We use global object to store errors found by q_X509Callback.
Thus, we also use a lock/mutex. It would appear all tests
involving in-process server and QNAM are prone to intermittent
failures on our Windows VMs - it's always about timeouts due
to the client socket (QNAM) locking and the server socket blocking
main thread while trying to acquire the same lock.
The real fix is to get rid of global variable/locking, we'll
have it later (quite a change and requires a lot of accuracy).
Task-number: QTBUG-76247
Change-Id: Iffc90d9e16783f17f62e836e01c35f22681bdd39
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit 91ab70d17f)
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Fix test for systems that do not resolve their hostname to localhost.
Not using name resolution also makes the test more robust.
Change-Id: I558b9a975b9021536709db87fbf6a3b314f7ca79
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... except where they are actually the component under test.
Java-style iterators are scheduled for deprecation.
Change-Id: If4399f7f74c5ffc0f7e65205e422edfa1d908ee8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We use global object to store errors found by q_X509Callback.
Thus, we also use a lock/mutex. It would appear all tests
involving in-process server and QNAM are prone to intermittent
failures on our Windows VMs - it's always about timeouts due
to the client socket (QNAM) locking and the server socket blocking
main thread while trying to acquire the same lock.
The real fix is to get rid of global variable/locking, we'll
have it later (quite a change and requires a lot of accuracy).
Task-number: QTBUG-76247
Change-Id: Iffc90d9e16783f17f62e836e01c35f22681bdd39
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
'accept' breaks the order, making the static table unsorted and thus
std::lower_bound cannot find it and we always index it in a dynamic
table. Also, make this static table accessible to auto-test.
Plus fix some warnings quite annoyingly visible in qt-creator.
Fixes: QTBUG-74161
Change-Id: I47410f2ef974ac92797c9804aa55cb5c36a436c4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
1. Fix erroneous logic, which was triggered in 'h2' mode (non-TLS connection)
- after the initial protocol upgrade/POST request was handled, the server
(on Windows specifically) was erroneously handling upcoming DATA frames by replying
with another redirect response.
2. Make the test less heavy by sending 1 MB of Qt::Uninitialize instead of 10 MB
- theoretically this could cause a timeout before the redirected request finished
successfully.
Task-number: QTBUG-73873
Change-Id: I961e0a5f50252988edd46d0e73baf96ee22eef3f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
[ChangeLog][QtNetwork][SSL] The Schannel backend now supports ALPN and
thus HTTP/2.
Change-Id: I1819a936ec3c9e0118b9dad12681f791262d4db2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
On Windows and macOS, the containers are deployed into a virtual
machine using the host network. All the containers share the same
hostname (qt-test-server), and they are connected to the same network
domain (local).
When running test in such platforms, use the single-name SSL certificate
(qt-test-server.local) for SSL related tests.
Change-Id: Idf33e01e8dd8814510d848b87b59b5fc0edc903e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The tests of smb protocol only work in the CI network. Therefore,
the docker-based test server for Windows can't pass all the tests of
QNetworkReply.
These two tests should be reworked when adding Samba server to the
docker-based test servers later on.
Task-number: QTBUG-72861
Change-Id: I54e639b5414760ee929d0d28fe10f9e021aff7dc
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Some tests were fixed and others were skipped/blacklisted.
Task-number: QTBUG-63152
Change-Id: Ica7df555f8d152ee589865911130525101d4b941
Reviewed-by: Liang Qi <liang.qi@qt.io>
The test fails in a few cases due to the simplistic internal
implementation of TLD-checking, but it's still useful to run the tests.
Change-Id: Idafaed13506fbac2e67b1d2ba72da2f0c4e2904c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When the connection has been encrypted we will,
in QHttpNetworkConnectionChannel::_q_encrypted, emit 'reply->encrypted'
in which user slots can be called.
In the event that the user calls abort it will, however, not abort until
the next time it goes back to the event loop (which might not happen
until after the request has already been sent).
Task-number: QTBUG-65960
Change-Id: I96865f83c47f89deb9f644c86a71948dbb0ec0d0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This change frees the tests of their dependence on the Qt internal test
server (qt-test-server.qt-test-net). It makes the developers run the
tests out of Qt testing infrastructure.
If the user has installed Docker engine on their host, the test servers
will be built up inside separate Docker containers, and then, the test
case goes with the Docker-based test servers. Otherwise, the test case
will keep using the Qt internal test server.
Task-number: QTQAINFRA-1686
Change-Id: I518bc3675bfd658938509744b0e7e0610bc8bf66
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This only enables compilation, it doesn't fix any test.
Qt on Android supports process, but not TEST_HELPER_INSTALLS. See also
acdd57cb for winrt.
android-ndk-r10e is used to compile, see
http://doc-snapshots.qt.io/qt5-5.11/androidgs.html .
corelib/io/{qdir,qresourceengine} need to be fixed later.
Done-with: Frederik Gladhorn <frederik.gladhorn@qt.io>
Done-with: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: I34b924c8ae5d46d6835b8f0a6606450920f4423b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
It was the same in all test rows, so move it from the _data() to a
fixed value in the test. Also, don't implicitly coerce C-string
literals to QString.
Change-Id: Ieee4c7ffbf251c4b69b5acd79125dfa93eb51d6e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Unlike QNAM, our toy http2 server sends payload as one big chunk as soon as
it fits in the receive window's size. Internally, 'frame writer' splits this
payload into many DATA frames of the appropriate size (imposed either by the
default value or the one from the client's SETTINGS frame). If some test fails,
we can end up with a server waiting for the writer to send all the DATA frames
though it is not needed anymore - there is nobody to receive them after a failure.
This patch moves such a loop into the test server instead and stops the loop early
if needed.
Change-Id: Iea2dcd718d8f83386fd16004807f6447bf999435
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replace with QSignalSpy or QTRY_COMPARE when possible.
Task-number: QTBUG-63992
Change-Id: I18dc8837301424855487a12ee62451a5aeb21bf0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
... but only if the host it came from is an EXACT match. Also only apply
the cookie if the url is an EXACT match.
[ChangeLog][QtNetwork][QNetworkCookieJar] Cookies will no longer be
rejected when the domain matches a TLD. However (to avoid problems
with TLDs), such cookies are only accepted, or sent, when the host name
matches exactly.
Task-number: QTBUG-52040
Change-Id: Ic2ebd9211c48891beb669032591234b57713c31d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QNetworkRequest is already aware of the Last-Modified header but
has been lacking support for the If-Modified-Since, ETag, If-Match
and If-None-Match headers. These headers are used with HTTP to
signal conditional download requests.
See RFC 7232 for more information.
Change-Id: I248577b28e875fafd3e4c44fb31e8d712b6c14f1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTestEventLoop (conveniently so) takes care of timeouts thus no
external QTimer/handling logic needed at all.
Change-Id: Id65ea928daec1e7d9380107e63916896f19d3d14
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
1. If a request was redirected or some error was encountered, we
try to reset the uploading byte-device.
2. Disconnecting from the byte-device is not enough, since we have a
queued connection, _q_uploadDataReadyRead() gets called even if
byte-device was deleted and thus sender() can return null -
we have to check this condition.
3. Update auto-test with a case where our server immediately
replies with a redirect status code.
Task-number: QTBUG-67469
Task-number: QTBUG-66913
Change-Id: I9b364cf3dee1717940ddbe50cba37c3398cc9c95
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When network access is disabled, every QNAM request returns a
QDisabledNetworkReply instance, which emits error and finished
immediately. However isFinished() was still false, which could confuse
application code.
Change-Id: Ifd43c86364b11a9583a38fde536e6c09c109b55f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Has been failing a lot lately
Task-number: QTBUG-66247
Change-Id: Id940a573eb299379cacceb836890cbe0b3c896b7
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Without this fix, a fresh clean build of 5.9 will fail.
Change-Id: I69e4da382b07cc6e5e280e99478cbc3d44aa3f27
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The code used to fall back to anonymous login independently for username
and password; however, it should only use a fall-back password if the
username is missing or (case-insensitive) "anonymous". When a
non-anonymous username is given without password, we should simply skip
he PASS message to FTP.
If the FTP server requests a password, in the latter case, QFtp will
signal authenticationRequired; in all cases, if the server rejects the
given credentials, QFtp signals authenticationFailed. Either way, the
client code can then query the user for credentials as usual.
Task-number: QTBUG-25033
Change-Id: I2a4a3b2725819ab19c8a7e4baa431af539edcd8d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
setSession is only used if we have bearer management.
Change-Id: I64b9d29c01566e79bbca5d0dc11d6aee6d9b0bf0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This test became a real pain recently. A close look at the test shows
several problems (strangely enough, the failure can never be
reproduced on real machines, only on VM - Ubuntu and RHEL 6.6).
There are several asserts that are firing from time to time here and
there. They show that the logic in test is broken/incorrect. QNAM can
open several connections to a host, our test then incorrectly resets
its 'client' data-member and bad things can later happen after
'bytesWrittenSlot' executed (and deleted a socket). For example,
I can reproduce this scenario in every second run:
1. incoming connection -> client = socket(descriptor), connect to
client's readyRead (s1)
2. incoming connection -> client = socket(descriptor), connect to
client's readyRead (s2)
QNAM sends a request on s1. We reply on s2 (which is already wrong)
and call client->deleteLater(), which resets client to nullptr.
If QNAM sends something else on s1, we hit assert(!client.isNull()).
To avoid this, whenever 'sender' in any slot is different from the
'client', we use the actual 'sender' to reply. Another problem is this
weird and rather cryptic waitForFinish which is not needed in this
particular test since we wait for reply error, not 'finished'.
As it happened before - it's not clear if these two problems
were the cause of guaranteed fails on CI - an integration failed
~10 times in a row in the same test (not happening anymore though).
Task-number: QTBUG-64569
Change-Id: Id9aa091290350c61fadf1c3c001e7c2e1b5ac8f4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Also blacklist tst_QNetworkReply::ioHttpRedirectErrors(too-many-redirects)
on RHEL 6.6 in CI.
Conflicts:
tests/auto/network/access/qnetworkreply/BLACKLIST
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Task-number: QTBUG-64569
Change-Id: I7514fc0660c18fd3a3e1d0d0af3f15d879e3c6f4
Looking at the failures in grafana it appears this test is also failing
on Windows 64. The same fix applies then, and we use Q_OS_WIN now.
Change-Id: Iafcfd6d1e747f3c816878cad072fbfae3aee19ca
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch works around Windows X86 on QEMU antics.
It appears on this platform the test behaves in some unpredictable manner:
- WSAConnect with 255.255.255.255 does not always immediately fail with
some error, so socket engine waits for a connection timeout (30 s.),
but the test itself
- only waits for 5 seconds and then tests that a request has finished with
error, which is not true (we are still connecting).
To make it work - whenever we have bearermanager feature enabled, set
a connection timeout to something reasonable, not 30 s.
Since we try to connect to each address twice, make timeout 1.5 s
(so it's 3 s. in total and still is < 5 s.).
Task-number: QTBUG-64264
Change-Id: I1d40c140667fca8402ec9344e66d313b6df54256
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- Blacklist ioHttpRedirectPostPut for Windows
- Amend 84396a3f93:
Keys need to be on subsequent lines
Task-number: QTBUG-62583
Change-Id: I6360ec7bd87de65a3294a0d22148f13579fcd292
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
While removing insignificant flag in commit
38a0909d4e and blacklisting
autotests that still failed, qtbase builds didn't
verify VS2017. That broke qt5 builds which do build VS2017.
Task-number: QTBUG-64264
Change-Id: I5fdfa5dac6192f449a05146a9a422e428a710c84
Reviewed-by: Liang Qi <liang.qi@qt.io>
This test fails often and seems to be flaky.
Task-number: QTBUG-62583
Change-Id: Id3af283c89e392634a7af6e11bd05775a4295798
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Neither the exit crash of QTBUG-21102 nor the Windows failure of
QTBUG-24226 appear to be reproduceable.
Add verbose error reporting to getErrors() and blacklist
getErrors:ftp-host which has been found to fail with timeouts
on Linux and ioHttpRedirectMultipartPost.
Task-number: QTBUG-21102
Task-number: QTBUG-24226
Task-number: QTBUG-62860
Change-Id: I6b29f6184e83de8ffebf6ff0d80606512dca6419
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
1. Recently we have updated our receive window size to a larger value.
Unfortunately, this also results in auto-test pumping through
more data, which probably takes more time on CI.
At the moment we do not have any public API on QNAM's level to
customize HTTP/2 parameters (aka 5.10/FF and so on). So we use the fact
that QNAM is QObject and we can set a property on it. This property
is our Http2::ProtocolParameters object that allows us to configure:
- HPACK parameters (in 5.10 - noop)
- session receive window size
- different SETTINGS as described by RFC 7540, 6.5.2.
2. Undocumented environment variable to set ENABLE_PUSH is not needed
anymore.
3. In 5.11 Http2::ProtocolParameter will become a public API
and we'll introduce a new setter in QNAM.
Change-Id: If08fd5e09e7c0b61cf9700b426b60b5837b6b2e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
c4cf90b1f7 made POST requests be
redirected properly, but this wasn't enough and should have included
every method/verb.
Change-Id: I37b12dc9fdffcbf2aadbd2360d4fc2584c024939
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The path wouldn't match if the cookie's path was root ('/') and the
URLs path was empty.
Change-Id: I6dcd10f1fdf4f48f14e50f1b169cbdfda7005849
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
All POST requests that were redirected would previously turn into GET
requests. This does not follow the standard for HTTP codes 307 and 308.
Task-number: QTBUG-63142
Change-Id: Ibd25a9566066e589670a9bc34e5dc5111f8139d5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In some cases when a session isn't needed (i.e. for localhost), the
session is not opened at all. If a program (e.g. our tests) redirects
from localhost to a different system (e.g. the qt network test
servers, or the internet) it will wait for a session forever. So, we
need to check if a session is needed for the redirect-target and then
open one. It is usually opened in
QNetworkReplyHttpImplPrivate::_q_startOperation
Change-Id: Id3b78182a3fb3f63f0235ecb1fb665df8bd0c4ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We already cleared 'cookedHeaders', which is a QHash for 'known headers'
(enumerators as keys instead of strings), now do the same for 'rawHeaders'-
not to end up with some weird mix of headers from all possible redirect
responses and the final response.
Task-number: QTBUG-61300
Change-Id: Ifd6655c4167840bb00d29446d36ce65ba2d5491a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
A few tests would QSKIP depending on the inclusion of SSL, producing
multiple lines of noise in the output.
And one test used https in one of its configurations without checking to
see if it could, causing an UnknownProtocolError.
Change-Id: I5f54bf1005f962cc027c099b816fbe245dc43d3f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We were using the default ones, provided by RFC7540. It appears they are way
too restrictive and conservative: when downloading something relatively big,
a stream keeps spending the whole session/its own 'recv' windows and thus
we have to constantly send WINDOW_UPDATE frames. This significantly slows
down our HTTP/2 implementation, making it orders of magnitude slower than
HTTP/1.1. To fix this:
- We send SETTINGS_INITIAL_WINDOW_SIZE in the first SETTINGS frame
to inform our peer that per-stream WINDOW is bigger than 64Kb
- We increase the session's receive window size.
Task-number: QTBUG-63722
Change-Id: I31312fcfd5f0fc0aee6aaa5d3562cc7d1b931adc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
308 Permanent Redirect was introduced after redirection support was
initially added to Qt.
[ChangeLog][QtNetwork][QNetworkAccessManager] Added support for HTTP status 308.
Task-number: QTBUG-63075
Change-Id: I1c6cda331d776237113ef8854de9abfe7e41ed3e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The issue itself is not really worth fixing (the very first request
being supposed to have a different proxy than any of the other
following requests before a session has been initiated), but we can
at least make the test pass when it is run alone.
Task-number: QTBUG-63134
Change-Id: I6c7df5c5653541031811e6bff562572061afae0f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Following the introduction of AutoDeleteReplyOnFinishAttribute to
QNetworkRequest it seems natural to make it easy to enable for all
replies created with the current QNetworkAccessManager.
[ChangeLog][QtNetwork][QNetworkAccessManager] Added setAutoDeleteReplies
to QNetworkAccessManager to enable the AutoDeleteReplyOnFinishAttribute
attribute for all QNetworkRequests that are passed to
QNetworkAccessManager.
Change-Id: I7f96dd1fc9a899328e89732be17780b4e710c2a2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
[ChangeLog][QtNetwork][QNetworkRequest] Added the
AutoDeleteReplyOnFinishAttribute attribute to QNetworkRequest, which
makes QNetworkAccessManager delete the QNetworkReply after it has
emitted the "finished" signal.
Change-Id: I03d4ac0830137882e51dd28795a8ec817762a300
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When migrating QFtp test to docker server, it seems it is easy to get
"QTestEventLoop::instance().timeout()" during the test in Coin network.
To move the task of migration forward, those flaky timeout errors will
be ignored for short-term.
Task-number: QTBUG-75549
Change-Id: I797952b82c0ceb637f40c77fac2a88ca2a9a0eae
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use docker test server to run test, following instructions on
https://wiki.qt.io/Network_Testing. Verified on Ubunutu 18.04.
Several test failures due to network timeouts and inconsistent
configuration of FTP server and assumptions made in the tests.
However, the test is either way blacklisted, and the docker test
server is not in use yet.
Done-with: Ryan Chu <ryan.chu@qt.io>
Fixes: QTQAINFRA-2275
Change-Id: I4cbd0109ce3f4cfb23ba2303a85796681d12febc
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Don't reimplement the protected functions in the base class just
override the access with the using keyword.
Change-Id: I323487d9ddb1d458d5faca020c3eb4d931a9b226
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Before testserver becomes a stable feature, let's keep testserver.prf in
"mkspecs/features/unsupported". The test server's shared files will be
stored in "mkspecs/features/data/testserver".
Because the path of testserver has been changed, all the tests relying
on the docker servers should be updated as well.
Change-Id: Id2494d2b58ee2a9522d99ae61c6236021506b876
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Various patterns seem to have been copied, notably counting time from
QTime(0, 0) rather than using QTime::msecsSinceStartOfDay() and its
setter. Unsuitable value types also put in an appearance, and
QTime()'s parameters after the first two default to 0 anyway.
Corrected a lie in QTime()'s default constructor doc; it does not work
the same as QTime(0, 0) at all.
Change-Id: Icf1a10052a049e68fd0f665958f36dbe75ac46d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
and make it work with our new docker-based test server
Change-Id: I98b5b5b1e2cdca46b7f15be72aa1483d9455403d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Conflicts:
tests/auto/widgets/itemviews/qheaderview/tst_qheaderview.cpp
Added tests/auto/testlib/selftests/expected_crashes_5.txt to work
round the output of the crashes test (which exercises UB, see
QTBUG-73903) being truncated on one test platform.
Change-Id: I9cd3f2639b4e50c3c4513e14629a40bdca8f8273
to make it work with our new docker-based test server.
Change-Id: I76345a2d3d768b8a571f2c85e69f6a21e9a96d7e
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The sources were already added conditionally in the project file since
179fe5981f.
Change-Id: I0baaec2e772f3e596d311c1973b9745aa2b80423
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Teach our MiniHttpServer to better handle POST and PUT requests:
read the POST/PUT data too (not headers only), before replying
and flushing. The original comment says MiniHttpServer does
not support POST/PUT requests, it's not true anymore - we can
handle them (perhaps the simplest/shortest ones).
Task-number: QTBUG-62844
Change-Id: I80260f8ede1bb1b0b9d6042ecd59558bb7e9a998
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Without TLS (and thus ALPN/NPN negotiation) HTTP/2 requires
a protocol upgrade procedure, as described in RFC 7540, 3.2.
We start as HTTP/1.1 (and thus we create QHttpProtocolHandler first),
augmenting the headers we send with 'Upgrade: h2c'. In case
we receive HTTP/1.1 response with status code 101 ('Switching
Protocols'), we continue as HTTP/2 session, creating QHttp2ProtocolHandler
and pretending the first request we sent was HTTP/2 request
on a real HTTP/2 stream. If the first response is something different
from 101, we continue as HTTP/1.1. This change also required
auto-test update: our toy-server now has to respond to
the initial HTTP/1.1 request on a platform without ALPN/NPN.
As a bonus a subtle flakyness in 'goaway' auto-test went
away (well, it was fixed).
[ChangeLog][QtNetwork][HTTP/2] In case of clear text HTTP/2 we
now initiate a required protocol upgrade procedure instead of
'H2Direct' connection.
Task-number: QTBUG-61397
Change-Id: I573fa304fdaf661490159037dc47775d97c8ea5b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
That means a file is never created, unless you ask for the name. There's
no chance of left-over temporary files being left behind. QSaveFile also
benefits from this, since the save file is not present on disk until
commit(). Unfortunately, QSaveFile must go through a temporary name
because linkat(2) cannot overwrite -- we need rename(2) for that (for
now).
[ChangeLog][Important Behavior Changes][QTemporaryFile] On Linux,
QTemporaryFile will attempt to create unnamed temporary files. If that
succeeds, open() will return true but exists() will be false. If you
call fileName() or any function that calls it, QTemporaryFile will give
the file a name, so most applications will not see a difference.
Change-Id: I1eba2b016de74620bfc8fffd14cc843e5b0919d0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
The test verifies that a cookie with a date in the future is not
"expired" and will be sent to the server. This test started failing
on August 7th 2017 when the test case "0003" with it's cookie expiring
August 7th 2017 started ... expiring ;-)
Bumped all suspicious cookie test cases by a hundred years.
Change-Id: I7c09069ec4999e2ea0aae7b2a2819cced0fd6a99
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The store is using QSettings under the hood. A user can enable/disable
storing HSTS policies (via QNAM's setter method) and we take care of
the rest - filling QHstsCache from the store, writing updated/observed
targets, removing expired policies.
Change-Id: I26e4a98761ddfe5005fedd18be56a6303fe7b35a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This is the result of running the (experimental) clang-tidy check
qt-modernize-qsharedpointer-create
Discarded changes:
- tst_qsharedpointer.cpp: not sure we want these replacements there
(→ separate change)
- tst_collations.cpp: hit in a template specialization that is
instantiated with both QSharedPointer and QSharedDataPointer.
Change-Id: I203c2646e91d026735d923473af3d151d19e3820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_qvariant.cpp(80): warning C4309: 'initializing': truncation of constant value
tst_qvariant.cpp(4635): warning C4309: 'initializing': truncation of constant value
tst_qbytearray.cpp(1438): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
tst_qbytearray.cpp(1440): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
http2srv.cpp(64): warning C4018: '<=': signed/unsigned mismatch
tst_qinputdialog.cpp(352): warning C4804: '<=': unsafe use of type 'bool' in operation
Change-Id: Id012d88b7b20c5c9f128f2ef53753cc1d479f358
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If QEMU is provided sysroot with QEMU_LD_PREFIX, it opens files from there. If their
owner is the current user, testing their access rights based on assumption that they
are root fails. Skip the tests in that case similarly as is already done when the
tests are run as root.
This fixes following tests:
- tst_QTemporaryDir::nonWritableCurrentDir
- tst_QNetworkReply::getErrors(file-permissions)
- tst_qstandardpaths::testCustomRuntimeDirectory
Task-number: QTBUG-59966
Change-Id: I972ce37b4b5a7747cdd732a8e4a737ef09cbc6a5
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously we were always setting SpdyWasUsedAttribute for SPDY/HTTP/2/HTTP/1.1
(true/false) which is confusing. Now if HTTP2AllowedAttribute was set to true on
a request, we set HTTP2WasUsedAttribute. Otherwise, as we did before, we're setting
SpdyWasUsedAttribute.
Change-Id: I0c44cfb5469fef0c12719baa951197ee2accee4a
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It's a Qt 3 compatibility vehicle, and as such inherits the now-alien
property to distinguish empty and null strings. Particularly worrisome
is the following asymmetry:
QString("") == QString::null // false
QString("") == QString(QString::null) // true
Instead of fixing this behavior, recognize that people might use it as
a weird way to call isNull(), albeit one that once was idiomatic, and
simply deprecate everything that deals with QString::null.
[ChangeLog][QtCore][QString] QString::null is now deprecated. When
used to construct a QString, use QString() instead. When used to
compare to a QString, replace with QString::isNull().
Change-Id: I9f7e84a92522c75666da15f49324c500ae93af42
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
After it started to fail (somehow it's only OpenSUSE 42.1) again and again
and after a quick re-evaluation it appears the logic testing SETTINGS|ACK
is incorrect. We (client side) start by sending the preface and then
continue to send our request(s). The other side (server) starts from sending its
SETTINGS frame. These settings must be ACKed, but apparently it can happen,
that server receives a requests and sends a reply before it receives SETTINGS|ACK,
resulting in replyFinished (replyFinishedWithError) signal and event loop stopping.
As a result - QVERIFY(serverGotSettingsACK) fails.
Task-number: QTBUG-58758
Change-Id: I8184cf459b2b88f70c646171e0115c184237fad1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
HTTP Strict Transport Security (HSTS) is a web security policy that
allows a web server to declare that user agents should only interact
with it using secure HTTPS connections. HSTS is described by RFC6797.
This patch introduces a new API in Network Access Manager to enable
this policy or disable it (default - STS is disabled).
We also implement QHstsCache which caches known HTTS hosts, does
host name lookup and domain name matching; QHstsHeaderParser to
parse HSTS headers with HSTS policies.
A new autotest added to test the caching, host name matching
and headers parsing.
[ChangeLog][QtNetwork] Added HTTP Strict Transport Security to QNAM
Task-number: QTPM-238
Change-Id: Iabb5920344bf204a0d3036284f0d60675c29315c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
With this new policy, after emitting 'redirected', QNetworkReplyHttpImpl
waits for client code to decide if QNAM should follow this redirect or
not. The client can either allow this redirect by emitting 'redirectAllowed'
or abort the reply.
Task-number: QTPM-236
Change-Id: Ia04619f6bd1f0caa477833ae859b24033027b2e1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch makes it possible to enable/disable redirects on QNAM
level (before it was per-request only). This policy would be applied
to all subsequent requests* created by QNAM.
The policies we support at the moment:
a. Manual - that's what we always had - it's up to a user to handle
redirects.
b. NoLessSafeRedirectsPolicy - we allow http->http, http->https and
https->https redirects, but no protocol 'downgrade' (no
https->http redirects).
c. SameOriginPolicy - we check that protocol/host/port are
the same.
Updated tst_qnetworkreply.
*We previously were enabling redirect for each request, by
setting FollowRedirectsAttribute on QNetworkRequest object.
For backward compatibility this attribute has a higher priority
(if set) than QNAM's policy (and it will work as NoLessSafeRedirectsPolicy).
[ChangeLog][QtNetwork] Added redirects policy to QNAM
Task-number: QTPM-239
Task-number: QTPM-237
Change-Id: I493d1728254b71b61b5504937e8e01dca5953527
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Sometimes it is desirable to use a new connection but keep already
entered user credentials for usability reasons. This is now possible by
clearing the connection cache (but keeping the authentication cache).
Change-Id: I2f5f64836ce19f81c8525701783a3da823dd468e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
- Fix the case when we erroneously handled stream ID == 0 in a GOAWAY frame as
an invalid stream ID.
- _q_receivedReply: convert do{}while() loop into to while(){} to prevent
it from handling any frames after GOAWAY frame received and all active frame
finished.
- sendRequest - if we received GOAWAY, also clear spdyRequests in the connection
channel, otherwise it keeps re-trying to send requests!
- Http network connection channel never resets a protocolHandler in _q_encrypted/
_q_connected, which is BAD for HTTP/2, since HTTP/2 has unique per-connection
compression context and must be reset - now we recreate the protocol handler in
_q_encrypted or _q_connected (https/http).
- Update autotest.
Task-number: QTBUG-57600
Change-Id: Ib864ce52287bab23334ff43a83ba4b0b7cb52c60
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... after a member-function declaration: this would be a compilation error
anywhere outside of a class-definition, allowed as 'opt' inside a class-definition
and essentially not needed at all (and is already different from other
member-functions we have in the same code).
Change-Id: Ia689a41bf2a1052cd19eb8fb4766ed9635c20c88
Reviewed-by: Jesus Fernandez <jesus.fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Consistent with other Unix platforms, and internally consistent between tests,
as a lot of tests were already applying CONFIG -= app_bundle manually.
Change-Id: Icd2b7e1c08015b26137af60ff82fddbc753f0ff4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
HTTP/2 allows a server to pre-emptively send (or "push") responses (along
with corresponding "promised" requests) to a client in association with a
previous client-initiated request. This can be useful when the server
knows the client will need to have those responses available in order
to fully process the response to the original request.
Server push is semantically equivalent to a server responding to a request;
however, in this case, that request is also sent by the server, as a
PUSH_PROMISE frame.
The PUSH_PROMISE frame includes a header block that contains a complete set
of request header fields that the server attributes to the request.
After sending the PUSH_PROMISE frame, the server can begin delivering the
pushed response as a response on a server-initiated stream that uses the
promised stream identifier.
This patch:
- fixes the HPACK decompression of PUSH_PROMISE frames;
- allows a user to enable PUSH_PROMISE;
- processes and caches pushed data for promised streams;
- updates auto-test - emulates a simple PUSH_PROMISE
scenario.
Change-Id: Ic4850863a5e3895320baac3871a723fc091b4aca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There are more than 1000 new entries since the table has been
generated the last time. The autotest needs to be tweaked
because the rules for the .mz domains have changed; use the
.ck domain instead.
Change-Id: Ife692afd46ac41a66604e966e5e8cb57c7aa649c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... and move toString() implementations there which were repeated in
network tests, or #ifdef'ed in qtest.h.
Since the functions moved from network tests are now in a public header,
had to massage them a bit to pass headersclean:
- replace Q_FOREACH with C++11 range-for
- avoid implicit conversion from QByteArray -> const char* (done by
re-using toString(QByteArray) instead of calling strdup() manually)
Also made the functions overloads instead of specializations. This
allows to pass the enum by value instead of by const-&.
Like the existing QHostAddress, the newly-added toString() overloads are
marked as \internal. We can decide later whether to turn them into
public API.
Change-Id: I8c23db7a0a6575273567017d42d7b2a957acece8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Move the different parts of configure.json/.pri into the libraries where
they belong.
Gui is not yet fully modularized, and contains many things related to
the different QPA plugins.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I6659bb29354ed1f36b95b8c69e7fce58f642053f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Source (.cpp and .h) files should not be executable.
Change-Id: I021d8733185d73d071fcaf3df7e529862a490b63
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Debug code is suppressed; let someone investigating a problem be able
to turn it on/off by just editing one byte instead of each line of the
block of debug code.
Change-Id: Iba06df4042d9126d3a5d0873e524ef504c19d3de
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
