This is the case for the winmain library.
Change-Id: I8f416e81ad8de4a1fb2f70a4ebc31c8351c81605
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The warning is presented now that we use __assume in every
Q_ASSERT. It presents itself in code that calls functions, like:
tools/qbitarray.h(128): warning #2261: __assume expression with side effects discarded
{ Q_ASSERT(i >= 0 && i < size());
^
Change-Id: I5851b3c35b56c00b9c541c2489233121ef621e04
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For some reference platforms and SDKs we will need to pass in
extra paths. Currently users have to modify the mkspec to adjust
paths or set environment variables that will be picked up.
This change introduces the -device <name> and -device-option
<key=value> option. The key value pairs will be written to a
qdevice.pri and can be used by the qmake.conf of the device spec.
The reason to not save the key value pairs in qconfig.pri is
becase of the fact that the device spec loads the qdevice.pri
earlier than the qconfig.pri. qdevice.pri allows the mkspec
to set the compiler flags and qconfig.pri allows configure to
add to those compiler flags.
Done-with: Holger Freyther
Change-Id: I931a197b8be72397e1eedfee09502eefc01c9d4f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Unlike QNX mkspecs, these mkspecs target more specific, BlackBerry-only
devices. So far, the only difference is the definition of Q_OS_BLACKBERRY
and linking with -lbps, but this will likely change with time. It will also
allow conditional compilation to distinguish between qnx and blackberry
devices.
Change-Id: Ia44e9b4059f720c308240e9dac7e90f7ae7920d0
Reviewed-by: Sean Harmer <sh@theharmers.co.uk>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Intel CC 12.1 supports AVX2 but only with -march=core-avx2. The -mavx2
option produces a warning.
GCC 4.6 does not recognise any option.
GCC 4.7 recognises both -mavx2 and -march=core-avx2 so let's use the
latter for now. We may need to change to -mavx2 when there's an AMD
processor that supports AVX2 too.
Change-Id: I529240e6e6c2c0e3942d357e0320212d954fe4de
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This also removes the check for SSE, but the check for SSE2 and
further technologies is kept. If SSE2 is present, then SSE is too. We
don't have any code that uses the original SSE instructions only.
Remove the CMOV detection, since we don't use that anywhere and we're
not likely to ever use them..
Change-Id: I3faf2c555ad1c007c52a54644138902f716c1fe1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
WinMain does not set MODULE, though it uses qt_module_config and
generates incomplete cmake files in the wrong locations as a result.
Change-Id: I5081a13a19469ab8cd01970a55684b8451bc79d7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Include linux.conf instead of unix.conf, so it can compile Qt Base
these days (otherwise, we get an error from wayland-scanner.prf).
Remove the outdated information from the header. The mkspec now
matches ICC 12, not 10 and there are more diagnostics we disable.
Change-Id: Ic75593759a4d53f859a9a9e919d77b5c52d01024
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
- Changed installTestHelperApp() to use OUT_PWD path to find files.
(was looking in source tree instead of build)
Change-Id: If795c17a76aebcfbbe0d4f84c5df784a255ddb19
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qmake.conf already includes the linux-arm-gnueabi-g++ configuration;
this patch does the same for the platformdefs.h header.
Change-Id: I14ee4e406e8c00ae1a57140676f60d030daba18f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When built without fontconfig support, the basic unix font database
relies on fonts installed in libs/fonts to populate the database.
Change-Id: Id1e54c5b032095470049210bb831cfe4c79b3569
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Fixes those cases where things would magically link, although they were
everything but LSB compliant.
Also fix a linker error, it seems we need to explicitly link to -lrt,
otherwise, the non-LSB compliant system lib will be taken into account.
Change-Id: I40e278f1c4d2e02084c4c5f15b9bbff8c5901d32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This variable is there for documentation, but its not being used anymore.
There are two libraries from wayland, libwayland-client and
libwayland-server. Add two variables that will be picked up in the
QtWayland module.
Change-Id: I16219092a4ed2e48080921ce39f61192b6abb711
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Doing so works fine on Linux as g++ version there silently ignores
this. However, the qcc toolchain for QNX barfs.
Change-Id: Ia236910adc09dc1653e4169e20476b69c2de62ab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
qmake uses the variable name verbatim, which makes the generated
makefile look "interesting" without this cleanup.
Change-Id: If6c4f12563a0ee6429513fbfac534f40bb7c0b97
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
this makes the "sysrootable" properties more magic, with the raw
versions being omitted from the qmake -query output and automatically
falling back to the "cooked" variant if there is no sysroot set.
this makes the "normal" qmake -query less noisy. this will become even
more obvious when i add more "overloads" of the properties.
Change-Id: I08000986427264ec6238c8fe0a77f5cecdbf1201
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This changeset allows Qt to be built for QNX platforms in light of
commit d59e85d909.
Change-Id: Idf8e89cf1b0a5625ef7ee6397c223137fa151cdc
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
syncqt may generate that file also as a result of configure tests. so
just check for the file's existence instead of trying to reproduce under
which circumstances it should appear.
Change-Id: Ia24f96b05fc70e104f7be19d08cea614ffb505be
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Follow-up to d13bedb9d8
where the regexp was a bit too tight and missed many specs.
Also cleaned up QMAKE_IDC, QMAKE_RCC and QMAKE_IDL.
Change-Id: Ia15007141739019ef5ccfdda0c856c478f732b85
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the problem this (probably) tried to solve has been solved via ordered
builds a *long* time ago.
Change-Id: I84c58076c864735eea4210ec60aa060fe3e5d97e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it seems to be a no-op. presumably it was meant to be an auto-rebuild
hack like in moc.prf, but it wasn't really "wired".
Change-Id: I914456f5f5a63a06c2004b16edcf2e2ade448270
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Renamed from blackberry-* to qnx-* in order to match he <platform>-<compiler>
pattern.
Change-Id: I378151f3d564dd280943c74865a1d2b97215b656
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
otherwise we need the nasty hack for includes, and CONFIGs and DEFINES
from dependencies are not included at all.
Change-Id: I7eaee761161a6e8fbac8e9237d26559aa11a88a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Change-Id: Ib6787f982ff962cfdf3d8a0a26989489619a57b0
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
otherwise we are breaking the "less hacky" configurations. whoops.
Change-Id: Ibb037753fbaf30beae3d30173be77d48b978b60b
Reviewed-by: Caroline Chao <caroline.chao@nokia.com>
instead of being a variable added to the makespec (via qconfig.pri),
QT_SYSROOT is now a property.
the QT_INSTALL_... properties are now automatically prefixed with the
sysroot; the raw values are available as QT_RAW_INSTALL_... - this is
expected to cause the least migration effort for existing projects.
-hostprefix and the new -hostbindir & -hostdatadir now feed the new
QT_HOST_... properties.
adapted the qmake feature files and the qtbase build system accordingly.
Change-Id: Iaa9b65bc10d9fe9c4988d620c70a8ce72177f8d4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
there is entirely no point in having it there.
Change-Id: Ie2fc1e94495119725131cbd50564648cbb4a7dc8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
moving the detection of .qmake.cache to the qmake startup had the side
effect that a suddenly popping up cache would not be picked up by
nested projects any more.
this is not supposed to work in the first place, but the syncqt hack for
building against non-installed modules relies on it. until we have
cleaned that up properly, we need a way to notify qmake about the
appearance of the cache file.
Change-Id: I450646b936e3bb2ef2ed3aba05df58e521ccdc61
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Currently only a small fraction of all the headers are included since only
the headers found in the pro file folder are included.
This is confusing and arbitrary. With this change all the headers are now
excluded from the instrumentation.
Change-Id: If4322421f3b3e5fcd45f006421690eaa6bf645e0
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This adds support for XCode 4 into qmake and also indirectly fixes a
couple of problems that are relevant for XCode 3.2 too
Task-number: QTBUG-17247
Change-Id: I722470ad1854bd740cbbd28ff4956057a0e1906b
Reviewed-by: David Forstenlechner <dforsten@gmail.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
(cherry picked from commit b5871311457ca97816c0abbb8b935570bbfb657c)
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This implements replacements for win32 makefile generators similar
to the replacement functionality in unix makefile generators.
To enable Makefile code generation for replacements in win32 makefile
generators, you must set QMAKE_STREAM_EDITOR to e.g. sed.
When building for win32, sed is normally only available in the
mingw/msys build environment and when cross compiling on unix.
In these cases QMAKE_STREAM_EDITOR is set to sed in qmake.conf.
For other win32 build environments QMAKE_STREAM_EDITOR is not set
in qmake.conf and the replacements Makefile code is not generated.
Change-Id: Ie5de5d517eafaeaa2544f1e972aec3fe11d0a6f1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This is a convenience to make it easy for applications to simply add:
CONFIG += opengles1
To their .pro file to link against OpenGL ES 1.1 instead of OpenGL ES V2
Change-Id: I48605f5f69f83d99cfb2ad6dbb4b318d41e00128
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This allows us to create correct CMake config files when Qt is
configured with directories outside of the prefix (which Qt allows),
and also allows us to use correct values when a 'longer' relative
lib directory is used such as lib/x86_64-linux-gnu.
Change-Id: I6f88255a23752dc5b84cb20ce13fdeeee9d5ad51
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
the earlier done topological sort already removes duplicates and only
works with lower-cased names anyway, so we can remove the overhead here.
Change-Id: I44fc39af9e94662717e1c8cfb0ddb87d2f597935
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's rather pointless to first query the variable's presence in the
file. instead, just fetch it and see what is in there.
for this to work cleanly we defer the concatenation of the filename.
Change-Id: I322db8ae897272fae049074d8b7676787286aedd
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The code previously exported by the declarative library has been
migrated to the qml and quick libraries, and the symbol names have been
changed accordingly. To allow existing projects to continue to build,
the declarative module now contains a set of definitions redefining the
deprecated class names to their replacement names.
To make this work, a dependency on the declarative module now
automatically adds a dependency on the qml module in order to make the
new library available for linking.
This is a temporary change to prevent breaking existing projects
that depend on the declarative module. After clients have had an
opportunity to update their code to the use the new interfaces,
it can be removed.
Task-number: QTBUG-23737
Change-Id: Idee6ac627858856802bb1be29e9a4a079da73688
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Martin Jones <martin.jones@nokia.com>
Change-Id: I6c2008a0e7a07ca0603b8aa9362d31fa4ef7310a
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: Iff8b9bdd4b069721103e1cd5854e56b6116d7549
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The fPIE flag should only be used with executables.
Change-Id: If799ae4a7fe2492af3aac67651659a52d365024a
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
and run the configure checks with the values
Change-Id: Ie8e0072c686c6a7dce1d02e25a9c1abce4679d34
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Use the standard g++ specs, just override the compiler name
Change-Id: I4adacd7204d3880155bdfc3405e20f322ad593ea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The "check" target always depended on debug-check on projects that
explicitly loaded the testcase.prf, even if Qt was configured with
-release parameter. This obviously caused build failure. Changed the
testcase.prf to check which configuration is preferred using
CONFIG(debug, debug|release) like is done with similar cases in other
.prf files.
Task-number: QTBUG-24332
Change-Id: Ib5140b106e99efe51932bdd5a48914786de23230
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The architecture is detected at compile time based on the predefined
macros from the compiler. Don't use QT_ARCH in .pro, .pri, or .prf
files. The PNG_NO_ASSEMBLER_CODE define from libpng.pri is not present
in the current copy of src/3rdparty/libpng, so no change in
functionality is expected.
The conditional for the SUPPORT_JIT define in pcre.pri is moved to
src/3rdparty/pcre/config.h, again so that we can use the compiler's
predefined macros to detect the architecture at compile time.
Replace QT_ARCH_ARM, QT_ARCH_MIPS, and QT_ARCH_SPARC with their
Q_PROCESSOR_* equivalents.
Replace QT_ARCH_INTEGRITY, QT_ARCH_VXWORKS, and QT_ARCH_WINDOWSCE with
their Q_OS_* equivalents.
Note that this commit also effectively disables the SPARC atomic
implementation. An inline implementation for SPARC needs to be added,
or we remove the current code and instead rely on the GCC intrinsic or
C++11 std::atomic support on SPARC.
Note also that this commit does not remove QT_ARCH from configure or
qconfig.h. This will continue to be set until all Qt 5 projects can be
moved away from using QT_ARCH.
Change-Id: I5de747cc4436d21941329974cff3016970f497b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
It was causing issues when cross-compiling with a sysroot, as the paths
were not prefixed with the sysroot. The right include paths should be
taken care of by pkgconfig anyways.
Change-Id: I2cf7bf6377c88e6bf3b015100444d082530337ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the new QMAKE_SUBSTITUTES.config = vebatim feature.
Change-Id: I4c08bd4694c11d48434eb225fc6902e69a4cdec2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Qt requires this since 482d96a0c5
Change-Id: Iba783e283b17654abf46f11b81cc1641c3ce7d83
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Simply include the generic arm-gnueabi configuration. This should work
from within and outside sbox, but at the same time keeping this mkspec
allows us to enable Harmattan specific features such as the xinput2/touch
support in the xcb back-end.
Change-Id: I5cc0cdc3e222deb6374580392c3e3aadfc3a4bd9
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@nokia.com>
Put in qconfig.h whether qt is compiled with reduced relocations.
When using -Bsymbolic-functions (enabled by default on Qt)
but not -fPIE, the comparison of the function pointers fail
because the addresses are different in Qt, and in the executable.
Hence we now enable -fPIE by default on qmake, and force a compilation
error when it is not enabled and built with reduced relocations.
Done-with: Sune Vuorela <sune@vuorela.dk>
Change-Id: Ib3fdba06fab6e8a93b75b4c6cf16cc973ab335db
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QtUITools is a static library, so we need to mark that in its
CMakeConfig.cmake file.
Change-Id: I4e3684f7c62f4af28956a6e8f58edce7724f50dd
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This commit adds basic gesture support to WEC7 Qt builds, which
enables developer to create custom gesture recognizers based on mouse
events.
Note that QTouchEvents are not yet generated in WEC7 Qt builds, so
recognizers based on those cannot be created.
Task-number: QTBUG-22517
Change-Id: Ic6218500b28b78ca8edec3edebd00d84c308a182
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Handle the case of an empty DESTDIR.
(cherry picked from commit 122fa6b53c33364a4687919191e55899acb43797)
Change-Id: I0c2eec5736d0944b8ee97abdfa3f1121e7d8db4b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Unlike for libraries, $(TARGET) already contains $(DESTDIR).
Changing to $(DESTDIR) does break the command in that case.
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
(cherry picked from commit 7eb770aed35fee50ff98c12e390dcb02c72b5132)
Change-Id: Idd0f30d52db432062917a1c956c3af73e6c8a6a4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
- Always use <qt_windows.h> as the last file to be included.
- Remove it from some headers, use Qt::HANDLE instead of HANDLE.
- Clean up #ifdef, use Q_OS_WIN for Windows/Windows CE.
- Add NOMINMAX to qt_windows.h to avoid problems with the
min/max macros.
- Remove <windows.h> from qplatformdefs.h (VS2005)
Change-Id: Ic44e2cb3eafce38e1ad645c3bf85745439398e50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The tiff plugin and bundled libtiff is moving to the qtimageformats
project on Gerrit.
Task-number: QTBUG-23887
Change-Id: I4c848232fdccddd7e7f54215f9eaa78dc4c3a53d
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Change-Id: I330702f197c8b558f0a00b90f5e147dbef731abd
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
mkspecs for QNX qcc, armv7le and x86 targets
Change-Id: Ie4b0ec46a8837ad63f5aea8429cfdd516531e09a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Support cross-compiling for x86 and x86_64 nacl.
Change-Id: I652702f9671b35963450c42dac5e27bedc698df0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The MNG file format is generally abandoned, and libmng has been
unmaintained for several years.
The MNG plugin and bundled libmng has been moved to the
qtimageformats project on Gerrit.
Task-number: QTBUG-21869
Change-Id: I946432347014ffde2b72307a5f8b166ca5553602
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Qtopia was killed some time ago and these files do not have a direct
use. Qt was embedded into the Qtopia sourcetree and it would be in the
hands of the Qt Extended fork to move to Qt5 and update the buildsystem.
It is unlikely that a Qt5 qmake will be used to build the Qt extended fork
as a copy of Qt is embedded in the source tree.
Change-Id: I2ef309c381aaf1d265ef385e85fd5c72d6205765
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When Qt is configured for static build, importing static plugins is
supposed to work as described in docs:
http://doc.qt.nokia.com/latest/qtplugin.html#Q_IMPORT_PLUGIN
This commit updates the qmake mapping for predefined Qt plugins, so
that Qt plugins are automatically found when QTPLUGIN keyword is used.
Task-number: QTBUG-18609
Merge-request: 1391
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
(cherry picked from commit 0d0c1082f74888044713d96deca2d510951d018a)
Change-Id: I0d0c1082f74888044713d96deca2d510951d018a
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The plan is to make it the default mkspec for Qt 5 on Mac OS X.
Change-Id: I49cf619a06fd7155dfbddc377558327b4be09cef
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
When set in configure it would be written to .qmake.cache and would only
apply when building Qt. We then had an override (that was also out of
sync, version-wise) in the g++ mkspec, which would also apply to apps
building agains Qt. This override did howerver not apply when using
the Clang mkspec.
We now move setting macosx-version-min to the common macx mkspec, shared
by both g++ and Clang, which will apply both when building Qt and when
building something against Qt. The latter since an application built
against Qt will not deploy on versions of Mac OS earlier than 10.6
anyways, so we might as well always set the minimum-version.
The modifications to the mkspecs will result in macosx-version-min
being passed twice when compiling qmake, as configure writes its own
makefiles and the mkspec parsing in configure has a bug where it will
lazily evaluate qmake-variables instead of evaluating them inline. This
is not a problem, and can be fixed in a later patch if seen fit.
Change-Id: Ib29503ad00a9dc00e0a50b0dbd9459e89a20dfbd
Reviewed-by: Zeno Albisser <zeno.albisser@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This reverts commit 613183ff8c
("Automatically add QtQuick module if only QtDeclarative is specified").
The QtQuick module has been around for a while now, and the need to
port to it has been duly announced.
After this commit, projects that use the QtQuick 2 API (QQuickItem
and friends) will explicitly have to add QT += quick.
Change-Id: Ie5e6d438431a0c736e214c28c0d1ba1189b4ee06
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Change 1fb5600c5e already added
declarative-debug as a way to include declarative, but nowadays
there's also qquick, and qquick-private ...
Just always set the define. The user has choosen to write
CONFIG+=declarative_debug in the first place and an additional
define if declarative isn't used does no harm.
Change-Id: Ica6142e70b12950fc1d9e0bf7b94f747c843a17f
Reviewed-by: Michael Brasser <michael.brasser@nokia.com>
4.6 becomes the minimum required version in Qt 5.
This commit follows f6c61d13a3.
Change-Id: I151cd5ae63f076c4aa766bc5c9b9fb4d8fcd4f79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
- All subprograms installed as part of test instead of separate installs
- Added installTestHelperApp() to testcase.prf
Change-Id: I02fbbb299f095054c9216ad0e5f91f574fb0fe3d
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Change-Id: I4a7b96d33417a15d79f3932ced91bee58915c83f
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The previous change missed some headers from years prior to 2011, and a
few new files were merged after the previous change.
Change-Id: Ib7d1a2b7062228c2a5373da64242b2ee1f0981e1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Most autotest .pro files should look like this:
CONFIG += testcase
TARGET = tst_something
QT = core testlib
SOURCES = tst_something.cpp
Change-Id: I051b230c5c4fd56dc6eae2b9b7bdff6c033248fd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Change-Id: I3864017df6fc0daeb31b389c8883401d344730bf
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Remove the (-no)-qt3support options from configure, and remove the last
remaining references to Qt3Support, QT3_SUPPORT, and
QEvent::ChildInserted.
The compatibilityChildInsertEvents() tests in tst_QObject and
tst_QWidget have been renamed to childEvents(), which is a more
appropriate name.
Change-Id: Id0b45e9b177efcc8dceee8c9ed8afafedeeace2f
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Allows the extras file to contain references to the target.
Change-Id: I47332c4efcb7ba0132509a41fa3040531cd1c81f
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
On Windows, qmake searches for and uses the highest numbered available
version of each requested library, or a version with no number if no
libraries were found. This meant that qmaking a library's consumer
before qmaking the library itself could result in the consumer
incorrectly attempting to link against $${LIB}.lib rather than the
correct $${LIB}5.lib (for example).
QMAKE_$${LIB}_VERSION_OVERRIDE is the way to work around this.
Previously, a hardcoded list of libraries had version overrides set up
on Windows, but the qmake order issue affects all libraries, not just
these. Therefore, handle it for all modules.
Change-Id: I83b4646e3819f525193d1fc065b0d0e65b3be99f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
These are no longer used. Qt 3.x used them to enable thread support
(which was optional at the time), but starting with 4.0, thread support
is always enabled, and these defines were removed from the code.
Change-Id: I4d1c75171c263383fc055d2a7fe52ca0501acd7a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Change-Id: I8f6795f1d40983af0478270f33ab1c06abe67133
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QtQuick and related APIs (QQuickItem, SceneGraph, et al), which
used to live in the QtDeclarative module, have moved to a new
module, QtQuick.
Existing projects that use QtQuick-specific APIs should add "quick"
to their project's QT variable, and update their include statements.
E.g.,
QT += declarative
should be changed to
QT += declarative quick
and
#include <QtDeclarative/qquickitem.h>
should be changed to
#include <QtQuick/qquickitem.h>
and similarly for the other QtQuick classes.
In order to give existing projects a chance to migrate smoothly, we
should issue a warning and automatically add the QtQuick module if
only the QtDeclarative module was specified. (If a project doesn't
use any QtQuick APIs, the warning can be ignored -- but there is no
way to disable it.)
This change, along with the compatibility headers in QtDeclarative,
make it possible to build existing projects without any modifications
on the project's side.
This change will be removed at a later time; when that happens,
existing projects that did not port to the QtQuick module will no
longer build.
Change-Id: I56abcadc1e5c74490527fc03646310d801bfc084
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
As it was in Qt4 and discussed on the cmake list.
Change-Id: Ide77c2525a261a5d658d7cb661010a67d3386341
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This includes a BSD licenced file Qt5CoreMacros.cmake which is
adapted from Qt4Macros.cmake in the CMake source tree.
Change-Id: I54326b808795535490a0489659b351a8da72cdbb
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
And enable this configuration option for the resource compiler. This
results in a re-run of qmake whenever you touch a qrc file, which is
needed to keep the dependencies up to date. Otherwise you might end
up in the situation where you add a file to a qrc, edit the file some
time later, but a rebuild does not regenerate a cpp file and compile
that, so the final binary is stale.
Technically this dependency problem is present for all source files,
and qrc files are no different than any cpp file that you add a new
header #include to, or adding a Q_OBJECT macro to a header. To pick
up these changes we have to re-run qmake, so that qmake can run its
internal dependency checking, and any extra compiler dependency
commands.
The reason we're making this change for rcc files it that conceptually
people treat them as a "project" files, and expect them to behave similarly
to .pro or .pri files, in that editing the file will invalidate the
makefile. In practice this is often what happens when adding new
headers, as you touch the project file when changing the HEADERS
variable.
Task-number: QTBUG-13334
Change-Id: If69149678e7fba6d812d31dcc17877427f9a6122
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Support the common construct of a top-level test directory having
a test/test.pro with:
TARGET = ../tst_sometest
TESTDATA = ../data1.txt ../data2.txt
Prior to this change, the ".." in TESTDATA would cause the data to
break out of the test's installation directory.
Change-Id: I22860bf3a148f278b3f4e18b476fd151f7f0f775
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Debug snapshots and release snapshots aren't compatible. Both a
debug version and release version of the mkv8snapshot tool must be
built, and the corresponding executable selected when building v8.
Adopt the library naming convention for naming the mkv8snapshot
executable ("mkv8snapshot" in release, "mkv8snapshot_debug" in debug
on Mac, "mkv8snapshotd" in debug on Windows).
Change-Id: I7a94b09e7db7ed8bbaa293637c092a1d1d1dbaba
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This variable was renamed from `elem' to `file' at some point in
development, but the old name was left at one place.
Change-Id: I2cda42b02a753614176b466e507e8d8d9ed80a6e
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Tests will install under $$[QT_INSTALL_TESTS].
TESTDATA may be used to install additional testdata required by the
test.
The default install rule may be disabled by
CONFIG+=no_testcase_installs.
Change-Id: I204de60c8e844775906ffd016ca50bffbb414142
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
gcc 4.6 becomes the minimum required version in Qt 5.
See also d4150975af620e2889cc58bd476bac6b4d101db3
in Qt 4.8.
Change-Id: If66ce0be755263c20b0a4371523c6590592d962d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
First, #ifdef'ed out getpwuid_r() and getpwgid_r() usage since users/groups support is not in in single-process Posix mode.
Also, correct a typo and add missing files to io.pri.
Update documentation to disable libtiff which won't compile until ibtiff itself is updated, and add back -no-exceptions in the sample command line. And add a line to compile host tools.
Add a dummy QT_OPEN_LARGEFILE definition in qplatformdefs.h since there is code that requires it.
Move definition of getGlyph() after the definition of qHash(GlyphAndSubPixelPosition).
Merge-request: 2686
Reviewed-by: ossi
(cherry picked from commit 8fe04a14b1f3688c9ce0933ebec0c28616595d93)
Change-Id: I8fe04a14b1f3688c9ce0933ebec0c28616595d93
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This feature is only available to advanced qmake clients who have their
own defaults_pre.prf, where QMAKE_SYNCQT_OUTDIR is set before loading
Qt's own default_pre.
This is useful to be able to put the sync.profile file in a different
level in the source tree than where you want the output in the build
tree.
An alternate/complimenting solution would be to allow the output path
to be overriden from within the sync.profile file.
Change-Id: I3cdef82dbe492877507e269e18571456beeb2b7d
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
If subdir.CONFIG contains no_check_target, we do not recurse into
that subdir when generating the 'check' target.
This will be used to selectively disable crashing tests on Mac OS X.
Currently, all autotests are disabled on Mac OS X. The goal is to re-
enable them, but not all at once. This approach allows us to get each
change through the CI system individually.
The first step is get all tests to build, but not run, then we will
re-enable the tests for each module, possibly disabling individual
tests at the same time.
Change-Id: I69f62c238f381ae0315d414cd71d76bc88b088dd
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
To instrument a Qt application or library with the TestCocoon coverage
tool, do `CONFIG+=testcocoon' in the application .pro file.
To instrument Qt itself with testcocoon, use the `-testcocoon' configure
option.
Change-Id: Ie77109a078d11ea51f7a073621e0df9c752c44ae
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The QMAKE_COMPILER_DEFINES are used when running moc. In some cases, Qt
checks the __GNUC__ value to determine which version of GCC is being
used. In particular, the qtconcurrentfilter and qtconcurrentmap tests
fail to compile because moc ends up defining QT_NO_CONCURRENT_FILTER and
QT_NO_CONCURRENT_MAP since the condition __GNUC__ < 4 evaluates to true.
The Mac OS X development tools have not used gcc 3.x is a very long
time. The current version ships with llvm-gcc-4.2.1 and clang (which
also masquerades as gcc 4.2.1). Defining __GNUC__=4 makes sure that moc
preprocesses headers in the same way the compiler does.
Change-Id: Ie491d3f5b074fd1a509ffe6755f3308836817b6c
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
We have the following scenario: Either you build a release package
without asserts, or a debug package with asserts. However, in embedded
development, we need asserts also in release packages. This flag allows
you to build a release package, but Q_ASSERTs still fire.
Change-Id: Icd1dd4dd63c3cafecf515b40741263d902ad42d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Extension .a for Mac and Linux and .lib for Windows.
Change-Id: I1e979b2a6b29eeab35620aa0bbabb27f10cdda68
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
TARGET_BASEPATH becomes QMAKE_RESOLVED_TARGET.
QMAKE_RESOLVED_TARGET will be reused for future implementation
of code coverage tool TestCocoon.
Creating of resolve_target.prf.
Clean unused "unset(SYMBOLFILENAME)" in default_post.prf.
Change-Id: I054efb0065fa06697b60ac60a9ddf364f2f40366
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This reverts commit ec41d27565ed0b4d517f30563def135d0b4c7a8d.
Adding the define _BIND_TO_CURRENT_VCLIBS_VERSION led to linking problems
for several people. Also, this leads to problems when using the binary
installer for development.
Change-Id: I4097c8d0962c633bab6edbb86df9046d93148cab
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Clean up and remove Symbian specific mkspec.
Change-Id: I0fa75287720db92983422611e0090301d06814ec
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Both $$OUT_PWD and $$PWD can't be used here, the real .pro directory
should be $$_PRO_FILE_PWD_
Task-number:QTBUG-22169
Change-Id: I0aebfe7503703fe2b264c7c47b828a8fc4ffac47
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QT+=<foo>-private is supposed to be a superset of QT+=<foo>.
declarative_debug.prf was subtly breaking this for the
declarative-private case.
Change-Id: Ica082b03d19e702434b90e0f8b2c1fa6b592babb
Reviewed-on: http://codereview.qt-project.org/6373
Sanity-Review: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Michael Brasser <michael.brasser@nokia.com>
QtDeclarative doesn't link against QtOpenGL anymore.
This line was implicitly causing the QtWidgets library
to get linked in as well.
Change-Id: I56e6e9db52eec7fc924506bfeb4b7931ea04e616
Reviewed-on: http://codereview.qt-project.org/5204
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This restores the forced-vs-detection logic for Qt frameworks which
was removed by commit ceed409b40.
The problem of linking against Qt modules compiled as a static
library is solved a different way: the module must explicitly state
in the module .pri file that it is built as a static lib.
Change-Id: Ie3d726f7b3933e5b5d27f15c6112ec1c7dee1ea2
Reviewed-on: http://codereview.qt-project.org/5034
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
If qtbase was configured to build both debug and release versions of
libraries, it makes sense for any modules we are building to do the
same by default.
Change-Id: Idb5f78a7414b6ed2bacf295ad01f259fca435410
Reviewed-on: http://codereview.qt-project.org/4702
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Add support for DEFINES and INCLUDEPATH to link_pkgconfig so moc uses
the cflags properly.
Task-number: QTBUG-19922
Merge-request: 2674
Reviewed-by: ossi
(cherry picked from commit 2a1e82452a192c88bcf0250f5976492f6dc3b65f)
Change-Id: I0cf543c26780ab9d6d39450435e2c1947fee3954
Reviewed-on: http://codereview.qt-project.org/4592
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
qmake now needs library prefix and extension to be supplied. This was
added to plain win32-g++ in dbbf06e. Now added to win32-g++-cross.
Without this, static libraries get named 'X.lib' instead of 'libX.a'.
Merge-request: 1283
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
(cherry picked from commit 8ce9dc02cd5031f26c7fec10484a8c47904c46f5)
Change-Id: Ic12f655bcfc8a422a98819904ec796d896de77f5
Reviewed-on: http://codereview.qt-project.org/4575
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
there is no need to disable stack protector unless one uses an ancient
version of gcc.
taken from kubuntu.
(cherry picked from commit 30211e6847007bf375f60f62f5806b05cec810c3)
Change-Id: Idd74823176a63002cc0f6511adc6a981bef79df9
Reviewed-on: http://codereview.qt-project.org/4571
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Now mkspecs/unsupported/macx-clang/qplatformdefs.h includes
mkspecs/common/mac/qplatformdefs.h.
This patch fixes that Qt built with clang failes to load cocoa platform
plugin without QT_QPA_PLATFORM environment variable.
Change-Id: Id48268eaf7ba24403f91497539ef0dab6f22a9dc
Reviewed-on: http://codereview.qt-project.org/4564
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The "force framework/no-framework" logic does not
really work, since Qt is now a mix of frameworks
and statics libs. Remove this code path and use
the "detection" path instead.
Also remove the exports from platformsupport.
Change-Id: I0a308666480445eb47c4f443ff7529addecad10d
Reviewed-on: http://codereview.qt.nokia.com/3464
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
separate_debug_info was previously stored in .qmake.cache, and
therefore only affected qtbase. Store it as a QT_CONFIG setting instead,
and add it to CONFIG for all Qt plugins and modules.
Change-Id: I940c8cb30f1c42c85f4d0342e6a482f20677ff04
Reviewed-on: http://codereview.qt.nokia.com/2975
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
If the compilation of a subdir was explicitly disabled by default, then
the testing of that subdir should also be disabled by default.
Change-Id: I928e232393e89a7c27813b7a48864d4e0fb687f8
Reviewed-on: http://codereview.qt.nokia.com/2835
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This replaces the need for applications to explicitly make a call to
enable the debug services, and rather does it in declarative.h when the
'declarative_debug' CONFIG option is used.
Done-with: Kai Koehne
Reviewed-by: Martin Jones
Reviewed-by: Michael Brasser
(cherry-picked from commit 5517cc588c39814530b8bfd957821f55be42acf2)
Change-Id: If180d2b826879d6d02c7be4d3075917815ccf349
Reviewed-on: http://codereview.qt.nokia.com/2435
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Martin Jones <martin.jones@nokia.com>
An extra script is added (qtmodule-configtests) which is currently
invoked from syncqt (with some derived parameters passed to it).
The module can optionally have an entry in the module's sync.profile
file in the form of a perl map of "test name" => parameters. Tests
can print an advisory message if they fail (e.g. "Install this
SDK/dev package"), or abort the syncqt process (e.g. mandatory
prereq missing). Also, if the test has a "requires(foo)" line
that results in it being skipped, this is also supported.
Change-Id: Ic3c820a488a0992c944994d4d7dc283da36742d6
Reviewed-on: http://codereview.qt.nokia.com/928
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sarah Jane Smith <sarah.j.smith@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Their paths may vary depending on configuration and
build/install state going forward.
Change-Id: I60c8bcd1dc6c2fb729bf84d211875a3d910d5e4a
Reviewed-on: http://codereview.qt.nokia.com/1761
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
In debug_and_release builds, we have three passes, the glue
pass, and a pass for each build type. We only need to run
syncqt when we are in a glue pass, which is when
'build_pass' is not set. In non-debug_and_release builds,
build_pass is never set, so this condition works for all
build types, with multiple configurations or not.
Change-Id: I191da0df3ad422bb5fb8994391c2b2d2e23efc32
Reviewed-on: http://codereview.qt.nokia.com/1717
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
... and re-add a real $$resolve_depends(), just in case.
Change-Id: I489d6056546340ce95280fe7fd571e30c14470e7
Reviewed-on: http://codereview.qt.nokia.com/1455
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this is braindead, but it's consistent with the rest of qmake and more
performant. and the argument error message claimed it already anyway.
Change-Id: I973368acc6ffbff17107085ccd68b0334cc3e681
Reviewed-on: http://codereview.qt.nokia.com/1436
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Remove some generated files that got submitted
accidentally during the last merge.
Change-Id: I693b451f7175e50ed9d5a7c7ed85705fb764c5e8
Reviewed-on: http://codereview.qt.nokia.com/1290
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oliver Wolff <oliver.wolff@nokia.com>
This will make projects generated by visual studio being successfully
linked to the Qt dlls if they use the QString::fromWCharArray() or
QString::toWCharArray() methods.
Change-Id: Ie266576c1bcd44cf8534f12b10629b94ef3e1d3f
Merge-request: 727
Reviewed-on: http://codereview.qt.nokia.com/772
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
-Wl,-rpath-link is expected to work for all gcc except mac.
Change-Id: I4b57e0088db49a8e35840d981e5d6edbb1012396
Reviewed-on: http://codereview.qt.nokia.com/506
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When the build directory is the install directory, separate modules
should use qtbase as the path for libs, module pris etc.
This fixes the logic in default_pre.prf so that syncqt is called
correctly in these cases.
Change-Id: Ib3798bfd145d3a3e43b9a222af46270245e6c2e6
Reviewed-on: http://codereview.qt.nokia.com/464
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Reviewed-by: Eckhart Koppen <eckhart.koppen@nokia.com>
QtPlatformSupport is a static library. Platform plugins are meant to
link against this library to pull in dependencies such as fontengines
and convenience functions for finding the right GL configs. The linker
will only pull in the symbols used, so the size of the library doesn't
really matter
Not having load(qt_module) first in a .pro file which later
does a load(qt_module_config) will likely overwrite
compiler/linker options in the .pro file.
This can be hard to figure out, and wasn't required before
when we used a global .qmake.cache for all modules, since
it 'preloaded' qmodule.pri file for all .pro files.
Change-Id: I8a9aa3247f938be0b3b13f8c8cc96c18a142ba7b
Reviewed-on: http://codereview.qt.nokia.com/412
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
It can be hidden with -silent, however.
Change-Id: I6dbd3c743779b8d2070e41f007df26b530987429
Reviewed-on: http://codereview.qt.nokia.com/235
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Liang Qi <liang.qi@nokia.com>
This enables external modules to also make use of them without having
access to the complete QtBase source code.
Change-Id: I056e45cba6c6798b76670b8d238dadb2d9f9c092
Task: QTBUG-19585
Reviewed-on: http://codereview.qt.nokia.com/234
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
We use syncqt to generate .qmake.cache also for submodules, which
contains the location of forwarding module profiles for that module.
This enables us to build without having to put module profiles into
mkspecs/modules until install time.
Also added support for -developer-build to syncqt.
What it does is to point build directories for binaries and
libraries to a common location in QtBase. This is more
convenient when doing development, since you don't need to set your
path to every module's bin/ directory, but it cannot be used with
release builds, since they need to build independently of QtBase,
in their own directory.
Change-Id: I959c62c11c644f2147a98da894a72452d9c44327
Task: QTBUG-19585
Task: QTBUG-19583
Reviewed-on: http://codereview.qt.nokia.com/232
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Also introduced the QMAKE_EXTRA_MODULE_FORWARDS for specifying a
folder where forwarding profiles will be put.
Change-Id: I8cb242838a5a4d42dc5e3cfd0bd858ab0d2696cd
Task: QTBUG-19585
Reviewed-on: http://codereview.qt.nokia.com/230
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This enables other modules to use it without having access to the
QtBase sources.
Change-Id: I0a588b2e14ca88fa068c7c2bcc69ff669444f6c6
Task: QTBUG-19585
Reviewed-on: http://codereview.qt.nokia.com/237
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qmltest is now a Qt module, so it's not necessary to configure
the include&library paths manually.
Change-Id: I1d2baa67138e08ab9007fba9f6adcf8847509ba8
Reviewed-on: http://codereview.qt.nokia.com/163
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
In modularization QT+=uilib adds the QtCore specific include/QtDesigner,
while QT += designer adds the QtTools specific one.
Using !isEmpty(QT.<module/library>.name) is the proper way to check for
module/library existance in modularized Qt.
Change-Id: If1fe5d192129fd1cdbf43183b52327d7fa9c57ec
Reviewed-on: http://codereview.qt.nokia.com/126
Reviewed-by: Oliver Wolff <oliver.wolff@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
If the user has set QTDIR to something other than the location of the
qtbase build directory, syncqt will fail.
This change prevents the build from continuing. Ideally, the system
should ignore the user-set QTDIR value or give an appropriate error.
Reviewed-by: Rohan McGovern
Marking a test with CONFIG+=insignificant_test will cause the exit code
of the test to be discarded during `make check'. This is intended to be
used for tests which are valuable to run, but are known to be unstable
and are not feasible to immediately fix.
Reviewed-by: Jason McDonald
Change-Id: I50a712c33c2ebb0af39f1ea0bf2adef7f0936425
Bring it to the same level as linux-g++:
- copy the defines from common/linux.conf
- use the common gcc/g++ .conf files
- keep the trick of linking the pthread library everywhere
- leave out the wayland variables, which are not useful for Hurd
Merge-request: 1219
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
(cherry picked from commit 027605f67f73c8021c1ae604adad298599785a79)
To use the Symbian App Booster, a registration file (matching the
filename of the executable, eg helloworld.applite) must be copied to the
import folder within QtAppBooster's private directory. The appropriate
library (qdeclarativebooster) must also be linked against. With this
change, the required actions are carried out by adding
"CONFIG += symbian_appbooster" to the application's .pro file.
Task-number: QT-4892
Reviewed-by: Miikka Heikkinen
(cherry picked from commit ae128aef03d246c9f89bed015092b1c5a925bcbc)
Temp directory for packagaging got created to system root if
OBJECTS_DIR was empty. Fixed it to use '.' instead in those cases.
Reviewed-by: Janne Koskinen
(cherry picked from commit 930db5826ff2c02d54f2851494000c5fab97da54)
This will allow us to expose private headers in a controlled manner,
and ensure that they are not used by accident. This also means that
we internally will have to enable the private headers for the
modules we wish to use in the project.
When building Qt, qmake should not pull in mkspecs from an installed
version, as this will lead to incorrect paths for the current build.
So, here we ensure only to pull in modules from there we detected the
qconfig.pri, and ensure we still handle the QMAKEPATH case used by
some.
