- After reset a surface we must call makeCurrent before we are usign
swapBuffers.
- No need to set the surface in QPA when surfaceCreated are called in
QtSurface.java, some time the OpenGL surface is not fully initialized at
this stage. Is better to wait for surfaceChanged which is always fired
at least once.
- DO NOT reset m_surfaceId to 1 when there is no surface. The problem
is that if we have one surface and when we distory it we don't (need to)
wait for its surfaceChanged/surfaceDestroyed notifications, and if we
create another one quicly it will have the same id (1).
Task-number: QTBUG-39712
Change-Id: I2aa31e5b59d81ef3b03624d4636a4381eea6d543
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Unfortunately the few functions that are part of the OpenGL ES 3.0
standard and are used by QtGui have to have special handling after all.
Just directly calling the functions causes issues when building on a
GLES3 capable system and deploying somewhere where only GLES2 is available.
Using eglGetProcAddress and such is not an option because the ES spec does
not guarantee that standard functions are resolvable via that mechanism.
Task-number: QTBUG-43318
Change-Id: I72f985d75ca669835839016573cbb8e4a3fb41db
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
There's no need to allocate memory for the special address.
Change-Id: I5f3760565807731ab595e91fc934c21d10df212a
Reviewed-by: Richard J. Moore <rich@kde.org>
Commit d44781730c disabled use of pkg-
config on Mac, which in turn automatically disables all of the tests
that depend on pkg-config too, like D-Bus. If you then use the -dbus
flag, configure would error out telling you that it couldn't find D-Bus,
despite it being there.
Now we print some helpful information on error and extra information for
finding out why it may have got disabled.
Change-Id: Ic4e41c58d62d80eb1a0f3ca1c93529e049aaf231
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is not used or referenced anywhere
Change-Id: I02e1aa76631627f64e5d1f9b36a13cdb5677e93f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2013 and 2015 compile this fine. I didn't test 2012. I wouldn't have
fixed if the objective weren't to enable QtDBus by default on all
architectures: since it is, we can't have Qt fail to compile from
sources on MSVC 2010.
qdbus_symbols.cpp(92) : fatal error C1001: An internal error has
occurred in the compiler
Change-Id: I42b930bc37c4e478a66725d83c8a73836fbf567c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
we are in an #else of #ifndef QT_BOOTSTRAPPED here already.
Change-Id: I02c4ff2959490110c21ad1016c664b7ddcfea7c0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On Windows mouse grabbing doesn't work across processes, which
means we're interacting with other windows when picking colors.
Workaround that by having a transparent 1x1 window below the cursor
at all times so we catch the mouse click. Clicking before the window is below
the cursor won't happen because our timer interval is 30ms, so it's quite fast.
It's hacky but it's what we can do for a feature which was very broken on Windows.
Task-number: QTBUG-43663
Change-Id: I295378e033ddc6d9c2230335f0953a727c21e1dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
It was not possible to determine whether Qt is being built as
a shared or static library in the config tests, as that information
was not added to QMAKE_CONFIG used in the compileTest function.
For linking to ICU on Windows, there is logic which depends on
it in config.tests/unix/icu/icu.pro, but was broken for the static
target, as the expected library name was not found (icuXX -> sicuXX).
Change-Id: I22c2d543ea14feebbad36961c9a29e99f66323ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The window size was too small on high-DPI screens.
Save the default text color instead of setting it to black.
Change-Id: I78b50624110be0cb1d077d3782d421eb323f4fb0
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
A mismatch between requiresPretransformedGlyphPositions and
shouldDrawCachedGlyphs in QRasterPaintEngine will cause the text
position to be transformed twice when using drawGlyphRun on a QPainter
with a perspective transform. Since this case falls back to drawing
text as paths there is no reason to require any special treatment.
Change-Id: Ib1c14aee4cc6774dd8feadc5748f0b0ee59633b9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
On e.g. Android, the tabs will be scaled by DPI. This breaks the
logic in the QTextLayout tests for tabs. It's not possible to
just scale the expected sizes either, since the whole text layout
will be affected by font sizes and scaling, and it's difficult to
predict where characters will land on different platforms and
resolutions.
To avoid breaking this test on other platforms, we just skip them
when we know they will break. Since the code tested is
cross-platform, this will hopefully not have any significant
impact on our coverage.
Change-Id: I65d6c33c9c6724665983a17f99eadcf1baedcc20
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Include test data on Android.
Change-Id: Ic0890495c0bf8d2e38595585226a03073b043d57
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Change-Id: I22f1eaa892cba23c498ae210a9a483e468268581
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
On iOS 6 and above, [UIViewController supportedInterfaceOrientations]
needs to return 0 for [UIApplication setStatusBarOrientation] to work.
This means once you report a content orientation other than the primary
orientation, you'll disable auto-rotation. Reporting the orientation as
Qt::PrimaryOrientation restores the auto-rotation behavior.
Change-Id: I1b8c765c507728fdbc5b828e0b4215324014e221
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Because carbon is dead, I merged both OSX and Windows in the same note.
Change-Id: I5d43c5fce30e187f63a1e3e5af688c344eb80d28
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Change-Id: I602d8f1c9f20d3bfed4db3405460021146b546d8
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Rotated screens would use the unrotated physical geometry, causing the
calculated physical DPI to be completely wrong.
In RandR, the output does not rotate, so the physical size is always for the
unrotated display. The transformation is done on the crtc.
http://www.x.org/releases/X11R7.6/doc/randrproto/randrproto.txt
Task-number: QTBUG-43688
Change-Id: Ifde192fcc99a37d0bfd6d57b4cdeac124a054ca3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Uli Schlachter <psychon@znc.in>
Add all test data to resources.
Change-Id: I31b0dbb7546a15151f64523c86bf8eb687ff9ec0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
We must add all test data to resources.
Change-Id: I1b18415cd53a27bd23e51ac6b738d3ed94162ac9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
This adds the testdata to a qrc to make them available on Android.
There are still some failures which might be actual errors, and which
will be addressed separately.
Change-Id: I1bdcfb2c6676134ca52388d49a1b2d25cf2813f9
Reviewed-by: BogDan Vatra <bogdan@kde.org>
QWidget is polished when show() is called, so unless you do this
first, QWidget::font() will return a default constructed QFont,
and not necessarily the default specified in the platform theme.
Comparing this to QPainter::font() later, which has been resolved
against the platform theme font, and not the default constructed
font, you can get a mismatch and a false test failure. This
happened on Android.
Change-Id: I41ef5b10879bbd4bb8ef8d52ecaccf5e8e894075
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Fixed a few instances of files that should be deployed to the
file system. The way we do this on Android is via qrc. We also
need a special case for the resources/test.txt, because
QFINDTESTDATA will find this in qrc, but that's not the one
we are looking for.
Change-Id: I7097e8b7795b3a8fd483adad090208f295478412
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The testdata needs to be in a qrc to be available on Android.
Note that a single test will still fail. Since this requires
a platform-independent fix, it will be committed separately.
Change-Id: Ib2438a3298d81d77b7f4f240ef045aa0500d8382
Reviewed-by: BogDan Vatra <bogdan@kde.org>
We must add all test data to resources. Write output data into a writable location.
Change-Id: I5a1c212f6108abf2a82288a2c84cfb31eda5e101
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
AppStore validation requires deployment target to be
at least 5.1.1 for 64-bit applications.
Change-Id: I4d857ad983e6d4059f541bff523dd63479aca849
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
This is broken since 1f461ac45b, where
Z_PREFIX was defined to namespace the bundled zlib symbols. The
bundled zlib is used by bootstrap.pro when cross-compiling which uses
the namespaced symbols. This breaks linking of rcc when --system-zlib
is used, as it will try to link to compress2 instead of z_compress2.
To fix this, the aliases are pulled in via zconf.h and the bundled
zlib is prepended to the INCLUDEPATH (i.e. before the system zlib).
Change-Id: Iec76cbdead40f888e2ac6a887ec8f3b7bc7db501
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Using QDBusInterface causes introspection, which may not be permitted
by some platforms.
Change-Id: I953d27b9c0fc7c21d52fefeb8c7760a7235aed9d
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
QVersionNumber will gain a small-version-number optimization, which
stores sequences of less than 4 (32bit) or 8 (64bit) 8-bit signed
segments inside the class instead of a QVector. Make sure the tests
cover those cases, too.
Change-Id: If1d875c75d284908756b305f767a7218cab5226f
Reviewed-by: Keith Gardner <kreios4004@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
xcb_image_destroy() calls free on m_xcb_image
and then few lines down we access member of
m_xcb_image. Swap order of these two actions.
Change-Id: I01fb43a066459cce462df6af22161c35cef524eb
Task-number: QTBUG-43623
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
The extra ';' causes a warning when gcc is used with -Wpedantic.
Change-Id: I3d99aca6f160e46dbe2173106160474664e06b2c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
if the CTFontDescriptorRef is already contained in m_systemFontDescriptors
we leak a reference, unless we explicitly release it.
Change-Id: I5b263aa52b4433e7e28cc01164098892cc9cd2ae
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
QCoreTextFontDatabase::m_systemFontDescriptors owns the references to the
underlying CTFontDescriptorRef objects. in order to avoid a leak, we should
release them
Change-Id: I8fc6c158908e0173696cd91058ac34efb3de01d5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Hiding the statusbar using the normal iOS APIs result in QScreen
reporting new availableGeometry, which is not what we want. The
scroll of the screen is a purely visual effect, and shouldn't
have any effect on observable Qt APIs besides the keyboard rect
changing.
Instead of actually hiding the statusbar, we achieve the same
effect by raising the key window (and any other application
windows, including the keyboard) to the level of the statusbar,
effectively putting them above the statusbar. This still leaves
popups and alert windows above the key window, as normal.
Change-Id: Ib7694240ca86cfb9000de35bf0c49343ffb37e32
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
The documentation for CFURLCreateDataAndPropertiesFromResource()
does not make this clear but from looking at the CFNetwork implementation
and a user stacktrace it appears that this function can return true
but not set the data argument under certain circumstances.
Change-Id: I48034a640d6f47a51cd5883bbafacad4bcbd0415
Task-number: QTBUG-36787
Patch-By: Robert Knight
Reviewed-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
This commit checks whether CFURLCreateWithString() succeeded.
It does not appear to be possible to enter an empty URL directly in the
PAC configuration dialog but I can't rule out the possibility
that it could find its way into the settings via some other means.
Change-Id: I6c2053d385503bf0330f5ae9fb1ec36a473d425d
Patch-By: Robert Knight
Task-number: QTBUG-36787
Reviewed-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
macQueryInternal() was retrieving the PAC URL string as-entered by
the user in the 'Proxies' tab of the system network settings dialog
and passing it to CFURLCreateWithString().
CFURLCreateWithString() returns null if the input string contains
non-URL legal chars or is empty.
Change-Id: I9166d0433a62c7b2274b5435a7dea0a16997d10e
Patch-By: Robert Knight
Task-number: QTBUG-36787
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Markus Goetz <markus@woboq.com>
The non client mouse events have the right information regarding the
modifiers now so the old code covered with Q_WS_WIN can be removed.
Change-Id: I3e4ebc0debdd66970b18233f189b5d9e880e40a9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
With the -load_all option turned on then it will cause a problem with
the network bearer plugins as they share the same files and on OS X
two plugins will be built and potentially linked against when building
statically.
This only effects gcc builds because clang does not turn this option on
when linking by default either.
Task-number: QTBUG-39238
Change-Id: Ib259304c3da74b6b4f6fcc6e3766427303af3bbe
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
The change 35bc3dc45a moved some padding out
of QTextureGlyphCache into the font engines directly, however this was not
done for the DirectWrite font engine so it caused a buffer overrun.
Task-number: QTBUG-41782
Change-Id: I4e643159036f06c5edd8a742dc6694d517a47826
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
The warning was triggered when increasing the fixed size of a window.
If there is a real violation of the size constraints, the below
warning will show.
Task-number: QTBUG-43420
Change-Id: I85d7d0a91d040aa3ddeff8c3d105351efd5e14a9
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The capture needs to be cleared when for example a modal dialog
is opened from a timer slot or similar while moving the window.
Task-number: QTBUG-43308
Change-Id: Id0c01080d67d1057004a7f85b037dce5e220de42
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
