Same as other versions of MSVC
Fixes: QTBUG-80328
Change-Id: I05c5ffe6d36e0cdfb781080a736c90b6a6d4b2ba
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The one that is a getter for the last error found. This is to disambiguate
the expression '&QAbstractSocket::error'. Introduce a new member-function
socketError as a replacement.
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the getter) is deprecated; superseded by socketError().
Task-number: QTBUG-80369
Change-Id: Ia2e3d108657aaa7929ab0810babe2ede309740ba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Note the following bigger things that had to be done:
Handle GSS library / feature with a new custom find module.
Implement rudimentary support for relocatability (does not currently
handle extprefix).
Change-Id: Ic6cd27dda7ebca9829f51cb42ea76fff6d1767ef
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The requirement to separate debug and release DLLs on Windows stems from
the Visual Studio C run-time library appearing in two different variants
(debug and release) and not mixing well. It's possible to perform builds
without optimzations and with debug symbols while linking against the
release version of the C run-time, but at the same time the debug
version of the run-time brings other developer visible advantages.
MinGW on the other hand does not have this distinction, does not ship
with separate DLLS and does also not require the VS C runtime library.
Therefore we do not need this separation for MinGW, which means that our
packages can be reduced in size and application developers wishing to
debug their applications do not have to use debug builds of the Qt
libraries or run into Qt internal debug code.
Task-number: QTBUG-78445
Change-Id: Idf588606091298dc44262c4c89e689df18d34747
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
This is needed to make sure the output directory is in the correct
place somewhere under tests, rather than in $prefix/bin.
Change-Id: I98afa9c0a7517a8a10866b4c626bd4c4d2fd214f
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This change removes the leftovers form other cleanup commits.
Task-number: QTBUG-76491
Change-Id: I61440f87c5a280f9666b78e19aac4d8ac603767e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Before testserver becomes a stable feature, let's keep testserver.prf in
"mkspecs/features/unsupported". The test server's shared files will be
stored in "mkspecs/features/data/testserver".
Because the path of testserver has been changed, all the tests relying
on the docker servers should be updated as well.
Change-Id: Id2494d2b58ee2a9522d99ae61c6236021506b876
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Currently docker is only used for the "echo" test, and then only the
echo server. The SOCKS5 tests have been disabled from when our current
test server was new.
Change-Id: I21b0c5f10e722a42a0880b2500d1bcbc609a03bf
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It fails on CI (Windows 10). Given our qabstractsocket disables
read notifications/stops emitting readyRead if it already has pending data
(unbuffered, aka UDP socket type) - make sure we do not suffer from this.
The change does not affect the test's logic (unless the logic was to fail),
it just makes it more fail-proof.
Change-Id: I6c9b7ded20478f675260872a2a7032b4f356f197
Fixes: QTBUG-73884
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Unlike higher scopes (like scope 4, admin-local, which the last commit
used), scopes 1 and 2 require a scope in order to bind, even if some
operating systems are lenient. So test that we are able to bind to them
and do bind properly.
Change-Id: Ifb5969bf206e4cd7b14efffd14fba153eab965b9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Binding without an interface and expecting the OS to select something is
not supported in all OSes. On FreeBSD, I keep getting EADDRNOTAVAIL. So
modify our test to only join, leave and send to multicast groups with an
interface selection.
With this, all tests either pass or are skipped for me on Linux,
FreeBSD, and macOS. On Windows, this revealed an inconsistency in
behavior, which this commit adds a workaround for.
Change-Id: Ifb5969bf206e4cd7b14efffd14fb6815456494d2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
tst_QUdpSocket::broadcasting and tst_QUdpSocket::pendingDatagramSize
fail on the new Ubuntu 16.04 clean template.
Task-number: QTBUG-65440
Change-Id: I0e973b9c90b7c5827406bac8138370b61992a115
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The FreeBSD kernel treats them specially, just like link-local (that's
probably why it calls them "interface-local" instead of "node-local").
So instead let's use a random address, which will avoid multiple
tst_qudpsocket, when run on the same network at the same time,
receiving each other's datagrams. It could happen, considering this test
has an 800-second timeout limit.
Change-Id: Ifb5969bf206e4cd7b14efffd14fb592a3166547e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is not an official feature of the networking stacks and does not
work portably across operating systems. So just stop trying to do that.
This was failing reliably (not flaky!) with IPv6 on FreeBSD and
Windows. For IPv4, Windows apparently accepts 239.255.0.0/16 but not
other addresses, so remove IPv4 too.
Change-Id: Ifb5969bf206e4cd7b14efffd14fb682c2839e95d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Test fails to start on FreeBSD:
FAIL! : tst_QUdpSocket::initTestCase() 'networkSession->waitForOpened(30000)' returned FALSE. ()
Loc: [/usr/home/tjmaciei/src/qt/qt5/qtbase/tests/auto/network/socket/qudpsocket/tst_qudpsocket.cpp(234)]
This commit is basically a revert of the Qt 4.8 commit
a951fb79139498774d021759d0466b4b2ff50e68. FORCE_SESSION was only used by
manual testing, as the commit message said
> 8. For manual testing, added the FORCE_SESSION macro to test behaviour
> of UDP sockets when they have an explicit network session associated
So I doubt it has been tested recently.
Change-Id: Ifb5969bf206e4cd7b14efffd14fb569ebf53497b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
I broke it in commit 4da2dda2aa. It wasn't
flaky or anything: it was plain broken and would never pass. That
indicates no node in the CI has an IPv4 link-local address (and
apparently neither did I at the time).
Change-Id: Ifb5969bf206e4cd7b14efffd14fb62176546916e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
FreeBSD, for example, does not have SO_NREAD and its FIONREAD returns
the full socket buffer size, including IP and UDP headers.
Change-Id: Ifb5969bf206e4cd7b14efffd14fb5d8ca778d16a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Similar to the problem found in QTcpSocket auto-test recently.
While the failure on CI looks differently (apparently, server process
starts but does not print anything), fixing the dependency does not
hurt and at least fixes the 'make check' scenario.
Change-Id: I8f29f3e492d22410533407a527f5fc8f664e7f5c
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Looks like I never even tested this. There were two problems:
1) when we asked for the recvmsg and sendmsg functions, we used the
wrong variable (socketDescriptor was still -1)
2) we extracted the destination addresses, but never set them in the
QIpPacketHeader object
The added tests confirm that this works on Windows, Linux, Darwin,
FreeBSD. There also seems to be a problem, obtaining the destination
address on an IPv4 socket with a dual-stack sender (I can reproduce that
on FreeBSD, macOS and Windows, plus an old version of Linux).
Task-number: QTBUG-63605
Change-Id: I638cf58bfa7b4e5fb386fffd14ea732bddbc0c42
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The sources were already added conditionally in the project file since
179fe5981f.
Change-Id: I0baaec2e772f3e596d311c1973b9745aa2b80423
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When ::WSAIoctl() reports 1 byte available for reading, we are trying
to peek an incoming datagram to ensure that the data is actually
delivered. But, according to MSDN docs, we are not allowed to pass NULL
as 'lpNumberOfBytesRecvd' parameter to ::WSARecvFrom() call, if
'lpOverlapped' parameter is also NULL.
The case with an empty datagram is fixed accordingly.
Change-Id: Id13038245332d3fb4bc18038d44a7cfd7ce04775
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is the result of running the (experimental) clang-tidy check
qt-modernize-qsharedpointer-create
Discarded changes:
- tst_qsharedpointer.cpp: not sure we want these replacements there
(→ separate change)
- tst_collations.cpp: hit in a template specialization that is
instantiated with both QSharedPointer and QSharedDataPointer.
Change-Id: I203c2646e91d026735d923473af3d151d19e3820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test fails as sendmsg() on the socket trying to deliver a packet to
the IPv6 link-local fe80 address returns with -ENETDOWN. I cannot figure
out why this happens when RHEL 6.6 is run under qemu/kvm but not under
vmware. More details are in the task, but meanwhile the result of this
test is ignored.
This affects only RHEL 6.6, it passes on RHEL 7.2.
Change-Id: I4ade5cd249dd0d1901368ab571dad324e0fd10c2
Task-number: QTQAINFRA-1042
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
There were two more places that blacklisted certain interface types that
commit e579c822c5 didn't catch. This
commit adds those two.
Task-number: QTBUG-61263
Change-Id: Ia58d0480a9169f0f121aec03bf2e8900a58939cd
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Packets sent to to link-local addresses on it are never received. We
don't know why this happens, as the tooling provided by Apple for
development is close to useless. So we just ignore this interface.
Task-number: QTBUG-61041
Change-Id: Ia608df1fff6bdee5238e107d8a50292a1f9e5c03
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
QEMU does not support all syscalls needed for udp socket testing.
Skipped tests that can't pass on QEMU.
Change-Id: I40882207a47cfafbc3becb3dff8e7cead9676255
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This commit adds a new class called QNetworkDatagram that encapsulates
the IP packet header and UDP/IP stack metadata along with the actual
payload data. It can be used for both receiving as well as sending data.
It's called QNetworkDatagram so it can be used by QSctpSocket too, when
that lands.
[ChangeLog][QtNetwork] Added QNetworkDatagram class, along with new
function receiveDatagram in QUdpSocket that returns it and an overload
to writeDatagram that can accept it.
Change-Id: Iee8cbc07c4434ce9b560ffff13ca467f425ddc3d
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
This is the second attempt to remove 'insignificant' from UDP socket test to:
- make changes ending up in regressions more difficult (hopefully impossible) to merge
- switch to BLACKLIST if needed
- make flaky tests more visible.
For now this 'back to significant' will be accompanied by extended BLACKLIST.
New in BLACKLIST:
* OS X - datagram size-related problems (fixed in 5.7)
* OS X - multicastLeaveAfterClose - will probably stay BLACKLISTED,
seems to be a Darwin's quirk, can be fixed in OS X >= 10.10.
* windows ...
tst_QUdpSocket::echo seems to fail randomly on OS X/linux and
it looks like it fails at the same time on different machines,
should be something server-related (a guess only).
Change-Id: Ib344348ffab03fab1b9309b80449a04d8ce247c6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This reverts commit 11ad50074b.
Unfortunately, udpsocket strikes back this time on OS X < 10.10 -
never seens these test failing before. Since this prevents 5.6->5.7
merge, I have to revert it until the problem investigated/fixed on OS X.
Alas :(
Change-Id: I52f6512d88c25d2e3071cb845e91faefbd455e27
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
