Remove the compare method in the QVariant::Handler struct. Rely
on the generic support provided by QMetaType instead.
[ChangeLog][Important Behavior Changes][QVariant] QVariant will now use builtin support in
QMetaType to compare its content. This implies a behavioral change
for some graphical types like QPixmap, QImage and QIcon that will
never compare equal in Qt 6 (as they do not have a comparison
operator).
Change-Id: I30a6e7116c89124d11ed9052537cecc23f78116e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: Ibdc95e9af7bd456a94ecfffd16066c47ea9766d0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtCore][QJsonDocument] Fixed a bug that caused
QJsonDocument's equality operator to crash if one of the operands was
default-constructed and the other wasn't.
Pick-to: 5.15
Fixes: QTBUG-85969
Change-Id: I5e00996d7f4b4a10bc98fffd1629f835f570ef6b
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Use the actual minimum value, rather than minus the maximum, and adapt
the overflow expectations so that they're correct west of Greenwich as
well as east.
Change-Id: I7a5f4510db0fdea3855b5b2bd4c4a86882030efd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Due to a limitation of mktime(), we would have declared it invalid.
Tidied up qt_mktime() slightly in the process.
Change-Id: I25469e314afee6e0394e564bc69a98883005d4ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Removed isCompressed(), deprecated since 5.15, and (since 5.13)
addSearchPath() and searchPath().
Change-Id: I4b6fb8077c02bbe322334e474eaf0a2a7caf0004
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QString's fromUtf16() prefers char16_t data over ushort.
Change-Id: Ib20c5afa09ceabb4e91fe434b6a057edb4739a53
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
mkspecs/features/qt.prf adds a dependency on the system threading
library if the Qt Core thread feature is enabled. Because qt.prf is
loaded by any public or internal Qt project, it's essentially a public
dependency for any Qt consumer.
To mimic that in CMake, we check if the thread feature is enabled, and
and set the Threads::Threads library as a dependency of Qt6::Platform,
which is a public target used by all Qt modules and plugins and Qt
consumers.
We also need to create a Qt6Dependencies.cmake file so we
find_package(Threads) every time find_package(Qt6) is called.
For the .prl files to be usable, we have to filter out some
CMake implementation specific directory separator tokens
'CMAKE_DIRECTORY_ID_SEP' aka '::@', which are added because we call
target_link_libraries() with a target created in a different scope
(I think).
As a result of this change, we shouldn't have to hardcode
Threads::Threads in other projects, because it's now a global public
dependency.
Task-number: QTBUG-85801
Task-number: QTBUG-85877
Change-Id: Ib5d662c43b28e63f7da49d3bd77d0ad751220b31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Receiving an rvalue still requires to check whether the parameter
is detached, otherwise we can't steal its backing std::map.
Change-Id: Ie88dbf39fd777112ad7bb20a46d5c2d65be8eb3d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... and QMultiMap as std::multimap.
Just use the implementation from the STL; we can't really claim that
our code is much better than STL's, or does things any differently
(de facto they're both red-black trees).
Decouple QMultiMap from QMap, by making it NOT inherit from
QMap any longer. This completes the deprecation started in 5.15:
QMap now does not store duplicated keys any more.
Something to establish is where to put the
QExplictlySharedDataPointer replcement that is in there as an
ad-hoc solution. There's a number of patches in-flight by Marc
that try to introduce the same (or very similar) functionality.
Miscellanea changes to the Q(Multi)Map code itself:
* consistently use size_type instead of int;
* pass iterators by value;
* drop QT_STRICT_ITERATORS;
* iterators implictly convert to const_iterators, and APIs
take const_iterators;
* iterators are just bidirectional and not random access;
* added noexcept where it makes sense;
* "inline" dropped (churn);
* qMapLessThanKey dropped (undocumented, 0 hits in Qt, 1 hit in KDE);
* operator== on Q(Multi)Map requires operator== on the key type
(we're checking for equality, not equivalence!).
Very few breakages occur in qtbase.
[ChangeLog][Potentially Source-Incompatible Changes] QMap does not
support multiple equivalent keys any more. Any related functionality
has been removed from QMap, following the deprecation that happened
in Qt 5.15. Use QMultiMap for this use case.
[ChangeLog][Potentially Source-Incompatible Changes] QMap and
QMultiMap iterators random-access API have been removed. Note that
the iterators have always been just bidirectional; moving
an iterator by N positions can still be achieved using std::next
or std::advance, at the same cost as before (O(N)).
[ChangeLog][Potentially Source-Incompatible Changes] QMultiMap does
not inherit from QMap any more. Amongst other things, this means
that iterators on a QMultiMap now belong to the QMultiMap class
(and not to the QMap class); new Java iterators have been added.
Change-Id: I5a0fe9b020f92c21b37065a1defff783b5d2b7a9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Avoids the conversion from UTF-8 for uses that are not dumping a string.
Mass conversion of Qt sources left for future opportunity.
Fixes: QTBUG-85811
Change-Id: I4ca4a35b687b46c39030fffd1626ae6c3294cacf
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We can end up in a situation where a (soon to be destroyed) observer is
owned by a binding which is about to be deleted. If in that situation
the binding is destroyed first, we end up with a dangling pointer
and ensuing memory corruption. Instead, we now first transfer the
ownership of the observer and only destroy the binding afterwards.
Fixes: QTBUG-85824
Change-Id: I721c0319281ada981ae7896bd2e02e9a0cc901b8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Fixes warning by Clang:
warning: 'const volatile' type qualifiers on return type have no effect
[-Wignored-qualifiers]
const volatile unsigned long long * const volatile func_KVPKVull() {...}
^~~~~~~~~~~~~~~
Change-Id: Ia4aae6521c84f4a18d92ad5035af5b247d283140
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Made QPromise::swap public, added free standing swap() for
QFutureInterface and QPromise. Updated QPromise special member
functions. Extended tests
Task-number: QTBUG-84977
Change-Id: I5daf6876df306d082441dbcdf5ae4dee3bfc0ead
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
We already had append(const QList &) and now there's an overload
taking an rvalue reference.
Change-Id: Id2fbc6c57badebebeee7b80d15bb333270fa4e19
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I don't know why std::shared_ptr allows this, but why not.
[ChangeLog][Important Behavior Changes] QSharedPointer objects will now
call custom deleters even when the pointer being tracked was null. This
behavior is the same as std::shared_ptr.
Fixes: QTBUG-85285
Pick-to: 5.15
Change-Id: I24006db8360041f598c5fffd161c260df0313b55
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
‘t’
Specifies that the argument is a ‘ptrdiff_t’.
This modifier was introduced in ISO C99.
We use qsizetype, which is the same width as ptrdiff_t, so it makes no
difference in va_arg().
Change-Id: Iea47e0f8fc8b40378df7fffd16255730109413a5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Deprecated in 5.15 in favor of CBOR.
Fixes: QTBUG-81239
Change-Id: I711d4bd7dd1247f58e77ac9fa53304cbe5028918
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Our hardware optimized conversions of float to qfloat16 rounds to even
where our table based conversion truncated to zero.
The rounding is not in this patch exactly round to even like the
hardware implementation but much closer.
Change-Id: I4c5e72c15fef9079d3660680b2727ff7ba4e768a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
BLAKE2 does not specify requirements about specific hash sizes and
since QCryptographicHash does not support dynamic hash sizes, only the
most common hash sizes could be covered by this.
The supported hash sizes were chosen to match the ones supported by the
Linux kernel.
The new hashing algorithms for QCryptographicHash are:
* BLAKE2b (160 bit, 256 bit, 384 bit, 512 bit)
* BLAKE2s (128 bit, 160 bit, 224 bit, 256 bit)
[ChangeLog][QtCore][QCryptographicHash] Added BLAKE2b and BLAKE2s
hashing algorithms.
Fixes: QTBUG-78198
Change-Id: Id9e0180a974093982fdf1cdd6180988a2e5e9f4f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We already have the information in the QMetaTypeInterface, and provide
functions to access sizeof. Adding alignof support seems natural, and
should make it easier to handle over-aligned types.
This should also be helpful in QVariant.
Change-Id: I166be76f4b7d2d2e524a3a1e513bd2f361e887c1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The tests are testing deprecated functionality, which we
still want to test.
Change-Id: Iad6ed35800896170c17fe019c7a6ecda22398ac3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Infinite is only when the mantissa is 0, everything else is NaN.
std::isnormal returns false on zero.
Pick-to: 5.15
Change-Id: I897fc0dc3b8a9c557bb1922ea7ca8df501e91859
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since 5.14: intersect(), angle(). Also removed definition of M_2PI
from test, since its last use was in the tests being removed.
Change-Id: Ie3a12247e3760e8bfdd3a659cd06245c86b198c2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QUrl::fromEncodedComponent_helper() only existed to support some old
methods deprecated since 5.0, that I recently removed.
It was the only caller of qt_urlRecodeByteArray() aside from that
function's own autotest.
Both were private.
Task-number: QTBUG-85700
Change-Id: I5d09fd44e768847ce51a1ae7043150922cb5314c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
warning: comparison of integers of different signs: 'qsizetype' (aka 'long long') and 'unsigned long'
Change-Id: I03acb1f7aed782169a0a42cd8afc84b85991cd1e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
warning: format specifies type 'int' but the argument has type 'qsizetype' (aka 'long long')
Change-Id: I6099b53efecea46d191d5dc019c986f99e49c1f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Deprecated since 5.0. Renamed a function in a manual test that no
longer needs to say it's Qt5-specific.
Change-Id: I6f2159c702f389d378a0e4d86bd4fe633298b100
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The -arch_blank argument to lipo is no longer supported.
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I47efcb3633f23b7a18d66211bc16d5c9dbc067c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since 5.8: setHidden(), isHidden()
Part of the QCommandLineParser test also used setHidden().
Change-Id: I05a1c63ff3beb1167ed75632c1b71d7fff17f09e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Since 5.0: QUrl's image of the QUrlQuery API
Remove deprecation-suppression from tst_qurl.cpp, too.
Change-Id: Ide826283cb4e177fb34fb4080502f5a4620bd5d7
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Since 5.3 joining() and old Joining type
Replaced by JoiningType joiningType()
Change-Id: Iefee50aaf94cec6d67b5fc004b3e68357b2015c5
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This only arises when the system locale tells us to use its zero as
our zero digit, since no CLDR locale uses it by default. Adapt an
MS-specific QLocale::system() test to use Suzhou numbering, so as to
test this.
While updating the locale-restoration code to also restore the digits
being set in that test, add restore code for the long time format,
where previously only the short time format was restored. Add a
comment to make it less likely one of those shall be missed in future.
Fixes: QTBUG-85409
Change-Id: I343324bb563ee0e455dfe77d4825bf8c3082ca30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QEasingCurve has a richer variety of curves and curveShape was already
implemented by changing the easingCurve property.
[ChangeLog][QtCore][QTimeLine] Deprecated QTimeLine's curveShape
property in favor of the easingCurve property.
Pick-to: 5.15
Change-Id: I7261c0f24d7e02bc94624f0b74d699df62de1a52
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
For types that don't have an operator==(), always trigger the binding
and the changed notification.
Task-number: QTBUG-85578
Change-Id: I41374f6d13c88106f4de83864e82172f3a248150
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Smart pointers like QSharedPointer<T> do have a value_type, but their
equality does not depend on T being comparable. Therefore, instead of
simply checking for T::value_type, test for a few other container
requirements.
This also required to add an additional check for std::optional, as that
one has an unconstrained operator== on MSVC.
Change-Id: Iefd048f7aa360f4713ecd79f80acd7dae72ee18c
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Read three more values from CLDR and add a byte to the bit-fields at
the end of QLocaleData, indicating the three group sizes. This adds
three new parameters to various low-level formatting functions. At the
same time, rename ThousandsGroup to GroupDigits, more faithfully
expressing what this (internal) option means.
This replaces commit 27d1391280 with a
fuller implementation that handles digit-grouping in any of the ways
that CLDR supports. The formerly "Indian" formatting now also applies
to at least some locales for Bangladesh, Bhutan and Sri Lanka.
Fixed Costa Rica currency formatting test that wrongly put a separator
after the first digit; the locale (in common with several Spanish
locales) requires at least two digits before the first separator.
[ChangeLog][QtCore][Important Behavior Changes] Some locales require
more than one digit before the first grouping separator; others use
group sizes other than three. The latter was partially supported (only
for India) at 5.15 but is now systematically supported; the former is
now also supported.
Task-number: QTBUG-24301
Fixes: QTBUG-81050
Change-Id: I4ea4e331f3254d1f34801cddf51f3c65d3815573
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
During review of a refactor (coming shortly), Thiago wondered what the
magic numbers were. On closer examination, I concluded that they were
wrong and wrote some tests to prove it. This commit adds those tests;
replaces the misguided old code with something that passes them; and
documents the reasons for the various parts of its decisions.
In the process, tidy up QLocaleData::doubleToString() somewhat and
rename some of its variables to conform to Qt coding style.
Change-Id: Ibee43659b1bdb0707639cdb444cfe941c31d409f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
