If in a slot connected to QAbstractItemView::clicked
QAbstractItemView::setModel(nullptr) is called the method
QAbstractItemView::mouseReleaseEvent will cause a segmentation fault.
The problem is that the method QAbstractItemView::model used in
QAbstractItemView::mouseReleaseEvent will return a nullptr if a null
model was set. The solution is to used d->model since it is always a
valid model. (See line d->model =
(model ? model : QAbstractItemModelPrivate::staticEmptyModel());
in method QAbstractItemView::setModel)
Change-Id: I6f01bdeac64495ee4a76adcc7bf8da8a7719ef4d
Reviewed-by: David Faure <david.faure@kdab.com>
This test fails on Windows 10 x64 Creators Update CI builds for unknown reasons.
Change-Id: I766bccfd4dea9ea195c68403018b419e800a7b3b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
tst_qgraphicswidget::checkReason_ActiveWindow fails on Windows 10
Creators Update. Added expect fail for Windows platform.
Task-number: QTBUG-62244
Change-Id: I71868a496659e7136af9a5b74684ba39edaf03ae
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
internalInsert() will set the cursor to the right position which accounts
for any input mask set on the control as well. Therefore it will already
be placed at the next correct position and should not be changed again
after that.
Task-number: QTBUG-40943
Change-Id: Ic0f5fad6999ddd367e435ec4409a5db5b9eacb7b
Reviewed-by: Daniel Teske <qt@squorn.de>
Reviewed-by: David Faure <david.faure@kdab.com>
This is the result of running the (experimental) clang-tidy check
qt-modernize-qsharedpointer-create
Discarded changes:
- tst_qsharedpointer.cpp: not sure we want these replacements there
(→ separate change)
- tst_collations.cpp: hit in a template specialization that is
instantiated with both QSharedPointer and QSharedDataPointer.
Change-Id: I203c2646e91d026735d923473af3d151d19e3820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Verify that all pixels of the grabbed image are green instead
of comparing an image loaded from file.
The test then also passes when High DPI scaling is active in
which case a twice as big pixmap with DPR=2 is obtained when
grabbing the widget.
Change-Id: Ie5244a39a68ea0defd2590cf30f251d660d0869b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Scale coordinates in a few places, remove pixmap scaling in
grabWindow() (Windows).
Change-Id: Iba9e5d3ca55422a14eda09c8d04329a455d3acb3
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Consider the raw string \\\\. The previous algorithm would consider
the last 3 \ to be escaped because the previous character is a \ and
thus calculating a maxLength of 3.
But this should be treated as two escaped \ with a maxLength of 2.
Change-Id: I6c4b8d090a2e1c6e85195d5920ce8b80aea1bc2d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Subtract the viewport margins from the contentsRect in
QCommonListViewBase::updateHorizontal/VerticalScrollBar(). This
affects list views in icon mode and list mode / ScrollPerPixel.
Task-number: QTBUG-61383
Change-Id: I6f2f7951ac9344ac21cef1eba061780d130e2467
Reviewed-by: David Faure <david.faure@kdab.com>
A visibile QOpenGLWidget receives a QEvent::WindowChangeInternal which triggers
a QOpenGLWidget::reset(). A hidden QOpenGLWidget never received this event
so it was never reset, resulting in a black rendering.
Includes unit-test that fails without this patch.
Change-Id: I9d2c57d66fa629f631a9829a5ebf4de09998ad75
Task-Id: QTBUG-60896
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
tst_qvariant.cpp(80): warning C4309: 'initializing': truncation of constant value
tst_qvariant.cpp(4635): warning C4309: 'initializing': truncation of constant value
tst_qbytearray.cpp(1438): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
tst_qbytearray.cpp(1440): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
http2srv.cpp(64): warning C4018: '<=': signed/unsigned mismatch
tst_qinputdialog.cpp(352): warning C4804: '<=': unsafe use of type 'bool' in operation
Change-Id: Id012d88b7b20c5c9f128f2ef53753cc1d479f358
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test fails for unknown reasons when using the mesa swrast when using
qemu/kvm (as opposed to when using the vmware mesa driver).
Task-number: QTQAINFRA-1318
Change-Id: Ib7e9d894cd368b8c2c12d83ec1e4862622781fe6
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
It's failing for inexplicable reasons not only on 10.10 but also 10.11.
Task-number: QTQAINFRA-1317
Change-Id: Id316764443dfe9e0ae30e2d25d8bae73fa255617
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The test is failing inexplicably on macOS 10.11.
Task-number: QTQAINFRA-1315
Change-Id: Ia0162768b6d4fdd016bce62b92c3df0b5d4ed8d0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
qtreewidget.h:179:53: warning: 'search' may be used uninitialized in this function [-Wmaybe-uninitialized] ^~
tst_qtreewidget.cpp:1564:22: note: 'search' was declared here
QTreeWidgetItem *search;
tst_qtreewidget.cpp: In member function 'void tst_QTreeWidget::expandAndCallapse()':
tst_qtreewidget.cpp:2678:18: warning: 'p' may be used uninitialized in this function [-Wmaybe-uninitialized]
Change-Id: I19c9dc86aa12f36c26ae2475f1854ed17fad0638
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
show will use the platform's default flags but the test actually checks
for the flags that were set before so we have to use setVisible(true)
instead.
Change-Id: I52c055ec07d6f0dee626626318c875aefdf67484
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
FAIL! : tst_QWidget::restoreVersion1Geometry(geometry.dat) Compared values are not the same
Actual (((widget.pos()))): QPoint(90,90)
Expected (expectedPosition): QPoint(100,100)
Loc: [tst_qwidget.cpp(3193)]
Remove the previously added QSKIP since this test now passes.
Task-number: QTBUG-26421
Task-number: QTBUG-46116
Change-Id: Ieff474a8a69c14a0df231a9a587aee02df4e8ea7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
- Put all widgets in one dialog so that show/setActive occurs only once.
- Use the center of the widget geometry for positioning.
- Remove BypassWindowManagerHint which likely causes qWaitForWindowActive()
to fail.
- Move the cursor out of the way and subsequently send mouse events
to the QWindow
Task-number: QTBUG-51400
Change-Id: I2176d8dbaead72d7a6fa89aa769e4c804eea7a0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
By avoiding unneeded nested QPainters.
Crash was:
ASSERT: "s" in file /data/sources/qt/qt5/qtbase/src/gui/painting/qpaintengine_raster.cpp, line 2239
s was nullptr because the inner QPainter had called updateState(0), which is then dereferenced by the outer QPainter.
Task-number: QTBUG-61036
Change-Id: I7aad648f805f1abac4d38dfbefa2292da8b52af4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
In the referenced bug report, dismissing a QFileDialog while the
Qt Virtual Keyboard was in use would result in a crash.
Dismissing a file dialog created with
e.g. QFileDialog::getOpenFileName() causes it to eventually be
destroyed. When this happens, it starts deleting its children. Each
child widget's destructor calls clearFocus(). In clearFocus(), there is
a block of code that emits QWindow::focusChanged(), passing the result
of focusObject() called on that widget's window.
QWidgetWindow::focusObject() could end up using itself as a fallback
focus object if it had no other focus objects (e.g. children) to use
instead, even though it was in the process of being destroyed; as were
all of its children. The Qt Virtual Keyboard plugin would then try to
use the focus object, even though it was in an invalid state.
To fix this problem, we return early from QWidgetWindow::focusObject()
if the window is in the process of being destroyed.
Task-number: QTBUG-57193
Change-Id: I137cf9415812ce2e0419c0afe8076ce150f248cb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jarkko Koivikko <jarkko.koivikko@code-q.fi>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This makes the test a lot faster and perhaps more reliable.
Change-Id: I055cfde627c75f71735eabbf01af2a196bd8b00a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It was grabbing a QLabel without accounting for the size of
the window in the case where the DPI is larger than 1:
FAIL! : tst_QWidget::translucentWidget() Compared values are not the same
Actual (actual.size()) : QSize(32x32)
Expected (expected.size()): QSize(16x16)
Change-Id: I4873f3c6364ee2696f5612d91e6c97c60b2cd915
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This is a followup to 77a8e90cdd which
didn't handle the case where no columns had been moved.
visualIndices and logicalIndices are empty until initializeIndexMapping()
is called, in which case appending is wrong.
As a result, visualIndex(i) would return -1 for the values over
those added by read(), and an assert would happen at painting time.
The fix is to leave visualIndices and logicalIndices empty if
they are empty already, leaving it to initializeIndexMapping()
to fill them later if necessary (e.g. when moving a column).
Task-number: QTBUG-60837
Change-Id: Ia7e4b9d3122647984acd434dfaa0400df319d065
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Known to fail now and then, most likely due to the mouse cursor
moving while the test is executing.
Task-number: QTBUG-60754
Change-Id: Id8f0786416d0df33f197a7a8f99b7aad1341a6be
Reviewed-by: Liang Qi <liang.qi@qt.io>
CI metrics show that this test was flaky ~38 time in 3 days.
The problem is old: after we get a surface, a window manager can still
decide to re-position the window.
The fix is to simply send the touch event in a position where it is sure
to hit the window (usually the offset is the title bar height).
The blacklisting seems to not have worked, I could reproduce the failure
on a linux/xcb machine.
Change-Id: I5229fe020ba75c984fd3b6c322ad00d769707573
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Change the check for the unambiguous match to be case insensitive.
Task-number: QTBUG-60466
Change-Id: Iaa019cc803a56b015f45309fb1b3a7a8a3d82ee4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Unselecting with offscreen and minimal platforms behave similarly as in
Windows and QNX. If left or right key is used for unselecting, cursor
position is changed.
Change-Id: I022cd2fec80ad1875fec983e1e3536a105e18bb2
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Some features are not implemented by "offscreen" platform. Skip tests
failing because of that. Some failing cases are also already skipped or
blacklisted on "xcb" platform.
Change-Id: I17269169379c270bd7d6f2ddda03ad9b114a71ce
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Commit 288bfb0bbd added a test that uses QLineEditIconButton, which
requires QT_BUILD_INTERNAL to be defined in order for the findChild()
call to work as expected.
Change-Id: Ieda18f4e26a91322e8a83c14f8d1fbbe4313ecf0
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
