This was introduced by accident in 4da47d0f.
Fixes: QTBUG-77429
Change-Id: Ic3d9052e1fc83dab5ed3b8725629588208b0d7bb
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Windows resource files support a subset of C preprocessor directives.
Among others they can have #include directives.
Use QMake's own scanner to retrieve the files that are included by a
Windows resource file and add them to its dependencies.
For the test case the TestCompiler class had to be extended:
runCommand is now public, and commandOutput is less peculiar.
Fixes: QTBUG-3859
Change-Id: I138703352c37c98297c0574a9a440510c1c494b8
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Having those characters in QMAKE_EXTRA_COMPILERS broke the generated
VS project file. They must be replaced by XML entities.
Fixes: QTBUG-1935
Change-Id: Iff1edbeabec4cedef777071682412970b7769f19
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
QMakeLocalFileName is not suitable for QList. Use QVector instead.
Change-Id: I5a3c4c8da14c0a920b5a57cba148ad68ac0f85a2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
RC_FILE is not an internal variable that "rarely needs to be
modified". Mention that it's about Windows resources and link to the
corresponding section.
RES_FILE: Add link to RC_FILE and the more general section. Also
rephrase "compiled Windows resource file" to "Windows resource
compiler's output file" which is more precise.
Fixes: QTBUG-8709
Change-Id: I19c61e6a9505d45fc13fefbcd0ba9441191aa42e
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Kavindra Palaraja <kpalaraja@luxoft.com>
If a project has DESTDIR and TARGET set to fixed values, then the
target paths conflict when doing debug_and_release builds.
With this change we're detecting this situation and yield a warning.
Fixes: QTBUG-2736
Change-Id: Ib163db3463322792ab9fa5b997285ac9fc9819ab
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Libtool cannot cope with absolute paths in the dependency_libs entry.
We split absolute paths into -L and -l here.
Change-Id: I30bf11e490d1993d2a4d88c114e07bbae12def6d
Fixes: QTBUG-76625
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
In MakefileGenerator::initOutPaths() we ensure that directory
variables end with a directory separator, except for DLLDESTDIR.
There doesn't seem to be a valid reason for this exception.
Remove it for the sake of simplifying the code base.
Change-Id: I60eb01b410161e6e1d147d76f044f5140a7573bd
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This undocumented option was introduced in
69c22301806b56d56cbe5f5076b889ba98e41a2b (old internal history, 2006) to
prepare some unspecified change to configure that was never done.
Change-Id: I60de731ac9bc6f6424c57574e59e9f6b4f6c5eb3
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Re-generation of the Makefile depends on a correctly set up
QMAKE_INTERNAL_INCLUDED_FILES variable. In debug_and_release builds
this variable is set up for Makefile.Debug and Makefile.Release, but
not for the meta Makefile. However, that's where the Makefile
re-generation target is located.
We now collect the contents of QMAKE_INTERNAL_INCLUDED_FILES for
Makefile.Debug/Release and use that for the meta Makefile.
Fixes: QTBUG-13334
Change-Id: I6124a91447d5c54d51680e23570c4e97f44e6a73
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
...because
- it calls the properly camel-cased member function buildArgs(bool),
which is slightly confusing
- it returns buildArgs(true) plus input and output
We also let it return only the arguments, excluding the qmake
executable. This is consistent with the function's name and saves us a
string replacement stunt at one call site.
Change-Id: I8bea65900bd51962962e4cfd425ffbc26e3a52fe
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove usage of the 'if (0 && ...)' pattern that was presumably used
to temporarily disable code paths. The disabling of the two code paths
was introduced in 356a677b386648710efc4db9a8a1b4a975f95c48 (old
internal history, 2004) and
0326e3511928d90329152b9b0493da76e9caa442 (old internal history, 2006).
It can be deduced that it's pretty safe to remove both.
Change-Id: I88aee65b1286701241b5b80fbac0c65cd99ecd5e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Without treating -force_load as an option with an argument, we end up
leaving stray -force_loads in the linker line, resulting in build
failures when the following option is a random library then treated
as a file path.
Task-number: QTBUG-66091
Change-Id: I352c50ab67e32ef6b2b5c6a4f90455b20034e207
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The linker doesn't support -framworkFoo, so neither should we. The correct
syntax is -framework Foo.
Change-Id: I3f39ffc067871ce058542bf0068274b35f7b51f6
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
This change allows using custom flags for ar. For instance, it is
now possible to create a thin archive by setting QMAKE_LIB += -T.
This uses and extends commit d92c25b1b4
which served a similar purpose for the linker.
Change-Id: Ie1d6a0b957dc4809957726de00911c8d91647fab
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
It conflicts with 'requires' keyword.
Fixes: QTBUG-77093
Change-Id: I85e8f530dd1e2bf9a31906dd6c5123b947235b01
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
ProFunctionDef is move-enabled, meaning its `m_pro` field can
become nullptr. Its usage in the assignment operator and the dtor
must therefore be protected with a check.
Amends 9c63ad562b.
Change-Id: I0c77b07dc83969565480bbb9d9fc80751d4246b1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Not visible in QMake, because of too old C++ standard used to compile it,
but in the qttools copy. Fix here, as the authorative source, first.
Change-Id: I2552eccfaab2cef0863686dcd888f2a5f25ca29f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QChar currently is convertible from nearly every integral type. This
is bad code hygiene and should be fixed come Qt 6.
The present patch is the result of compile fixes from marking these
constructors explicit.
Amends 60ca2f5f7c.
Change-Id: I06887104d42f8327eb6196afcde5f942a74a6a78
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Conflicts:
configure.pri
Also required s/solid\.color/solidColor/ in a couple of places in:
src/gui/painting/qpaintengine_raster.cpp
Change-Id: I29937f63e9779deb6dac7ae77e2948d06ebc0319
The absolute paths of certain static dependencies can have spaces in
them. The _qt5_$${CMAKE_MODULE_NAME}_process_prl_file fails to handle
this, and simply replaces all spaces with semicolons, which obviously
breaks the list of dependencies, and a consuming application fails to
link with a message like:
LINK : fatal error LNK1181: cannot open input file 'C:\Program.obj'
This change partially restores the functionality that was added in
102e1822ff specifically the part
that changes qmake to export an additional variable
QMAKE_PRL_LIBS_FOR_CMAKE. This variable has the same content as
QMAKE_PRL_LIBS except it uses a semicolon as a separator, so that
CMake can correctly parse the separate lib entries.
This is much cleaner than trying to parse the original QMAKE_PRL_LIBS
variable with a complicated regular expression.
Amends eda28621f6.
Task-number: QTBUG-38913
Change-Id: I1d18fb779606505bc92320d8ce13232c7022e212
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
This reverts commit 224a60989e.
Turns out that we cannot just untangle the determination of
source root and build root, because this breaks the assumption
that every .qmake.conf results in a separate .qmake.cache in the
build tree. QTBUG-76140 must be fixed differently.
Fixes: QTBUG-76907
Change-Id: I5c0a3719d5e00a0f1cacad51651b47c1f284d22d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since commit 20e9422e we don't ignore exit codes when installing files
anymore. This patch does the same for meta file installation. We
really should be notified properly if something goes wrong here.
Task-number: QTBUG-18870
Change-Id: Ib6a20293380f400379b10ec767bf38dc74d5beeb
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
A recurring problem with the Q_NAMESPACE macro is that it declares
an object (staticMetaObject) in the surrounding namespace. That
object lacks any export/import qualification to make it usable
with shared libraries.
Introduce therefore another macro to work around this issue, allowing
the user to prefix the object with an exporting macro, f.i. like this:
Q_NAMESPACE_EXPORT(Q_CORE_EXPORT)
The old macro can simply then be rewritten in terms of this new one,
supplying an empty export macro.
Note that NOT passing an argument to a macro expecting one is well
defined behavior in C99 -- the macro will expand an empty token.
Of course, MSVC doesn't like this and emits warnings. As a
workaround, use a variadic macro.
[ChangeLog][QtCore] Added the new Q_NAMESPACE_EXPORT macro. It
can be used just like Q_NAMESPACE to add meta-object information
to a namespace; however it also supports exporting of such
information from shared libraries.
[ChangeLog][Potentially Source-Incompatible Changes] Prefixing
Q_NAMESPACE with an export macro may no longer work. Use the new
Q_NAMESPACE_EXPORT macro for that use case.
Fixes: QTBUG-68014
Change-Id: Ib044a555ace1f77ae8e0244d824ec473550f3d8e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
The Qt::Platform target includes the mkspecs/$spec directory, which we
must unconditionally install as long as we use it.
Change-Id: I272650a887b5b0b3bd868524784dca65b76b02d9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
This saves us lots of .toQString() and .toQStringList() typing when
qDebug()'ing qmake code.
Change-Id: I037e5e1816f2dcb6a20dec4c275f3d886f155ad5
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
'make clean' removed the import libs for DLLs which makes them quite
unusable. Move the import lib removal to the 'distclean' target.
Fixes: QTBUG-51977
Change-Id: I727d520435f88a83a7fb14cb0ad81f8fe7c6d61b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
Builds fail on Windows, due to splitting on ':' on absolute file paths,
when handling syncqt injections.
Revert for now to get qt6 merge in faster.
This reverts commit 7559d508d1.
Change-Id: If139a8a1eb4ae7ccc8d7b835b12e83b03176e28b
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
In case of a CMake superbuild, the actual install root in a non-prefix
build is the top-level build directory (not $TOP_BUILDDIR/qtbase anymore).
This is more in line how CMake lays out things by default.
Task-number: QTBUG-75582
Change-Id: I4e1744b5c877508fedc33e237eec28cb7436010b
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Instead of doing it just in qtbase/src, we need to do it
for all repos before building ./src.
Change-Id: I57f226b849cd5370ffbbbea8a694697d400957a4
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
That's an undocumented Qt 4/3/2 remnant, start remove usages.
Fix incorrect include header in qclass_lib_map.h as a drive-by.
Change-Id: I939be2621bc03e5c75f7e3f152546d3af6d37b91
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
for modules, plugins and tools only (i.e. no tests nor examples)
this mimics the qmake behavior
default value is developer_build
Comes with some fixes in qmake since it seems in the qmake built it was
not having Werror, now does because we built it with add_qt_tool
Change-Id: I6f3237f25a6fedefa958644929e90f13837a12df
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Otherwise, it can happen that parsing goes on forever in cumulative
mode.
Task-number: QTCREATORBUG-17656
Change-Id: If69f2265ac7eee0d230bd77a9aa9500e97ebeff6
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Flesh out copy-and-pasted code into a function and adjust the coding
style on the go.
Change-Id: I9b8a87d6dd5c33cc1ed9f613fe85daca52309369
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
We'll be adding calendar code here as well, and tools/ was getting
rather crowded, so it looks like time to move out a reasonably
coherent sub-bundle of it all.
Change-Id: I7e8030f38c31aa307f519dd918a43fc44baa6aa1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
MakefileGenerator::initOutPaths should only do that: init out paths.
It's not supposed to modify the content of input variables for extra
compilers. Those get "fixed" in MakefileGenerator::init below the "do
the path fixifying" comment.
The first "fixifying" would turn an absolute path in SOURCES (input
variable for the moc_source extra compiler) into a path relative to
the output directory. The second "fixifying" would mess everything up.
Fixes: QTBUG-76097
Change-Id: I8c50ef33d097dba4a1db76144c70b0677beffb6c
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Debug/release install targets can potentially install the same files which
leads to errors on install when running make with -j > 1.
If build_all is set, make the 'install' dependent of the new target
'debug-release-install' which contains the commands of 'debug-install' and
'release-install'.
Of course, debug/release is not hard-coded, but the content of the BUILDS
variable is used.
Change-Id: I67b504a95b83daf43bc89dcc0e3391b67e19c027
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
At the moment, Coin builds tests as a separate qmake invocation
against an installed Qt. We need to support the same with CMake.
Change the tests subdirectory to be a standalone CMake project when
CMake does not detect an existing QtTest target while processing the
subdirectory. If the target exists, it means we are building the whole
repo, if the target does not exist, we need to call find_package
to find the installed Qt.
Refactor and move around a few things to make standalone tests build
successfully:
- add a new macro to set up paths to find QtSetup
- add a new macro to find all macOS frameworks
- add a new macro to set up building tests
- add a new macro that actually builds the tests
- export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals
Config file
- export the CMAKE_BUILD_TYPE value, because a test project doesn't
have a .git subdir and thus defaults to be built in Release
mode, even though qtbase might have been built in Debug, so to
avoid the mixing, the propagate the build type
- stop overriding INSTALL_CMAKE_NAMESPACE and
QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because
the tests project doesn't specify a major version, and if we
override the values, the moc / uic targets don't get the correct
major version prefix and configuration fails
Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675
Fixes: QTBUG-75090
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The qmake code to read output from dependency-generation was adding
QByteArray values to a QString, thereby tacitly converting from UTF-8;
this is misguided. Hopefully, the command emits its output in the same
local 8-bit encoding that QString knows to convert from.
Simplified needlessly verbose loops (that violated Qt coding style) in
the process.
Fixes: QTBUG-75904
Change-Id: I27cf81ffcb63ebc999b8e4fc57abdb9a68c4d2b3
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
[ChangeLog][qmake] The CONFIG value c++latest was added to select the
latest C++ standard the currently used toolchain supports.
Task-number: QTBUG-75653
Change-Id: I22ddc9d293109d99e652b7ccb19d7226fca4716d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
src/corelib/tools/qlocale_data_p.h
(Regenerated by running the scripts in util/local_database/)
src/gui/opengl/qopengltextureuploader.cpp
Done-With: Edward Welbourne <edward.welbourne@qt.io>
Done-With: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change-Id: I12df7f066ed0a25eb109f61c4b8d8dea63b683e2
They will be deprecated, so qmake wouldn't compile anymore.
Change-Id: I42212fdf213df696d736ed34458f7e79bd902dd5
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Information about header files is cached by qmake. The key is the
filename of the #include directive. For system includes (<stdio.h>) this
is unique, according to the search order in INCLUDE_PATH.
For local includes, given as "foo.h", there may be name collisions. Usually a
compiler first searches in the directory of the current file (stored in the
sourceDir variable), and only in case of a miss the INCLUDE_PATH is
considered.
The dependency generation now distinguishes local header files by their full
relative path. This is implemented by forcing the use of the full relative
path as key into the SourceFiles data structure if the flag try_local is set.
Change-Id: Ifd75325b53496824054595f7fc98d71bbd9d8aa6
Fixes: QTBUG-72383
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
CMake will now generate config and target files for each module that
provides tools. As a result, namespaced global targets such as
Qt5::moc or Qt5::rcc can be made available.
Third party projects that require just these tools, and not the Qt
modules themselves, should specify CMAKE_PREFIX_PATH pointing to the
installed Qt location, and call find_package(Qt5CoreTools),
find_package(Qt5GuiTools), etc.
It is also possible to call
find_package(Qt5Tools REQUIRED Core Widgets) where the last option
is a list of modules whose tools should be imported.
Note that all the tools are in the Qt5::
namespace and not in the Qt5CoreTools:: or Qt5WidgetsTools::
namespace.
This commit also changes the behavior regarding when to build tools
while building Qt itself.
When cross compiling Qt (checked via CMAKE_CROSSCOMPILING) or when
-DQT_FORCE_FIND_TOOLS=TRUE is passed, tools added by add_qt_tool will
always be searched for and not built.
In this case the user has to specify the CMake variable QT_HOST_PATH
pointing to an installed host Qt location.
When not cross compiling, tools added by add_qt_tool are built from
source.
When building leaf modules (like qtsvg) that require some tool that was
built in qtbase (like moc), the module project should contain a
find_package(Qt5ToolsCore) call and specify an appropriate
CMAKE_PREFIX_PATH so that the tool package is found.
Note that because HOST_QT_TOOLS_DIRECTORY was replaced by QT_HOST_PATH,
the ensure syncqt code was changed to make it work properly with
both qtbase and qtsvg.
Here's a list of tools and their module associations:
qmake, moc, rcc, tracegen, qfloat16-tables, qlalr -> CoreTools
qvkgen -> GuiTools
uic -> WidgetTools
dbus related tools -> DBusTools
Task-number: QTBUG-74134
Change-Id: Ie67d1e2f8de46102b48eca008f0b50caf4fbe3ed
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Qmake should not rebuild all the code in QtCore, but currently it does.
When linking against QtCore, all the symbols get duplicated. A clever
linker will "deduplicate" the symbols again, so this actually works
with shared Qt builds, but it fails for static builds.
Do not rely on the linker being clever and just do not link Qt at all
for qmake.
Change-Id: I0f79ed9176a19ee884dd425e5f23c26cf69dc422
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Added a sentence to explain how a .qmake.cache file influences the project root.
Task-number: QTBUG-21411
Change-Id: I97766edd96851f1c988ab07f842fb81a339e4ecd
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This fixes the "could not parse compiler option" warning when
generating VS project files.
Fixes: QTBUG-75275
Change-Id: Idd98ae5fdb8ebf5a4e311cbb6cd3ed1daba74ca4
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Fix clang warnings that are disabled in the default build.
Change-Id: I4e773a24884db94acdc6c295d3f66da07cd8a5bd
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
QMake searches a .qmake.conf file to determine the source root of the
project, and a .qmake.cache to determine the build root.
If a .qmake.conf exists but no .qmake.cache in the build directory is
found, a build root would be set that is only valid if the build
directory is at the same depth as the source directory.
The invalid build root resulted in the creation of .qmake.cache files
at "interesting" locations (e.g. high up in the directory tree), a
potential cause for even more interesting build failures in the
future.
Fix this by splitting up the loop that determined build and source
root. Both are now determined independently of each other.
Fixes: QTBUG-76140
Change-Id: Ib5c922b87879fcf2f076298a69abcdbc4e8587b3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Those modules are TEMPLATE=aux, so they weren't triggering the file creation
here.
To make this work properly we have to:
- check for TEMPLATE aux in the right places
- add a dummy target to INSTALLS to actually trigger the creation
- initialize PRL_TARGET for aux templates
Fixes: QTBUG-75901
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Idce141629dd34287808bfffd159f92ac28c6c8b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Especially for header modules we don't want a 'Libs:' entry in their
.pc file.
Task-number: QTBUG-75901
Change-Id: I39037d3132e39dd360532e1425f794ebec28e0bd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMake code like
rplc.match =
QMAKE_PRL_INSTALL_REPLACE += rplc
led to the generation of invalid sed calls in the Makefile.
It is already actively checked for empty matches, but if *all* matches
are empty, the sed call looks like
sed foo > bar
which is invalid.
Task-number: QTBUG-75901
Change-Id: I173ed99826414dcf06253a15a247f7d067ee3977
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the whole value of 'name', not just the first element, and also
replace variables like ${QMAKE_FILE_IN}.
This fixes the file_copies feature (COPIES) for Visual Studio
projects, because for every entry in COPIES an extra compiler is
created with a name 'COPY ${QMAKE_FILE_IN}'. Before this patch the
name and the generated file filter would be just 'COPY'. However,
duplicate filters are being skipped by the VS project generator. All
but the first COPIES entry was ignored.
Fixes: QTBUG-76010
Change-Id: Icaa5d2cb8d88ae3ef8ce86220198bca1b9e673f5
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Invalid SUBDIRS values like
SUBDIRS += foo \
bar \ \
baz
would produce a Makefile with a sub-- target that will call the make
on the same Makefile again recursively, letting make run forever.
Ignore values like this and print a warning message.
Fixes: QTBUG-76068
Change-Id: I6ca0f8c8238249f1be02d8c311b4c148fd80e707
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
qmake automatically appends a dir_sep to a few directory paths (see
MakefileGenerator::initOutPaths), and various .pri and .prf files rely on
that. Anyhow, for non-MSys MinGW on Windows this creates a problem,
because mingw32-make will interpret the backslash in
OBJECTS_DIR = some_path\
to escape the following newline. We have been working around this
problem in various ways:
- winmakefile.cpp just removes the trailing \ for OBJECTS_DIR, at the
cost of not being compatible with logic in .prf/.pri files that rely on
the separator.
- winmakefile.cpp adds a '#avoid trailing-slash linebreak' comment for
DESTDIR. Anyhow, this does not seem to work for mingw32-make: If you
reference $(DESTDIR), the variable will contain trailing spaces.
- unixmakefile2.cpp duplicates a trailing \ for DESTDIR.
The last approach is now taken also for OBJECTS_DIR.
Task-number: QTBUG-75257
Change-Id: Ie8171a990a9ce1cfbf1b94037252ef2392313338
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Clang-cl couldn't find the header given to it by -FI when it isn't in
any of the included directories.
Additionally clang-cl 8 has a bug with exported templated classes with
inline methods that causes it to have missing symbols at link time. We
work around this.
Fixes: QTBUG-74563
Change-Id: I7becf05fa8edb07bd4cefe12bee3737e5e1dfa14
Reviewed-by: Yuhang Zhao <2546789017@qq.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The first replacement had missed objective-C++ code some places ourside
the src dir.
In C-files Q_DECL_NOTHROW is replaced with Q_DECL_NOEXCEPT as we still
need to turn it off when compiled in C mode, but can get rid of the old
NOTHROW moniker.
Change-Id: I6370f57066679c5120d0265a69e7e378e09d4759
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When installing directories, QINSTALL must not ignore contained hidden
files to be consistent with the old INSTALL_DIR.
Fixes: QTBUG-66835
Change-Id: I3a7c952dcac9732d5b17c5a258f87ca277b388d2
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The comment hints that it's fixing an issue in Visual Studio 2013, which
we don't support anymore.
In all supported Visual Studio Versions -Gm is actually deprecated
anyhow, and not set anymore by default. So I guess it's safe
to remove the special handling here.
Change-Id: I2e8ff85350ba651d9a763aabba7b6494ba88d82e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
...like the install commands before Qt 5.9 did.
This ensures consistent permissions. Also, we can throw away the code
that took care of removing and re-adding the read-only flag on Windows.
This reverts commit a0b5d6e60f with the
addition of preserving permissions when copying directories to properly
install app bundles (QTBUG-74912).
Fixes: QTBUG-74733
Task-number: QTBUG-74912
Change-Id: Iee6d7c5e86787dd3ada5e5e9441209d418100b1f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This reverts commit 3cdf46059a.
It seems change is causing regression & is reverted now to be able to
proceed with releases
Task-number: QTBUG-74912
Change-Id: Ib2365b96ee98fbbcc8853cc7f8726c157c1913a7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
...starting with Qt 5.0.0.
The text is manually inserted there, because \since does not work
within sections.
Task-number: QTBUG-74737
Change-Id: I0fe2d0a113d48be0266030c8466b062c6f743aab
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
For applications that set VERSION the installation targets of pdb
files were wrong in qmake's nmake Makefile generator.
Replace code that tries to reconstruct that target's versioned
extension with TARGET_EXT which already contains the fully resolved
target extension.
Fixes: QTBUG-74265
Change-Id: I9553a5f70170e077a59c866079ae51647ae80bef
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
...like the install commands before Qt 5.9 did.
This ensures consistent permissions. Also, we can throw away the code
that took care of removing and re-adding the read-only flag on Windows.
Change-Id: I06bc3af8817f18c016119fbcb7360800d6c129bd
Fixes: QTBUG-74733
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
- Fix qmake build
- Fix QtNetwork moc-ing, by including the moc files
inside the cpp files
- Fix sql odbc plugin by including QT_PLUGIN define
- Fix Boostrap to link against the Platform target, to get the
correct Unicode and WIN64 defines.
- Fix vulkan headers to be found
- Fix freetype bzip and png unresolved symbols / linker issues
when building minimal platform plugin (also need to make
sure to use the vcpkg toolchain instead of CMAKE_PREFIX_PATH
because then find_package is overridden, which does magic
to properly propagate static library dependencies).
- Fix qfilesystementry test not to be built without private
tests feature (it led to undefined symbols issues).
- Make sure to remove QT_NO_CAST_TO_ASCII define when building
QtCore, so that the qstringbuilder3 test builds
successfully.
Task-number: QTBUG-74140
Change-Id: I353d08392b604d55f8e62cdd8696d1e19a3c084a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Mark obsolete functions in QString as deprecated so they can be removed
with Qt6:
- QString::sprintf()
- QString::vsprintf()
Change-Id: I9b7748db95291c34b95ff3ad3e3aabc8215aeaae
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Commit 2327944d added the QMAKE_DEFAULT_LIBDIRS to the library search
paths without taking care that explicit library search paths should be
inserted before system search paths.
Copy the behavior of the UnixMakefileGenerator, esp. of commits
5bc9541e and e185f343.
Fixes: QTBUG-73959
Change-Id: I7e951f432bb5f71ce4bcdb18b7102b4380441181
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
QMake's strategy is generally "pretend everything is Latin 1", which
basically equals "do 8-bit pass-through". Change the handling of
QMAKE_SUBSTITUTES input accordingly to avoid conversion losses when
converting from and to UTF-8.
Fixes: QTBUG-72130
Change-Id: Id903bbd2afa99708c92fd09fab3db944aa819a94
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Two changes were needed:
- correctly link against frameworks
- use qcore_mac.cpp instead of qcore_mac_objc.mm, because we don't
link against AppKit
Change-Id: Ibd9d6d367a7fcdf7dce277c1b06d36c491294eeb
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Visual Studio doesn't support files being in multiple filters and
refuses to load such projects. Source files that appear in variables
that are mapped to file filters (SOURCES, TRANSLATIONS, ...) must not
be added to a second filter if they are input for an extra compiler.
Fixes: QTBUG-74004
Change-Id: Id2d752059c98d04e8154a7848c91f29a94bd092a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Use the writeDefaultVariables method also for the
Win32MakeFileGenerator. Remove the initializations that are already done
in Makefile::writeDefaultVariables.
Change-Id: I590cc5d7031de67dd830e6113849ab080dbf2325
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
This is in preparation of deprecating QLinkedList.
There is but one substantial change: Instead of copying the linked list,
we move it now, and instead of copying items between these two lists, we
use std::list::splice(), which just relinks nodes. It is a bit surprising
that the comment on the ProValueMapStack suggests references into the
container must remain stable, and then some code changes addresses by
making copies of the elements.
This was probably a bug waiting to manifest itself.
Since nothing else in qmake is using QLinkedList now, remove qlinkedlist.o
from the qmake build.
Change-Id: I08a5b0661466bf50ad8f9f8abf58bc801aef4ddc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is preparation of moving from QLinkedList to std::list, which is in
preparation of deprecating QLinkedList.
Change-Id: Ief259bc8c7178be5ca04812c6890cf65d86c069d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Users should use range constructors instead to do the conversion.
Keep conversion methods between QList and QVector as these will turn
into a no-op in Qt 6, whereas forcing people to use range constructors
would lead to deep copies of the data.
Change-Id: Id9fc9e4d007044e019826da523e8418857c91283
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
As the non prefixed variants are deprecated
Change-Id: I2ba09d71b9cea5203b54297a3f2332e6d44fedcf
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QRegExp includes can be found in several files where there's not even a
use of the class. This patch aims to avoid needless includes as well as
follow the "include only what you use" moto.
This patch removes a QRegExp include from the QStringList header which
means that there is likely going to be code breaking since QStringList
is used in many places and would get QRegExp in.
[ChangeLog][Potentially Source-Incompatible Changes] qstringlist.h no
longer includes qregexp.h.
Change-Id: I32847532f16e419d4cb735ddc11a26551127e923
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of hardcoding the target's extension to ".exe" we should rely on
target information available in Visual Studio. $(TargetFileName) is
documented as "The file name of the primary output file for the build
(defined as base name + file extension)." so it can be used instead of
$(TargetName) together with ".exe".
Change-Id: I103d8d13456910617b2d53c9c8f4e2935eb93015
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Conflicts:
tests/auto/widgets/itemviews/qheaderview/tst_qheaderview.cpp
Added tests/auto/testlib/selftests/expected_crashes_5.txt to work
round the output of the crashes test (which exercises UB, see
QTBUG-73903) being truncated on one test platform.
Change-Id: I9cd3f2639b4e50c3c4513e14629a40bdca8f8273
MSVC managed to trigger the this != &other assertion in
QString(const QString &other); so just skip creation of the
intermediate string in the function whose body tripped over this.
Change-Id: I687003cfc588531018c6069863ce2a76078c8e3f
Fixes: QTBUG-73802
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
make it "last one wins", consistently with regular libraries. this
isn't really relevant in qmake, because the order matters only for
static frameworks, which qmake defines out of existence.
note that specifying frameworks by full path does not work, so we
don't need to amend 9d76beee5 in that regard.
Change-Id: Ib027109339e1b5973c577d69906b6daf83ba9611
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
IoUtils::isRelativePath() didn't attempt to consider UNC paths, due to
a belief that qmake fails on them so badly that it wasn't worth the
extra code. However, it turns out Qt Creator's copy of this code does
need to take this into account, so start the change off in qmake's
version so as to keep in sync.
Task-number: QTCREATORBUG-21881
Change-Id: I3084b87c1d3ca6508255e94e04ac8db3ceaebb7e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
QMake ignored every extra compiler that sets variable_out and whose
output does not have a builtin compiler (C++, C).
What the code wants to achieve is to ignore extra compilers that put
their output into variables that are handled "somewhere else already",
e.g. are in the otherFilters list. Evidence for that is to be found in
the addOnInput == true if branch.
Task-number: QTBUG-71283
Change-Id: I8c1d76febccacb450cd14ad7a1f4b87726832312
Reviewed-by: Brett Stottlemyer <bstottle@ford.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Use xilink for ICC and lld-link for Clang.
Change-Id: I13c74339ae9e3e5c97210afd20a53c7e474b873b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Pick up mkspecs/ from the top-level project (qtbase) directory
Change-Id: I78c69f31219484cc7eaa408b0a7e3eeaa0ac6cf2
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
If the user changes the .pro file, the Makefile is supposed to be
re-generated by calling qmake again. NMake however lacks a "Makefile
remake feature" like GNU make has.
The generated Makefiles for nmake however have already a proper
Makefile target that can be used to re-generate the Makefile. What was
missing is the dependency from an entry-target in the meta-Makefile.
Now changes in the .pro file trigger a re-generation of
Makefile.Debug/Makefile.Release when calling nmake without target
arguments or with "debug" or "release".
Fixes: QTBUG-29193
Change-Id: I9f2dd5deba4a043ab6c9502bb0b0ba83dc843612
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
With Qt 6 in sight, people need to start moving away from
their deprecated APIs, as we want to remove them all in 6.0.
We are marking deprecated APIs with deprecation attributes,
but by default we're disabling deprecation warnings, making
them an opt-in by the user.
We need to do the opposite: make deprecation warnings enabled
by default, and have an opt-out define.
[ChangeLog][QtCore][Important Behavior Changes] Qt now
enables by default warnings when using APIs marked as
deprecated. It is possible to disable such warnings by
defining the QT_NO_DEPRECATED_WARNINGS macro. The old
QT_DEPRECATED_WARNINGS macro which was used to enable
this warning now has no effect (warnings are automatically
enabled).
Task-number: QTBUG-73048
Change-Id: Ie2b024fd667eb876b6ac9054cbbbc5a455cb9d5c
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QFile/QFileInfo::readLink() functions are obsolete but were not marked
as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: I52424dc5441e1f5b01015713df990bbec5186caa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
On macOS, if an extra compiler returns a framework include via its
depend_command, we must resolve it properly.
For example, the uic extra compiler might return an include
"QtQuickWidget/QQuickWidget", but the actual header file is located in
"QtQuickWidget.framework/Headers/QQuickWidget".
Fixes: QTBUG-72641
Change-Id: I42f11c74d01c88db8a32025b7f04d9ad50b2d08b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Factor out a resolveDependency method.
We will enhance it in a subsequent commit.
Change-Id: I4eead8bd03066c2ccbc9d9276acbc9f6c3bc6b97
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Default libdirs are never added to the modules' LIBS and if
Qt was configured to use one of the default libdirs, module
might end up without any path to search for its prl files.
Add default libdirs to the search path similar as it's done
in unix/makefile generator.
Fixes: QTBUG-72855
Change-Id: I43c5bae0d54ba9427ab0ad3eab61ba0c4e2cbde8
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
rather than reproducing vcvarsall.bat's functionality as hard-wired code
in the nmake generator, just invoke the actual script from
toolchain.prf. this is much easier, more future proof, and - critically
- makes the detected variables available to configure's new library &
header search facilities.
[ChangeLog][Important Behavior Changes][qmake][WinRT] Cross-builds will
now ignore pre-set values of %INCLUDE% and %LIB% when building target
executables. If necessary, use configure's -I and -L switches when
building Qt, and pass QMAKE_INCDIR and QMAKE_LIBDIR on qmake's command
line when building own projects.
Change-Id: I36f53e8880d6523f3f6f7a44d40d87d04bd06854
Reviewed-by: Thomas Miller <thomaslmiller91@gmail.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
because QMAKE_EXTRA_VARIABLES sometimes just ain't enough.
Change-Id: I739e5b6510e4701ca0a86834e4f9a978d7ef1cf4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Also blacklist tst_QRawFont::unsupportedWritingSystem() and
tst_QGlyphRun::mixedScripts() on windows for now.
Conflicts:
qmake/generators/makefile.cpp
src/corelib/itemmodels/qstringlistmodel.cpp
src/platformsupport/fontdatabases/windows/qwindowsfontengine_p.h
tests/auto/corelib/itemmodels/qstringlistmodel/tst_qstringlistmodel.cpp
tests/auto/gui/text/qglyphrun/BLACKLIST
tests/auto/gui/text/qrawfont/BLACKLIST
Task-number: QTBUG-72836
Change-Id: I10fea1493f0ae1a5708e1e48d0a4d7d6b76258b9
Hardware and camera button handling are phone specific APIs we no longer
support in Qt.
Change-Id: Ib11f894a426b8e4b71acf24876437ddab2cea548
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
... so we don't get into situations where a target has a relative path,
while another target depends on it with an absolute path.
Task-number: QTBUG-36768
Change-Id: Icc5b249914bb3f095f4a6542c30bacf5ea6f9ec9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Since some files are still executable (such as bash scripts) then they
should not get strip called on them when installing in those cases.
So by adding .CONFIG = nostrip, it indicates that strip should not be
called on this.
Fixes: QTBUG-60751
Change-Id: I19d502c07644daf9d487a8817c8e57d96eedab60
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
this makes no difference whatsoever, because qmake isn't actually built
in a namespace, but it makes the new qtc code model happy.
Change-Id: I70ad8e16cceff73276a821219fc80bab365954b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... which are specified by full filepath, by making the de-duplication
consistent with that applied to libs specified with -l, that is, last
one wins.
the problem existed "forever", but it became more visible after the
recent configure changes.
fwiw, Win32MakefileGenerator is not affected, because it has the
opposite problem: it de-duplicates everything (including object files)
in "last one wins mode". it might make sense to change that as well.
Change-Id: Id7ef1d394fcc9d444450672c06a6f11af2b19eab
Reviewed-by: Robert Griebl <robert.griebl@pelagicore.com>
Consider the following source tree:
foo/narf.cpp
bar/narf.c
bar/gnampf.cpp
The .pro file has
SOURCES += foo/narf.cpp bar/gnampf.cpp
The file bar/narf.c is not supposed to be built for whatever reason.
QMake's nmake Makefile generator generates inference rules of the form
{.\foo}.cpp{debug\}.obj::
...
for every source subdirectory and every source file extension.
Thus, we have
{.\foo}.cpp{debug\}.obj::
{.\bar}.cpp{debug\}.obj::
{.\bar}.c{debug\}.obj::
Depending on the exact execution order of the inference rules (which
depends on the names of the files) the latter rule might get picked,
and we're erronously compiling bar/narf.c even though it's not
referenced in the .pro file.
Conclusion: QMake's detection of conflicting source files must
consider the base names of source files, and not the exact file names.
Fixes: QTBUG-72059
Change-Id: I50c2725ae2a7421053369a10680230f571af00ea
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
'=' cannot be handled in the same manner as other "critical" characters
as no amount of backslashes will escape it. Use a variable instead.
The documentation for nmake suggests that '=' in file names is not among
the "Special Characters in a Makefile". Therefore, we assume nmake can
handle it and don't escape it.
Fixes: QTBUG-67262
Change-Id: Ib60f808d7d4e981c98f7d8bf2075d55b2b7f3b7d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Michael Brasser <michael.brasser@live.com>
The read from a QHash needs to be protected too if other threads are
writing.
sync-up with qtc, no actual effect on qmake itself.
Fixes: QTCREATORBUG-21416
Change-Id: I75e5634e11b10056d6dbb6fdceef482ca2222ca1
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
(cherry picked from qtcreator/5f79b5d2e5e33321cdcd00362f0d6d9442a73ec2)
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This will be the only options for Qt 6, so make sure the code compiles now.
Change-Id: I23f791d1efcbd0bd33805bb4563d40460954db43
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The CONFIG value precompile_header_c was ignored in the VS project
generator. Add a member VcprojGenerator::pchIsCFile that is set to
true if precompile_header_c is active.
The code in modifyPCHstage had to be rearranged to separate the three
parts for stable.h, stable.cpp and other files.
Task-number: QTBUG-62821
Change-Id: I340eb165baa22cafcb64815cf223ce9a21aca558
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Merge two nested if blocks.
This reduces the diff size for a subsequent commit.
Change-Id: If60938077169fc6686329cc5c30ebc97ada013a1
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
There's no point in having it, and this will reduce the diff of a
subsequent commit.
Change-Id: I3d27d6808c585b87a44df2499f2fcea4331befbb
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Those names are a better fit as we want to support C precompiled
headers in a subsequent commit.
Change-Id: Ie3f852da945b9b2cf0e363c81f1a4b3063f27372
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
[ChangeLog][qmake] Introduced the variables
WINDOWS_TARGET_PLATFORM_VERSION and
WINDOWS_TARGET_PLATFORM_MIN_VERSION for overriding the default values
of WindowsTargetPlatformVersion and WindowsTargetPlatformMinVersion in
Visual Studio project files.
The code to determine the default values is moved to qmake feature
files. A common/windows-desktop.conf file is introduced for variables
common to all non-UWP Windows mkspecs.
The package_manifest feature uses WINDOWS_TARGET_PLATFORM_VERSION as
default value for WINRT_MANIFEST.minVersion, and
WINDOWS_TARGET_PLATFORM_MIN_VERSION for
WINRT_MANIFEST.maxVersionTested respectively.
Task-number: QTBUG-53654
Change-Id: I251ec7f9b804c9bc9f7d571f5b43d52b2a2d99d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Allows a qt build to be configured to target arm64 desktop apps cross
platform and build them with nmake.
Change-Id: I99fed12047b45a504a1644201bcc19b18c69f3e6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The assert still happens on MSVC 2015 64 bit when running
qmake -tp vc -r.
This reverts commit f4169a633b.
Fixes: QTBUG-71228
Change-Id: I05bd3e0677414edb970f07e0555cdc95ce32f592
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Also clean up QTextCodec usage in qmake build and some includes
of qtextcodec.h.
Change-Id: I0475b82690024054add4e85a8724c8ea3adcf62a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This allows others to link to QtDBus and the other libraries/tools using
doxygen.
Fixes: QTBUG-60933
Change-Id: I026895a432a328f224c40cf231ad12d109dc648f
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Martin Smith <martin.smith@qt.io>
The correct name is c++1z. Anyhow, this is easy enough to get wrong,
so make sure CONFIG += c++17 works as well.
Task-number: QTBUG-67527
Change-Id: Iea26b18824b38b1b5170f85987cf5c750b8e10ab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: André Hartmann <aha_1980@gmx.de>
it must end up in front of QMAKE_LIBS{,_PRIVATE}, but not of
LIBS{,_PRIVATE} (which are preceded by QMAKE_LIBDIR).
Task-number: QTBUG-61982
Started-by: Liang Qi <liang.qi@qt.io>
Change-Id: Id3de01ee0e9b66af02f79949aeb5a0eabd55363f
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
the early merging of LIBS* into QMAKE_LIBS* meant that we could not
interleave them properly. defer the merging until the points of use.
Task-number: QTBUG-70779
Started-by: BogDan Vatra <bogdan@kdab.com>
Change-Id: I890f98016c3721396a1f0f6f149a9e2b37d56d8e
Reviewed-by: Liang Qi <liang.qi@qt.io>
it's unused now, and just complicates matters. its interaction with
LIBS_PRIVATE & co. has always been a bit shaky. google produces no
public hits outside qt itself, so let's assume it really remained
internal.
Change-Id: I6606bbabd44f1b76d84e97219e155e38d6f1b3a6
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
this was introduced in 2002 supposedly for qnx4, but doesn't appear to
have actually been used ever. remove it, as it's in the way now.
Change-Id: I54dcabb61e1d3609a1e7a9fa4ff4b25509cfdb7a
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
lld for coff/mingw doesn't support linker scripts, which qmake used
for passing larger numbers of input file names to the linker.
Instead of using a fullblown linker script for this, just use a plain
response file, which both lld and binutils ld support.
Change-Id: I3aace7902fa6ca861a0a9fe67feaa236e7ea417b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Remove the DefaultCharIsUnsigned member and XML property because the
MSVC project file no longer has a specific XML tag for that setting;
instead, the /J option should go directly into the AdditionalOptions
tag.
Task-number: QTBUG-69611
Change-Id: I8f386427b7384ae09553f66193a2c9ea2b98dbc8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The fix was for MSVC2010 which is now no longer supported
and causes a warning:
msvc_vcproj.cpp(217,12): warning: unknown pragma ignored [-Wunknown-pragmas]
#pragma optimize( "g", off )
by clang-cl.
This reverts commit 9f54846d95.
Task-number: QTBUG-63512
Change-Id: I395b964d09ac04a7dc852e43d7d95669948eea52
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
instead of trying to reverse-engineer it from the final target including
extension and possible bundle path, construct the basename explicitly.
this avoids that we mangle the filename if the actual target contains a
period for some reason.
Task-number: QTBUG-70097
Change-Id: I0bae9f010ab82e258680830250f8e28656f09d67
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
turns out that flushing the ids together with the ProFile cache was an
abysmal idea, as the latter expires after a few seconds after loading
the project, while references to the ProFiles (and thus the underlying
file ids) are kept for as long as the project stays loaded. the early
flush would cause re-use of the file ids, which would wreak all kinds of
havoc when re-loading projects.
but just ref-counting the vfs class is insufficient as well, as then the
ProFile cache (which expires after a timeout) could outlive all VFS
instances and thus refer to ids which were discarded and later re-used.
so we ref-count, and additionally let the cache instance hold a
reference to the vfs class.
this is sync-up with qt creator; no actual effect on qmake itself.
amends 190aa94be.
Change-Id: Idd4478ffc1c2405b3b83df32fba45b1f687f6a18
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
(cherry picked from qtcreator/d03fb350672d311dccc06f0bcb4da744a3c99745)
(cherry picked from qtcreator/1ddfb443b686ef04cc0e28363308ce70d01f0d73)
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For single config mode (no debug_and_release) extra compilers wouldn't
get added to the vcxproj file.
Single config mode creates a temporary project, and that was incomplete.
Multi config mode, on the other hand, directly operates on the "real
data" and wasn't affected by this problem.
Task-number: QTBUG-69769
Change-Id: I9cd942e43d80adbeac9a3c8fbe1a5766bc9645a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A switch statement using enumeration type midlErrorCheckOption as
condition had an enumeration value from type midlStructMemberAlignOption
as a case label. This had only coincidentally the intended effect, since
the intended value (midlErrorCheckOption::midlEnableCustom) and the
actually used one
(midlStructMemberAlignOption::midlStructMemberAlignOption) have both
the value 0.
Change-Id: I73b337f23e733a1a6fb80517e29365e01838238a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Generated C++ source files with extensions other than .cpp would not get
compiled, because the code ignored all other C++ source extensions like
.cc and .cxx.
Fix this by respecting the value of QMAKE_EXT_CPP and QMAKE_EXT_C.
Task-number: QTBUG-69770
Change-Id: I097dfef6920e353a351c97891cdbfdc9a859815f
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
qt creator's clang code model is a bit more picky than the old one, so
we need a project that approximately works.
while we're at it, inline qmake.pri, add some missing files, and
beautify the source lists.
Change-Id: I87ca1db2ee3e55ea08e4c23f7913e882ab44fd21
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Some distributions do not define MINGW_HAS_SECURE_API globally,
resulting in methods like wgetenv_s not being declared in the
headers.
This is probably to keep compatibility with Windows XP. Anyhow,
we don't support Windows XP anymore, so we can safely add the
define.
Note that this is not necessary for the mingw-builds distro,
which is the only one we test and support. Anyhow, I don't
see any risk in adding these for other distributions.
Diff was provided by Philippe Dunski in the bug report.
Task-number: QTBUG-67443
Change-Id: I3a64b11541fe95e527ed44bbf8ad94469d457d3d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We now treat -o foo/bar/baz as a request to generate the output in the
foo/bar directory with baz as the output name, or if foo/bar/baz is already
a directory, in the foo/bar/baz directory with the default output name.
We take care to handle generator specific directory structures, so
that the project directory does not get merged into OUT_PWD. This is
done in runQmake(), before parsing the project file, so that OUT_PWD
will be correct during project parsing. The individual generators are
then passed the filename relative to the final output directory.
Each generator now also makes sure to add the right project suffix
to the output file, so -o foo will result in foo.pro or foo.vcproj,
instead of just foo.
Task-number: QTBUG-44408
Change-Id: I26990cec0c0458bee2b88dbb86322617a85f54b5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Makes it a bit more clear why all the Xcode settings were lost.
Task-number: QTBUG-45113
Change-Id: I3b19edb02a24673f56e77d3a1fb7cc76584c73fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
CONFIG+=lrelease enables that all .ts files in
TRANSLATIONS or EXTRA_TRANSLATIONS are compiled by
lrelease.
EXTRA_TRANSLATIONS is a new variable that is only
processed by lrelease, but not lupdate - this
is useful for translation files that are supposed to
be empty, because they match the language of the
original translation sources.
If embed_translations is also set, the generated .qm
files will be made available through the Qt resource
system under :/i18n/. Alternatively, the user can
specify an installation target by setting
QM_FILES_INSTALL_PATH.
Note that relative paths in TRANSLATIONS are not taken
into account. That is,
TRANSLATIONS = component1/de.ts component2/de.ts
will cause a conflict.
[ChangeLog][qmake] New CONFIG options lrelease and
embed_translations were added. CONFIG+=lrelease does
run lrelease on translation files listed in TRANSLATIONS
and EXTRA_TRANSLATIONS. CONFIG+=embed_translations does
include the generated .qm files as resources under
:/i18n/.
Change-Id: I94db5b8431d07b24f59b2c332ede91450f9c0c58
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
this allows for dynamic generation of the dependencies.
Task-number: QTBUG-61267
Change-Id: If5b8aed6b9e4bde189cc3ba6a5f13dcf8def3a1e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It's 160ish lines and adequately isolated. Still, it *might* be
contributing to compilers being slow (unlikely though that seems) so
seemed worth tidying up anyway.
Task-number: QTQAINFRA-2117
Change-Id: I9e55e677552c273fdf3480ccefc229fd6fd2b66a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The Xcode project name may be affected by e.g. the -o argument to qmake,
so we can't assume it's based on the target.
Change-Id: Ibb9f4265017ffcfe26bd8734758dcb30237c704f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts the following commits:
d12d2949d126c3bec09b49b08f96e8
We can't easily predict all code paths for QDesigner
with such a microoptimization. We also don't want
to generate three different string constructions
depending on some sophisticated heuristics.
[ChangeLog][uic] The -no-stringliteral option is now deprecated and
UIC will not generate QStringLiteral anymore.
Task-number: QTBUG-65251
Task-number: QTBUG-51602
Change-Id: I34a5a1934a8df19c5c84ac2ba8e5168ce5665037
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the variables are quoted correctly for commands, which is incompatible
with quoting for dependencies under mingw. so insert the paths as
literals, where we can control quoting.
this fixes building in directories with spaces, which i broke in
7c34e0a7b by using different quoting styles for deps and commands in the
first place.
this breaks the hypothetical use case where somebody wants to override
TARGET or DESTDIR (or DESTDIR_TARGET under windows) on the *make*
command line. not sure why anyone would do that - just do it at the
*qmake* level.
we did not get rid of OBJECTS, because that would cause significant
duplication in the makefile (not that it would matter too much, given
the dependency lists ...). this isn't a problem, because these are
short relative paths which are not expected to contain "funny"
characters.
an alternative would have been to change the variables' quoting and
eliminate them from the commands instead, but that would be
backwards-incompatible, because commands are "user-servicable".
for the same reason, we cannot get rid of the variables entirely.
Change-Id: Ic7592c7fc67d8b7d2b64de80808365cd1c3f79d0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
under windows, libraries can have a numeric suffix derived from VERSION,
and (under MinGW) a unix-like "lib" prefix - neither of which .prl files
have. therefore, we had to make the back-mapping from the library to the
.prl file reverse-engineer the original TARGET's name. we verify whether
we actually got the right file by comparing the target specified inside
the .prl file with what we started from.
this fixes linking of transitive deps of static deps.
the alternative of changing the .prl naming pattern to avoid the
back-mapping was discarded, as a) it would be backwards incompatible and
b) it would break project-internal -lfoo references to versioned libs.
Change-Id: Ia9b899fe6a5700fee528bd1dacf130caf083cdd6
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
if the file name contained no dot, but the path did, we'd chop up the
path in a final (doomed) attempt at locating a .prl file.
Change-Id: Iad72428d8523f2ea7e543faa58225fba4ffa358b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
add a parameter that indicates whether the passed filename can be only
the basename of a prl file. if so, we can skip the other attempts at
interpreting the file name. that's not only faster, but also clearer.
Change-Id: I6f6da3f4485216021282a08acaefb53e60e7242a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
move the logic for trying different extensions to
MakefileGenerator::processPrlFile(), which is the only user of that
functionality. that makes findLib() rather trivial and a bit of a
misnomer, so rename it to checkLib().
Change-Id: If9738cc17367452853ab8d3866fa36b5d4b57213
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
only .prl is actually supported (and we expect this to remain the case),
so just simplify the code.
Change-Id: Ia23f9f257bf89ca214c3deabd8a7744b155c7aa9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
in principle, it would be good to be able to read libtool .la files as
an alternative to our "proprietary" .prl files. however, this code was
disabled 15 years ago, three months after being written and never
released, and apparently no-one was missing it.
Change-Id: Ib8b4b4017b6a611f78af4e357ebce4006567e6ab
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
this code operates way below the level integrating with a package
manager makes sense. consequently, remove the "TODO item".
support at a higher level is actually implemented anyway.
Change-Id: I8e1e43911dd40aa7585e49c1ad1e37b999779308
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
For some reason, the solution generator was looking for the xcodeproj
files in the source tree. It should look for them in the output tree
instead.
Task-number: QTBUG-69244
Change-Id: I7525886d614ddfdee705b27aacafc8f90a6f9d1d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the code ensures that the path ends with a path separator, which is
unhealthy under mingw when the command ends with that path, because it's
interpreted as a line continuation.
the easiest fix is just duplicating the name of the moved file to the
destination side.
the cleaner fix would have been cleaning up the path separator mess, but
that's a more invasive change and doesn't seem worth it.
Task-number: QTBUG-69255
Change-Id: I338f8997b84ed7049b5665872dd25f90b9d4d16a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Qmake accidentally replaced all occurrences of the library name in the
build path. This would lead to problems if the (shadow) build path also
contains the library name.
Task-number: QTBUG-69279
Change-Id: If99acccc779ff0874433b193be7e7fc53625b245
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The compiler was generating some vectorized code for qresource.cpp but
it wasn't very efficient. So improve upon it and make use in other
places where we read UTF-16BE strings.
[ChangeLog][QtCore] Added an overload of q{To,From}{Big,Little}Endian
that operates on a memory region.
Change-Id: I6a540578e810472bb455fffd1531fa2f1d724dfc
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
make sure the access is properly scoped and does not recurse.
Change-Id: Iaa345cd2771811281b9ed6f634c70235a78c3c33
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
at the time this patch was conceived, it was meant as an exercise in
getting rid of usages of ProString::toQString(m_tmp). however, this was
meanwhile superseded by use of toQStringView().
but the change itself should have been done a long time ago already, and
there is no harm in going through with it.
on the way, this also unifies and fixes some of the error messages.
Change-Id: I337aff994c508df783df4794c3fa0762d83a691b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
these characters can appear in file names, but are meta characters in
dependency context. they have different semantics in make commands, so
this required some reshuffling in the windows generator (which just
treated dependencies and commands the same way).
we don't actually escape colons for nmake, because it has magic
treatment of drive letters anyway (and colons cannot appear elsewhere).
also, if a target's filename gets quoted, batch rules will blow up.
therefore, "funny" file names are really only supported as inputs -
which is just enough to make resource embedding work.
Task-number: QTBUG-22863
Task-number: QTBUG-68635
Change-Id: I473b0bf47d045298fd2ae481a29de603a3c1be30
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The macOS framework build of Qt copies headers to each
framework instead of a centralized include location.
Update the .pc file generator to match this behavior.
Add two include paths to the .pc files:
-Ipath/to/lib/foo.framework/Headers
This makes #include <FooHeader> work.
-Fpath/to/lib
This makes #include <Foo/FooHeader> work.
Task-number: QTBUG-35256
Change-Id: I013ce161c904fe6b7bbb03e33c163d32fdda0647
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
/System/Library/Frameworks is now under system integrity protection
and is not usable for 3rd-party framework installs.
/Library/Frameworks continues to be a documented framework install
locaton.
Change-Id: I26f96ed57985218452ebbf9578e08f04b4e5cfd8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The QMAKE_MANIFEST variable was ignored for VS linkers that support
the /MANIFEST:embed option.
Task-number: QTBUG-59967
Change-Id: I1cdb60ec3a7a5f117942952d4632378ff142daa5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The default value for CONFIGURATION_BUILD_DIR includes EFFECTIVE_PLATFORM_NAME,
but when overriding it in 554e44b77 we only used the CONFIGURATION variable.
This left the .app in iOS builds in Debug instead of Debug-iphoneos,
breaking deployment from within Qt Creator, which had this directory
hard-coded.
We now include EFFECTIVE_PLATFORM_NAME to restore the original
destination for the .app bundle.
Task-number: QTBUG-68705
Change-Id: If304193d3e351e19fb84d250a62ae331af6966c6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
... and make it explicit where we can't do that for semantical or
backwards compat reasons.
most urgently, this fixes an assertion failure when $QMAKEFEATURES
contains empty paths (e.g., due to a trailing semicolon).
notable observation: QByteArray::split() has no argument for the split
behavior (it always keeps empty parts).
Task-number: QTBUG-47325
Change-Id: I72d4b2e154a2ed1802cfa98fb4a5211a68e43231
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The output directory may be the same as the source directory in
the case of an in-source build, but Xcode treats the SYMROOT as
a build directory, and automatically excludes it from Time Machine
backups, which may result in not backing up sources.
Instead we map SYMROOT to an .xcode subdirectory of the output
directory, and then use CONFIGURATION_BUILD_DIR to make sure
the final build targets end up where they used to.
Task-number: QTBUG-52474
Change-Id: I3852ca9088e75ca62fca4c1217b5485175d9436f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
the dependency paths are fixified against the output directory, so we
must resolve them accordingly.
Change-Id: Id92750aad358153bd2db5daca3194c54eda58dbb
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We need to take into account the presence of a possible ',_debug' suffix.
Change-Id: I5655394b78723bbc6cc32e56849acc2366d288e2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Fixes the default C version used with gcc < 5
Change-Id: I948dece961caed8e6b181e1c6e6b9dc43c46583e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the source file must not be written with an absolute path to the
makefile, as this won't match the name of the target which generates it,
thus leading to an unsatisfied dependency.
this is the proper fix for QTBUG-60413 and a bunch of others.
amends historical f173e217cd.
Change-Id: I28140351c4b4759de35e60daf63bc54b82d104ec
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This fixes qmake-generated project files for Visual Studio 2017 for
setups where the Windows 8.1 SDK is not installed.
Task-number: QTBUG-66265
Change-Id: I67712019f7142e40262f171eb23f9f1e6ab3a251
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
sync-up with qt-creator; no effect on qmake.
Change-Id: I7555de5c72a9250b31e20fc60e39680d19882fcb
(cherry picked from qtcreator/2cb7c81e620d224d386860a637dc889acb15435e)
(cherry picked from qtcreator/89868ee2b9093ecf40602ae302b991d6a60014b0)
(cherry picked from qtcreator/03e699ce2985eedcd33d247aa47d04b14bc4bc04)
(cherry picked from qtcreator/61419e7bf0f3bff6dcf63876b05b72c56e60c2a8)
(cherry picked from qtcreator/19eaf87ef95a510351557119a955223a4aeea7b3)
(cherry picked from qtcreator/3080bda0661989e88dfa62101b4c3f5d5e6754a1)
(cherry picked from qtcreator/99714239b616e628ff4e0afe3db7eb7511ccf569)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
sync-up with qt-creator; no effect on qmake.
Change-Id: I926bc97fe6fa510ac5a8fe77b64014333a69bd04
(cherry picked from qtcreator/8a69c254757eab7852443b5e4bd5eafb68908d3d)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
sync-up with qt-creator; no effect on qmake.
Change-Id: I34b42bd19e0de973deb2291e91f306d1ca7c630e
(cherry picked from qtcreator/15148d8e4454ff3277131ea52a4204c5fa0b7ab0)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
sync-up with qt-creator; no effect on qmake.
comment on cherry-pick: this is actually a lot more than a cherry-pick,
because the dual VFS needs to deal with the file ids which were
concurrently introduced on the qmake side.
Change-Id: I2c1eb16c97526fa275a1c6a2eae9266d385859ac
(cherry picked from qtcreator/424639ecac9d2e404d2bfaff7f46b45ed98664b8)
(cherry picked from qtcreator/a8010b0fff47d903d4a1f80e3adb1a2ef41beb33)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
it now does not see anything except regular files and directories any
more. that's not expected to be a problem, given the function's scope.
Change-Id: I53063ad8cacb3afe5cc1baf6d6d5feba3465e74f
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
(cherry picked from qtcreator/cf82f210804151452fce3cddb3cb2793dab976eb)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
when the QFile object is already constructed, querying whether the file
exists is actually cheap, so do it right away instead of later on
demand. that makes the calling code a bit cleaner.
fwiw, that we need to explicitly query the file's existence at all is a
result of QFile's completely useless error "codes" (which merely say
which function failed, as if the caller would not know).
Change-Id: Ifec39d05b1713d8128046f679287e510f10e45dc
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
(cherry picked from qtcreator/5ba32e3484ead2e35cc7732dcd59a97e7459dbfd)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
just a sync-up from lupdate; no effect on qmake itself.
alternative source: qt-creator/7e86b98836342035684cc1c1aa49292224faed07.
Change-Id: I5e10b44637d527799f55c578a99076eb4750f131
(cherry picked from qttools/8e7e60dbdea04c943bc6d50290db12d3fefd39f2)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Thanks to QTBUG-61373, this qmake function was called with
/usr/local/5.10.1 as baseDir, which isn't absolute, leading to an
assertion failure. We could raise the error within qmake but it
proved easier to simply resolve any non-absolute baseDir using PWD,
before trying to use it as an absolute path.
Did the same for $$absolute_path(). Documented both. Adjusted the
assert that caught this to report any non-absolute path that upsets
it. Added simple tests, fixed an existing test.
Task-number: QTBUG-66156
Change-Id: Icfef2e2f5b236e071177c9beffa38d71bf404292
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This ensures that the generated XCode project can correctly find any
files that are referenced via a path containing "..".
Task-number: QTBUG-35131
Change-Id: I049bc2279b4c515a82acd61142d25b8c240e8f6e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Removed duplicate "for the".
Function list was sorted except for sprintf; so sorted it. Also, minor
grammatical improvement.
Task-number: QTBUG-64362
Task-number: QTBUG-64363
Change-Id: Ia47c5195011a0e578e916897b3a5ddb1d78170ad
Reviewed-by: Frederik Schwarzer <schwarzerf@gmail.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is in preparation to adding CBOR support. We don't need yet another
dir for CBOR and placing it in src/corelib/json is just wrong.
Change-Id: I9741f017961b410c910dfffd14ffb9d870340fa6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Make it clearer what the variable actually does by mentioning
that it makes its headers available for inclusion and causes
it to be linked to the binary.
Change-Id: I72821d4bceea7a92e91175ba6c5acc4c3377d7b7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QFileInfo.isRelative() deems any path starting with a slash to be
absolute; on MS-Win, such paths need a drive specifier (unless they're
UNC), so use IoUtils's more robust test for absolute paths.
Change-Id: I7d0872a87833cbf1cc1a6ef107941adc4c529624
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Removed the '!' from two comments because the functions being
documented are static functions declared and defined in the
.cpp file. They are not public.
Change-Id: Ie3b2c32c64102634b6b2a4c438da191536a426d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For Q_OS_WIN, a path is only truly absolute if it includes a drive
letter; merely starting with a slash is not enough. (We can't support
UNC paths, so don't even try: qmake runs various commands in the
source directory using CMD.exe, which doesn't support UNC as PWD.)
This requires, when resolving a path relative to a root, transcribing
the root's drive to such not-quite-absolute paths.
Changed QMakeGlobals, $$absolute_path() and $$relative_path() to now
use IoUtils::resolvePath() rather than delegating to QDir's absolute
path method, since that doesn't correctly recognize the need for a
drive letter (and qmake did run into problems with some paths, from
splitPathList and a failing test, as a result).
Moved existing ioUtils tests for handling of relative / absolute paths
out into separate functions and expanded significantly. Fixed some
existing tests to use an absolute path where one is needed; added two
tests involving driveless (but rooted) paths; and fixed the test init
to set a value for QT_HOST_DATA/src property (the lack of which lead
to an assertion failure with this fix).
Task-number: QTBUG-50839
Change-Id: I2bfc13c1bfbe1ae09997274622ea55cb3de31b43
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
These are no longer part of Qt 5 and produce documentation warnings.
Change-Id: I82242b7b03d7ece1b82e2ff75dc6673f471e2df2
Reviewed-by: Martin Smith <martin.smith@qt.io>
MSVC requires that the C PCH file is compiled (as an object) and linked if
any C file is found, and the same for C++.
Most qmake projects are C++.
If a C++ project has a precompiled header, it is typically of C++ type, and
cannot be compiled as C (for example, it contains or includes classes).
Since there is no easy way to conditionally build the C PCH file only if C
files are found in the project (as done for g++), we need a setting that is
disabled by default.
This amends 30331afda1.
[ChangeLog][Tools][qmake] Introduced precompile_header_c CONFIG option for
MSVC to enable precompiled header for C sources.
Task-number: QTBUG-65103
Change-Id: Id9688a35ee7d9b5e4f5a846b81986cb674bc5f4e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This ensures that the same set of variables can be successfully replaced
in both the Makefile and Xcode generators. It also switches the default
templates to use the Xcode-style ${var} syntax instead of the @var@
syntax for better Info.plist compatibility across generators.
Change-Id: Iff330bafd152773aafac9143c4a34e34f92f0ce6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Since Xcode 6.3, this must be set to NO because stripping on copy is no
longer fully supported due to the potential of input binaries being code
signed. In this case Xcode will simply ignore the strip step and issue
a warning since stripping would invalidate the code signature. This
change silences that annoying warning for release builds. Also, the
setting assignment is moved from being hardcoded in the generator, to
a QMAKE_MAC_XCODE_SETTINGS value.
Change-Id: If25511edddc12b7b0407e2992d80884b7d6437dc
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
This problem does not affect the Xcode generator.
Task-number: QTBUG-65477
Change-Id: I6194edc5b679edad9ae1a25e35b71e5df9bd4c95
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This was missed in 8bebded9.
Task-number: QTBUG-63637
Change-Id: I6be472430a9aa8f533def4fd6c14c8dbfe8b6f70
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The update adds the moduleheader variable to the qdocconf
file for qttestlib.qdocconf and qmake.qdocconf. The problem with
qmake is that it doesn't have a module header file, but it does
have qmake_pch.h, which is used here. This update also corrects
several \fn commands in the qttestlib docs.
Change-Id: I2202b9db96390bac1ee491ca8a99ca9010057ce3
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
In Xcode, the default value for GCC_GENERATE_DEBUGGING_SYMBOLS is YES,
which causes Xcode to emit debug symbol bundles (.dSYM) on macOS and iOS
*if* DEBUG_INFORMATION_FORMAT is also set to dwarf-with-dsym. Since that
setting is already set to an appropriate value with debug vs release
builds, the default Xcode value for GCC_GENERATE_DEBUGGING_SYMBOLS is
already correct and in effect the only thing qmake was doing was always
setting GCC_GENERATE_DEBUGGING_SYMBOLS to a wrong value for release
builds - it should be YES in all cases, to allow the .dSYM bundles to
be generated in release mode, which is in fact the only case where
they're really needed in the first place.
Task-number: QTBUG-41246
Task-number: QTBUG-50896
Change-Id: I07639a3c4ff9f62d591cde3ad66748767d475e3b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This helps alleviate a performance issues where by building iOS based
projects takes a significantly longer amount of time than it should.
Task-number: QTBUG-59136
Change-Id: I77ae12f507725ceb11106b484d73bb7d46e0845c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is C++, not qmake code. Amends 5fa6438633.
Change-Id: Ie5b88c3a06dbe089948488ea3b4b297a08164113
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
SYSTEM is used for system() calls, while SHELL is used in the target
Makefiles.
Task-number: QTBUG-62985
Change-Id: Ia75d3939c59c98699359421166433e8b4a6ee35e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QMAKESPEC is added in makefile generator,
it is not in INCLUDEPATH.
Change-Id: I2451b3c7b30bc237157e68e5ce9de67f55e784b2
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
When the source file is read-only then it would copy the file with that
attribute set when it is installed. However this will cause a problem
if it is installed a second time. Therefore the read-only attribute
needs to be manually reset before installing and again before touching
the file. Once the process is done then it is set back to be read-only
to preserve the state of the original.
Change-Id: I1c01f418ef3c9bd434acd2c2b8ee695544d7bb35
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
All calls to QINSTALL or QINSTALL_PROGRAM were written into Makefiles
with a preceding dash which lets make ignore the command's exit code.
Scripts (and users) calling 'make install' had no way to determine if an
installation completely succeeded, unless they inspected make's output
or the installation tree.
Remove the leading dash from those commands to stop 'make install' on
failure. Users who really want to ignore the exit codes can run 'make -k
install'.
[ChangeLog][qmake] Installation targets do not ignore the exit code of
QINSTALL and QINSTALL_PROGRAM anymore.
Fixes: QTBUG-18870
Change-Id: I7c072c896e6bd2b2ddba4b9c082c5bf627c90f50
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
It was already done correctly in the GCC generators, but lacked in MSVC.
Task-number: QTBUG-11117
Change-Id: I5e6c2e4802dbe33c0f15c46a227a08c3f0cc5707
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the replacement value may well constitute the whole output string - this
is in fact common, given this rather typical usage pattern:
BAR = $$replace(FOO, -flag, -otherflag)
this must be considered when constructing the return value.
compare 3c8134958c.
as of now, this is irrelevant, as QString::replace(QRegExp, QString) will
always memcpy the replacement into a detached copy of the target, but one
never knows.
Change-Id: Ia1f271f45023746040fc28ce6d88a6609e05e5c2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
technically, we should not rely on the i/o classes not storing the
strings beyond the instantiated object's life time.
Change-Id: I0990769b3cf86860184869036c096c531160e9be
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
property values are de-facto guaranteed to be backed by full QStrings,
so there is nothing to be gained from using the raw data optimization,
while doing so risks raw data leaks.
Change-Id: I3d43da9aaadd4d5811c4b1a9d7ac734049da423c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
it's not clear why detaching would be necessary; there is no danger of a
raw data leak here.
concatenating a QStringRef with a non-empty QLatin1String (the only
expected use of this overload) will yield a detached QString anyway, so
this makes little difference in practice.
amends f137957e08.
Change-Id: I521c0e89a8b0c1ae62b1450e81b0ae91a931bcfa
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
no m_tmp is involved any more in this code path; it uses QStringRef.
amends 11d957d043.
Change-Id: Ib272d61edfb150a549c5e6a9a60d53502702e802
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the m_tmp array is a member, so the index toggle for accessing it also
needs to be one - otherwise, odd iteration counts will defeat the
mechanism.
Change-Id: If7a800ed5a4b4168625daf1ebbd5d2d164569d8e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... in $$basename(), $$dirname(), and contains(). the latter case is
marginal, as it only applies to mutuals which are regexes, which i don't
remember ever seeing used.
QRegExp saves a copy of the matched string, so it's necessary to
alternate between two temporaries to avoid detaching. we already
did that in most places.
Change-Id: I97b8294585c17c76d1756f83971f42cb88353af0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
in most cases, the main advantage is not using toQString(m_tmp), which
reduces the possibility of raw data leaks. in cases where we used
toQString() without temporary, this is a slight optimization.
Change-Id: Ib343acffd383aa2c4fefab75fb52762fb534dfc6
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When a ObjC++ QObject subclass is listed in the regular HEADERS, qmake
creates a .cpp file. The moc file will then fail to compile, as it
requries ObjC++ headers. Using Q_FORWARD_DECLARE_OBJC_CLASS() can be
used to let the class be parsed by The compiler, but link will still
fail, as the generated methods (e.g. signals) must be built with ObjC++
compiler, in case they have ObjC parameters:
Q_FORWARD_DECLARE_OBJC_CLASS(NSString);
class MyClass: public QObject {
Q_OBJECT
signals:
void objcSignal(NSString * myObj);
};
The canonical workaround for that is including the .cpp file into the
corresponding .mm file. This also offers a compilation speed advantage,
but is somewhat counter-intuitive.
Therefore, we introduce a separate variable which instructs moc to create
.mm files directly.
Task-number: QTBUG-1581
Change-Id: Ia98af58006efd168ea37f3a63c396979e7e81baa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
A macro name ending in R might expand to a string; if this precedes a
string constant, we're juxtaposing the strings. My first parser for
raw strings would mistake it for a raw string instead, ignoring the
part of the identifier before R. Re-worked the exploration of what
came before the string to catch these cases, too.
The backwards parsing would also allow any messy jumble of [RLUu8]* as
prefix for the string; but in fact R must (if present) be last in the
prefix and *it* can have at most one prefix, [LUu] or u8. Anything
else is an identifier that happens to precede the string. Reworked
the parsing to allow only one prefix and not treat R specially unless
it's immediately (modulo BSNL) before the string's open-quotes.
Add link to the cppreference page about string literals, on which the
grammar now parsed is based.
Added a test for the issue this addresses.
Verified that this fails on 5.6, dev and 5.9 without the fix.
Expanded the existing test to cover R-with-prefix cases.
Task-number: QTBUG-55633
Change-Id: I541486c2ec909cfb42050907c84bee83ead4a2f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The $${TARGET}_manifest.bak file was not removed on "nmake clean".
Task-number: QTBUG-59827
Change-Id: Ia5b636f4917f3e7a2df8d753824b72e63d278005
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QMAKE_LINK_OBJECT_MAX is actually a property of the host, not the
target.
this works around binutil's inability to use thin LTO objects in
conjunction with an MRI script
(https://sourceware.org/bugzilla/show_bug.cgi?id=21702).
Task-number: QTBUG-61335
Change-Id: I90a1334b9c905c433b35546e8f3f3b5089d2c65b
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The strings remember in which file they were created/assigned.
However, this used a non-counting reference to a ProFile, which could
become dangling. If a subsequent ProFile re-used the exact same address,
a string's source would be mis-identified, which would be fatal in
conjunction with discard_from().
Since we actually need only a unique id for comparison, let's use an
integer for that.
Task-number: QTBUG-62434
Started-by: Simon Hausmann <simon.hausmann@qt.io>
Change-Id: I395153afaf7c835d0119690ee7f4b915e6f90d4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
... and use it when building shared libraries and plugins.
It prevents application crashes in cases when libraries and
plugins are unloaded and their strings are still used by
the main application.
Task-number: QTBUG-51602
Change-Id: I4af79183f18c5ed6142d55af02a36fe4334f3fee
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The attempt at loading these functions at runtime with WinRT always
failed, so stop trying.
Change-Id: I658f552684924f8aa2cafffd14cfc5179ac08498
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Task-number: QTBUG-59301
Change-Id: I2562b862465a52ecc56f551bcdb98fa7279ebfcf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>