Sometimes it is not desirable to include the libraries in the APK,
e.g. system and vendor apps could prefer having one set of libraries
installed on the device. If unbundled deployment is specified,
native libraries will not be included in the APK.
With unbundled deployment, optional arguments can be passed to
set the path to load the libraries on the device.
[ChangeLog][Android][Deployment Changes] Adds option for Unbundled
deployment, where native libraries are not packaged in the APK.
Task-number: QAA-771
Change-Id: Ica51ef83a24dad58c7586bf610a58abe21fc1100
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
When building Qt we want to use the highest available 'target' SDK
version. If the version of the available SDK is lower than the minimum
required 'target' SDK version, we need to throw an error.
Pick-to: 6.2 6.3
Fixes: QTBUG-99165
Task-number: QTBUG-98870
Change-Id: Ib75567a6f33ac6d23d9f79e8ed8535839c08b91d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
...if an Android platform < 10 is installed.
The existing platform detection code preferred android-9 over
android-31, because the sorting did not use natural comparison.
Natural comparison was added to CMake in version 3.18. We simulate this
feature for older CMake versions.
Pick-to: 6.2
Fixes: QTBUG-98726
Change-Id: Ib2eb87bd47220feb672275fa5203df4f2b6d7ca7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
To allow using Android 12 APIs.
Pick-to: 6.2 5.15
Change-Id: I5e9da66c84457888ec723125d16876891232a99b
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
By the time of Qt 6.2 release all new apps targeting Play store must
target API level 30 (Android 11) or above (starting in 08/2021 for
new apps and 11/2021 for existing apps' updates).
Pick-to: 6.2 5.15
Task-number: QTBUG-94451
Change-Id: Id7fa2fd62899a7259e365c917292c6c3ac0d2b0d
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
comply with the api version used by default with androiddeployqt and
in docs. Google play also requires api 29 as minimum.
Task-number: QTBUG-90943
Pick-to: 6.1 6.0
Change-Id: I05e2a90b4d7f2120b0198e3fb7b8b1b2398eba93
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
'QT_HOST_PATH' indicates that we use crosscompilation toolchain
to build project. In this case 'Qt6Config.cmake' loads
'Qt6HostInfoConfig.cmake' from host QT_HOST_PATH, that defines
correct paths to host tools.
Replace hardcoded paths for host tools by paths recorded
in Qt6HostInfoConfig.cmake.
Correct conditions for QT_HOST_PATH, evaluate it explicitly as
string, but not as boolean expression.
Fixes: QTBUG-86557
Pick-to: 6.0
Change-Id: Ib52bbd32478051d019a932dcb1f735e2d4aacfbf
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Refactor test adding procedure. It's expected that for each new
platform we prepare test executable and arguments first and then
pass them to common test adding section.
Rename '_qt_internal_wrap_test' to 'qt_internal_create_command_script'
Rework paramerters handling of 'qt_internal_create_command_script',
make them named.
Add 'qt_internal_create_test_script' to add tests and wrap them using
'qt_internal_create_command_script'.
Amends f19266bd02
Fixes: QTBUG-88053
Pick-to: 6.0
Change-Id: I812f4a295005bf3a85cdcb5b8c41180f8249dc96
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Android *.so files need to CXX visibility to default after
qt_set_common_target_properties() which was setting it to hidden.
Also, pass the correct androidtestrunner arguments for cmake check
target
Fixes: QTBUG-88228
Change-Id: Ia29cdc9e65153c9669f3ec06f74a46f8fcd8c507
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add qt6_android_get_sdk_build_tools_revision() function to get the
Android SDK build tools revision, the logic is moved from
QtPlatformAndroid to Qt6AndroidMacros. The update QtPlatformAndroid
header comments.
Task-number: QTBUG-85982
Change-Id: If3e5b46fa583f929a24794792c9d5a52beb83990
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make name format of QT_ANDROID_DEPLOYMENT_SETTINGS_FILE consistent with
qmake, that is android-${target}-deployment-settings.json.
Task-number: QTCREATORBUG-24678
Change-Id: I2bdb056cf7a82fd83aaf658f3a405a0c9ef05756
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make the use of ANDROID_SDK_ROOT consistent.
Task-number: QTCREATORBUG-24678
Change-Id: If967bdc4d252996098fa210cf38429fe075eacb1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
00a1e5da7e wrongfully added parts of
QtPlatformAndroid.cmake which were removed in
32121e9882. This removed the part in
question again
Change-Id: Ie18968e6a165f52c68f4941ced6add266985bc48
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
AndroidManifest.xml file and the Android plugin already has a way
to provide commandline-arguments to app with the tag
"android.app.arguments". This change allow to set it from qmake/cmake
and allow Qt Creator to use that.
Task-number: QTCREATORBUG-23712
Change-Id: I3e680f40fd36ba6aaac7f344fb9509d2c3360e74
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
To fix CMake Qt For Android projects to configure, we need to move
some functions from a private CMake API file only, to a public one.
Add Qt6AndroidMacros.cmake which will be loaded by Qt6Core package.
We'll have to decide how we proceed with Qt5AndroidSupport.cmake,
because that file automatically runs code when included in Qt5, and we
usually don't want to do it.
We'll also have to decide how to handle the define_property() calls
that are still left in the private QtPlatformAndroid.cmake file.
With this fix, Qt example CMake projects that use
add_qt_gui_executable should now be buildable. An APK can be created
with 'ninja apk'.
Unfortunately Qt Creator 4.13 does not currently seem to support
opening and building CMake Qt For Android projects properly.
While the build succeeds after fiddling with the Kit settings, the APK
deploy step fails to run (at least on my machine).
So the simplest way to run the built APK is to open the android-build
dir with Android Studio and launch the example application from there.
Task-number: QTBUG-85399
Change-Id: I77f246331de7a6e9e6d4ba7d973730190138f136
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Fix detection of qt android platform plugin by globbing inside
the install qt6 prefix location. This is just a sanity check.
Fix platform plugin detection for CMake standalone tests configured
using qt-cmake-standalone-test, which used to look into the fake
standalone prefix location instead of the real Qt location.
Fix detection of stdlib path using CMAKE_SYSROOT.
Add a global apk target that allows easier building of all apk targets
defined in the project. Creation of this target can be opted out by
setting QT_NO_GLOBAL_APK_TARGET to TRUE.
Amends b1f8ca8032.
Task-number: QTBUG-85399
Change-Id: Ic9c1646b4f00e0084fe3f4397df471b8f925afd8
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
First of all cmake and qmake used a different standard.
Secondly, the qmake logic enforced lvl 23 (if it was installed which
is the case on the failing machine). When this is combined with
f71a400bf6 which requires lvl 28 API to build, the android build fails to compile.
cmake logic was even worse as it enforced lvl 21 API to be used if installed.
This change requires pick to 5.15 as f71a400bf6 was picked as well.
Pick-to: 5.15
Change-Id: I89a7193b711b8bf927d02907343a49d6f27082ce
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Due to the wrong string comparison, we were writing out the wrong
architecture for the arm64 builds to the deployment settings json file.
This leads to androiddeployqt tool not being able to locate the
stdlibc++.
Change-Id: I3d13b14c27f043445bf46aaca0e9f862f6ca84e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch converts all add_executable calls when building for Android
to a module library and replaces the call to add_test() to use
the android testrunner binary.
Change-Id: I10ba5919217cdc93cc2cbbb7d13ad9d10fc5ac1a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch adds two custom targets to generate android apks. The
targets are named ${TARGET}_prepare_apk_dir and ${TARGET}_make_apk. The
first one insures the binary is copied to the right location and the
latter invokes androiddeployqt on the apk directory.
Change-Id: I8152cef387b50ec03ee2bfd92b56910a6f22754c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add support to pro2cmake to convert java code for android.
Add support to override API_LEVEL for the Android sdk jar file. If the
sdk is not found, we'll default to the one located by QT_ANDROID_JAR.
Change-Id: If0b746dc7f9148ac43e6592a4a4dd23d46bbd4cd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Override the default binary path for qmlimportscanner so that it points
to the host build specified via QT_HOST_PATH.
Change-Id: Ib0b47e61315c87ce6225e2d8ca84043cae03357d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Update Android build configuration to be compatible with the multi-arch
android build patch to qmake. We can now build and generate the apk
correctly. Executing on the device/simulator will only work once the
latest changes from 5.14 have been merged in.
We now replace target suffix with ${CMAKE_ANDROID_ARCH_ABI}.[so|a] so
we don't have to deal with handling targets which might have any of the
OUTPUT_NAME properties set.
The dependency and deploy settings generation has also been updated to
append the file contents to a string and then do a single file write
at the end.
Change-Id: Id3c5bd0428141ecaf962124a100390e3a4e41feb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add missing qml root path variable in the deployment configuration file.
Not having this variable will cause androiddeployqt not use the
qml dependency scanner to package all relevant dependencies.
This patch also fixes QT_ANDROID_BUNDLED_FILES files not being
processed.
Change-Id: I5bca33cdbb57098f283b38516b777571806da9e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Generate the ${MODULE}-android-dependencies.xml for the androiddeployqt
tool. This will ensure all the right plugins and dependencies are
packaged when generating the apk.
This change also changes the visibility for executable to default/public.
Not having this will cause the application to crash as we can't locate
main() in the executable (shared library).
Additionally pro2cmake conversion script has been updated to perform
the required conversions for the Android settings.
Finally, the 6 projects in QtBase that have Android dependencies have
been updated with the new script and the step that produces the xml
files in run at the end in QtPostProcess.cmake.
Change-Id: I9774ba1b123bc11cae972fa37054ef2c51988498
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
* Simplify add_qt_gui_executable() to not require WIN32/MACOSX_BUNDLE
but provide it implicitly. It's redundant :)
* When on Android, build a module (shared library), just like qmake.
This requires an additional library destination in the install() call,
but that's ignored on other platforms.
* Fix typos in the android deployment generation settings function
* Use the correct cache variable to determine whether we're inside a Qt
build or not. Right now this only works inside Qt builds anyway as
QtPlatformAndroid.cmake is not publically accessible.
Change-Id: If1c763c31a7a83d0e0d854362ba7901657f63eb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Generate the android deployment settings json for android apk
targets. QtPlatformAndroid is now also deployed as a public
build dependency of QtCore. Some minor refactoring has been
performed to the naming of variables and functions to
better match the public facing apis.
Extra settings for the file can be configured using the
following target properties:
set_target_properties(Core
PROPERTIES QT_ANDROID_DEPLOYMENT_DEPENDENCIES "foo;bar"
QT_ANDROID_EXTRA_LIBS "foo;bar"
QT_ANDROID_EXTRA_PLUGINS "foo;bar"
QT_ANDROID_PACKAGE_SOURCE_DIR "/foo/bar/"
)
The file is generated using the function
qt_android_generate_depoyment_settings().
We need to install the android template files and jar
files during the android build as the androiddeployqt tool
wont work if parts of it are split between the host
install and the android install.
Added QT_BUILD_QT variable to check whether we are building
Qt from source.
Finally, we also force the stdlib to shared via cmake
configuration with -DANDROID_STL="c++_shared"
Change-Id: I063c47e11749d56ba4c6f02101dbcc09e1b9fe87
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Enable building androiddeployqt when performing host builds only.
Added QtPlatformAndroid.cmake to locate Java and the setup the
android SDK platform when building on android.
Install the androiddeployqt support files when performing a host
build.
Added ANDROID_SDK_ROOT configuration variable for specifying the
android sdk directory.
Generating the deployment-settings.json will be done in another
change.
Change-Id: I1bf15315af4ed904d2fb1d22b0e8e834df32d6ed
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
