Previously the test worked because the client was the last party to know
when encryption was established. However, due to changes in the TLSv1.3
handshake the server is now the last one.
In either case, relying on both to be encrypted when one of them is
finished is not great, so now we only quit the event loop when both
client and server have emitted 'encrypted'.
Change-Id: Ic1fc75671206d866f7ea983805fd58a99657aac6
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Replace with QSignalSpy or QTRY_COMPARE when possible.
Task-number: QTBUG-63992
Change-Id: I18dc8837301424855487a12ee62451a5aeb21bf0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The formatting of the output from QSslCertificate::toText has
changed slightly from before, so it no longer matches the test's
data.
From what I can tell we just do a manual sanity check and create
a new file with the new output and then augment the test.
Task-number: QTBUG-67463
Change-Id: I751e5a3f9a28015f97c895cea47384704fd68e38
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Properly handle single protocol TLS configurations. Previously,
due to the use of generic (non version-specific) client/server method
they worked as ranges of protocols instead. This also fixes a couple
of previously broken tests.
Task-number: QTBUG-67584
Change-Id: Ied23113a4fab6b407a34c953e3bd33eab153bb67
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Except RHEL-6.6 and 7.4
It was blacklisted in f3939d943e, along
with a lot of other entries. No specifics are known about why it was
blacklisted originally, but now it only fails on RHEL because they
use OpenSSL 1.0.1.
Change-Id: I6d1d1b7b7bf5386b2115b8780163550cf03bbad7
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Commit f55c73ede2 added various backendConfig methods;
API review for 5.11 pointed out that Config should not be abbreviated.
Change-Id: I3b294b44a030b2a6e4cdd034fa27583c228dfe42
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
With this change it is possible to use all supported
configurations in different backends without any new interfaces.
Change-Id: Ib233539a970681d30ae3907258730e491f8d3531
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Apparently this (undocumented) TESTDATA feature creates resource files,
but lets you use wildcards as well, which is very handy.
The reason I didn't know/realize this when adapting the tests to use a
".qrc"-file* was because some of the test-cases were using relative
paths instead of the 'testDataDir' variable.
This commit fixes the remaining uses of relative paths, removes a
usage of QDir::setCurrent, and adapts QSslSocket to use TESTDATA.
* in now-reverted commit e1600c1a73
Change-Id: Iee6d88f1e0810eeaadac90e7d44bc6db84bfeabf
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Then we don't need to add a leading slash. (minor clean-up)
Change-Id: I86af224841009fda838e7cb89d47d324963328c9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reverts commit e1600c1a73.
The commit missed the fact that TESTDATA exists. Which supports
wildcards and then can automatically pick up new files when added (as
long as they match a wildcard) and then you don't need to maintain a
giant qrc file.
Change-Id: Ie31fadb5ef6e8dfe6105f4f9764292f78cffb512
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The reason for each is given in the skip. It's mostly about the
server-side encryption, which is unimplemented for WinRT.
Change-Id: I036b95a4526e02fd047e193f2b3c9130bec08144
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This lets the tests run on devices which previously did not have access
to the files used (WinRT, mobile devices).
Change-Id: Ibdd85862eee6ab1a7d4da87ca321ee9bc9880bfa
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... and unblacklist it.
It was blacklisted some years ago because it was failing too often.
It was failing because the ssl socket had already received and decrypted
all the data it was going to get, meaning the waitForReadyRead call was
just going to block forever.
Change-Id: Ia540735177d4e1be8696f2d752f1d7813faecfe5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The verifySessionProtocol() method in the SecureTransport backend did not
properly handle TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater.
This commit teaches verifySessionProtocol() about them.
It also adds TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater to the
protocolServerSide() test in tst_qsslsocket.
Backport from 5.10 to 5.9 (LTS).
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit 9c765522d1)
Change-Id: I58c53bdf43e0f19b4506f3696d793f657eb4dc6f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The original test was using QSslSocket::waitForEncrypted function, which
is apparently a bad idea on Windows: connecting to 'www.qt.io' we have
to verify certs and there is no guarantee a given Windows VM has the required
CA certificate ready in its cert store. In such cases we start a background
thread (aka CA fetcher's thread) and it calls a (potentially blocking for
a significant amount of time) function (CryptoAPI). When finished, this
thread reports the results via queued connection, which does not work
if we are sitting in a tiny-loop inside waitForEncrypted. Re-factor
the test to use signals/slots and a normally running event loop.
Also, the last test makes a wrong assumption about Windows - fixed.
Task-number: QTBUG-63481
Change-Id: I4abe9cda2a6c52d841ac858cccb6bf068e550cb8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
The only reason our code wants PKCS12 files is for a private key, but
a valid file needn't contain one; and reading a file without lead to a
crash in QSslKeyPrivate::fromEVP_PKEY(). So check for missing key and
fail the load, since the file is useless to us. Also ensure the
caller's pkey is initialized, as we aren't promised that
PKCS12_parse() will set it when there is no private key.
Add a test for this case (it crashes without the fix) and update the
instructions for how to generate test data to cover it also.
(Corrected the wording there, too; at the interactive prompt,
"providing no password" really provides an empty password.)
Task-number: QTBUG-62335
Change-Id: I617508b903f6d9dee40d539b7136b0be8bc2c747
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The original test is quite unfortunate - it has cipher names hardcoded,
and it fails with OpenSSL 1.1 - no matching cipher found for 'RC4-SHA'
and QSslContext::initSsl fails with 'Invalid or empty cipher list'.
We skip this test entry for 1.1.
Change-Id: I810b80a62d9e27a60db71fd412af0c80630d976c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
ASN UTCTime uses two characters to encode a year (YY). When converting it
into QDate, it's quite naive to just add 2000. According to RFC 2459,
these YY represent dates in the range [1950, 2049].
This patch also introduces a helper function doing the checked conversion
from a string to int (to be reused in the following-up patches).
Task-number: QTBUG-61934
Change-Id: I3f6f471d24e8357b83b2f5973023b2b842751389
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Several tests are not valid for 1.1 anymore:
1. SSL2 was removed, but there is no OPENSSL_NO_SSL2 and the 'protocolServerSide'
test is trying to use QSsl::SSLv2 and thus is failing.
2. We now use the generic TLS_server/client_method instead of version specific
methods we have in pre-1.1 back-end. So, for example, a client socket with
QSsl::TLS_V1_0 in its SSL configuration will be able to negotiate
TLS 1.2 if our server socket wants it, while with TLSv1_client_method
(OpenSSL < 1.1) our test was expecting SSL handshake to fail.
Change-Id: I18efd5921c79b189e4d9529be09299a361a8a81d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
As QAbstractSocket::readData does and as the documentation of QIODevice says
"this function returns -1 in those cases (that is, reading on a closed
socket..."
Change-Id: I1e64673f6a6d792a640bd6cb28b2bb5a0f18dc36
Reviewed-by: Aleix Pol
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reverts commit 96c27f0dfa.
We now use a custom keychain that should fix the original
problem with the test.
Change-Id: I52e4105f34a46ad7080750d9a62480ebe3a56e68
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The fix is outdated - the tests it was fixing - pass on 10.11.
Change-Id: I8b42c1d3d2f1279382b15c20587dcc93cf1b6b40
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Mixing different protocols on client-server sockets works differently
on 10.11, making previously successful handshakes failing now.
Failure is specific to 10.11 with SecureTransport.
Change-Id: I35374b40fa3d167802775b526cf6465ae78749cf
Task-number: QTBUG-48860
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
RFC6125 section 6.4.2 specify we need to convert the IDN to ascii
before comparison. Note that we don't need to toLower anymore
because toAce takes care of it.
Section 7.2 recommands that we dod not attempt to check for wildcard
character embedded within the A-labels or U-labels of an
internationalized domain name. So we reject names that contiains a
'*' but starts with 'xn--'.
Change-Id: Ib0830520a1f82bbf9fd11818718277a479527ee3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Replace outdated LGPL21 with LGPL license header.
Use GPL-EXCEPT for all autotests.
Also use canonical contact url.
Change-Id: I6e5cc8a4285569c4f862730a980f492b8a933a72
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
don't attempt to hand-craft a library export any more. instead, use the
configure system's built-in mechanism, and refer to it via QMAKE_USE.
this also allows us to rely on transitive dependencies in the autotest.
as a side effect, this makes the openssl-linked feature imply the
openssl one.
Change-Id: I5dd209b63bc8fbbc62852f6ffc472d4452ea2e68
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The verifySessionProtocol() method in the SecureTransport backend did not
properly handle TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater.
This commit teaches verifySessionProtocol() about them.
It also adds TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater to the
protocolServerSide() test in tst_qsslsocket.
Change-Id: I394766c75dbea4d89bf3d6b9c3f3c89530ac0749
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This commit simplifies defaultParameters() to simply construct an empty
QSslDiffieHellmanParameters and assigning the DER-form of the DH parameters
to QSslDiffieHellmanParametersPrivate's derData field.
This creates a valid QSslDiffieHellmanParameters instance, but skips any
potentially expensive verification steps.
The previous implementation of defaultParameters() would use the public
fromEncoded() method to construct an instance of the default parameters.
This triggers a verification of the passed-in data, which can be expensive.
To ensure our defaultParameters() QSslDiffieHellmanParameters instance does
pass verification, this commit adds an autotest to verify that.
Fixes QTBUG-57815.
Change-Id: I6b1d9dbbfde526b232c319195ddbad42326be27c
Task-number: QTBUG-57815
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
this actually fixes the build when ssl is not enabled, as the openssl
features are in the not included network-private module.
Change-Id: Ibafae9867af493da184a45cf3981628d475d37a6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
