this moves us another step towards the "outer" configure doing just
minimal bootstrapping of qmake.
a challenge here was that so far, qmake itself needed qconfig.cpp. this
was replaced by usage of a qt.conf file instead of compiled-in values.
however, to make the executable still self-contained, that qt.conf is
embedded into it (by simple appending of a fixed signature and the text
file).
the qmake with the embedded qt.conf is not used for the qt build itself,
which instead relies on the qt.conf in bin/ as before. however, due to
the missing built-in values, this file now needs to contain more
information than before. but except for a minimal version that is needed
to start up qmake/configure at all, that file is now also generated with
qmake. as some of the newly set up properties are subsequently used by
configure itself, qmake gains a (deliberately undocumented) function to
reload the qt.conf after it's fully populated.
unlike the old implementations, this one doesn't emit redundant qt.conf
entries which match the hard-coded fallbacks. omitting them leads to
leaner files which are more comprehensible.
Started-by: Paolo Angelelli <paolo.angelelli@qt.io>
Change-Id: I4526ef64b3c89d9851e10f83965fe479ed7f39f6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
otherwise, infinite loops can result, as amply demonstrated by the new
configure (which duly replicated the old configures' behavior ...).
QMakeEvaluator::evaluateBuiltinExpand() now returns a VisitReturn like
all other evaluate*() functions. the string list return value is now an
out parameter; i used a reference instead of a pointer to avoid
adjusting 56 usages of it.
Task-number: QTBUG-13964
Change-Id: I51ca7df8d694c6ffe9d9899cba414b1b46f5ce95
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The phrase "which as been" lacked an h (albeit one silent in some
anglic dialects). The added letter made an already long line stick
out just a little more. Judicious rephrasing of the early part of its
sentence made reflow a way to fix that.
Change-Id: I29c2ac79d08a135dd4a16518f459872c8ecd1f24
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
eliminating everying TARGET-related was a nice try, but in the real
world (e.g., qttranslations), extra compilers are activated by
PRE_TARGETDEPS, which of course doesn't work when TARGET is entirely
gone.
so instead, let it act as a phony target. this is consistent with the
unix generator.
supersedes 0810d48bc in amending af2847260.
Task-number: QTBUG-57423
Change-Id: I3d2ecc4ff42b37ffe5f71f5c20d17c06b31f4da2
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
For QMAKE_EXTRA_COMPILERS with inputs that are "buildable" (e.g. C++
sources) the custom build step is added to the output file. From Visual
Studio's point of view this looks like a circular dependency (e.g.
foo.moc generates foo.moc). Usually this just prints a warning that can
be ignored. But this circular dependency also breaks dependencies
between custom build steps. This became noticeable when the generation of
moc_predefs.h was added. Generating moc_predefs.h must be done before
any moc custom build step is executed.
This patch fixes the issue by using fake files (output file plus suffix
".cbt" for "custom build tool") that act as dummy inputs for the custom
build tools.
Task-number: QTBUG-16904
Task-number: QTBUG-57196
Change-Id: I4711e44a0551046d215db151fa0312af8a9177a2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
it's wrong to use the escape function for makefiles, as the command
goes directly to a popen() call.
Task-number: QTBUG-57343
Change-Id: I34a8e4d8fb406303c593e7c1e24019e0f756e7f8
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The values of this hash are strings, not lists of strings.
Enforce this by using the proper type instead of just using a comment.
Change-Id: Id8a13acdceb8f9f8a9a8eaa04e790b1e6cd5faa7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
of course, we should stub out everything related to TARGET - only the
generic "all" and "first" targets including their deps should be
emitted.
amends af2847260.
Change-Id: I8ed7a550b8022c69328d2e16dbd078928d176964
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
actually pack the extra compilers' input files, not the variable names.
unlike on unix, we don't create an actual distdir, so the package is
still going to be rather broken.
Change-Id: If0a15bbe9db95aebd88c2a21ca3c0f787ce5c7e1
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... instead of having (duplicated) code in the configures to create it.
Change-Id: Ia86b44021a024a969f5a49b7fb18d3d414869f93
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
so far, qmake.exe was built in qmake/ and then copied to bin/, with
possible errors in the second step ignored. this made no sense.
this unifies the nmake makefile with the unix one; compare 46e51ce1d.
Change-Id: Ieb9c7cd46f0be0501d17e297808ac1cdad1b3c4a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
when the file's effects are discarded, the mention of the file should be
as well.
Change-Id: I894b7e2b887dd34d18533b197bfa9d0d84d647e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the normal mode forces the prompt into a pattern which may be
undesirable.
Change-Id: I01689c7a6573415801862348b32bafc6a609ed4a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
that is, adjust path separators and don't quote them. we already did
that to some degree, but totally inconsistently, so it just didn't work
for any targets with "fancy" file names.
note that we don't bother doing that for recursive targets, as these are
assumed to be identifiers.
Change-Id: Ic75f003b71abc6fed03a4121b903ad5ee8253ed2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
there are plenty new functions, let's do this symbolic act.
Change-Id: Iaeb88afa5e33cacd81dc0ea26e380a16af06a739
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
We can not improve the result from JSON parsing without changing API,
so instead recalculate the line and column based on input and offset.
Change-Id: I54149233f71023aa5d30deff854d6f3406c5c48c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Replace which_dotnet_version with a simple function that converts the
value of MSVC_VER to its corresponding enum value in the VS project
generator.
This reduces the maintenance burden when adding support for a new VS
version, because we do not need to update the registry keys in
which_dotnet_version anymore.
The which_dotnet_version function implemented the following logic:
- find all installed VS versions via registry
- select the "best matching one"
- if there is no best match, select the VS that's in PATH
- create a project for that VS installation
The usefulness of this whole stunt is questionable as the VS version of
Qt's mkspec must match the version of a project using that Qt anyway.
Change-Id: I9fb9a099ee5ddb5fc4c450be4f68f41f2b406b9a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
sysroot, spec, and xspec have no /src and /get variants.
Change-Id: I8548791f8ea6ba9fd9f10c35f914ed6badbea9d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the autotest was also broken, because it was created by pasting the
bogus message into the result ...
Change-Id: I02b8663b96c7d96cdb3c19639e2213e49fd2bcec
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
On the way to get rid of this function.
Have one place to determine the VS version instead of calling
this function over and over again (even though all calls but
the first are cheap).
Change-Id: Ic42a65df5a9bbe289f4813e4db85000dba15e672
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Make qmake understand the /DEBUG:FASTLINK option in QMAKE_LFLAGS, and
write the corresponding value correctly to VS 2015 project files.
Task-number: QTBUG-55591
Change-Id: I670375ed1523a5ab96bb3cce28635785564edba8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Commit 3d3d65f5 separated the PDB files for compiling and linking. Only
the PDB file the linker produces would be installed. However, this does
not work for static libraries as the LIB tool does not create a PDB file
from the compiler's PDB file. This patch turns the separation between
PDB files off for static libraries.
Task-number: QTBUG-56594
Change-Id: I08dcb7889c67b2f6370efa1ee19be8558355bbc9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Following the discussion at QtCS 2016 about deprecated APIs,
let's enable the warnings by default.
Change-Id: I73fe63de3e4f755067100320d7497b6b227549b6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If the application's Info.plist contains the key
'NSPhotoLibraryUsageDescription', we know that we can safely link in
qiosnsphotolibrarysupport without violating AppStore requirements.
This is a simple feature that doesn't introduce additional qmake
API for doing app deployment with optional iOS QPA plugins.
[ChangeLog][iOS] Starting from iOS 10, Apple requires all apps
that need access to photos to have the key
'NSPhotoLibraryUsageDescription' in the Info.plist.
Therefore, to get the same support in Qt (when, e.g., using
a file dialog), the Info.plist assigned to QMAKE_INFO_PLIST
will need this key as well.
Change-Id: I7a93afe24b589cad96d5a1d9e2a155ad1671178a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
