Whenever a regular QWidget contains a child render-to-texture widget
(like a QOpenGLWidget) that is opaque (attribute
Qt::WA_OpaquePaintEvent is set) and completely covers the parent
geometry, the child widget would not be shown.
This happens because QWidgetBackingStore::doSync contains a check to
see if an opaque child completely covers its parent, in which case it
does not draw the parent, and only draws the child.
This is an issue if the widget is actually a texture-based one, because
for it to be seen on screen, the parent widget has to be redrawn with a
proper blending mask, so that the rtt widget gets properly composed
into the place where the mask is.
The fix consists in keeping the parent widget being marked dirty, in case
it has an opaque texture-based child that completely covers it. This will
force a redraw of the parent widget with a proper blending mask.
Change-Id: If1feec04b86bff2c49158b8d72f175cec252dea1
Task-number: QTBUG-52123
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Blacklisting maskedUpdate() to get QtWayland in the CI
Task-number: QTBUG-51399
Change-Id: Iabe8db88c7e0b6138cbbf6acab0964d85fdd2c36
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
There is nothing guaranteeing there will be a paint request after
resizeViewportFramebuffer() is called. However we must not be left
with a framebuffer with uninitialized content. So trigger an update.
Include also a half-hearted autotest. QOpenGLWidget (or QGLWidget)
viewports have not been autotested at all. Try to verify that it
is functional at least, even if we cannot check the actual output.
Change-Id: I34d78fe32e94c39dad919216b5a4f4bb2aea3cc2
Task-number: QTBUG-52419
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
The test was half-ported from Qt 4 and #ifdefed out depending
on WINVER. When it became active, it failed since it queries the window
handle too early in the process.
Move the code sending the message into showEvent() to ensure a window
handle exists and parent the listview properly to prevent a leaking
toplevel.
Change-Id: I74aa9ddfd0e88dd31e9258400fc3e473b6e0d92e
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This has been fixed in 5.6.1 but we can afford the extra test
to guard against regressions.
The setup for this test is two menus, one parent of the other.
The submenu is tearable. We open the parent menu, open its
submenu and then move the mouse cursor straight over the
submenu's tear-off area. The submenu should stay open even
after a short delay.
Change-Id: Ia8ad326d78dde31b6dd91b0ebacf0db1898715d4
Task-number: QTBUG-53068
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
This patch reduces paint events by removing code which sets native
widgets dirty in QWidgetWindow::handleExposeEvent. Native widgets are
also marked dirty in QWidgetPrivate::drawWidget, so it is enough for
proper painting.
This restores Qt4 behavior when one resize means one repaint for native
widgets. Without this patch the native widget is marked as dirty on
every expose event, so one repaint is from syncBackingStore and second
(or more) is from marking the widget dirty explicitly.
This patch improves performance of native widgets and it also reduces
locks when paint event is v-synced, e.g. on OpenGL swap buffers or on
any other technology like VDPAU, VA-API, etc.
Added autotest for checking number of paint events for native widgets.
Task-number: QTBUG-50796
Change-Id: I4e1649069e2e73d15b038fd1834d0551915252ee
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QMenuBar now receives a parent changed event for each of its parent,
grand-parent, ... This fixes a crash caused by an invalid QWidget
pointer and makes sure the keyboard shortcuts events are relayed to the
menu bar in all parenting/re-parenting cases by installing an event
filter on each parent
Task-number: QTBUG-53205
Change-Id: I419e6cbc52e28a67fb08a848a7161b4cb8ae4ae5
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Replace the pointer member test widge by a widget
instiantiated on the stack where needed.
Remove empty functions.
Change-Id: Ie2da1d88bb23e56e85a2c57cc28220d74c63fae1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use one simple widget of a suitable size per-test instead, removing
the need to reset palettes and fonts and to hide and re-show the
widget.
Task-number: QTBUG-38858
Change-Id: I3096af91ba68e419ad7383e59bcc5838c2363e32
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Introduce a function going up the widget hierarchy determining a QTransform
for mapping the coordinates applying the transformations of any QGraphicsView
instances found. In mapFromGlobal(), use the inverse of it. This fixes the
case of widget hierarchies embedded into QGraphicsView with transformations.
Increase fuzz in the tests due to float rounding errors.
Task-number: QTBUG-41135
Task-number: QTBUG-50030
Task-number: QTBUG-50136
Task-number: QTBUG-52507
Change-Id: I507e0bccd546250fe9c2d1b74ef38657d61490b4
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The QFontDialog test will currently fail for some PCF bitmap fonts
because the list of smooth sizes it uses to populate its size list
contains unsupported sizes. We work around this by adding
QEXPECT_FAIL when we detect that the failure is going to happen.
Task-number: QTBUG-46056
Task-number: QTBUG-53299
Change-Id: Ia665cca220f3622405d1a2336e8d587545cccbc6
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Create parent nodes with the corresponding paths, not with
the absolute path of the child node. Otherwise we will get
incorrect QFileInfo at least in the following case:
QFileSystemModel model;
model.setRootPath("/usr/bin");
QModelIndex idx = model.setRootPath("/usr");
qDebug() << model.fileInfo(idx).absoluteFilePath();
Without the fix it prints "/usr/bin".
It's a regression triggered by 61cefb2f7a
(De-inline QFileSystemModel::fileInfo() and implement it efficiently).
Change-Id: I3b4e5f5b256711e27ad50824eaa8492dbc096808
Task-number: QTBUG-51586
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The test passes on OS X now.
Task-number: QTBUG-8941
Change-Id: I7b57dc30ede7c1ed0bcb8bacb458ea56f222d987
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Sheets are no longer transparent on newer OS X
versions.
Change-Id: Iaaed5aea9c9b130a5d991acd36717b76c3927cfb
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
The Qt 5 unified toolbar implementation does not move
the toolbar to the “non-client” area. This test is
no longer relevant.
Change-Id: Ia32de2260f8ef400a0dc5acf3e5e3ff59083657a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
On some X11 window managers, 2 events are received when
hiding/reshowing and activating the window, which became
apparent after 91f536dd71.
Change-Id: I66fdc4f69d87ac898b18d5dfddc957617bb8f916
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The old code sometimes made incorrect selections when rows or columns were
hidden or moved. It used logical top left and bottom right indexes to create a
selection rectangle. However on moved or hidden cells a wrong rectangle was
made. This fix calculates a simple rectangle without hidden cells and makes use
of the row/column select functionality provided by the selection model, to make
the right selection.
[ChangeLog][QtWidgets][QTableView] Fixed a selection bug when rows or columns were hidden (QTBUG-50171)
Task-number: QTBUG-50171
Change-Id: Id186012af26da7b2051ff5eb1c13e6b7494cca77
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This patch QSKIPs all tests that:
- take to much time sitting in some QTRY_VERIFY or similar before failing
- result in 'not in fullscreen mode' warning (with PASS) - thus completely flaky.
- Where previously determined to not apply to OS X using QT_OS_MAC
The intent is to make the test run-time more reasonable,
both when running the test locally and on the CI system.
Reduce the BLACKLIST - to avoid a 'double elimination' the tests that are skipped now,
should not be BLACKLISTed so that we fix them for good.
Task-number: QTBUG-52974
Change-Id: I34dc2010d0debc6b5b99f2375a6da902b7a17b29
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Q_OS_DARWIN is the general replacement for Q_OS_MAC,
but most/all of the MAC sections in this test are
OS X specific.
Change-Id: Ic54af9d3dce1e1952a57e15b74acdedf2af60c79
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Fix regression in a7b0cb467c which caused
it to be hard to start scrolling at the ends of a scroll-view if using
fine grained scrolling events.
Change-Id: I55f3210150b993281545c3ad5a7356d892fa30b5
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The widget is hidden, reshown and tested for active window, which
is flaky. Add a call to activateWindow() which increases
the chances of it becoming the active window should another window
appear.
Change-Id: Ibbecdbc43e2ac9638aec497c47fffaaffa1855af
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Pushing the mouse rapidly to the top left corner causes KDE / KWin to
switch to "Present all Windows" (Ctrl+F9) mode, showing all windows.
This has been observed to be triggered programmatically by
QCursor::setPos(0, 0) if there is no other window beneath and apparently
depending on the perceived mouse "speed".
Suppress this by using the bottom right corner for XCB.
Change-Id: Id18d2f45a095ed4d4f365f010cf45a20b0d9435e
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Use the correct parent path for the renamed file when creating
QFileInfo. It must be a path to the parent directory, not to the
root directory of the model.
Modify tst_QFileSystemModel::setData() to test renames in subdirs
of the root directory of the model.
Change-Id: I69d9e3a937616857a81617791ed118af3f6eea05
Task-number: QTBUG-52561
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Return pixmaps with device pixel ratio similar to QScreen::grabWindow(),
cf c0963486ce.
Adapt kernel tests accordingly.
Task-number: QTBUG-52137
Change-Id: I9ce276d5e2d87ae0d39c8639267d1ac283fed854
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The old code incorrectly calculated visual region for a selection (specified by
QItemSelection object) in case of reordered / swapped rows or columns. It used
the leftmost and rightmost (upmost and downmost for vertical mode) logical
indexes directly. However some middle logical index (in case of reorder) may be
the leftmost or rightmost visual index. In such cases the repainting didn't
work properly. This fix first checks whether reordering / swapping is in use.
If it isn't (ie visual=logical) we use code similar to the old code. Otherwise
the new code scans all selected logical indexes, translates them into visual
ones and gets the correct leftmost and rightmost indexes.
[ChangeLog][QtWidgets][QHeaderView] Fixed a repainting issue when items had been reordered.
Task-number: QTBUG-50171
Change-Id: If6afabebf445cf32a8e0afe262b6ee149e7c4b2b
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Removes spacing in QGridLayout when the QWidgets inside of the QGridLayout
are hidden, by checking if the sibling is empty, thus duplicate
spacing can be avoided.
Task-number: QTBUG-52357
Change-Id: I45475e7b264f94ef3bec5f9a4b8cbaa1d53ec6dd
Reviewed-by: Karim Pinter <karim.pinter@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Blacklisting those autotests that prevent us to get RHEL 7.2 in the CI.
The same tests have already been blacklisted for RHEL 7.1.
Change-Id: I2aa62647f7bd75681ea9e1d69bc62f9542fda5e2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
QFormLayout currently allows to remove a row only through takeAt, which
doesn't resize the internal structure used to store the layout-related
data. The implementation of rowCount uses that structure so it returns
a row count that doesn't match what the user sees.
The removeRow methods complement that be doing a "real" removal which
will also keep the row count in sync.
[ChangeLog][QtWidgets][QFormLayout] Added removeRow(), takeRow().
Task-number: QTBUG-15990
Change-Id: I204b219a837887e4bf95d1bc77407f1c53ae9819
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The header defined a macro QTEST_NO_CURSOR depending
QT_NO_CURSOR or obsolete platforms Windows CE and Meego.
Replace usages by QT_NO_CURSOR in the tests.
Change-Id: I3edac88e684d1f932dd3b721bb1c1b3fe9144237
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
After 909d3f5c7, private families will not be shown in user interface.
Task-number: QTBUG-41318
Change-Id: I15ae77cacd2a27c9db4b1a8ffbb582416258988c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Remove Windows CE-specific files, #ifdef sections for Q_OS_WINCE and wince
.pro file clauses in library, examples and tests.
Task-number: QTBUG-51673
Change-Id: I102745aaca9d9737f2108fe7618111743d5ae980
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Ensures that QStyleOption is correctly initialized.
This prevents possible styling issues due to
QStyleOption's reporting version 0, see qstyleoption_cast.
This enables users to handle more cases in their QProxyStyle.
For now the test is only used for QCommonStyle.
Change-Id: I768db00b12b46890343fffe44e4f562762e9cf80
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Removing blacklistings from tests that are now passing.
Change-Id: I00aa1ce286d3e7715fb4bee4a36d0d77049a29ae
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
The test is preventing us to take RHEL 7.1 in the CI for Qt 5.7.
Changed the paintEvent() test to be less strict about the paintCount.
Task-number: QTBUG-51809
Change-Id: I84f797442e38c66dc23862e92eda6db08bcac368
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Cleaning out the workarounds for the discontinued "Embedded Android"
platform of Boot2Qt.
Change-Id: I0ff9d770e82a43457fb7e5da0428f4597ead4038
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The old code converted QRectF into QRect when applying the offset. Change
the offset point to QPointF and change the conversions accordingly. Add an
autotest similar to that of QPlainTextEdit.
This minimizes rounding errors and prevents conversions since
the input method logic mostly uses qreal.
Task-number: QTBUG-51923
Change-Id: I0c2f80ccae028d8bbbb97ec603f8782f69959c76
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Determine offset point to similar to QTextEdit::inputMethodQuery()
and add an autotest.
Task-number: QTBUG-51923
Change-Id: I8232eb348063e2cd95d0632fe74a6eb30c897eda
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Subjects each *.png file that matched grep -law "sRGB" to:
pngcrush -ow -brute -rem allb -reduce
(Two needed -force but did get smaller.)
Change-Id: Ia030f0bc1d3617ba716bcc26677ff919ef58423c
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Its currently not possible to style the arrows with QCommonStyle because
drawPrimitive from QCommonStyle is called instead from the proxy.
Change-Id: I910b13df110601cb18578bc16edfa5ddaa17bbd2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The most visible problem is that changing selection model didn't update()
the view, resulting in the old selection/current item still being drawn.
In general trigger the handlers for when the selection/current item
changes.
Change-Id: Ib3b2ad70412e6a21a182d4c173e617710bcc630d
Task-number: QTBUG-50535
Reviewed-by: Stephen Kelly <ske@ableton.com>
Set input method attribute to be aligned with read-only
value in QTextBrowser initialization
Task-number: QTBUG-52071
Change-Id: If0e64bf09e2a2d505ed66fcbfb8cd12ae39844d3
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
This issue has been solved some time between 5.6 and 5.6.0.
We just make sure to protect against further regressions.
Change-Id: Ic3fdad901ed5f36792ae04b3d65047da95eea668
Task-number: QTBUG-50561
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The API is incomplete since we can't show a tear-off menu
programatically. This could be useful when restoring the
application state on launch.
Change-Id: Ice1911b44a5b973680f67b0150efacf3d023c2c5
Task-number: QTBUG-47974
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
tst_qtabbar uses fixed values to check the minimumSizeHint and it fails
with screens that have a higher resolution. The test still uses the
default values, but now in the beginning it creates enough tabs so that
it goes over the default.
Change-Id: I3f891d2661288d7fad50ad522d73f634b3e91958
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Tested on the Ubuntu 14.04 VM. The test didn't fail anymore with
2000 test rounds
Change-Id: Ic12c60e5ebf9c234358a6983bf87fa0a88d7886e
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
A receiver of TouchUpdate and TouchEnd events is determined either
as a widget which has an implicit grab for the touch point or as a
visible widget if there are no implicit grabs. The events are sent
if the receiver has accepted TouchBegin event or if it is subscribed
to a gesture. Before sending the events to the widget they are
delivered to the gesture manager. Thus, in order to detect gestures
for the widget, it must own an implicit grab or be a visible widget.
It can happen that the parent widget is subscribed to a gesture, but
doesn't accept TouchBegin event, as in the case of QScrollArea. Then it
will not get an implicit grab and gesture detection will be impossible.
Activate an implicit grab for such widgets. Also don't send TouchUpdate
and TouchEnd to them, because it's against the documentation.
Task-number: QTBUG-43277
Change-Id: Id767583991def6d76c48ad15eb39af822cad115d
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Remove the member variable and instantiate only where needed
on the stack to prevent it from interfering with windows created
by other tests.
Remove flag Qt::X11BypassWindowManagerHint as it does not seem
to have any effect.
Task-number: QTBUG-51516
Change-Id: I3bf88bf148f365c57aaf989671f8b9c3c3f0d8e2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Given the flakyness of cursor positioning, loosen the check to only verify
that the cursor is outside the window. The hint is only active on Windows
depending on a system setting.
Task-number: QTBUG-51516
Change-Id: I474d251cc41e68f182baf8dba84eaf38d914d7ee
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This test has failed already in openSUSE 13.1 where
it has been marked as insignificant. Incorrect font
size is returned from a font dialog in tst_qfontdialog.
Task-number: QTBUG-46056
Change-Id: I7b5841e90d4cbe9d9573b46ec7dec64432160473
Reviewed-by: Akseli Salovaara <akseli.salovaara@theqtcompany.com>
The coordinates need to be scaled before calling QPlatformScreen::grabWindow()
On return, set a devicePixelRatio on the pixmap.
Adapt the QWidget test to scale the grabbed pixmaps.
Fixes pixeltool displaying the wrong part of the screen when High DPI scaling
is in effect.
Task-number: QTBUG-46615
Change-Id: I12de7df0da669230cf0fae74f4a42d43f061d5ff
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
First-level context menu grabs the mouse, so all mouse events are
delivered to it. This menu passes the mouse events to submenus. Any
platform delivers mouse enter/leave event differently when window is
grabbed. This patch unifies event delivery to context menus - it can
block some unwanted events and it emulates fake events if necessary.
This patch can reduce duplicated events and can provide proper enter
or leave event to additional widgets in the context menu. It can also
prevent submenu from unwanted close on Windows and X11.
Added autotest.
Task-number: QTBUG-45565
Task-number: QTBUG-45893
Task-number: QTBUG-47515
Change-Id: I7dd476d0be23afa34e947e54aef235012d173dcf
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
The protocol was originally developed by Canonical, currently supported
by Unity and Plasma.
Adjust some tests to use the non-native menu bar when they require it.
[ChangeLog][XCB / X11] QMenuBar uses the unified D-Bus AppMenu menubar
when the desktop environment supports it.
Change-Id: Iea74b40522573bcc4f70168fe7fa2a49b4f3fc21
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
This test fails in distros using GNOME due to
most likely bad usage of native dialogs.
Task-number: QTBUG-51148
Change-Id: I6e539b429266e298ce413565e0191bffa7fbe6bc
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QListWidget uses a set of slots for its selection model that are
connected only at creation time. This patch adds the missing
connections cleanup and setup when a user changes the selection
model.
Task-number: QTBUG-50891
Change-Id: I942bae6c471ea1ae22637d09b96d6fbd422f653f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The test was made insignificant for Windows in change
f3939d943e. As the failure is not
reproduceable locally, re-enable it. Also split apart the test.
Task-number: QTBUG-51149
Change-Id: I6a06bdf2369bc3bdbc73dfe4fa416e9d644f8b01
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Ensure that the window is active (as otherwise
QMdiArea::activeSubWindow() returns 0) and add a QTRY_COMPARE.
Change-Id: I7edb01d43fd2635864266614ef9a0e844f76edbf
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
This also reverts commit 018e670a26.
The change was introduced in 5.6. After the refactoring, 14960f52,
in 5.7 branch and a merge, it is not needed any more.
Conflicts:
.qmake.conf
src/corelib/io/qstandardpaths_mac.mm
src/corelib/tools/qsharedpointer_impl.h
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
Blacklisting all tests, which were failing locally.
Task-number: QTQAINFRA-949
Change-Id: I40c25ab0155b8977596d61297ab252a546515f87
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
On OS X, the default scrolling mode of item views should be
per pixel instead of per item. We enforce this through a new
style hint. On all other platforms, the behavior remains the
same.
It's still possible to override the style hint by using the
regular scroll mode setters. Any subsequent style change will
result in a no-op once the setters have been called and until
the properties are reset.
Some auto-tests had to be update to to take the new behavior
into account.
[ChangeLog][QtWidgets][Styles] Added SH_ItemView_ScrollMode
style hint.
[ChangeLog][QtWidgets][Item Views] Item views scroll per pixel
on OS X now.
[ChangeLog][QtWidgets][Item Views] QAbstractItemView::verticalScrollMode
and QAbstractItemView::horizontalScrollMode are now resettable.
Change-Id: I3f923275c99aa4389323b52fc1c5455fe71f8d73
Task-number: QTBUG-50102
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
Generate the qundo*.qm files for tst_QUndo*::commandTextFormat() in
the current directory (out of source, for a shadow build) rather than
alongside the qundo*.ts from which they're derived (in the source
tree); and remove them once loaded, if that succeeds. (On failure, we
might even want to look at them.)
Task-number: QTBUG-49081
Change-Id: I666985fa3ceb8c25c917b617d6d39141eddebb76
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Rename TestWidget to PaintTestWidget, because this class tests only
whether paint event occurs.
Remove unused variables.
Remove reset() method, because there is no need to reset only one
variable in class method.
Change-Id: I8f442c73598e3431baf2b0433fefc157d3f10ea6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This solves an instance where restoreState() was used when the
dockwidget was already floating and the saved state was also for
a floating dockwidget.
Change-Id: I1fe764ae2a6b0351ae26e33ffec682ad37c944d7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This reverts commit 4c71db7567.
It's too risky for 5.6, we should let it cook in dev for a while
and backport when ready.
Change-Id: I91e677e65d967f29c84a254cd3dffc8bb847b263
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Resetting focus_window and other internal QGuiApplication variables before
calling setVisible(false) and destroying the platform window means that the
platform window can't reason about whether or not it was the focus window
unless it can resolve that using native APIs. We should let the platform
window take care of resetting the focus window and related states, and
only execute our fallback logic if the plugin doesn't do the right
thing.
We also use QPA to update the state instead of modifying the internal
QGuiApplication variables directly, so that events and signals are
emitted as a result of the reset.
The QLineEdit test gets two added calls to processEvents(), since
assuming that activateWindow() is synchronous is not correct, and
would result in the QMenu resetting the focus window to 0 on destroy.
Task-number: QTBUG-46414
Change-Id: I562788393ed0ffd77d7a4be2279862322f721c1a
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
When the window container already has a window handle, allow embedded
windows to use this handle as a parent. This change will allow proper
window stacking and clipping.
Task-number: QTBUG-50477
Change-Id: I8d656ecb99e0c42ae7a7ac461e5e5b5d801f5493
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
1. Use qrc for test data so that it can be found on all platforms.
2. Skip a test which does not work on platforms where show() implies
showMaximized(), as it depends on the window size being 150x150.
3. Skip test for hover event which depends on having a valid
mouse cursor position.
4. Skip a couple of tests that fail on some Android devices.
It's not worth spending a lot of time investigating this at the
moment.
Change-Id: Icb2b7f1d82981546a2154a76535b95606d7f40da
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
When closing a popup dialog using a shortcut, when the popup
was originally opened using a shortcut, the closing-shortcut
would interfere with the state of the first shortcut, and we
ended up sending a key event for the original shortcut.
Task-number: QTBUG-50360
Change-Id: I62e5ddb9ca43b28519ede629775bc0d7598dccc4
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Don't cast a QDialog to a subclass it is not.
Fix by creating it as the required subclass in the
first place.
Found by UBSan:
tests/auto/widgets/dialogs/qdialog/tst_qdialog.cpp:203:20: runtime error: downcast of address 0x2b5f5000ad40 which does not point to an object of type 'DummyDialog'
tests/auto/widgets/dialogs/qdialog/tst_qdialog.cpp:203:46: runtime error: member call on address 0x2b5f5000ad40 which does not point to an object of type 'DummyDialog'
Change-Id: I63ae7e782bda6a78d11af5c2bc2f7d88aacd0ac0
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This reverts commit 56aad2ad60.
QWidget::mapFromGlobal() does not work correctly when the widget is
a child widget of another widget embedded into a QGraphicsView with a
transformation (scaling/rotation). It starts applying offsets going
up the widget tree (just as mapToGlobal) until it hits the embedded widget
not taking into account the transformation.
It would need to go in from to top to bottom or better be reimplemented
such that a QTransform for mapping coordinates from/to global is determined
which is then applied in reverse.
Task-number: QTBUG-50030
Task-number: QTBUG-50136
Change-Id: Iadeb891d793be1938c64942bfbf38d541a281c33
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The #if had a condition that was needlessly hard to understand;
and was widely separated from its #else clause.
Change-Id: I43f4282993f4f2e8c4b5ad07dc2c2e06a6b95aa9
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
- Instead of QString::split()-ing the path, just to inspect the
first item in the list returned, simply find the location of
the first separator and work with that.
-> saves creating a QList, and its QString elements
-> saves attempted detaches of that list when calling
first()
- When extracting the user name, don't do it in a QString, do
it in a QStringRef.
- When constructing the result, don't use QString::replace(),
use QStringBuilder with a QStringRef into the original string.
- Eradicate the out parameter, it is easily calculated from the
return value.
- Don't calculate userName on VXWORKS and INTEGRITY, where it
is not used. Requires a different #ifdef sequence. Fixed
preprocessor directives' indention as a drive-by.
Costs 84b in text size on optimized GCC 4.9 Linux AMD64 builds.
Change-Id: I61f1e8d558db7fb0c5c1170bdfd6f5ac1f1a9e62
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In setStretchLastSection we restore a default section size
if we no longer use stretch. That size was however not
sufficient - we should restore the actual size.
Furthermore we should also always stretch the last section
(last visible index) - and not leave a section with a
huge size and stretch another.
This patch refactors stretch handling and keeps track
of the last section and its size in eg. moveSection,
swapSection, hideSection, showSection etc.
There is an auto test showing and guarding its behavior.
[ChangeLog][QtWidgets][QHeaderView] Fixed some issues
(e.g QTBUG-39010) with restoring of section size after
a section is no longer the last visible section
(in stretchLastSection mode).
Task-number: QTBUG-39010
Change-Id: Id47075b5a9dfeb250027374ecbd10eb8babbf9ef
Reviewed-by: David Faure <david.faure@kdab.com>
The test produces compiler warnings in release builds:
tst_qgraphicswidget.cpp: In member function 'void tst_QGraphicsWidget::setTabOrderAndReparent()':
tst_qgraphicswidget.cpp:1521:89: warning: 'w2' may be used uninitialized in this function [-Wmaybe-uninitialized]
tst_qgraphicswidget.cpp:1536:88: warning: 'w1' may be used uninitialized in this function [-Wmaybe-uninitialized]
Use arrays instead of the variables w1,2... and rewrite the helper
function compareFocusChain() to work on iterators allowing to
remove some temporary lists. Also return error messages in a
QByteArray ready for the Q[TRY_]VERIFY2 macros.
Change-Id: I43466921af59521d1faf00b75fe943508418abb3
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This partially reverts commit 025d6a778c.
Change-Id: I7b964b0d598abe46137c22177fe2b5dcca5bb812
Task-number: QTBUG-49831
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Previously, the geometry stored for floating dock widgets
in QPlaceHolderItem::topLevelRect and QDockAreaLayoutInfo::saveState()
included the window frame (frame position/content area size).
This does not work in the case where a floating dock widget is deleted
since the geometry is determined after reparenting the widget when the
frame geometry is no longer available. Change the behavior to store
the geometry excluding frame to avoid such problems and adapt
QDockWidgetPrivate::setWindowState() accordingly.
Task-number: QTBUG-49832
Task-number: QTBUG-45780
Change-Id: I84b5c80df6e1c9e738bbb1407b9047cc84719ce0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Since special files have file size == -1, they were always filtered
out by QFileSystemModel, even when passing QDir::System as filtering
option. Keep them instead.
The testcase is more convoluted than it should be because QFSM
is so broken that it returns valid indexes for invisible elements
in the model (such as filtered out elements).
Change-Id: I023a9813dbfeed7be99dded42c66b1191afdc17e
Task-number: QTBUG-20968
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The test was comparing an "unsorted" file listing read from disk
with a reference listing, checking whether the two were different.
Obviously that's a nonsense test, as there's no stable order
for the entries returned by readdir_r and friends.
Change-Id: I1d781a6513c42bb0b585d02e57a771c5336c7df4
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
I still have no idea how to fix this properly given the absolute mess
of QWidgetLineControl. For now add a failing test.
Change-Id: Ieb5ad6994c8ce7deb0cd0f2f47d51073d042244e
Task-number: QTBUG-49295
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It makes little sense to give focus to a hidden widget; in order
to make the treeview visible, we need to set the view mode to Detail.
Change-Id: I453111e83593a790a656651b603a9c9b1a78dd9d
Task-number: QTBUG-7690
Reviewed-by: Jan Blumschein <jan@jan-blumschein.de>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
... otherwise we would not detect subsequent file/directories added
into the non-removed one.
Change-Id: I43018dfb9a9c6c0399190800da3f0d572ec5d8d8
Task-number: QTBUG-49307
Reviewed-by: David Faure <david.faure@kdab.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
When a QLineEdit is readonly there's a discrepancy between key press
events and shortcut override events. For instance, presses Ctrl+C
copies the text unless there's also a shortcut for the same key sequence.
In this case, the shortcut override event is not handled, and no text
is copied. Fix it by splitting the handling of shortcut override
events between "read only" access (copy, select, etc.), which still
makes sense on a read only line edit, and write access (paste, ...)
which doesn't.
[ChangeLog][Important Behavior Changes][QLineEdit] QLineEdit will
now accept certain shortcut override events even if it is read only.
Change-Id: Ie5b048259b99a1eff0581129e3ad97f27a88fe86
Task-number: QTBUG-21217
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
The documentation says that we scroll one pixel, but changing the
behavior in 934f062203 to do that
was not well received.
People were relying on the undocumented behavior - and the new behavior
was considered to be a regression. (Nobody called setSingleStep since
Qt in many cases provide a reasonable singleStep - which implied that their
programs scrolled with 1 pixel which was quite slow). Furthermore getting
the old behavior (auto set of single step) was nearly impossible.
However the revert (done in 0e69230d02)
gets us back to QScrollbar::setSingleStep not working in pixel scroll mode
(even without it being documented - but we should also have a working API
rather than documenting that it is not working)
The previous approach was directly prevented Qt from changing
single step (on e.g resize) at all. This patch only prevents Qt from
changing when a user explicitly has called the function
QScrollBar::setSingleStep (in pixel scroll mode).
That is we expect that calls to setSingleStep means that the user actually
wants to set the singleStep and doesn't want Qt to control that value.
Furthermore it is possible to switch back to the automatically adjusted
singlestep with QScrollBar::setSingleStep(-1).
[ChangeLog][QtWidgets][QAbstractItemView] QTBUG-7232 - In ItemViews
when scrollMode is set to scrollPerPixel, it is now possible to
change the single step. Qt will automatically adjust the single step
until setSingleStep is called. When setSingleStep is called it will
however respect the set and stop doing automatic changes of the value.
Calling setSingleStep(-1) will switch mode back to automatic adjust.
Task-number: QTBUG-7232
Change-Id: Ibfe0caa9751d3bcc11bfc6e0654a3d1ac35ac8ae
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Replace hide() call (present in itemViewKeyboardEvent since Qt 4.5)
by reject(). Add signal spy to existing test function.
QDialog doc states that reject() will always be called on Key_Escape.
hide() is not enough: it makes exec() terminate and return the proper
value, but the signals finished(int) and rejected() will not be sent.
Task-number: QTBUG-7690
Change-Id: Ica4ae2843574478c5b9a7672f871f3ef3f16f3c9
Done-with: Jan Blumschein <jan@jan-blumschein.de>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
In a QPair, the member names {first, second} have no semantic
value. A simple struct, while not as featureful as QPair, can
be given meaningful member names, {rect, index}, in this case.
Change-Id: If1e289ecee82a1cb020ac3a854efd2ec1096493b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Use SW_SHOWNORMAL instead SW_SHOWNOACTIVATE as a parameter to
ShowWindow() to enforce the window to be restored to normal state,
even if the state before minimized was maximized.
Task-number: QTBUG-48449
Change-Id: I9436623b1495f574a72050e50e8b31bfc83ced5c
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
The old code was extremely inefficient, and QCollator
can provide the same functionality in a much better
and faster way.
Task-number: QTBUG-30902
Change-Id: Iaf5dbe587d9a6ebca26885259fdee74a29d3c84f
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
In QMenuPrivate::hideMenu(), delay clearing of 'causedPopup.widget'
to after the QMenu::close() call, so that it is still accessible
in QMenu::hideEvent() which calls QMenuBarPrivate::setCurrentAction(0)
if the caused widget is a QMenuBar.
Task-number: QTBUG-47377
Task-number: QTBUG-49592
Change-Id: Idbda48e918dae799afea84068a60d7383d7b4971
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The platform window geometry can be misleading until it has
been properly positioned and
QWindowPrivate::resizeEventPending has been cleared.
Task-number: QTBUG-49588
Task-number: QTBUG-48396
Change-Id: Ie065f62478fc8522a9ad51391bb897510afa5aad
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Remove unused ctors and dtor, add Q_OBJECT, indent,
privatize slots, don't check for nullptr before
delete'ing a pointer, and add one override keyword.
Setting test_box (a QPointer) to nullptr is already
done by the variable's default ctor.
Change-Id: I13f06dc8104ef1c0ac08a25c960641c076f10499
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The platform is no longer supported or actively maintained, and is
in the way for improvements to the Unix event dispatcher and QProcess
implementations.
Change-Id: I3935488ca12e2139ea5f46068d7665a453e20526
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Currently QOpenGLWidget and QQuickWidget do not support having native
child widgets inside the same top-level window. In some cases this is
inevitable, f.ex. multimedia may require native windows when used from
widget apps. winId() calls made for various (valid or invalid) reasons
are also problematic.
There are no blockers for supporting this setup, however. By storing
multiple texture lists (one for each subtree where the root is a
native widget), adding the missing markDirtyOnScreen calls, letting
each native widget access the correct texture list (i.e. the one
corresponding to its children) when they are (separately) flushed, and
fixing composeAndFlush() to take the update region and the (native
child) offset into account, it can all be made functional.
The change also fixes the issue of keeping GL-based compositing
enabled even after all render-to-texture widgets in the window become
hidden. Due to the changes of how such widgets are gathered,
composeAndFlush() is not invoked anymore when no such widgets are
discovered for a given native parent. This is great since having
compositing enabled infinitely is an issue for applications like Qt
Creator that implement certain views with QQuickWidgets but cannot
afford the cost of texture uploads in other places (e.g. for the text
editor) on slower machines.
The openglwidget manual test is greatly enhanced to test various
situations (MDI, scroll areas, tab widgets, QOpenGLWidget as native
child, QOpenGLWidget with non-tlw native parent, etc.)
Task-number: QTBUG-48130
Task-number: QTBUG-49172
Change-Id: Iad098359c8bcf749f01c050da0853415e1550eda
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
This is due to the Gtk style in use. It is already blacklisted for
Ubuntu and in Qt 5.7 we'll use Gtk 3, so there is no reason to invest
into fixing this.
The test used to pass because we would build with -no-gtkstyle.
Change-Id: I1cf26301ba8b19be9a995837b0b5984838ec777a
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
tst_qmenubar::taskQTBUG4965_escapeEaten
tst_qtabbar::sizeHints
These tests will not pass when Gtk style is enabled, similar to the Ubuntu
blacklisting.
Change-Id: I590d84fb7ce0df28d0e8525e0f04b676280a12ff
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
This is follow-up for QTabBar fix ea47d152b3.
In native OS X applications using mouse wheel on combo boxes have absolutely no
effect. We should bring the same behavior to Qt based OS X apps too, as users
are complaining of unexpected behavior, eg. randomly switching Qt Creator
sidebar mode when scrolling file list and moving mouse pointer little bit
above. Moreover inertial mouse behavior on OS X makes combo box usually move
several indexes, rather than single one on slight finger slide.
This also applies to iOS apps so the change affects all Apple platforms.
Task-number: QTBUG-10707
Change-Id: I6582265039198707ad8c2f54de96ee2a0b0e0b47
Reviewed-by: Adam Strzelecki <ono@java.pl>
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
Introduce class ExecCloseHelper which runs a timer
timer checking for the test candidate to become
the active modal window and closing it either
by key event or calling close.
The test then runs in 4s as opposed to 45s before.
Task-number: QTBUG-38890
Change-Id: I610fb09e6b8269d218cddc8d11abae2bd3317f9d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
A dialog embedded into QGraphicsView has Qt::WA_DontShowOnScreen set
(similar to a native dialog). It must not trigger the modal handling
though as not to lock up.
Task-number: QTBUG-49124
Change-Id: I22ce3f18d01df017b9317666770686bd4491387f
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
When rebuilding the tab bar after hiding several dock widgets,
the index gets offset.
Task-number: QTBUG-49045
Change-Id: I05f6a976ca1d8c6f7cdf6532f1a728483398eabc
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This also fixes the underlying cause of QTBUG-44039 and QTBUG-43885.
You can choose between system, qt, and no libdouble-conversion
support. If you choose "no", snprintf_l and sscanf_l will be
used.
By default, system double conversion is used if the system provides a
double-conversion library. Otherwise the bundled libdouble-conversion
is built. sscanf_l and snprintf_l are not used by default as the
planned "shortest" conversion mode to produce the shortest possible
string will give less precise results when implemented with snprintf_l.
Change-Id: I8ca08a0fca5c54cf7009e48e771385614f6aa031
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This may result in incrementing an invalid iterator after the
iterator's container has changed. Also, for this to happen,
the view needs to have an active editor.
The reentrant call happens as follows in QTreeView, after the
model adds new rows to the view:
QTreeView::rowsInserted()
QAbstractItemView::rowsInserted()
QAbstractItemView::updateEditorGeometries()
QTreeView::visualRect()
QAbstractItemViewPrivate::executePostedLayout()
QTreeView::doItemsLayout()
QAbstractItemView::doItemsLayout()
QTreeView::updateGeometries()
QAbstractItemView::updateGeometries()
QAbstractItemView::updateEditorGeometries()
Other concrete item view classes may be prone to the same issue.
The fix consists in relayouting the items if needed, which should
trigger calling updateEditorGeometries() again. This doesn't
invalidate previous optimizations regarding item relayouting since
we only force relayouting when it'll be done by visualRect().
Change-Id: Id31507fdc8d9a84d50265298191d690d1a06792b
Task-number: QTBUG-48968
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Compare against isVisibleTo() in QLineEditIconButton::actionEvent()
so that action events received before show() are handled correctly.
Fix a regression introduced by change
4dccb2ca67 for handling action
events causing side widgets to overlap when added before the widget was
shown. Use QAction::isVisible() to determine visibility.
Task-number: QTBUG-48806
Task-number: QTBUG-48899
Task-number: QTBUG-39660
Change-Id: I7a39a3b9a094f2c74cde09544f1158deb2b81cf2
Reviewed-by: David Faure <david.faure@kdab.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Ia067cd966bf13506e6ca19925eae3158da027b83
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Check whether the action under the mouse is enabled before closing.
Task-number: QTBUG-48493
Change-Id: I2a0669840b9b6c81dacdf179325301c02f1c0c35
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The delegate may be null in QHeaderView.
Task-number: QTBUG-48543
Change-Id: I4d3ba104b0b57431e8765271dc2dc880be096672
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Prefer QCOMPARE over QVERIFY for equality and use QLatin1String().
Change-Id: If226a0fc7b25be3e6774c7e36ca1e6f99234e5dd
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Removed the insignificant flag so the rest of the test becomes enforcing.
This test seems to fail only on win32-msvc2010_developer-build_angle_Windows_7
Task-number: QTBUG-31611
Change-Id: Ic4818e50305e1e15eb67b505205436d3fec0ccfb
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Calculation was working as long as one didn't use per pixel scrolling.
Task-number: QTBUG-48579
Change-Id: Ie02e28b008c5c81ed45d7dd17fed96148c23b598
Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Also re-enable and update the tst_showWithoutActivating test.
Change-Id: Ic7fa9b1bf7637e4661c593aaeabb3220cd4204ff
Task-number: QTBUG-46098
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
OldPersistentIndexes store selected items during sort operation. They
were wrongly taken from static list of indexes. This change takes them
from parent (QTableWidget) who maintains the list of selected segments.
Task-number: QTBUG-48408
Change-Id: Ie1bc4071a275dd76d113d883ab30ccd4cb1fa625
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Introduce error messages showing the path in file existence,
file type and directory entry list tests to make fails related
to missing UNC shares clearer.
Task-number: QTBUG-48504
Change-Id: I5fb401b94cfa8b58562a906b8d9765039e334027
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
If QT_NO_LIBRARY isn't set we cannot test QCoreApplication's library
path functions and none of the plugin and library related tests are
applicable. Also, examples that rely on dynamic plugin loading for
their core functionality obviously don't work.
Change-Id: I2d381ee1bc8d944e1181557895a7e92a364fd778
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMdiSubWindow should not reset parent of base widget
if it has been already changed before.
Task-number: QTBUG-47993
Change-Id: I43e3a28481e9ba3026a93850a8cc1246a359852a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Use QVERIFY2() with QTemporaryDir/File::errorString() consistently.
Attempt to catch issues like the below warning and follow-up issues.
QSYSTEM: tst_QFiledialog::clearLineEdit() QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\_____aaaaaaaaaaaaaaaaaaaaaa" (Access is denied.)
Task-number: QTBUG-47370
Change-Id: I58a6e87c502627e976efa62ad73c912f3b2d49fa
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use case insensitive comparison and static invocation
of QGuiApplication::platformName().
Change-Id: I8c197c7b4f0669f71c019fbcee09a0f03dfab399
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
When working with QGraphicsView/QGraphicsScene, touch events are sent to
QGraphicsView's viewport() event handler, which then dispatches it to the
corresponding QGraphicsItem, if any. In the case of QGraphicsProxyWidget, we
need to forward these touch events to the encapsulated QWidget, otherwise it
will never receive them (i.e. the event chain for touch events terminates at
QGraphicsProxyWidget).
This also enables QWidgets associated with QGraphicsProxyWidget to grab
gestures.
Task-id: QTBUG-45737
Change-Id: Ia441d3576afb6c97376be6f2ff073901e6e928a5
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
The derived classes (QSpinBox, QDoubleSpinBox, QDateTimeEdit, QTimeEdit)
set various input method hints on the spin box in the init() methods
of their private classes which did not have any effect since
QAbstractSpinBox::inputMethodQuery() was implemented to return the
hints of the embedded QLineEdit only. Change it so that hints set
on the QAbstractSpinBox are also considered.
Change-Id: I76b7c4d3e0869589c110cf3a0b2c3f94201db5d5
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
The test is moved from tst_qtreeview to tst_qtreewidget as it tests
qtreewidget class.
C++ usage is fixed, there was an illegal C cast that was causing crashes
Change-Id: I80e90a9b531e87f9b133186b6f48be42f54901b5
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
It sends a shortcut override event directly, which should go
though QPA anyways.
Change-Id: Ie2c6f45cd44222cd9be8846099573dcd2968a77c
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
By default when using Qt Style Sheets, a widget does not inherit its
font and palette from its parent widget. With the
Qt::AA_UseStyleSheetPropagationInWidgetStyles application attribute set,
propagation when using Qt Style Sheets behaves like it does with regular
QWidget::setPalette() and QWidget::setFont() calls.
[ChangeLog][QtWidgets] Added the
Qt::AA_UseStyleSheetPropagationInWidgetStyles attribute which enables
font and palette propagation for Qt Style Sheets.
Task-number: QTBUG-37580
Change-Id: I3038c13d61e32625a1a05291c5394eaefd376a68
Reviewed-by: Samuel Nevala <samuel.nevala@intopalo.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Cocoa is basically just AppKit + CoreData. Since we do not use CoreData
in Qt, there is no reason to link to it or (transitively) import its
headers.
This is just a mechanical replacement of -framework Cocoa with
-framework AppKit and <Cocoa/Cocoa.h> with <AppKit/AppKit.h>
Change-Id: Ibcfc8a03c0ddff27a67fbc87dd7bd58a4b648956
Reviewed-by: Mika Lindqvist <postmaster@raasu.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Every other subclass of QWidget calls event->ignore() on unhandled
events, and QGroupBox's failure to follow this convention prevented it
from being used in some specialized applications. Instances of QGroupBox
now only absorb mouse press events to their checkboxes (if they have
checkboxes) and ignore all other mouse events.
Task-number: QTBUG-15519
Change-Id: I6b0c89c92868feddbe3888088703b32cb95d9903
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
RCS files (text/plain) have the glob pattern "*,v", which caused
the regular expression match to fail.
Task-number: QTBUG-47923
Change-Id: I7d8682ef51306cb4da58a2b3880842bd99892ea3
Reviewed-by: David Faure <david.faure@kdab.com>
This will allow us to drop gtk2 support from qtbase in future,
while still providing the gtk2 style for those who want to use it.
Also with moving to qtstyleplugins, the code can be simplified
because we can directly link to libraries we need, instead of using
QLibrary.
[ChangeLog][QtWidgets] Remove QGtkStyle, it is now provided in
qtstyleplugins repository.
Change-Id: I6221b1a513d7fda32e080f3ca159b0b2f8a8f246
Reviewed-by: Timo Jyrinki <timo.jyrinki@canonical.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jens Bache-Wiig <jensbw@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Fix usage of API that is marked deprecated.
Change-Id: Ib9a45e93084fb5b0d0d3aefd64b755dff7c696d6
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Ensure QAction::setVisible() is
handled and reposition if visibility changes.
Task-number: QTBUG-39660
Change-Id: I14f0659aedc8dc89ddef3159d3a500b40b1563ff
Reviewed-by: David Faure <david.faure@kdab.com>
We don't replay mouse events after closing popups on X11.
This leads to the bug when the menu doesn't show after
clicking three times on the menu bar. It can be fixed by
reverting 78d7192338, but
then we need an alternative fix for QTBUG-32807 on Windows.
So don't replay mouse events for the menu bar on all
platforms.
Change-Id: I3db8e24a6de6f35b0a17dffac6a131f1cad42e6d
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Ie29640451dddeb58342038a8cd5fac152cce39e5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Build it only in -developer-build mode for tests that might depend
on exact-matching font behavior.
Return earlier to avoid doing any useless job.
Change-Id: I966ee5689f03403e45f4c957b63e3113f0467803
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
According to history, the test was supposed to verify
the correct parsing of the command line on Windows by the qWinCmdLine()
function in corelib. It did not test anything since the test
application printed out argv[1] instead of
QCoreApplication::arguments()[1]. Since qWinCmdLine() has been replaced
by the WinAPI CommandLineToArgvW(), the test no longer makes sense
and also starts to fail then warnings are printed to the error output.
Change-Id: Idf642783ebb56eaa8fba9004174557485563a84f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Rename the test slot eventFilter() to testEventFilter(), which fixes:
tst_qgraphicsproxywidget.cpp:101:10: warning: 'tst_QGraphicsProxyWidget::eventFilter' hides overloaded virtual function [-Woverloaded-virtual]
void eventFilter();.
Change-Id: Ia05d188b18dcbf3a0b093dcea19a7122bcde6e62
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
tst_qgraphicsanchorlayout.cpp:144:5: warning: ignoring return value of function declared with warn_unused_result attribute [-Wunused-result]
layoutGeometry.adjusted(+right, +top, -left, -bottom);
Change-Id: I411ccaa867e418f36869fc244ea2eeaa5b117312
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Fix warnings:
tst_qtcpsocket.cpp:245:9: warning: private field 'numConnections' is not used [-Wunused-private-field]
int numConnections;
^
tst_qtcpsocket.cpp:1834:9: warning: private field 'exitCode' is not used [-Wunused-private-field]
int exitCode;
tst_qcheckbox.cpp:86:10: warning: private field 'tmp' is not used [-Wunused-private-field]
uint tmp;
^
tst_qcheckbox.cpp:88:10: warning: private field 'tmp2' is not used [-Wunused-private-field]
uint tmp2;
Below warning is caused by code #ifdefed for OS X only, make it a local variable:
tst_qlabel.cpp:114:16: warning: private field 'test_edit' is not used [-Wunused-private-field]
QLineEdit *test_edit;
Change-Id: I53c755545fe2e7ca1f053f40c8c0e50aec2efcdd
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
The test showed failures on OS X:
FAIL! : tst_QListView::batchedMode() Compared values are not the same
Actual (ba.size()): 2
Expected (3) : 3
Loc: [tst_qlistview.cpp(848)]
Use QTRY_COMPARE() to count the number of visible indexes with
a helper function instead of using hard-coded timeouts. Item 3
appears with a little delay on OS X.
Change-Id: I2fb2ff5ebdf9dbe85bdc79401375ad6f47b7b12b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The test checks whether a child window receives
mouse events synthesizes from touch. Enlarge the child
window so that it fully covers the parent and move the
touch point a bit inside so that it is not affected
by window manager positioning issues.
Use QTRY_VERIFY.
FAIL! : tst_QApplication::touchEventPropagation() 'widget.seenMouseEvent' returned FALSE. ()
Loc: [/work/build/qt/qtbase/tests/auto/widgets/kernel/qapplication/tst_qapplication.cpp(2107)]
Change-Id: Ic08e68b1e547cc7148cd8994464fdc2a14ac507b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
We have ownership for a reason - and there seems to be
no good reason not to accept it here.
[ChangeLog][QtWidgets][QComboBox] QComboBox::setView no longer
deletes the old view directly. It now checks the ownership first.
Change-Id: Icb5e5c0a6e9dc93c1d1c1a90ff57fbcc0786aa60
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Sending several key presses with repeat=true should trigger the action
several times, unless autoRepeat is set to false.
Change-Id: I6469bbd78a608a87852554882c1632ce34422662
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Keeping the reference may end up in a crash if a created
QIcon outlives the QFileIconProvider and we then try to
generate a pixmap.
The reference is not necessary since the options are queried
only when creating the icon, so they can be saved in the icon
provider.
Task-number: QTBUG-46755
Change-Id: I5c60887c2ed39030a2a20298ff10fd652189e4e7
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
When executing the test in a sequence (as done by make check after
tst_qstackedlayout), tst_QToolTip::task183679 often fails since
apparently the tooltip is hidden when the cursor is near it.
Move to the cursor to the right corner of the widget to fix this.
Change-Id: I3b13239e77cb387f1b1425fab79c8d6faa27b5bb
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Instantiate widgets on stack and add cleanup function for the check.
Change all functions instantiating a QFormLayout without widget on
the stack to use a toplevel widget and pointer variables since
otherwise, the labels automatically created by a call like
QFormLayout::addRow("bla", widget) leak.
Change-Id: I72a7a9c3175b5793a9450c6fcb970012ccd2274b
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Instantiate widgets on stack and add cleanup function for the check.
Change-Id: Ia527c228f9173d1b5aeba94ba4e14e1beba60731
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Gather member variables testWidget, testLayout, w1..w3 and sp
used in getItemPosition() and itemAtPosition() in Helper
class ItemTestWidget.
Remove member variables m_grid, m_toplevel and instantiate the
top level widget on the stack in minMaxSize().
Remove empty slots and functions.
Add a cleanup() test checking that no visible top levels
are leaked with explanatory comment about data driven tests.
Change-Id: Ia30120d78144dab3b7c73864c6fbcef606cb19d3
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
The test tried to position the mouse cursor over item #0 . This
sometimes results in the cursor being outside the window when
the window manager adds the window decoration on X11.
Move the cursor to the center of the window instead.
Add cleanup slot checking top level leaks, remove empty
functions.
Change-Id: I908240e1cc3fdbe370b43eae0015272ca342a312
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Move the code path handling widgets embedded in QGraphicsProxyWidget
into the loop moving up the parent hierarchy.
Add child widget to test.
Task-number: QTBUG-41135
Change-Id: Ibd86413faaa927145a85a2f5864f162979135053
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Add a cleanup function for the check and disable animations
in tst_qwidgetaction to prevent effect widgets from interfering
(vista style animations).
Change-Id: I043ecb131c8dcd07b6ef10bc75c9e010ab569e85
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Size policies can be compared for equality,
so qHash should be overloaded, too.
[ChangeLog][QtWidgets][QSizePolicy] Added qHash(QSizePolicy).
Change-Id: Id219f47ac6cb236efdd73cad7b892c8efd034d5c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
When trying to do a straight right/left/up/down swipe, a minimal
change in the other direction caused to the gesture to be canceled.
Introduce a threshold for checking such to prevent this.
Task-number: QTBUG-46195
Change-Id: I3e199f2ec0c81d23a16073b1f5b8fff004958239
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Don't hit the scrollbar with the mouse click
Change-Id: Ie82d8c5c058df9a482e7d5de2fe40681572f19ad
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
make sure it'll work with the new mouse handling as well.
Change-Id: Ia2d567e618b77b0fa3532ee6c335cbdf5e496241
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Since we added font matching by style name, the style name is not just
a derived property and should not be ignored in comparisons.
The QFontDef::exactMatch comparison is left unchanged, since it tests
if a loaded font matches a requested one.
Task-number: QTBUG-30851
Change-Id: I4187c5b993815001f35bcf24dc449059bfdcba6f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
- Implement init() and cleanup() to verify that
no top level widgets are leaked.
- Position widget in tst_QToolTip::task183679() and set
window title.
- Remove hardcoded wait in tst_QToolTip::whatsThis()
and use a find function within QTRY_VERIFY().
- Rearrange and clean code a bit.
Change-Id: I0b1ad88444fc9441c1071a2527f75de1f68ea9e5
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The positioning test has been observed to fail on X11.
Change-Id: I58727126a8742de93ec203e9992a9ae1b454f731
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
We have at least 5 different (but equal) implementations of a wrapper
in Qt, and some code uses explicit NSAutoreleasePools. Having a shared
implementation lets us clean up things a bit and makes it easier to
reason about which pools are actually needed.
Change-Id: I2fd8eefc3ae7308595ef9899b7820206268362a5
Reviewed-by: Tim Blechmann <tim@klingt.org>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Two (?) tests can fail: what they actually try to test is that our application
quits on the second single shot timer (2 s. timeout) and not on the first one
(timeout 1 s.) - on the first timeout we either ignore event, or we still have another
window and should not quit yet, on the second timeout we actually do quit the app.
The test checks this in a quite fragile way, counting the number of timeouts for the third 100 ms
timer. It looks like on OS X (VM-only) there is some delay (~500-600 ms) before we receive the
first timeout so the count is always 14 or less, making the test to fail.
Change-Id: I9e8728e6c956025d91528f4195982767a5d3d320
Task-number: QTBUG-46164
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
QTreeViewPrivate::updateScrollBars depends on a correctly set up
viewItems vector. If a delayed layout is pending, we must call
QTreeViewPrivate::executePostedLayout before accessing any stored model
indices.
Task-number: QTBUG-45697
Change-Id: I55fcbaf81f225b26181c2cf739283740b85dd16a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The tests blacklisted have been found using CI builds logs.
Change-Id: Iffc9043654a9dcd97d55e262011c8daff6f4e60f
Task-number: QTBUG-25300
Task-number: QTBUG-45502
Task-number: QTBUG-46325
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Convert vertical wheel events to horizontal for two cases of
the items layout when vertical scrolling is impossible:
1) TopToBottom flow with wrapping
2) LeftToRight flow without wrapping
Do it only for pure vertical events to avoid a mess for such
devices as touchpads or Apple Mouse.
[ChangeLog][QtWidgets][Important Behavior Changes] Allow
horizontal scrolling with a vertical mouse wheel for QListView.
Task-number: QTBUG-37007
Change-Id: Ie2525153fa7b443d27ca08cc5f5d4d7ecdb8c183
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
These changes are required to make event delivery from
test lib synchronous.
Change-Id: I8f7093a2bfe01dfa1b0315620d672e7346a7a23a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The test fails on all ubuntu versions, not only 14.04 as far
as I can tell.
Change-Id: I1e204f68bbb791eef25338f0ed007942a2eb22ff
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The resizeColumnsToContents test would fail on some machines, as the
requested 40 pixels where to small to accommodate the header size hint
as well. Raising it to 60 pixels helps make the test pass.
Change-Id: I2a5026fd18425e236849a1cef25ba8d899c7ae5a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QCursor::setPos with Cocoa integration is calling CGEventPost. Some time is required
before the cursor position is really set, so we can not immediately call QCOMPARE.
Change-Id: I83a4c13f06ec151a4b9ab18c83de1eb5247ea9cc
Task-number: QTBUG-45553
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
The test is marked as XPASS in CI. This change follow 201bf9e673.
Change-Id: I0938b1417f792aa88fc1b40c08e7cd810e7d22f7
Task-number: QTBUG-22326
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
When both scroll bar's policies are set to ScrollBarAsNeeded, make sure
the scroll bars are shown if needed and not show if not. Even the corner
case, where one scroll bar's visibility depends on the other, is handled
properly.
Task-number: QTBUG-45470
Change-Id: I11d6ccf7c0b51644a5ce2d5c3fc59e2e4812755d
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl>
ItemIsTristate only makes sense in tree widgets, where it triggers the
auto-tristate behavior between parents and children.
Change-Id: Idfa8bb5d0b9c63fe450115fb58d088929e11c7ff
Reviewed-by: Jarek Kobus <jaroslaw.kobus@theqtcompany.com>
