This implements the build system bits required to build Qt
as as separate wasm modules a.k.a Emscripten side modules.
Enable by configuring with the "-shared" flag.
This is the first step towards shared library support and gets
us as far as being able to load QtCore and instantiate a
QCoreApplication.
Task-number: QTBUG-63925
Change-Id: Ib8f07f80fb5b13c8dbba65c7db735dc557b70d0e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
And also teach CMake to treat it properly instead of hardcoding the
version number.
[ChangeLog][Build System] The configure script now accepts a new
parameter -disable-deprecated-up-to which is used to remove all
deprecated code from API and ABI while building the libraries.
The version number must be specified in a hex format.
For example, it can be used like this:
/path/to/qt/configure -disable-deprecated-up-to 0x060500
to remove all code deprecated in Qt 6.5.0 or earlier releases.
Task-number: QTBUG-101510
Change-Id: I557cf83e29b867fa1052bb097985e144b5eaf34d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The new name describes the behavior in a better way.
[ChangeLog][Build System] The QT_DEPRECATED_WARNINGS_SINCE macro is
renamed to QT_WARN_DEPRECATED_UP_TO. The old name is deprecated, but
is still recognized if it is defined during configuration and the
new name is not defined.
Fixes: QTBUG-104944
Change-Id: I320c033010dfab120db6922598454f95169657f7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The new name describes the behavior in a better way.
[ChangeLog][Build System] The QT_DISABLE_DEPRECATED_BEFORE macro is
renamed to QT_DISABLE_DEPRECATED_UP_TO. The old name is deprecated, but
is still recognized if it is defined during configuration and the new
name is not defined.
Task-number: QTBUG-104944
Change-Id: Ifc34323e0bbd9e3dc2f86c3e80d4d0940ebccbb8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add the support of pre-cooked content for the LD version script. The
content can be generated without using the perl script at configure
or build time.
Change-Id: I1316e114a1d5550b2fdcf3482a51f336fb311a29
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
We're in 2022. A 11-year-old C standard probably suffices, especially
since we require C++17 anyway.
Pick-to: 6.4
Change-Id: Ibcde9b9795ad42ac9978fffd16f3555327097ded
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
add_custom_command with PRE_LINK doesn't work correctly with
Multi-Config builds. The better solution is to introduce a custom
target that generates the final version script and link the target to
the library target as the dependency.
Change-Id: Ib7420af752a6a46f29f411f9f0dc8557410b4f22
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building Qt we should have warnings of any internal use
of deprecated API, so set it to Qt7.
Also added comments to clarify what the macros do.
Change-Id: Ib47278fed9ab1ec4411ed9f69a9a9c0f811db02d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Use VERBATIM option to prepare the correct command line for the
add_custom_command. This especially sensitive when using build
directories with names containing special symbols, that cannot be
handled by shell correctly.
Change-Id: I51d7041cb806411135fd59bf6273c04a3c695443
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
1. Clang-CL can't recognize "/d2FH4" and it's causing
lots of warnings when compiling. So don't apply it
when building with clang-cl.
2. The definition of "FS_INFORMATION_CLASS" need to
be visible to clang as well. Don't know why it was
excluded originally.
Pick-to: 6.3
Change-Id: I7b6e14999eea0ba1f0d73962ff03a35548f88a5a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When compiling CUDA sources in a user project, the Qt6::Platform target
would pull in C/C++ related compiler flags, leading to compiler errors.
Make sure that we only add those flags to C/C++ source files.
Pick-to: 6.2 6.3
Fixes: QTBUG-99548
Change-Id: Idbccd65fe8f66abd1da3fce95e563065d1ed3cc6
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Visual Studio 2019 introduced the dubbed FH4 feature
which can make C++ exception handling smaller on x64.
According to the article [1], it's enabled by default
for UWP applications, and Microsoft also use it in
their own widely-known commercial products such as
Office to reduce the binary size.
So make use of this feature for Qt when possible, to
get smaller binary.
As a drive-by, add "/EHs-c-" explicitly to the flags
when we want to disable C++ exception handling.
[1] Official article that introduces dubbed FH4:
https://devblogs.microsoft.com/cppblog/making-cpp-exception-handling-smaller-x64/
Change-Id: I2e3330de477f78372cf7903d0ef7a732b09552a9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This hasn't worked for some time. It's not in our CI and I don't think
it was working at all. When I tried to build it, I ran into several
problems with C++17 and an Internal Compiler Error I did not have any
interest in working around.
After discussing with the Intel compiler team, it was decided that
fixing those issues in the old compiler is not going to happen. Instead,
their recommendation is to adopt the new LLVM-based compiler, which
the last commit added support for.
This commit does not remove qmake support for the old ICC. It's possible
someone is using qmake with a non-Qt6 project and ICC.
Change-Id: Icb2516126f674e7b8bb3fffd16ad6350ddbd49e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This includes a few cleanups to our .cmake files where it was easier to
combine existing sections of Clang / AppleClang that no longer needed to
be distinct.
icpx could be replaced with a shell script:
exec `basename $0`/clang++ --intel "$@"
tst_qnumeric is not passing
FAIL! : tst_QNumeric::classifyF() Compared values are not the same
Actual (qFpClassify(tiny / two)): 2
Expected (FP_SUBNORMAL) : 3
Loc: [/home/tjmaciei/src/qt/qt6-icx/qtbase/tests/auto/corelib/global/qnumeric/tst_qnumeric.cpp(344)]
FAIL! : tst_QNumeric::classifyD() Compared values are not the same
Actual (qFpClassify(tiny / two)): 2
Expected (FP_SUBNORMAL) : 3
Loc: [/home/tjmaciei/src/qt/qt6-icx/qtbase/tests/auto/corelib/global/qnumeric/tst_qnumeric.cpp(344)]
FAIL! : tst_QNumeric::floatDistance(denormal) Compared values are not the same
Actual (qFloatDistance(from, stop)): 0
Expected (expectedDistance) : 4194304
Loc: [/home/tjmaciei/src/qt/qt6-icx/qtbase/tests/auto/corelib/global/qnumeric/tst_qnumeric.cpp(408)]
FAIL! : tst_QNumeric::doubleDistance(denormal) Compared values are not the same
Actual (qFloatDistance(from, stop)): 0
Expected (expectedDistance) : 2251799813685248
Loc: [/home/tjmaciei/src/qt/qt6-icx/qtbase/tests/auto/corelib/global/qnumeric/tst_qnumeric.cpp(408)]
P
Change-Id: Icb2516126f674e7b8bb3fffd16ad59431e8c3379
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Removing flags based on REGEX may include spaces, so flags might be
glued. Replace flags with spaces to keep at least one space for
the described case.
Pick-to: 6.2 6.1
Fixes: QTBUG-94400
Change-Id: Ice268da36174ef5cf4398d2aee8fcd4731336316
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qmake had support for building with clang-cl as the win32-clang-msvc mkspec.
Task-number: QTBUG-89642
Task-number: QTBUG-88081
Change-Id: I0709c289f90fedb121620d1e67ef841602219816
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
After discussion we decided to opt-out the UNICODE definintion
behavior. To disable UNICODE in user projects the
qt6_disable_unicode_defines function could be used.
Amends 5b64e5950c
[ChangeLog][CMake] Enables the UNICODE and _UNICODE definitions on
WIN32 platforms by default for all cmake projects to reflect the
qmake behavior. Use qt6_disable_unicode_defines function to disable
the default unicode definitions.
Pick-to: 6.1
Fixes: QTBUG-93895
Change-Id: Id70ff7dcf8c74f660ec851f8b950e1e3b94d9fb4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
A few configure defines get changed:
QMAKE_WASM_PTHREAD_POOL_SIZE is now QT_WASM_PTHREAD_POOL_SIZE
QMAKE_WASM_TOTAL_MEMORY is now QT_WASM_INITIAL_MEMORY
QMAKE_WASM_SOURCE_MAP_BASE is now QT_WASM_SOURCE_MAP_BASE
device-option EMSCRIPTEN_ASYNCIFY=1 is QT_EMSCRIPTEN_ASYNCIFY=1
To create source maps for debugging. use
device-option QT_WASM_SOURCE_MAP=1
Task-number: QTBUG-78647
Change-Id: If9f30cd7fb408c386d6d69b5f7b1beecf1ab44b5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The code branch for the INTERNAL argument did nothing, and we never call
qt_internal_add_linker_version_script with INTERNAL.
Change-Id: Ie369b4dac29cd1a977433ebfd662c198a3e1d0f2
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Keep the c++2a feature, but make it an alias for compatibility
purposes.
Pick-to: 6.1
Change-Id: I6f153109be84659806f1b7a57a88a187875166d8
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add internal function to cleanup compiler flags out of the
CMAKE_xxx_FLAGS_xxx variables. Use introduced interface to clear
the '/EHsc' flag for the MSVC compiler family. This adjusts the
CMake behavior to the qmake one.
Change the 'EXCEPTIONS' option handling in helper functions. Add
ability to add enabling and disabling exception flags. Previously
it was only possible to add disabling exception flags.
Fixes: QTBUG-89952
Change-Id: I60d47660a97ae9b5a1d1f4107d352c9e97890144
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
By not including ASM in the languages for which compiler flags are
adjusted, we can end up with inconsistent optimization and debug
settings between different languages. Make sure they are treated the
same.
Similarly, linker flags for MODULE target types should also have their
debugging and incremental linking flags adjusted, just like EXE and
SHARED targets. When building with MSVC, MODULE targets were having
the relevant flags stripped, but not then replaced with the desired
ones, leaving them empty in typical scenarios. This would primarily
affect plugins, which are built as MODULE rather than SHARED libraries.
Fixes: QTBUG-90237
Change-Id: I648ea74be1654d24cbecc592ce0ca4b59b2ae839
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Add '_WINDLL' definition for the MSVC compilers family.
Check the 'FEATURE_optimize_size' value before replacing compiler flags
in the qt_internal_add_optimize_full_flags function. This is required,
because Qt::Core and Qt::Gui modules lost their ability to shrink,
when selecting the appropriate build type or features.
Fixes: QTBUG-89952
Change-Id: I982c25ea84e4793b4006ead0ee516b3f3eb2a054
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Functions in QtFlagHandlingHelpers.cmake try to update the CMake cache
variables for compiler and linker flags. These were using the current
value of those variables and writing the modified ones back to the
cache every time CMake ran. If a toolchain file sets or modifies any of
these variables, that updated value is used and written back into the
cache instead of the original cache variable's value. The next time
CMake executes, the toolchain file re-applies the same change and the
variable grows longer each time with flags repeated. With Ninja, this
causes a complete rebuild every time CMake is re-run. The Android NDK
toolchain file is one example where this behavior is triggered (the
fault is shared, one could argue that the NDK should only be setting
..._INIT variables, but that's out of our control).
Another related bug in the previous implementation was that the flags
used to build after the first CMake execution could be different to
those used for all builds after the second and later CMake runs. This
is because the CMake cache was being updated, but not always the
calling scope of the functions that modified them. If a toolchain file
set any of the compiler or linker flag variables as non-cache
variables, then updating the cache variable would have no effect on
the calling scope. The non-cache variable would continue to take
precedence for that scope for that run. The next time CMake executes
though, the updated cache variable would now have been used by the
toolchain file and the change *will* be part of the non-cache
variable's value.
The above are examples of why you should try to avoid updating these
cache variables from project code. We could leave the cache alone and
always update only non-cache variables, but then a developer looking
at the cache may wonder why the values they see there don't match the
values being used in builds. Or worse, they think the cache values
are being used and don't realize the builds are using something
different. Ultimately, we have to choose which downside we are happy
to live with. The changes here preserve the previous intent of
updating the cache, but it's still a bit fragile.
Fixes: QTBUG-89821
Task-number: QTBUG-85992
Task-number: QTBUG-86866
Change-Id: I8a16753e159bde338e6d2e5dd2ce91fc8ac5c39d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
*Not* using /permissive- exposes Qt and client apps to interesting
bugs and/or build failures, (e.g. QTBUG-87225, or
19b5520abf). We demand strict
conformance by any other compiler, it's time to demand it from
MSVC too.
The Windows headers themselves are clean starting from the
Windows Fall Creators SDK (10.0.16299.0), and moreover Qt 6 will
drop WinRT; therefore, the comment in the mkspecs does not apply
any more.
Since /permissive- implies /Zc:referenceBinding, drop that
option. The other implied options are set on MSVC < 2017,
but I leave them in to avoid tinkering with the fragile lists
of C/C++ flags.
Rename the CMake internal helper function to better describe
what it does.
Fixes: QTBUG-85633
Fixes: QTBUG-85637
Fixes: QTBUG-85635
Fixes: QTBUG-88244
Change-Id: Ie03fddb61aa066fdc14b7231c22e7108b4a02fbb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
1. clang-cl doesn't support "-fno-exceptions", it uses msvc's parameter.
2. some parameters supported by msvc are not supported by clang-cl
and they are causing huge warning message flood, don't add them.
3. use correct optimize parameter for clang-cl.
Change-Id: Idbadf139127143c5fa6c49068588cb26f47da7a2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When linking static libraries, MSVC's link.exe complains about
the unknown parameter "/INCREMENTAL:NO" and output a lot of warning
messages about this. This doesn't happen when it's linking exes
or dlls.
The situation is a lot more worse when we are using clang-cl.
clang-cl will print some error message like it can't find a
file named "/INCREMENTAL:NO" and just stop compiling. It seems
clang-cl treat unknown parameters as input files.
Fixes: QTBUG-87875
Change-Id: I37ed29de082b0258e81494db54f275417ab42708
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Instead of propagating the deprecation wranings, we compiled all code
with -Ddeprecations.
Change-Id: I0233ddc85bdbdcb93d366073b2cea5d47bdbe52a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Introduce a new feature called 'FEATURE_msvc_obj_debug_info' which
should allow usage of sccache for Windows MSVC configs.
Enabling the feature will replace the default '/Zi' compile flag
that CMake sets in Windows-MSVC.cmake with '/Z7'.
This ensures that the debug info is placed into the compiled object
file instead of placing it in the compilation .pdb file via
mspdbsrv.exe.
The final pdb file will still be created for shared libraries and
executables due to the linker '/debug' flag.
Static libraries will not have a .pdb file, instead the debug info
being embeeded in the .lib file.
The downsides of using '/Z7' are more disk space usage, slower
link times, more memory used for linking because the linker needs
to deal with more symbols.
The upside is that caching each indepedent cl.exe call is possible.
This is what Chromium uses with goma, and Firefox with sccache.
We're not enabling the feature by default to allow easier
testing (and switching it off) in the CI if it proves not to be
feasible.
It will probably have to be disabled at least for building
qtwebengine due to high memory requirements.
Task-number: QTQAINFRA-3934
Change-Id: I89e0e57995e938a780be318d1faec700194aa93f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Enabling it will force usage of '-O3' flag when building Qt.
If the platform has no '-O3' flag, use '-O2' as a fallback.
Task-number: QTBUG-86866
Change-Id: If13f7de954ba5c01dc9634f06a85529828fe90a9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Introduce a bunch of helper functions to manipulate compiler
flags and linker flags for the
CMAKE_<LANG>_FLAGS_<CONFIG>
and
CMAKE_<LINK_TYPE>_LINKER_FLAGS_<CONFIG>
CMake variables.
These variables can be assigned and modified either in the cache
or for a specific subdirectory scope, which will apply the flags
only to targets in that scope.
Add qt_internal_add_optimize_full_flags() function which mimics
qmake's CONFIG += optimize_full behavior.
Calling it will force usage of the '-O3' optimization flag on supported
platforms (falling back '-O2' where not supported).
Use the function for the Core and Gui subdirectories, to enable full
optimization for the respective Qt modules as it is done in the qmake
projects.
To ensure that the global qmake-like compiler flags are assigned
eveywhere,
qt_internal_set_up_config_optimizations_like_in_qmake() needs
to be called after Qt global features like optimize_size and
optimize_full are available.
This means that qtbase and its standalone tests need some special
handling in regards to when to call that function.
Task-number: QTBUG-86866
Change-Id: Ic7ac23de0265561cb06a0ba55089b6c0d3347441
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Apparently the combination of the --no-undefined linker flag together
with ASAN when building on Linux with Clang does not work.
Disable --no-undefined flag in such a scenario. Note that linux-clang
mkspec doesn't add that flag at all, which is why asan builds work
there.
Change-Id: I6167c757ce4be5d2263311bc84e5fb445b0f7c2d
Fixes: QTBUG-86879
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This configure switch controls the feature 'optimize_size'.
This isn't merely a mapping to CMAKE_BUILD_TYPE=MinSizeRel, because
we potentially want to combine -optimize-size with -force-debug-info,
which maps to CMAKE_BUILD_CONFIG=RelWithDebInfo.
Task-number: QTBUG-85373
Change-Id: I1a9343ebc54816f52e90e9d33ea3df4c99b1ec9f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There are inconsistencies in the default optimization flags added by
CMake across configurations like Release and RelWithDebInfo.
In particular Release uses -O3, whereas RelWithDebInfo uses -O2,
as well as usage of /INCREMENTAL in release configs with MSVC, etc.
To make sure that the Qt 6 binaries built with CMake are consistent
across configs, as well as consistent with the flags we used when
building Qt 5 with qmake, add a horrible search and replace mechanism
to replaces the CMake flags with what our mkspecs indicate to use.
Ideally this would be done by providing custom CMake toolchain files
for each platform we support, and we might revisit that later if the
need really arises.
To implement the replacing, we first need the flags that should be
added. Port the QMAKE_CFLAGS_OPTIMIZE variables to CMake, which is
done in QtCompilerOptimization.cmake.
Then a new function called
qt_internal_set_up_config_optimizations_like_in_qmake will look for
any kind of optimization flags set in the
CMAKE_<LANG>_FLAGS_<CONFIG> style variables, remove them, and add
the appropriate flags that qmake mkspecs provide.
On some platforms (like Windows MSVC) the function also alters the
linker CMAKE_${TYPE}_LINKER_FLAGS_<CONFIG> style variables.
The mechanism allows opting out of this replacing by
setting the QT_USE_DEFAULT_CMAKE_OPTIMIZATION_FLAGS value.
It also allows opting into removal of flags for custom configs by
providing QT_ADDITIONAL_OPTIMIZATION_FLAG_CONFIGS. It's only removal,
because we wouldn't know what kind of config it is, and thus what
flags to add.
The currently modified configs are: Release, RelWithDebInfo,
MinSizeRel, Debug aka the usual default CMake provided ones.
The mechanism is only applied to C-like languages.
ASM is not handled to be on the safe side due to not knowing what kind
of compiler flags the platform assembler might take.
It's also important to skip RC on MSVC platforms.
Task-number: QTBUG-85992
Change-Id: I3712d5cd5a34fceab54f56a6fa46b4e678952362
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
QtBuild.cmake is huge. Split it.
Move module, plugin, tools, executables and test related functions out
of QtBuild.cmake into separate files.
Do the same for many other things too.
An additional requirement is that all the new Helpers files only
define functions and macros.
No global variable definitions are allowed, nor execution of commands
with side effects.
Some notes:
qt_install_qml_files is removed because it's dead code.
Some functions still need to be figured out, because they are
interspersed and depend on various global state assignments.
Task-number: QTBUG-86035
Change-Id: I21d79ff02eef923c202eb1000422888727cb0e2c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
