The find script checked for UIKIT which is set during a Qt build
in QtPlaformSupport.cmake but is not set when building a user project.
This casused the find script to skip the iOS specific code that
passed the -framework OpenGLES linker flag.
This broke SDK switching in Xcode.
Check the IOS variable instead which is set by CMake for all projects
that pass -DCMAKE_SYSTEM_NAME=iOS.
Pick-to: 6.1
Change-Id: I9bd088f317917544ccfeff61fc4ff90f18f0f3d8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Before this change, we created a CMake toolchain file for iOS and
macOS universal which propagated the initially configured
CMAKE_OSX_ARCHITECTURES values to user projects.
So if Qt was configured with 2 arches, configuring a CMake user
project using the generated toolchain file would also build the
user project targeting those 2 arches.
The reason for this that the same toolchain file is used for
configuring both Qt and users projects and we needed to ensure that
other Qt repos are built with the same set of arches. That
unfortunately led the multiple arches to carry over into user
projects.
This is different from qmake behavior which configured user projects
with 1 arch only.
Instead of the toolchain file explicitly setting
CMAKE_OSX_ARCHITECTURES for all projects, save the initial list of
arches into QT_OSX_ARCHITECTURES.
Then if the toolchain file detects that we're building a Qt repo (by
checking for the presence of QT_REPO_MODULE_VERSION) set
CMAKE_OSX_ARCHITECTURES to QT_OSX_ARCHITECTURES to propagate the
initial list of arches.
For user projects we want to have some sensible defaults.
For macOS projects, leave the decision of the architecture to build
to CMake.
For iOS Xcode projects, leave the decision to Xcode.
For iOS Ninja projects, set the architecture to the first value of the
architectures used when configuring Qt.
As a side note this fixes an issue in our CI where we configured macOS
Qt with 2 architectures and then tried to run CMake build tests for
both architectures on a machine that doesn't have the universal SDK.
This led to build failures.
Because the CMake build tests act as regular user projects, now they
are configured with a single architecture that is automtically
detected by CMake.
Pick-to: 6.1
Task-number: QTBUG-85447
Change-Id: Id1b7e78d7e67c1796efed10751416e5f857c16d2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The CoreMotion is required by the QtSensor module.
Task-number: QTBUG-92502
Change-Id: I7f1853131aa96b2cb052862d5bf492df5ec18150
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The 'list(TRANSFORM cmake_args REPLACE "\\[\\[;\\]\\]" "\\\\;")' call
breaks the list arguments added when evaluating the 'INPUT_' values.
Therefore, it's necessary to apply bracket-based escaping to all list
arguments instead of the standard escaping.
Amends 856fadf85c
Fixes: QTBUG-92459
Change-Id: Ifd4e0ca5f549a1c7fab9ceb587ed355250c4e677
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Expand the condition without an extra negation.
This fixes incorrect condition evaluation for conditions not enclosed
in parenthesis.
Pick-to: 6.1
Change-Id: I4923059b6b199676058091c23d51c9368daaebd0
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously the plugin .pri files that CMake generated for qmake
consumption contained an '-' to exclude the plugin from
auto-importing only if the plugin type was generic or a platform
plugin.
Now that plugin projects that should be excluded have a proper
DEFAULT_IF FALSE
clause, we can simply query for the defaultness of the plugin
to know whether to exclude it in the generated .pri file.
This fixes an issue with Qt static builds and qtvirtualkeyboard.
The vkb plugin was not excluded and thus any simple QtGui app
linked to the vkb plugin in a static qmake project. This led to linker
issues because the vkb plugin also depends on a vkb quick plugin which
is not listed as a dependency.
Augments 76230d9879
Amends c975c35eae
Pick-to: 6.1 6.1.0
Fixes: QTBUG-92529
Task-number: QTBUG-87861
Change-Id: I9671f6504374cf0799289bbe19110e01c129402e
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qt_internal_add_executable has some special logic to link static
plugins in order to avoid issues with link cycles on exported
Qt module targets. This logic does not take into account if a plugin
is a default plugin.
On windows this caused duplicate symbol linking issues in static super
builds, because both qwindows and qdirect2d define a subset of
the same symbols.
Make sure to only link to default static plugins.
This will skip linking to qdirect2d because it's not a default qpa
plugin and thus avoid linker issues.
Amends 5807e1ae81
Pick-to: 6.1 6.1.0
Fixes: QTBUG-92451
Change-Id: I56df2ce0201625088417de53038642518c1d3bbd
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake 3.20.0 can create autogen-related cyclic dependencies that are
only detected at build time by Ninja, which then fails with a build error.
Warn and advise to use a different CMake version instead.
Pick-to: 6.1 6.0
Change-Id: I9bef973ad2efdb69f28d6a9e0584b543be59f17f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Plugin meta-sets are not visible outside of the module build tree, so
there is no point in adding dependencies for externally added plugins.
Change-Id: Ica5b29b57c032f4fc9b128172aaa806392e9e581
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QT_TESTCASE_BUILDDIR was implicitly defined by Qt::Test target for
library users in Qt5. By default, this definition will point to
CMAKE_CURRENT_BINARY_DIR. This logic works similarly to qmake logic.
From user's perspective it might be useful to not rely on standard
search paths, but specify own. This can be done by setting the
QT_TESTCASE_BUILDDIR property for the user's target. CMake will
substute the value of the QT_TESTCASE_BUILDDIR property into the
QT_TESTCASE_BUILDDIR definition.
The implicit QT_TESTCASE_SOURCEDIR also seems to be useful. According
to the current logic, it points to CMAKE_CURRENT_SOURCE_DIR.
Fixes: QTBUG-92079
Change-Id: I8a9065f08e859c713b3c8cc08142a9ced0677770
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The generated object resource library depends on the Qt::Core library
because uses the functions defined in qresource.cpp. Dummy linking of
the Qt::Core to an object library has an effect only when the object
library is linked directly to the executable as a target. If we link
the object library as INTERFACE library we miss out all the objects
that need to be linked to the executable. This behavior is explained
here:
https://bit.ly/3sFWKvI
Thus, the only option to link the object library objects to the
endpoint executable is to use TARGET_OBJECTS property in genex, as
it's already done. But that means we are losing all profits that
target actually has, especially linking the object library dependencies.
The combination of both of the above methods does the job. The only
thing that looks fragile so far is order. Currently, the order we
use in the target_link_library call applies to the linker command line.
This means the object library objects must always appear before the
object library target.
Change-Id: If1f0e35e0445d5e96a1f2249ab44114cd36630e9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Plugin targets don't fit the requirements of the module but use
the function associated to the module. The purpose of using
qt_internal_module_info is to get the path to the top-level include
directory. So there is no point in breaking the encapsulation rules
to get a well-known directory.
Change-Id: If3d2a31d4ec186929e3d662a79a1ae9eac988d1a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add new configure option -make minimal-static-tests and CMake option
QT_BUILD_MINIMAL_STATIC_TESTS. In conjunction with QT_BUILD_TESTS
it will enable building a minimal subset of tests when targeting
a static desktop Qt build.
In qtbase the minimal subset includes all the auto tests of testlib,
tools, corelib and cmake. In particular this will also do cmake build
tests and qmake build tests (tst_qmake)
Adjust CI instructions to enable building a minimal subset of static
tests when a platform configuration is tagged with the
MinimalStaticTests feature.
Fix and skip a few tests that were failing.
Pick-to: 6.1
Task-number: QTBUG-87580
Task-number: QTBUG-91869
Change-Id: I1fc311b8d5e743ccf05047fb9a7fdb813a645206
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Use the same approach we use for iOS, which is to set multiple
CMAKE_OSX_ARCHITECTURES values and let the clang front end
deal with lipo-ing the final libraries.
For now, Qt can be configured to build universal macOS libraries by
passing 2 architectures to CMake, either via:
-DCMAKE_OSX_ARCHITECTURES="x86_64;arm64"
or
-DCMAKE_OSX_ARCHITECTURES="arm64;x86_64"
Currently we recommend specifying the intel x86_64 arch as the first
one, to get an intel slice configuration that is comparable to a
non-universal intel build.
Specifying the arm64 slice first could pessimize optimizations and
reduce the feature set for the intel slice due to the limitation
that we run configure tests only once.
The first specified architecture is the one used to do all the
configure tests.
It 'mostly' defines the common feature set of both architecture
slices, with the excepion of some special handling for sse2 and
neon instructions.
In the future we might want to run at least the Qt architecture config
test for all specified architectures, so that we can extract all the
supported sub-arches and instruction sets in a reliable way.
For now, we use the same sse2 hack as for iOS simulator_and_device
builds, otherwise QtGui fails to link due to missing
qt_memfill32_sse2 and other symbols.
The hack is somewhat augmented to ensure that reconfiguration
still succeeds (same issue happened with iOS). Previously the sse2
feature condition was broken due to force setting the feature
to be ON. Now the condition also checks for a special
QT_FORCE_FEATURE_sse2 variable which we set internally.
Note that we shouldn't build for arm64e, because the binaries
get killed when running on AS with the following message:
kernel: exec_mach_imgact: not running binary built against
preview arm64e ABI.
Aslo, by default, we disable the arm64 slice for qt sql plugins,
mostly because the CI provisioned sql libraries that we depend on only
contain x86_64 slices, and trying to build the sql plugins for both
slices will fail with linker errors.
This behavior can be disabled for all targets marked by
qt_internal_force_macos_intel_arch, by setting the
QT_FORCE_MACOS_ALL_ARCHES CMake option to ON.
To disble it per-target one can set
QT_FORCE_MACOS_ALL_ARCHES_${target} to ON.
Task-number: QTBUG-85447
Change-Id: Iccb5dfcc1a21a8a8292bd3817df0ea46c3445f75
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
qt_internal_add_simd can now take an EXCLUDE_OSX_ARCHITECTURES list of
values which specifies for which architectures the simd compile flags
should not be added.
This is relevant for macOS universal builds.
Example
CMAKE_OSX_ARCHITECTURES is "x86_64;arm64"
EXCLUDE_OSX_ARCHITECTURES is "arm64"
SIMD is avx2
the final compiler flags that will be added are "-Xarch_x86_64 -mavx2"
Slightly, clean up the function implementation and document its
arguments.
NAME handling has been removed because it's dead code that hasn't been
removed as part of 1b7008a3d7.
Task-number: QTBUG-85447
Change-Id: I395c19bdd67219bebb6b5b8d9f418b6e6488e09b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
A few configure defines get changed:
QMAKE_WASM_PTHREAD_POOL_SIZE is now QT_WASM_PTHREAD_POOL_SIZE
QMAKE_WASM_TOTAL_MEMORY is now QT_WASM_INITIAL_MEMORY
QMAKE_WASM_SOURCE_MAP_BASE is now QT_WASM_SOURCE_MAP_BASE
device-option EMSCRIPTEN_ASYNCIFY=1 is QT_EMSCRIPTEN_ASYNCIFY=1
To create source maps for debugging. use
device-option QT_WASM_SOURCE_MAP=1
Task-number: QTBUG-78647
Change-Id: If9f30cd7fb408c386d6d69b5f7b1beecf1ab44b5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Whenever something went wrong with building the arch test or extracting
info from it, the failure messages lacked useful details.
It's especially hard to figure out what went wrong if the failure
happened in the CI.
Print a bunch of useful information in case of failure.
Change-Id: Iafe287f951880c1441e57924ae372d6a9029a9a7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
On Windows, we need to strip drive letter and colon before prepending
DESTDIR when creating our versioned hard links.
This fixes CI submodule updates.
Change-Id: I41bc5f27b714ef74d3fadc4a0fb16c3d8b20da1a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
(cherry picked from commit 88886f193230292f38987ac4f1503753f50786f0)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
qt3d/9a473a3c9b246f4895ae73d7060745b8b199a6c5 introduced a find_package
call in a configure.cmake file, very subtly breaking top-level builds
with configure.
The find_package call results in errors of the cmake call that runs
QtProcessConfigureArgs.cmake (see bug report for details).
Create a find_package stub that errors out with a helpful message.
Task-number: QTBUG-92163
Change-Id: I06db0bf219b965e93b78c690e9f7ad868196ddb9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake 3.19 removed the restrictions on allowable names for properties
on INTERFACE targets. With earlier CMake versions (back to CMake 3.11),
names for custom properties must begin with either a lowercase letter
or an underscore.
In 5807e1ae81 (Add plugins to Qt tools and executables for static
builds, 2021-03-19), the names QT_REPO_PLUGIN_CLASS_NAMES and
QT_REPO_PLUGINS were used, but in some cases, the targets on which they
were being set are INTERFACE targets. Replace these with names that
are supported with CMake 3.11 or later.
Amends 5807e1ae81
Task-number: QTBUG-91915
Pick-to: 6.1
Change-Id: Ife702a1fb339b190d46a8dafb380253219199ba6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In the recent refactoring of qt_internal_add_plugin, a new target
existence check was added when associating a plugin with a qt module.
That check didn't account for a qualified qt module target name.
This failed configuration of qtsvg which checked for the existence of
a namespace-less 'Gui' in a per-repo build.
Make sure to prepend the Qt namespace to the qt module name and also
handle aliased target names.
As a drive-by, add a TODO item to figure out how to link executables
to plugins who's plugin type belong to a different repo, but both the
executable and plugin are built in the current repo.
Amends aa4a1006cb
Fixes: QTBUG-92235
Change-Id: I1c0f83672ab00f4702be9bad9a66ccc35e82f5c8
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
(cherry picked from commit 734d2cdbc4ff6db6b3df8fffbb23dbbb565c076b)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
list(TRANSFORM ...) unexpectedly removes semicolon escaping in list
items. So the list arguments seems to be broken. The 'bracket argument'
suppresses this behavior. Right before forwarding command line
arguments to the cmake call, 'bracket arguments'are replaced by escaped
semicolons back.
Recent fix escapes all semicolons of the 'configure_args' and glues
all arguments to a single 'list'.
Amends df8e1c8e58
Change-Id: I4a458b9e3add307b36924c4c7c7f739d348f9343
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If SKIP_INSTALL option is specified for the qt_internal_add_plugin
function the install_directory variable become empty and finalizer unable
to call qt_finalize_plugin, because of lack of the second argument. It
makes sense to use the INSTALL_PATH single argument instead.
Change-Id: I2d4b40c8cf812a834c0e045569b45a649d339508
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Remove code duplication by calling qt6_add_plugin() from
qt_internal_add_plugin().
Separate out the public and internal arguments for the
variables defined in QtBuild.cmake for these functions.
Provide them via commands instead for greater robustness.
This separation allows other Qt repos to access the appropriate
set of keywords where they define commands that forward
on to *_add_plugin() in their implementations. Retain
the old variables for now to simplify the integration
steps for updating other repos. The old variables can
be removed once there are no more references left to
them in any repo.
Task-number: QTBUG-88763
Pick-to: 6.1
Change-Id: I0105523afd95995923bd20fc963d245bbb15d34d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building and installing a Qt repo that provides plugins for a Qt
module within a different repository (for example, qtimageformats
providing imageformat plugins for QtGui), re-configuring that repository
would result in configuration errors like
"add_library cannot create ALIAS target "Qt6::QTgaPlugin" because
another target with the same name already exists."
This happened, because the find_package(Qt6 COMPONENTS Gui) calls pulled
in the Qt6*PluginConfig.cmake files that create imported targets for the
plugins we want to build.
To fix this, when building Qt, we now load only plugins that are
provided by repositories the currently building repository depends on.
We read the repo dependencies from dependencies.yaml when the
Qt6BuildInternals package is loaded, but only in static builds and only
if we're currently building a Qt repository.
To find out whether we're building a Qt repository, we check whether
QT_REPO_MODULE_VERSION is defined. We cannot check QT_BUILDING_QT,
because that variable is not available for the first find_package calls
in the repository's top-level project file.
In each Qt6*PluginConfig.cmake file, we bail out if the plugin's
repository is not one of the ones in QT_REPO_DEPENDENCIES.
Fixes: QTBUG-86670
Fixes: QTBUG-91887
Change-Id: I8f6c8398032227032742f1ca019e983ff2bcd745
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add the option argument INSTALL_VERSIONED_LINK to qt_internal_add_tool
and qt_internal_add_app. For tools/apps with this argument we create an
install rule that creates a versioned hard link. For example, for
bin/qmake we create bin/qmake6.
Note that this only applies to prefix builds.
Apply this argument to qmake.
The qt_internal_add_app change is necessary for qtdiag and in qttools.
Task-number: QTBUG-89170
Change-Id: Id32d6055544c475166f4d854aaeb6292fbb5fbb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
(cherry picked from commit c19d957f45fa27f61b5ecc566f8dbc19f12a44c3)
In the CI on a windows we configure Qt with the following prefix
-DCMAKE_INSTALL_PREFIX:PATH=\Users\qt\work\install
Note the lack of the drive letter.
This is intentional, so that we can abuse CMake's DESTDIR installation
mechanism to install into a custom path.
This causes trouble for static Qt builds in the CI.
Specifically when there is no qt.conf file next to qmake, qmake -query
will report a
QT_INSTALL_PREFIX:/Users/qt/work/install
and ultimately qmake will fail to locate the module .pri files in such
a path, showing errors like:
Project ERROR: Unknown module(s) in QT: core gui?
If a qt.conf is placed next to qmake (even an empty one), a differenct
code path is used in qmake to resolve the prefix, which returns a path
with a drive letter.
In a shared build, because the 'relocatable' feature is enabled by
default, a different code path is used and thus the prefix is
also successfully resolved.
So the problem is specific to static Windows Qt builds that have no
qt.conf file next to qmake.
This is the exact scenario that we encounter when running static
Qt tests (tst_qmake in particular).
To circumvent the issue, prepend a drive letter to the prefix
hardcoded into qconfig.cpp. Do that with
get_filename_component(REALPATH) which apparently resolves
to a fully qualified path.
Pick-to: 6.1
Task-number: QTBUG-87580
Change-Id: I17c885f29bfdee45bec1d6aac7c3b26723e761a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The code was added as part of
a6ccef651d
but the important bits were removed as part of
c431e2d33c
Change-Id: I6ba7bffa2bfdbeae2c92cd9ffeaa5f31771eedde
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Passing e.g. -- -DQT_BUILD_SUBMODULES="qtbase;qtdeclarative" to
configure would fail because the module list was not preserved
as a single argument.
Change-Id: If685d0d541201597a2c2a5dc3d55b5d1ae51da22
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In static builds, we cannot allow any part of the main build to make a
call to find_package(Qt6...) where such a call may load a
Qt6*Plugins.cmake file. That would add additional dependencies to the
main module targets, setting up a circular dependency in the set of
*Config.cmake files which cannot be resolved. This scenario would be
triggered by per-repo builds or user projects.
But Qt's tools and other executables still need to load some plugins
in static builds. Sometimes a platform plugin may be enough, other
times we may want all supportable plugins (e.g. Qt Designer).
Therefore, add all plugins we can identify as relevant for an
executable that is part of the Qt build, but add them directly to the
executable without affecting the linking relationships between the
main module libraries.
Also remove the now unnecessary check for QT_BUILD_PROJECT_NAME in
top level builds because there should be no difference between per-repo
and top level builds any more (as far as linking static plugins is
concerned).
Examples that build as part of the main build will still build
successfully after this change, but they will not run if they require
a platform plugin. Examples need to be moved out to a separate build
where they can call find_package(Qt6) without QT_NO_CREATE_TARGETS
set to TRUE to be runnable (see QTBUG-90820).
Fixes: QTBUG-91915
Pick-to: 6.1
Change-Id: I8088baddb54e394ca111b103313596d6743570ba
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
On BSD systems backtrace lies in libexecinfo. Use
FindBacktrace from CMake to be able to resolve
backtrace on more unixes than linux.
Change-Id: Ie14fd1727d2da03645fc2d6de10c0217baabad6b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The $<NOT:...> genex already guarantees to return a value of 0 or 1,
so there's no need to wrap it with $<BOOL:...>.
Pick-to: 6.0 6.1
Change-Id: Iff4ad64ed8deaa846e1b5bc22d2e5d9dbcd77cc7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Using CMAKE_C_COMPILER to match the compiler
has its drawbacks. CMAKE_C_COMPILER can include
the whole path to the compiler and directory
names that incude icc, icl or qcc also match
even if the compiler is not icc or qcc.
Icc has the compiler id Intel according to
the CMake documentation.
The compiler id for qcc is QCC according to
CMake policy 0047, and this is set to new since
Qt requires CMake to be above 3.0.
Change-Id: Iceb428ed10f0f5bbaa19ec2d883da186c85e7a73
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Set QT_DEFAULT_MKSPEC for various bsd systems, this is needed to
find qplatformdefs.h when compiling.
Change-Id: I9450193b737930548f32c87be3525c5ecd1e0e13
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In particular that influences BundledLibrary targets.
Most internal targets already depended transitively on Qt::Platform
via Qt::Core as a public dependency. This was not the case for
BundledLibrary targets which don't link to Qt::Core.
This led to compilation issues in user projects when targeting
WebAssembly, due to mismatched flags between a bundled Harfbuzz vs
a user project. Probably other subtle issues as well (e.g. none of the
Windows specific compile definitions were passed to bundled libs).
Bundled libraries depend on PlatformCommonInternal already, so make
PlatformCommonInternal turn depend on the public Platform target.
I thought that was already the case, but we merely relied on the
Qt::Core dependency.
Note that Qt::Core should still list Platform as a public dependency,
so it gets propagated to user projects.
Amends acf9b3a68b
Change-Id: Ida3b219818f89ec6eba2c2d92c5db65ad56bc5a4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A call to file(WRITE) will unconditionally update the file's timestamp
even if the file's contents don't change. The *Plugin.cpp file was
being written using configure_file() which avoids that, but the .cpp.in
file it was configuring from was being written out using file(WRITE)
every time CMake ran. Autogen saw that file as a dependency and then
regenerated the mocs_compilation.cpp file, which in turn results in
unnecessary rebuilds and relinking when nothing is actually changing.
The file(WRITE) - configure_file() dance is no longer needed anyway,
since the generated *Plugin.cpp file is very simple with no
substitutions required. Therefore, we can simplify that file's
generation with a single file(WRITE) that only executes if the file
contents will change or the file is missing.
Pick-to: 6.1 6.0
Change-Id: I2b7d1ff678b85ea7811969d656555592c9b6865f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When configuring a benchmark using the standalone-test script the
'benchmark' target is not available, causing a configure error.
Pick-to: 6.1 6.0
Change-Id: I8e480c9e72b47783c0910428187f0092049e89db
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In shadow per-repo builds we never hit the code that is supposed to
install cmake/Find*.cmake files. This caused problems when statically
building a Qt repo like qtshadertools against qtimageformats which
provides such Find*.cmake files.
Fixes: QTBUG-91538
Change-Id: I1147daee817ac71303d93e8bf368b2769afb0bb4
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The change "Enable X11 on other platforms than just Linux"
uses qt_set01 in a configure.cmake file but does not add it
to the stubs list in QtProcessConfigureArgs.cmake thus
breaking builds based on configure.
Add a defstub with qt_set01 to fix this.
Change-Id: Ia3e0ec61df5228f88f77f631968f6f96d567ec8e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
androiddeployqt relies on *-android-dependencies.xml files to know
what dependencies like jar files and permissions a Qt module requires.
CMake create those files under Qt prefix's lib dir but CMake was not
accounting for module plugins.
Fixes: QTBUG-90812
Pick-to: 6.1 6.0
Change-Id: Ib3b2e2bb237159b4851ac0f23dc75f8e56af3f7a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
