capture is a good idea in general, as we would otherwise
needlessly reevaluate bindings multiple times, and also needlessly
allocate memory for further observers, instead of using a binding's
inline observer array.
Even more importantantly, our notification code makes assumptions that
notify will visit bindings only exactly once. Not upholding that
invariant leads to memory corruption and subsequent crashes, as
observers allocated by the binding would get freed, even though we would
still access them later.
Fixes: QTBUG-112822
Pick-to: 6.5 6.2
Change-Id: Icdc1f43fe554df6fa69e881872b2c429d5fa0bbc
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Task-number: QTBUG-109779
Pick-to: 6.5
Change-Id: I21ecd4910ba3d699e44d9ea922093e98e0b8a335
Reviewed-by: Inho Lee <inho.lee@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Fixes compiler warnings about narrowing conversions.
Found by compiling with clang and -Wshorten-64-to-32.
Drive-by changes:
- use range-for instead of an iterator based loop
- use strlen("*.") instead of magic number 2
Pick-to: 6.5
Task-number: QTBUG-102461
Change-Id: I0bf2299049c0411ed496468238ca30b69946ffc2
Reviewed-by: David Faure <david.faure@kdab.com>
Similar to TableScope - create a helper class to make sure the
procedures are cleaned up on exit so they don't affect the result during
the next test run.
Change-Id: Ic5b02ca63e03f330392797ed22313767557fc548
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Equivalent to the test added to the QWidget test case, but since QtWidgets
code contains logic to both synthesize and compress/filter enter/leave
events, we can only verify that the QWindow does get the events.
The test is very flaky on Windows, so blacklisting it right away.
Change-Id: Ic1da9439f60f619a76a3653a23fef8e9ebc0e75d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The classification of local time as ahead of UTC, behind it or equal
to it gets complicated by zones near the prime meridian - some of
which have varied which side of it they nominally are - or the
international date line, which a few zones have crossed.
So, instead of having one classifying variable, split to having three,
one for the distant past (when using local solar mean time), one for
the epoch and one for the distant future.
Change-Id: I7c0da376e1625372086dc51afa815756f0bde442
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes it possible, on a system with /usr/{lib,share}/zoneinfo/,
to systematically run a command with TZ set to each system-supported
zone. For example, it can be used to verify that a corelib/time/ test
passes regardless of the valid setting of TZ.
Change-Id: I6ea9a64d8bcb745aea80ab9ae431602d3e3265a1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The stepIntoDSTGap() hour cases were already conditioned on hour > 0,
explain why. The month and year tests need similar checks for kindred
reasons; add and document those checks.
Pick-to: 6.5
Change-Id: Ibcb69449fcd572ee94306a805fd680e9b5155322
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The zone had a transition at the start of 1900, so QDTP's default date
ends up being 1900-01-01 at 00:02:20 instead of at 00:00:00; and any
parsing of date-time strings that doesn't set the minutes and seconds
consequently ends up "wrong" (about a field that wasn't specified).
Change-Id: If4b9864616fa08bc023a6974dae255f96ca90f83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The zone had a transition at the start of 1900, used as default date
by the parser. This leads to the default minutes and seconds being 2
and 20, rather than 0. Since this test is parsing a date-only string,
only check the date of the result, to avoid failing in Cocos.
Pick-to: 6.5
Change-Id: Ifb307eadb747097988bcf0afc6f307835ff2c8ec
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
America/Sao_Paulo was not alone in starting 2008-10-19 with a spring
forward. Include the other affected zones in the check to tune the
expected start-of-day time. See [0] for details.
[0] https://github.com/eggert/tz/blob/main/southamerica
Pick-to: 6.5
Change-Id: If251d8b715090319441790696983273637765d2e
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some QDateTime tests get tripped up by a transition at the epoch in
Baja Mexico. For the operator_eq() and time-difference test, simply
using startOfDay() instead of QTime(0, 0) - which was skipped - solves
the problem. For addDays() and fromStringDateFormat(), skip the
affected tests.
Change-Id: I3620f0d1e4b05d9f799662eea96a40c8284de331
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The zones in Baja Mexico had a transition at the epoch.
Change-Id: Ic70e23bcc980bf371e925fcb8fb83ca5ef000c9f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Given that QDTE only supports local time and UTC, using Europe/Oslo as
zone was disconnected from reality, especially as various QDateTime()s
were constructed using local time. Use the system zone.
Pick-to: 6.5 6.2
Change-Id: I95b3a6a6acf9ffc2b8c7f05d3dd9440ff173abfe
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test wants to start shortly after the transition, then step an
hour backwards, into it, to check we land safely on the other side.
However, it assumed the gap witdh was an hour, which is not reliable.
Use the gapWidth already used in computing springGap instead.
The -3590 seconds in the result time is correct, as it's the ten extra
seconds we started beyond the gap, minus the hour we step backwards.
Pick-to: 6.5
Change-Id: I4399af7e54a60bd55ea51d054d3cd2ecfcb0e354
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The "{forward,back} to %s, correct to nearest" tests were reporting
the time of the transition as %s but, like the jump test, were using
the middle of the gap as the time to set. So compute that mid-time's
string once and use it in all three test names. Also renamed some
local variables to accommodate the new one for this text.
Pick-to: 6.5
Change-Id: Ic6c40c470fc74ae8bcfc0dc9d1596af06318a883
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Although the zone's daylight time offset is usually the width of the
gap, it's possible the transition is (or includes) a change to
standard time; so determine the actual gap width by comparing the
difference between time a day earlier and later to the usual duration
of two days. Also skip the test if the transition isn't really a gap.
Pick-to: 6.5
Change-Id: I56e381c9f74cfa1806d43b3ed5e4637436ebdf57
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The function is passed a zone to work in, so setting the transition to
local time made no sense; set to the given zone's time, instead.
Pick-to: 6.5
Change-Id: Icaa0955fe5fcd5bc257322afcb7e25e932dedd1b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
We check three sample dates, in different years, so don't compare
their year() to 1970, but to their respective actual years. In the
process, package the arrays iterated for these checks into a constexpr
struct array and reverse them so that, instead of reverse-iterating
and indexing, we can use a ranged-for loop.
Change-Id: I214685346c637875a4ea31125c324851eb4308db
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The name final is suboptimal, given that it's also a keyword.
Rename initial at the same time.
The local-time parts of the test are apt to fail if local time
coincides with the zone being tested, as previously noted. Document
known cases of such coincidences, to help someone studying a failure
to know why it happened.
Change-Id: I1f1f302f161373a154066df210e03725b9a5f9ed
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the test failed, it did so in triplicate.
Pick-to: 6.5
Change-Id: Ia871aed0a5960120a2659a6778c10dccd4b2953a
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In case FEATURE_timezone=OFF auto-tests should still be built successfully
Change-Id: I0226a7d7781a412bf9e9935c2cf1a48b1ce427b5
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Noticed the warnings when building the manual tests.
Pick-to: 6.5
Change-Id: I7f927f42f11d234ec3c980f36d8e12c0c49be712
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It's unlikely we will ever use pro2cmake at this project stage,
so it doesn't make any sense to keep the 'special case' markers
in the CMake scripts. Remove them and replace with TODO where
needed.
Change-Id: I84290c20679dabbfdec3c5937ce0428fecb3e5a7
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We sometimes use Objective-C++ code in files with a .cpp extension,
to avoid the churn of adding a foo_mac.mm file. Instead of manually
telling the compiler to build these files in Objective-C++ mode, we
use CMake's intended mechanism, which means genex constructs such as
$<$<COMPILE_LANGUAGE:OBJCXX> will work for these files as well.
Pick-to: 6.5 6.2
Change-Id: If295c3f34f6bee9f4d9f877f519c9c7770665fee
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When the DPI of a window changes due to being moved to another screen,
or the current screen reconfiguring, the mask we've set earlier is no
longer correct, as the mask was set based on the original screen's
scale factor and in relation to the former platform geometry of the
window, which now has changed.
Like the geometry of a QWindow, the mask is expressed by the user in
the QtGui coordinate system, so it's the platform's job to transform
this into the platform coordinate system and update it when needed.
Add a manual test that users a QWidget and a Q(Raster)Window side by
side.
There's still an issue with the screen change being triggered to
early, via QWindow::setGeometry, instead of when the window has
actually moved to the new screen, resulting in the paint event
flushing to a window and backingstore that is in the wrong state,
but this requires further research to fix.
Task-number: QTBUG-97642
Pick-to: 6.5 6.2
Done-with: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I7ab2d267fbaf6ac32b507d05a418eb025b354a0b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
And implement the rvalue overload of addResult() using it.
[ChangeLog][QtCore][QPromise] Added emplaceResult() and
emplaceResultAt() member functions.
Fixes: QTBUG-112270
Change-Id: Id369542215a60c0818f1afa8d564498be84732e8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test implicitly relies on window activation as QWidget only emits
accessibility events for focus changes in the active window. So skip it
on platforms that don't support WindowActivation and remove it from
the blacklist.
Fixes: QTBUG-109763
Pick-to: 6.5
Change-Id: I67d9a95f4f36b5271fe53ae90140a28770566c83
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QMenu::exec opens a blocking loop, which is problematic for webassembly.
Replace with QMenu::popup, and reset the down-state of the button when
the menu is about to hide. QMenu emits aboutToHide immediately before
existing the event loop in the hideEvent override, so the timing is the
same.
Change-Id: Iccb418d10fcb25f6ad1f73f9cdce6ea6581bd73b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The "two widgets at a time" API to set the tab order is awkward and
easily misused (as the documentation explicitly explains). Add an inline
overload that takes an initializer_list, and call the existing function
for each consecutive pair of widgets in the list.
Add documentation with snippet, and a test.
Change-Id: I8e6f14a242866e3ee7cfb8ecade4697d6bdfb4d4
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QDateTime::addMsecs does check for overflow. I don't know when this
has changed, but it doesn't matter.
Change-Id: I44c6ba5e88cce544c0d1ef33fa38a528a96b0b7e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only unzip the test suite in initTestCase(), but run the tests from
runTestSuite(). This is mainly useful when running specific a unittest
locally, no need to wait for the whole zipped test suite to run.
Change-Id: I518a2de716d3d07fb5a78298f1bd3ab2759e744b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use TableScope helper class to make sure the table used for the test is
really cleaned up before usage.
Change-Id: I45fffcd13acae6032636ae07097b14af174ede21
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Sync the IBASE driver behavior for primaryIndex() and record() with the
rest by assuming that the given table name has the correct casing.
Change the tests for these two function to pass an unescaped table name.
Change-Id: I6d96359f97e1acc6970b9a22fdf0e968a616b7bc
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
[ChangeLog][SQL][SqlQuery] Added two new functions
boundValueName()/boundValueNames() to return the names of the bound
values.
Fixes: QTBUG-97847
Change-Id: I8df5f15e8df13141a34d38b0a2e13b37f4e7829c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We can expand the testing a bit bit verifying that also
created windows work as expected, and that QWindow DPR
is updated when Screen DPI is changed.
Change-Id: I082aac18b6b086c69c16681977b7eaa6c3e54ee0
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
The alias created by QSqlRelationTableModel to avoid duplicated field
names was not escaped which lead to an inconsistency in the returned
alias name from the database (e.g. postgres lowers all unescaped column
names).
Also adjust the test for QSqlRelationTableModel to use escaped table
names for it's tests and fix it for QIBASE.
Change-Id: I01426320c0c1a70cb9bf8e6dfa2f8b07dbb1c06b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When a context object is provided, then callers expect that the functor
or slot is executed in the thread of the context object. And if the
context object has been destroyed by the time the permission response
is received, the functor shouldn't be called at all.
To implement this, we either have to plumb the call back through a
signal/slot connection and benefit from QObject's infrastructure. This
is not practical here, as we don't have an "engine QObject" that would
emit a signal.
Instead, we can create a QMetaCallEvent explicitly, following what we do
in e.g. QHostInfo, and using a temporary QObject that handles the event
to then call the functor.
Add test coverage.
Pick-to: 6.5
Change-Id: Id878e45b304857304165ab4a7c6aae76fbee46ce
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
[ChangeLog][Deprecation Notice][QtCore] The QtFuture::makeReadyFuture()
method and all its specializations are deprecated since Qt 6.10.
The reason for the deprecation is that the method has a
makeReadyFuture(const QList<T> &) overload, which behaves differently
from all other overloads (including other non-const ref QList
overloads).
Use QtFuture::makeReadyVoidFuture() when you need a ready void QFuture,
or QtFuture::makeReadyValueFuture() when you need to propagate the
input type to the returned QFuture, or QtFuture::makeReadyRangeFuture()
when you need to create a multi-value future based on an input
container.
Fixes: QTBUG-109677
Change-Id: I55125269989df0a02840d5ddd5763ef5f1070df5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
[ChangeLog][QtCore][QFuture] Added QtFuture::makeReadyVoidFuture()
and QtFuture::makeReadyValueFuture().
Basically, these methods behave like QtFuture::makeReadyFuture(), but
QtFuture::makeReadyValueFuture() does not have a "const QList<T> &"
specialization returning QFuture<T> instead of QFuture<QList<T>>,
which allows it to always behave consistently.
This patch also introduces usage of the new methods around qtbase.
Task-number: QTBUG-109677
Change-Id: I89df8b26d82c192baad69efb5df517a8b182995f
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
[ChangeLog][QtCore][QFuture] Introduce
QtFuture::makeReadyRangeFuture(). This method takes a container
which has input iterators and returns a multi-value
QFuture<ValueType>, where ValueType is the underlying type of
the input container.
This commit also replaces the usage of buggy
QtFuture::makeReadyFuture(const QList<T> &) overload with the new
method.
Task-number: QTBUG-109677
Change-Id: I019e62eac74c643d88a65b3cc0085bc7c33bc712
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This can happen if the same project has two or more Q_IMPORT_PLUGIN
macros in their source. And that can happen when converting from qmake-
based builds to CMake, as qmake didn't generate a source file with the
macro but CMake does.
[ChangeLog][QtCore][QPluginLoader] staticInstances() will not call
duplicated registrations of the same instantiation function, which can
only happen as a result of duplicated Q_IMPORT_PLUGIN for the same
plugin name.
Fixes: QTBUG-102745
Pick-to: 6.2 6.5
Change-Id: Idd5e1bb52be047d7b4fffffd174fb9dd62d8583d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The benchmarks were only copied from the tests without a proper cleanup
- therefore clean them up now.
Change-Id: I0285de3fd2b67c21e732d7f3f9d1f4937965be81
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QMultiHash has access to two sizes: one of them is shared with QHash,
stored in QHashPrivate::Data::size, which counts keys; the other, which
is what our public size() function returns, is stored in
QMultiHash::m_size and counts plain (key,value) entries. We forgot to
update it in the non-const operator[] that created a node.
I've reviewed the rest of the code and can't find any more places where
the item count may be changed and m_size isn't updated.
[ChangeLog][QtCore][QMultiHash] Fixed a bug that caused an element that
was created by operator[] to not be counted, resulting in a hash map
with an incorrect element count and which could cause an assertion
failure depending on how the hash was later mutated.
Fixes: QTBUG-112534
Pick-to: 6.2 6.4 6.5
Change-Id: Idd5e1bb52be047d7b4fffffd17527ec274e1d99e
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
