When trying to build qt3d examples with qmake and MinGW in the CI,
compilation would fail with errors like
In file included from
C:/MINGW1120/mingw64/x86_64-w64-mingw32/include/windows.h:72,
from C:\Users\qt\work\qt\qt3d\examples\qt3d\simple-cpp\main.cpp:63
include/winuser.h:2965:72: error: 'POINTER_INPUT_TYPE' was not
declared in this scope
What happens is that calling qmake on examples.pro loads
qt3d/.qmake.conf, which then loads qt_build_config.prf which then
defines the following definitions:
mingw: DEFINES += WINVER=0x0601 _WIN32_WINNT=0x0601
This limits usage of Windows API up to Windows 7, with later APIs
being unavailable.
Most .qmake.conf files were removed in qt repos, but We didn't remove
the .qmake.conf file (fb656c036d) for
qt3d because it's supposed to be buildable with CMake + Qt 6 as
well as qmake + Qt 5.
Bump the defines to the same Windows 10 version we use everywhere else
when building with CMake.
Amends 6652bf2353
Relates to d57a7c4171
Relates to fb656c036d
Pick-to: 6.2 6.3
Task-number: COIN-762
Task-number: QTBUG-92271
Change-Id: I833dfb6b0832d90a76d05ea14cd3807cb0d67ca9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Emscripten now warns against passing e.g. “ALLOW_MEMORY_GROWTH”
as a compile option.
Add EMCC_THREAD_CFLAGS, which gets compiler flags only.
Pick-to: 6.3
Change-Id: Ifcf40c45ca75cfdfc98a12e6b9d47f34158b3407
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Use “-pthreads” instead of “-s USE_PTHREADS=1”. This
is both a compile and linker option.
Pick-to: 6.3
Change-Id: Iaf7cb4ec41577fe596c3e81fda05c03fe0074c08
Reviewed-by: David Skoland <david.skoland@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
If Xcode wasn't configured with any simulators the build would fail
since we had no device to build for. But we don't need to build for
a specific device, we can build for the generic simulator device,
just like we do for the non-simulator build. This likely didn't
work properly at the time it was first implemented, but now seems
to work fine, and is less fragile than the current solution.
Running tests still enumerates the available simulators,
as that needs a concrete device to run on.
Fixes: COIN-777
Pick-to: 6.2 6.3 5.15
Change-Id: I50e31c1b350cf83ce348275b467051263dea88a9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
-g4 was deprecated in Emscripten 2.0.17, and since we are well past
that version we can safely use -gsource-map instead.
Change-Id: I497155619d6320661f6be0e220b52fa7d6ca0b8e
Reviewed-by: David Skoland <david.skoland@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
[ChangeLog][wasm] Recommended emscripten version is now 3.0.0
Change-Id: I9ae082509415d8f00b8e9970b730ad4a472da310
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
When building a shared library (with qmake) in a user project
targeting Android, the library gets a QT_ARCH suffix added to its
name.
This suffix is not added when building a static library
(CONFIG += staticlib).
In the context of a multi-abi android qmake build, all the arch
specific static libraries would have the same name and would
override each other.
This happens with Qt 5.15 and it would also happen in Qt 6,
but we don't support multi-abi qmake builds in Qt 6 so far.
When the original fix to include the arch suffix for shared libraries
was done in Qt 5, d463a63bb9
it was likely an oversight that it was not applied to static
libraries as well.
The !static part of the condition was added in
72d4f0750b .
The change only handled installation responsibilities, not naming of
libraries.
Fix static libraries to include the arch suffix, but only in Qt 6.
It's too late to fix it in Qt 5, there might be projects that rely on
there not being a suffix in static library names. Adding the suffix
would suddenly cause linking errors.
Amends d463a63bb9
[ChangeLog][Android][qmake] Static libraries targeting Android will
now include an arch suffix when built using qmake.
Fixes: QTBUG-83165
Change-Id: I6f68dcb74cec30b4c8f0bc5a819d89843e9d695e
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Doc build is using the same variable to define the reponse file
as moc build, which can lead to case where moc is using the qdoc's
response file instead of its own. Moc needs more include paths than
qdoc, this can then lead to weird compilation issues as moc doesn't
warn about missing includes.
Task-number: QTBUG-98569
Pick-to: 6.2 5.15
Change-Id: Id35da18f664e2032bae96d11b00dbfe55ce37f66
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Large address aware is enabled by default in 64-bit
compilers, but not 32-bit compilers. But Qt users
may build 32-bit Qt themself, in this case large
address aware is disabled in fact, and it may cause
some issues. So we pass /LARGEADDRESSAWARE to the
linker unconditionally to make sure large address
aware is enabled for both 32-bit and 64-bit builds.
Microsoft Docs:
https://docs.microsoft.com/en-us/cpp/build/reference/largeaddressaware-handle-large-addresses?view=msvc-170
Change-Id: Idb2603d9ba0ba9ef4477ce1c3174b7c7e8ba76f6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
To allow using Android 12 APIs.
Pick-to: 6.2 5.15
Change-Id: I5e9da66c84457888ec723125d16876891232a99b
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
And bump NTDDI_VERSION to 0x0A00000B (NTDDI_WIN10_CO) at the same time,
to unblock the developers from accessing the latest Windows APIs.
Pick-to: 6.2
Change-Id: Ifbc28c8f8b073866871685c020301f5f20dc9591
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This breaks the build for qmake-based applications,
with the error
Project ERROR: Could not find feature sse2.
Remove the offending section to make applications
build again.
Pick-to: 6.2
Change-Id: I0b22faa1d8d62e208d79879b822e21637bb03a3e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Emscripten only supports
SSE1, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, and 128-bit AVX instruction
sets at this time.
https://emscripten.org/docs/porting/simd.html
Browsers might need to enable simd support in the advanced
configurations
about: config or chrome:flags
Enable by configuring Qt with -sse2
Pick-to: 6.2
Fixes: QTBUG-63924
Change-Id: Ifeafae20e199dee0d19689802ad20fd0bd424ca7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
A qmake project built for iOS-simulator tries to find suitable devices
in xcodebuild.mk.
If no suitable device could be found, the build failed with
xcodebuild: error: missing value for key 'id' of option 'Destination'
which isn't that helpful.
Detect the situation in xcodebuild.mk and print an error message.
Pick-to: 5.15 6.2
Fixes: QTBUG-77222
Change-Id: I02f9ab0dd7b8f234bcd8d0ea387927f31ca092e0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
With single_android_abi, the file qmake_qmake_immediate.qrc is laid
directly into the root of the build dir and not under different abis
dirs.
Pick-to: 6.2.0 6.2 5.15
Fixes: QTBUG-87669
Fixes: QTBUG-95202
Fixes: QTBUG-95235
Change-Id: Ie13cccdf2fc323e8fd725a94f3aacab465fa1287
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
It is no longer handled separately from Android.
This effectively reverts commit 6d50f746fe
Change-Id: Ic2d75b8c5a09895810913311ab2fe3355d4d2983
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The following snippet in a .pro file resulted in a build error:
CONFIG += lrelease embed_translations
TRANSLATIONS += foo.bar_de.ts
The variable QM_FILES was incorrectly calculated. The extra compiler
that calls lrelease uses QMAKE_FILE_IN_BASE, which wraps
QFileInfo::completeBaseName(), resulting in "foo.bar_de.qm".
The $$replace call that calculates the .qm file name however, produces
"foo.qm".
Fix this mismatch by adjusting the regular expression to behave like
QFileInfo::completeBaseName().
Pick-to: 5.15 6.2
Fixes: QTBUG-79016
Change-Id: I545d1b58170cd5229007faf31c9b2c6f70ff75a6
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
If automatic signing is enabled (which it is by default), then Xcode will
happily set up the required profile if you open and run the application
in Xcode. To get the same behavior for xcodebuild, and hence from Creator,
since it's calling our Makefile wrapper around xcodebuild, we need to
pass the -allowProvisioningUpdates flag to xcodebuild.
Fixes: QTBUG-95565
Pick-to: 6.2 6.2.0 5.15
Change-Id: I9325bb228bdfb4d07658eff8f41798f7b5a6955c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
By the time of Qt 6.2 release all new apps targeting Play store must
target API level 30 (Android 11) or above (starting in 08/2021 for
new apps and 11/2021 for existing apps' updates).
Pick-to: 6.2 5.15
Task-number: QTBUG-94451
Change-Id: Id7fa2fd62899a7259e365c917292c6c3ac0d2b0d
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Make it possible to select the C17/C18 standard with
CONFIG += c17
or
CONFIG += c18
Pick-to: 6.2 5.15
Fixes: QTBUG-96026
Change-Id: I719d22366c3efda009118d58ead173a25ed285c0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Consider a release-only, non-framework Qt build on macOS. Building a
debug user project would fail, because qmake tried to link
against *_debug.dylib and *_debug.a libraries.
Building a debug user project that uses QtUiTools against a release-only
framework-build Qt posed the same problem. QMake tried to link against
the libQt5UiTools_debug.a, which does not exist.
Fix this by maintaining a list of library file candidates, and use the
first existing one (or just the first one if none exists). This favors
the library matching the user project's configuration but falls back to
the release version of the library if necessary.
Fixes: QTBUG-81251
Pick-to: 6.2
Change-Id: I8d641104718edb16500c6d6e3994e736fa5ddcf4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If QMAKE_APPLE_DEVICE_ARCHS is not set, we pick up the available archs
based on what Qt was built with (QT_ARCS), but only build the active
arch.
Pick-to: 6.2
Change-Id: I83273f878022af34a3a0d0eeae8b11d781f78c49
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This reverts commit c686e885c0
and commit d64abf8166.
We don't feature .qmake.cache/.qmake.super files anymore in the
source directory, so there's no problem anymore.
Change-Id: Ib820a109fbfbad70d85b0f14ef72915882217ca3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When dealing with a universal build of Qt, we would end up
using the QT_ARCH as the architecture for user projects,
but this architecture is always the primary one that Qt
was configured with.
Instead of relying on QT_ARCH, we start writing QT_ARCHS
(plural) to qconfig.pri, based on CMAKE_OSX_ARCHITECTURES,
and then use that to initialize QMAKE_APPLE_DEVICE_ARCHS.
We then resolve the active arch using uname -m, matching
what CMake does.
We still feed all the available architectures to the
Makefile or Xcode project, so that the user can build
for any of the available architectures without needing
a reconfigure.
Fixes: QTBUG-93760
Change-Id: I0d338241ba4d944ca36d85371e9c4df7dbc4f269
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This increases link time significantly; instead set
"-g4" or the new "-gsource-map" only if source maps
are enabled.
Change-Id: Ibe2d438d48e9ae2fce5f79d4e8a9f17c01cf2485
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
If we already have the list of Android ABI in BUILDS, it's not
necessary to generate extra resource while Qt build.
Amends: 58556afb69
Pick-to: 6.0
Pick-to: 6.1
Pick-to: 5.15
Fixes: QTBUG-88031
Change-Id: I344efe6c477461659a360281da59c4abeae18fc2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Xcode's new build system checks duplicated entries when building. Qmake wants to embed
the launch screen for all types of configurations (static libraries etc.) which makes Xcode bail
out with "Multiple commands produce LaunchScreen.storyboard".
Pick-to: 6.0 6.1 5.15 5.12
Task-number: QTBUG-71035
Change-Id: I5c028e687f16e046b12156c1a8a89540deba4d3b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since we don't feature it for CMake, there's little point in keeping it
for qmake.
Pick-to: 6.1
Change-Id: I7f17d2536510c0b94dca9767036ceab7ec08e1d8
Reviewed-by: Tino Pyssysalo <tino.pyssysalo@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A few configure defines get changed:
QMAKE_WASM_PTHREAD_POOL_SIZE is now QT_WASM_PTHREAD_POOL_SIZE
QMAKE_WASM_TOTAL_MEMORY is now QT_WASM_INITIAL_MEMORY
QMAKE_WASM_SOURCE_MAP_BASE is now QT_WASM_SOURCE_MAP_BASE
device-option EMSCRIPTEN_ASYNCIFY=1 is QT_EMSCRIPTEN_ASYNCIFY=1
To create source maps for debugging. use
device-option QT_WASM_SOURCE_MAP=1
Task-number: QTBUG-78647
Change-Id: If9f30cd7fb408c386d6d69b5f7b1beecf1ab44b5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
To not disturb the qmake build we kept syncqt.pl in <src>/bin but
installed it to libexec. This is not necessary anymore.
This also removes the need for having syncqt.pl in both, bin and libexec
in the build dir of qtbase.
Pick-to: 6.1
Fixes: QTBUG-91076
Change-Id: I44b014ea41e3f00c420e02fd5c76f11169340b8c
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
[ChangeLog][Build System] Tools that are called by the build system and
are unlikely to be called by the user are now installed to the libexec
directory.
This is a step towards easier co-installability of different Qt
versions.
Pick-to: 6.1
Task-number: QTBUG-88791
Change-Id: Id19575b5ba27795f7715e4ea6a09391b26dd4942
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This will be used to access host tools that are installed in
${prefix}/libexec instead of ${prefix}/bin.
Pick-to: 6.1
Change-Id: I36c4b5736330f8229d267a117c65d55cd5e12758
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Fix condition when adding qmake_immediate to resources. This condition
was wrongly positive in any non-android case, but also had to check for
BUILD emptiness or build_pass. This cause issue because
qmake_qmake_immediate was added to the RESOURCES variable earlier, than
actually generated.
Fixes: QTBUG-88031
Pick-to: 6.0
Pick-to: 6.1
Pick-to: 5.15
Change-Id: I38dad858a7e81ab709e622ec24baa8f9b80970fa
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
comply with the api version used by default with androiddeployqt and
in docs. Google play also requires api 29 as minimum.
Task-number: QTBUG-90943
Pick-to: 6.1 6.0
Change-Id: I05e2a90b4d7f2120b0198e3fb7b8b1b2398eba93
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
The macOS SDKs now follow the same major/minor version scheme as iOS,
where the major version is bumped for each OS release.
Pick-to: 6.0 5.15
Change-Id: I021421a9c58bb1ae64bc0c63b4215f14e4ada358
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The qmake variable QMAKE_APPLE_DEVICE_ARCHS was added for iOS,
to support universal builds, as the QT_ARCH is a single value.
Since the qmake macOS builds are non-universal (at the moment),
we remove the hard-coded value for QMAKE_APPLE_DEVICE_ARCHS on
macOS, and let the normal architecture test resolve the arch,
like on other platforms.
To ensure that the following configuration tests are run with
an -arch argument, we trigger a commit of the preliminary Qt
configuration after running the architecture test. This is not
strictly necessary, but makes it clearer what's going on during
configure.
The device_and_simulator configuration option was used by the
iOS toolchain, and needed to be moved up in the configuration
test order to not break later tests.
The logic in mac/default_post.prf for both Xcode and Makefiles
to add -arch flags was kept as is, based on the existing
variable, to avoid too many changes to this logic.
The logic in toolchain.prf was amended to make it clear and
ensure that it only applies to iOS builds. macOS builds do
not have this issue.
Pick-to: 6.0
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I70db7e4c27f0d3da5d0af33cb491d72c312d3fa8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When doing static builds any project which uses same
libraries as qtbase 3rd party libraries will most likely
end up in broken binaries, since symbols will be
included twice. Moreover, libraries can have different
versions. Install 3rd party headers and meta data for:
* qtlibpng
* qtfreetype
* qtharbuzz
Pick-to: 5.15
Task-number: QTBUG-87154
Change-Id: I243dff9a12a95af20dee414f55bb762b8d579c81
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qtdeclarative's QtQml module adds a dynamically generated qmldir file to
its RESOURCES which is located outside the source directory.
Previously this caused qmake to generate an invalid alias for the qmldir file.
Now the relative path is discarded properly.
Fixes: QTBUG-88204
Change-Id: Ia689d9d110db092cee595bf44fcbb6d57783fded
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Depending on the presence and behavior of HEADER_MODULE/header_module
in CMake and qmake land, the module.pri might end up with an empty
module line, which means adding the module via QT_PRIVATE += entrypoint
will not link to the static library.
To avoid this problem we write an explicit module entry (QT.foo.bar)
into the same module.pri file as the one generated by qt_module,
where the auto-generated one has header_module enabled, and hence
no link behavior, while the manually written entry has a module
component, and will ensure linkage to the static library.
Change-Id: Ib98484f74410fab45c4d109f3610028200fba0c5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The flags go before the library in the final linker line, as opposed
to the dependencies declared in LIBS.
This allows us to declare the flags for the entrypoint
in the project file of the entrypoint, instead of in
a standalone prf.
Change-Id: I35c054fe9fdaa6add7cd0e8ba3f7304f975ff80f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On the qmake-side we had exports, but they were quoted.
Change-Id: I95af4b927079691cab6403fec850f345ba181a00
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Beginning with Visual Studio 2017, vswhere should be used to discover
Visual Studio installations. Installations of 2019 and up are not even
registered inside the registry anymore, so vswhere is the only way to
obtain information about these.
Pick-to: 5.15
Task-number: QTVSADDINBUG-819
Change-Id: Ibd8b2c4d38c7925857887f39e750e87a33f08bf9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
As a result of b5af140809 the link dependency to the
mingw32 static library was ordered after the entrypoint
library, which resulted in the WinMain symbol not being
found during linking due to how the static linker processes
archives.
Fixes: QTBUG-87725
Change-Id: I8e075f91f7f06dcdc618a4e0ae6d9c1d832888c0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We need to ignore this option in qt_configure.prf.
This amends 077ea0c633.
Task-number: QTBUG-87049
Change-Id: If05b16a95d0830df9ca63961576981f8983820cc
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The use-case is relevant for other platforms as well.
Now that Qt has a module system we can also replace a lot of the
hand crafted logic for linking with simpler constructs.
Change-Id: Ib6853aaf81bfea79c31f2de741d65b4b56f23ef6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The code only existed to avoid the auto-generated
Q_IMPORT_PLUGIN(QIOSIntegrationPlugin), but nowadays
with bitcode enabled the code is not used, plus we end
up with this auto-generated file for other plugins anyways.
Change-Id: I91c8c88f4e825caab7d7d5250edaba8c57cb7374
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On Windows shell, using unix path format might not work, since the shell
expects backslash paths only.
Pick-to: 5.15
Task-number: QTBUG-87066
Change-Id: I51741b475c1ede11336df63ee1c6092c792c16ef
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Remove the stale Qt 5 CMake files.
Disable the generation of CMake files by the qmake build system,
it wouldn't create usable Qt 6 files anyway.
Keep mkspecs/features/create_cmake.prf and
mkspecs/features/cmake_functions.prf for now until we can confirm that
they are safe to remove.
Task-number: QTBUG-86827
Change-Id: Idcf59f4d7d5474171a9bf72904ff19adc8bc74cd
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qmlimportscanner and rcc in Qt 6.0 are part of the host installation
and not in the target installation which androiddeployqt expects it to be.
Fixes: QTBUG-86831
Change-Id: I9d7a6fce3d2f109bab933fcfd7fdd5d2c83821a8
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
All system frameworks use 'A' instead of the major version of the
framework, and Xcode's code signing assumes that the framework version
is 'A' when signing embedded frameworks (FB7323980), so leave the
version 'A'. This is also what Apple recommends.
Change-Id: Idbf2e30e156c3e869da8f75731e568524d9407e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Clang doesn't automatically switch architecture just because we're
passing an iPhoneOS sysroot. In the past this resulted in a warning
about trying to link an x86_64 binary to arm64 libraries, but with
Xcode 12 this is now a hard error.
Fixes: QTBUG-86718
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I7e9d2ca513d276029fc2a6cfe694a35fe41c39b3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Use -source 8 and -target 8 for javac by default.
Task-number: QTBUG-86282
Change-Id: I291beab4df166468972138822ca26f01c9666985
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The configure options -android-javac-source and -android-javac-target
can be used to set the version numbers.
Fixes: QTBUG-86282
Pick-to: 5.15
Change-Id: I36b0665de2c31e16bf6d138859b5503455eb8e66
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
If '-make examples -no-compile-examples' was specified, sources of Qt's
examples would be installed, but the examples would not be built.
This switch has always been a source for confusion and is only
interesting for distributors, who can just package the examples
directory tree.
Change-Id: I0291d70e4951d98b553a4abf217db49d05316d3a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
AndroidManifest.xml file and the Android plugin already has a way
to provide commandline-arguments to app with the tag
"android.app.arguments". This change allow to set it from qmake/cmake
and allow Qt Creator to use that.
Task-number: QTCREATORBUG-23712
Change-Id: I3e680f40fd36ba6aaac7f344fb9509d2c3360e74
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Before this change, configure -force-asserts would affect qmake-based user
projects too, potentially forcing the user to remove the
QT_FORCE_ASSERTS define in their own projects.
[ChangeLog][configure] The -force-asserts option now affects the Qt
build only, not user projects.
Change-Id: Iecca3c9f7e8261996c5d8bcba8adbc0db1dc1c99
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
C4180, C4458 were disabled already in 2012, in commit 6668f5becf.
C4577 was disabled due to QtScript being compiled without exception
support in commit 97d7d80e73.
Anyhow, Qt Script is now officially gone in Qt 6, and Qt headers
do work just fine with C4180. Finally, C4458 is nowadays a W4 warning,
so not enabled in the first place.
Task-number: QTBUG-82615
Change-Id: I2f9b8e858817876b069a166129fbfac7ef3587a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When configuring with Qt only with one ABI, certain code paths were
not triggered, which led to a few issues:
- The deployment json file generated by androiddeployqt listed
no architectures.
- The compiled shared library did not have a lib prefix and arch suffix,
which androiddeployqt during the deployment / make apk step.
To fix the architectures missing in the json file, ANDROID_ABIS needs
to be set in android/resolve_config.prf also in the single abi case.
To get the correct file names, android.prf needs to apply the prefixes
and suffixes not only in the build_pass case (multi-abi) but also in
the single abi case (except for config.tests).
The application-binary entry in the json file needs to be without the
extra prefixes and suffixes though, so make a copy of the TARGET value
to be used in the json file, before the name manipulations are
applied.
Pick-to: 5.15
Task-number: QTBUG-85399
Change-Id: Idde92ab7fe883636ccc65a87b91c8a3fc72eefbb
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
QML2_IMPORT_PATH it's usually set by CI to tell the QML apps where to
find the QML components
Change-Id: I57d1cbc3d0fce9be257648268da0a5f9d61d81e9
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
First and foremost the condition was wrong ...
In order to help running qml test cases on Android without any android
specific hack on
user's .pro files we copy the entire project folder to assets. I copy the
entire folder
and not only the tst_*.qml files because it might contain data which is
needed by the tests to run.
Change-Id: I06323d9d52904317410dd2f440de65a0766a48b5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
This amends 0ef46b41d8 to ensure the
new configuration is styled correctly for qmake.
Task-number: QTBUG-80938
Change-Id: Iebfff3ff0570d2e92d01d4eb1178c0d6261468f9
Pick-to: 5.15
Reviewed-by: Lars Schmertmann <lars.schmertmann@governikus.de>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We don't appear to have implicit fallthroughs in our code anymore. The
last deprecated copies and redundant moves are also gone.
The other warning never had an explanation and doesn't show up when
building full Qt anyway.
Change-Id: Iad959315ad374ef288f5fffd15d683599a1a11b9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
As stand-alone executables are not tracked by Launch Services,
which is responsible for applying the low-dpi override at runtime.
Change-Id: Ifac71dfa9b9ffa5ab1302dfca8fa1f5ddd491082
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
gcc doesn't report warnings for final methods since version 9.2:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78010
Change-Id: I7152351aac0e3bad86d777e119f25137ef97ec6f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
It doesn't understand the arguments we usually pass to testlib.
Change-Id: Iea83d1d8c31a510b2bc442cbfc810eac631322e7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For those who are providing their own launch images for their iOS
projects then QMAKE_IOS_LAUNCH_SCREEN can be set to point to the
location where the launch image to be used over the default.
[ChangeLog][Platform Specific Changes][iOS] Added support for
specifying a launch image to be used for an iOS project. This can be
achieved by using QMAKE_IOS_LAUNCH_SCREEN.
Change-Id: Ibb236655b282132ab5eee747986a93abb9802200
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In Qt5, the -qtlibinfix option did not affect the naming of plugins,
unless -qtlibinfix-plugins was set. This option was added in
5641650993 to offer a way to have -qtlibinfix affect the plugin names
without changing the default behavior. We now remove the
-qtlibinfix-plugins option, as the old behavior is not desirable.
[ChangeLog][configure] The -qtlibinfix option now affects the names of
plugins. The -qtlibinfix-plugins configure option was removed.
Task-number: QTBUG-15192
Fixes: QTBUG-85439
Change-Id: I96f5c2577b76274929c431621967df0e9b4631b7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Apple deprecated the entire OpenGL API in favor of Metal, which
we are aware of, so we don't need to see the warnings when building
Qt.
Instead of applying the silencing globally for all Qt consumers,
both internal and external, we now limit the silencing to Qt itself.
That means user code that explicitly uses any of the deprecated APIs
will see the warnings. Note that this does not apply to merely using
any of the Qt OpenGL APIs. The user has to explicitly use the platform
APIs that have been deprecated.
The warnings need to be disabled on a build system level, so that
that they are passed as -D flags on the command line. If the defines
were done in Qt headers (qguiglobal.h e.g.), they would require the
user to always include this header before any of the Apple headers.
Change-Id: I3f2a2a5211332a059ad4416394251772c677fdcb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When building qtbase for iOS with CMake, and then trying to mix build
qtsvg with qmake, the value of MODULE_BASE_OUTDIR was wrongly set
to the host prefix because that usually coincides with the target
prefix when doing builds with just qmake.
That is not the case for CMake builds, where the host and target
prefix locations are necessarily different.
This caused syncqt to place the forwarding headers inside the host
prefix location instead of the target prefix location, and thus
compiling qtsvg files failed.
Make sure to use the target install prefix instead of the host one.
Task-number: QTBUG-82581
Task-number: QTBUG-84781
Task-number: QTBUG-85240
Change-Id: I592be0b2799c72c11497c8adc12be13106082cfc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
First of all cmake and qmake used a different standard.
Secondly, the qmake logic enforced lvl 23 (if it was installed which
is the case on the failing machine). When this is combined with
f71a400bf6 which requires lvl 28 API to build, the android build fails to compile.
cmake logic was even worse as it enforced lvl 21 API to be used if installed.
This change requires pick to 5.15 as f71a400bf6 was picked as well.
Pick-to: 5.15
Change-Id: I89a7193b711b8bf927d02907343a49d6f27082ce
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Remove the warning message that was introduced in 84f2792597.
It is triggered for debug_and_release projects that are built against
a single-configuration Qt. Silently fall back to the behavior before
84f2792597 like it always was the case.
Change-Id: I67ed1a145ec5d7a4047b0ce5ad43bf0fc6834d60
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
CMake's default import library extension for MinGW is .dll.a. The code
in qt.prf that resolves the values of the QT variable expected an .a
extension.
To play well with CMake world we keep the the .dll.a extension for
Qt's libraries and teach qt.prf to handle both. In order to do that we
need to check for the existence of the .a or .dll.a file. If none of
these candidates was found we print a warning and fall back to the old
behavior.
Task-number: QTBUG-84781
Change-Id: If394f2d6acd104deb0c3a49240009a1900a506f7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
