Since commit 059172c6 precompiled headers did not work anymore on
macOS, because the ${QMAKE_PCH_ARCH} string was suddenly appearing in
locations where it was not replaced with the actual architecture, e.g.
the directory where the PCH files are written.
Fix this by replacing the whole file path and not just portions of it.
Fixes: QTBUG-79694
Change-Id: I925d4ee8980a0de3205a0e387a516a5c6f8cfa4b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
When building an application for Android on Windows it is possible that
the command line will be too long when doing the link step. So the code
for generating a response file is moved to MakefileGenerator so it can
be used by the other generators easily. The same variables used by
MinGW can be used elsewhere then.
Fixes: QTBUG-71940
Change-Id: I6c331d12e9541a90a4a95e0154d0ea1c056489bc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Precompiled headers were put in a directory which had exactly the same
name as the binary to be generated. This resulted in a failure with any
mkspec that used clang_pch_style. The g++-mkspec avoid this problem by
extending the directory name. This change adopts this technique for
clang mkspecs.
[ChangeLog][qmake] Fixed precompiled headers for the Clang compiler.
Fixes: QTBUG-72404
Change-Id: I471462e2bcb1e33f19d277c21acde0c04b1ffcd6
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
The group parameter is only used when cross-compiling, mark it as unused
otherwise. This is noticeable in the cmake branch because there we build
qmake with cmake and apply the same warning flags, as opposed to the
bootstrapped qmake build when using ... qmake.
The cache file parameter in qmake is unused and the
mustEnsureWritability is only used on Windows.
Change-Id: I08655d5150f5a967c2340ee7678bad3a4d69914f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We must check whether outputs or inputVars are non-empty before
accessing them.
This amends commit 68866b1a.
Task-number: QTBUG-79178
Change-Id: Iecf6dc705bac9bef5133ae2e5ceeace5f859f175
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When qmake is run with -prl we don't need to write the glue makefile,
and doing so will end up with MakefileGenerator::writeProjectMakefile
trying to write to an invalid Option::output, resulting in warnings:
QIODevice::write device not open
Change-Id: I196b185570e7329c621c2ccb8530b43f4be51ee6
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
[ChangeLog][qmake] The syntax 'LIBS += -frameworkFoo', or
'LIBS += "-framework Foo"' is no longer supported. Use the
canonical 'LIBS += -framework Foo' instead.
Change-Id: I50fd02dbfa155a0b95859734486a92bd448e87c2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
People tend to "turn off debug and release builds" by just not building
one of the variants. For example, Qt's own rcc is built in release only,
however it is configured for debug_and_release with the same TARGET for
both.
Let qmake complain about conflicting TARGETs only we're about to build
all of those conflicting targets, i.e. if build_all is set.
Change-Id: I0448bf5cb421e2d801d3cc30e0d80353fba0d999
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Do not resolve -l entries to absolute file paths for libraries in the
default search paths.
This restores behavior from 5.12.0 (commit 2327944d) for Windows
system libraries.
Fixes: QTBUG-78827
Change-Id: Ic2d4626df87308dd635afc1ab5c4b8191d3d2831
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The root of the framework bundle shouldn't contain random files,
and doing so will prevent the bundle from being signable.
We still look up prl files in the root, to keep backwards
compatibility.
Change-Id: Ifd0bc3c6e7924e89eec54d3ef9368dfc95ed402c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Commit 80dea664 broke .ui files with global includes that are not part
of the project, because we blindly added every file path that falls
out of 'uic -d' as dependency.
Introduce the extra compiler CONFIG flag dep_existing_only to bring
back the old behavior that ignores non-existent dependencies and set
it for uic.
Change-Id: I6eaa82817c932a98ebac6d08115a9815d4b9dd21
Fixes: QTBUG-78144
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
For nmake and VS projects we added the NDEBUG define for the release
configuration unconditionally within the qmake generators. To undefine
it, users had to use a nasty work-around.
Now, define NDEBUG within the MSVC mkspecs. In order to do that we
introduce the DEFINES_RELEASE and DEFINES_DEBUG variables that are
merged into DEFINES in default_pre.prf.
Users can unset NDEBUG by writing
DEFINES -= NDEBUG
in their .pro file.
Note that DEFINES_RELEASE and DEFINES_DEBUG are merged in
default_pre.prf in order to give extra compilers (like moc) the chance
to see the fully resolved DEFINES variable. This is different from the
QMAKE_CFLAGS_(DEBUG|RELEASE) variables that get merged in default_post.prf.
Fixes: QTBUG-78071
Change-Id: I381770a1d2f974fbae9b09a2254e3f2fc7842b68
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Having hard-coded absolute paths in the xcode project breaks switching
between iOS and simulator builds.
Fixes: QTBUG-77804
Change-Id: Ib655bfc774b92c413a7b94ba4d005b6e1c4d2905
(cherry picked from commit 97465b1540)
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In xcode projects we replace the _debug part of referenced libraries with the
variable $(QT_LIBRARY_SUFFIX). This only worked for libraries passed with -l.
Make the library suffix replacement work for libraries passed as absolute paths
too.
Fixes: QTBUG-77804
Change-Id: Iac2dbd2f67c3fa0f415ac43cbab5a906657164e5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The c'tor that takes a QString detects whether the string's first and
*last but one* characters are double quotes. In that case it removes
the first and *last* characters, resulting in a conversion from
"\"C:\\foo\"\\" to "C:\\foo\"". It's highly unlikely that this code path
was ever triggered, because its erroneous result would have been
noticed. Remove it.
Change-Id: I653e6a4667ae3620c35e509420eb22a71bb986a9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This was introduced by accident in 4da47d0f.
Fixes: QTBUG-77429
Change-Id: Ic3d9052e1fc83dab5ed3b8725629588208b0d7bb
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
(cherry picked from commit 2a4cf923f4)
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Having hard-coded absolute paths in the xcode project breaks switching
between iOS and simulator builds.
Fixes: QTBUG-77804
Change-Id: Ib655bfc774b92c413a7b94ba4d005b6e1c4d2905
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The description of the project mode looked like this:
-project Put qmake into project file generation mode
In this mode qmake interprets files as files to
be built,
defaults to *; *; *; *.ts; *.xlf; *.qrc
The list of wildcards is incomplete. Unfortunately the file extensions
are defined in QMAKE_EXT_* variables in mkspecs, and the help display
code has no access to that data. This went unnoticed for quite some
time, and fixing this is too involved considering the gain.
Replace the text above with the static text below:
-project Put qmake into project file generation mode
In this mode qmake interprets [files] as files to
be added to the .pro file. By default, all files with
known source extensions are added.
Change-Id: I815a50957c05dccc45e1cd6657f568599d1911f6
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The conditions were wrong, they must compare against zero.
Also, use qstricmp to avoid the platform #ifdef.
Change-Id: I7e5ef1b9ae8e2e1d3d9ce90a645ee568b370ab57
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The commands are separated by "if errorlevel 1 goto VCEnd" lines to
make sure we abort on the first failure. However, we also insert magic
comments starting with "Rem" for IncrediBuild. These do not need
error checking. Also, the last command does not need error checking.
The XML line ending entities are also unneeded. By using proper line
endings we ensure that commands appear on separate lines in Visual
Studio's property editor.
Change-Id: Ifbf7525281e892c820034fafc64b555fff3dc756
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
The VS project generator never calls the Win32MakefileGenerator code
that sets up DEST_TARGET which is used for checking for conflicting
DESTDIR/TARGET combinations on Windows. Replicate the setup in
VcprojGenerator::initProject().
This amends commit e75aed1a.
Change-Id: I4238eb2f57615095c372cee9ada9fc961cc36133
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Sub-projects in VS solutions must have unique project names. If there
are multiple projects with the same TARGET then QMAKE_PROJECT_NAME must
be set to different values.
The .sln generation code did not use QMAKE_PROJECT_NAME and produced
.sln files with equally named sub-projects.
Replace the 'orig_target' member of VcsolutionDepend with a
'projectName' member and use it when writing the .sln file and for the
misnamed "GUID map" that's supposed to have unique keys.
This commit amends 9e750d34 (qt/qt.git).
Fixes: QTBUG-77639
Change-Id: I81c64f8bc6baeb6d99e9d5808fb73dfd7aaaeeb8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Since its introduction in commit
65bb1a25419210e6097cad973fb847aa3719c09b (old internal history, 2005)
with the commit message "optimizations I've been sitting on here"
we're dragging along this dead code. It is time for removal.
Change-Id: Ic7902ebb8c402734974ad6651a1371d1e5bf93c5
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This was introduced by accident in 4da47d0f.
Fixes: QTBUG-77429
Change-Id: Ic3d9052e1fc83dab5ed3b8725629588208b0d7bb
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Windows resource files support a subset of C preprocessor directives.
Among others they can have #include directives.
Use QMake's own scanner to retrieve the files that are included by a
Windows resource file and add them to its dependencies.
For the test case the TestCompiler class had to be extended:
runCommand is now public, and commandOutput is less peculiar.
Fixes: QTBUG-3859
Change-Id: I138703352c37c98297c0574a9a440510c1c494b8
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Having those characters in QMAKE_EXTRA_COMPILERS broke the generated
VS project file. They must be replaced by XML entities.
Fixes: QTBUG-1935
Change-Id: Iff1edbeabec4cedef777071682412970b7769f19
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
QMakeLocalFileName is not suitable for QList. Use QVector instead.
Change-Id: I5a3c4c8da14c0a920b5a57cba148ad68ac0f85a2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If a project has DESTDIR and TARGET set to fixed values, then the
target paths conflict when doing debug_and_release builds.
With this change we're detecting this situation and yield a warning.
Fixes: QTBUG-2736
Change-Id: Ib163db3463322792ab9fa5b997285ac9fc9819ab
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Libtool cannot cope with absolute paths in the dependency_libs entry.
We split absolute paths into -L and -l here.
Change-Id: I30bf11e490d1993d2a4d88c114e07bbae12def6d
Fixes: QTBUG-76625
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
In MakefileGenerator::initOutPaths() we ensure that directory
variables end with a directory separator, except for DLLDESTDIR.
There doesn't seem to be a valid reason for this exception.
Remove it for the sake of simplifying the code base.
Change-Id: I60eb01b410161e6e1d147d76f044f5140a7573bd
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This undocumented option was introduced in
69c22301806b56d56cbe5f5076b889ba98e41a2b (old internal history, 2006) to
prepare some unspecified change to configure that was never done.
Change-Id: I60de731ac9bc6f6424c57574e59e9f6b4f6c5eb3
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Re-generation of the Makefile depends on a correctly set up
QMAKE_INTERNAL_INCLUDED_FILES variable. In debug_and_release builds
this variable is set up for Makefile.Debug and Makefile.Release, but
not for the meta Makefile. However, that's where the Makefile
re-generation target is located.
We now collect the contents of QMAKE_INTERNAL_INCLUDED_FILES for
Makefile.Debug/Release and use that for the meta Makefile.
Fixes: QTBUG-13334
Change-Id: I6124a91447d5c54d51680e23570c4e97f44e6a73
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
...because
- it calls the properly camel-cased member function buildArgs(bool),
which is slightly confusing
- it returns buildArgs(true) plus input and output
We also let it return only the arguments, excluding the qmake
executable. This is consistent with the function's name and saves us a
string replacement stunt at one call site.
Change-Id: I8bea65900bd51962962e4cfd425ffbc26e3a52fe
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove usage of the 'if (0 && ...)' pattern that was presumably used
to temporarily disable code paths. The disabling of the two code paths
was introduced in 356a677b386648710efc4db9a8a1b4a975f95c48 (old
internal history, 2004) and
0326e3511928d90329152b9b0493da76e9caa442 (old internal history, 2006).
It can be deduced that it's pretty safe to remove both.
Change-Id: I88aee65b1286701241b5b80fbac0c65cd99ecd5e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Without treating -force_load as an option with an argument, we end up
leaving stray -force_loads in the linker line, resulting in build
failures when the following option is a random library then treated
as a file path.
Task-number: QTBUG-66091
Change-Id: I352c50ab67e32ef6b2b5c6a4f90455b20034e207
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The linker doesn't support -framworkFoo, so neither should we. The correct
syntax is -framework Foo.
Change-Id: I3f39ffc067871ce058542bf0068274b35f7b51f6
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
This change allows using custom flags for ar. For instance, it is
now possible to create a thin archive by setting QMAKE_LIB += -T.
This uses and extends commit d92c25b1b4
which served a similar purpose for the linker.
Change-Id: Ie1d6a0b957dc4809957726de00911c8d91647fab
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
It conflicts with 'requires' keyword.
Fixes: QTBUG-77093
Change-Id: I85e8f530dd1e2bf9a31906dd6c5123b947235b01
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The absolute paths of certain static dependencies can have spaces in
them. The _qt5_$${CMAKE_MODULE_NAME}_process_prl_file fails to handle
this, and simply replaces all spaces with semicolons, which obviously
breaks the list of dependencies, and a consuming application fails to
link with a message like:
LINK : fatal error LNK1181: cannot open input file 'C:\Program.obj'
This change partially restores the functionality that was added in
102e1822ff specifically the part
that changes qmake to export an additional variable
QMAKE_PRL_LIBS_FOR_CMAKE. This variable has the same content as
QMAKE_PRL_LIBS except it uses a semicolon as a separator, so that
CMake can correctly parse the separate lib entries.
This is much cleaner than trying to parse the original QMAKE_PRL_LIBS
variable with a complicated regular expression.
Amends eda28621f6.
Task-number: QTBUG-38913
Change-Id: I1d18fb779606505bc92320d8ce13232c7022e212
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Since commit 20e9422e we don't ignore exit codes when installing files
anymore. This patch does the same for meta file installation. We
really should be notified properly if something goes wrong here.
Task-number: QTBUG-18870
Change-Id: Ib6a20293380f400379b10ec767bf38dc74d5beeb
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
A recurring problem with the Q_NAMESPACE macro is that it declares
an object (staticMetaObject) in the surrounding namespace. That
object lacks any export/import qualification to make it usable
with shared libraries.
Introduce therefore another macro to work around this issue, allowing
the user to prefix the object with an exporting macro, f.i. like this:
Q_NAMESPACE_EXPORT(Q_CORE_EXPORT)
The old macro can simply then be rewritten in terms of this new one,
supplying an empty export macro.
Note that NOT passing an argument to a macro expecting one is well
defined behavior in C99 -- the macro will expand an empty token.
Of course, MSVC doesn't like this and emits warnings. As a
workaround, use a variadic macro.
[ChangeLog][QtCore] Added the new Q_NAMESPACE_EXPORT macro. It
can be used just like Q_NAMESPACE to add meta-object information
to a namespace; however it also supports exporting of such
information from shared libraries.
[ChangeLog][Potentially Source-Incompatible Changes] Prefixing
Q_NAMESPACE with an export macro may no longer work. Use the new
Q_NAMESPACE_EXPORT macro for that use case.
Fixes: QTBUG-68014
Change-Id: Ib044a555ace1f77ae8e0244d824ec473550f3d8e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
'make clean' removed the import libs for DLLs which makes them quite
unusable. Move the import lib removal to the 'distclean' target.
Fixes: QTBUG-51977
Change-Id: I727d520435f88a83a7fb14cb0ad81f8fe7c6d61b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The qmake code to read output from dependency-generation was adding
QByteArray values to a QString, thereby tacitly converting from UTF-8;
this is misguided. Hopefully, the command emits its output in the same
local 8-bit encoding that QString knows to convert from.
Simplified needlessly verbose loops (that violated Qt coding style) in
the process.
Fixes: QTBUG-75904
Change-Id: I27cf81ffcb63ebc999b8e4fc57abdb9a68c4d2b3
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Fix clang warnings that are disabled in the default build.
Change-Id: I4e773a24884db94acdc6c295d3f66da07cd8a5bd
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Those modules are TEMPLATE=aux, so they weren't triggering the file creation
here.
To make this work properly we have to:
- check for TEMPLATE aux in the right places
- add a dummy target to INSTALLS to actually trigger the creation
- initialize PRL_TARGET for aux templates
Fixes: QTBUG-75901
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Idce141629dd34287808bfffd159f92ac28c6c8b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Especially for header modules we don't want a 'Libs:' entry in their
.pc file.
Task-number: QTBUG-75901
Change-Id: I39037d3132e39dd360532e1425f794ebec28e0bd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMake code like
rplc.match =
QMAKE_PRL_INSTALL_REPLACE += rplc
led to the generation of invalid sed calls in the Makefile.
It is already actively checked for empty matches, but if *all* matches
are empty, the sed call looks like
sed foo > bar
which is invalid.
Task-number: QTBUG-75901
Change-Id: I173ed99826414dcf06253a15a247f7d067ee3977
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the whole value of 'name', not just the first element, and also
replace variables like ${QMAKE_FILE_IN}.
This fixes the file_copies feature (COPIES) for Visual Studio
projects, because for every entry in COPIES an extra compiler is
created with a name 'COPY ${QMAKE_FILE_IN}'. Before this patch the
name and the generated file filter would be just 'COPY'. However,
duplicate filters are being skipped by the VS project generator. All
but the first COPIES entry was ignored.
Fixes: QTBUG-76010
Change-Id: Icaa5d2cb8d88ae3ef8ce86220198bca1b9e673f5
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Invalid SUBDIRS values like
SUBDIRS += foo \
bar \ \
baz
would produce a Makefile with a sub-- target that will call the make
on the same Makefile again recursively, letting make run forever.
Ignore values like this and print a warning message.
Fixes: QTBUG-76068
Change-Id: I6ca0f8c8238249f1be02d8c311b4c148fd80e707
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
qmake automatically appends a dir_sep to a few directory paths (see
MakefileGenerator::initOutPaths), and various .pri and .prf files rely on
that. Anyhow, for non-MSys MinGW on Windows this creates a problem,
because mingw32-make will interpret the backslash in
OBJECTS_DIR = some_path\
to escape the following newline. We have been working around this
problem in various ways:
- winmakefile.cpp just removes the trailing \ for OBJECTS_DIR, at the
cost of not being compatible with logic in .prf/.pri files that rely on
the separator.
- winmakefile.cpp adds a '#avoid trailing-slash linebreak' comment for
DESTDIR. Anyhow, this does not seem to work for mingw32-make: If you
reference $(DESTDIR), the variable will contain trailing spaces.
- unixmakefile2.cpp duplicates a trailing \ for DESTDIR.
The last approach is now taken also for OBJECTS_DIR.
Task-number: QTBUG-75257
Change-Id: Ie8171a990a9ce1cfbf1b94037252ef2392313338
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Conflicts:
src/corelib/tools/qlocale_data_p.h
(Regenerated by running the scripts in util/local_database/)
src/gui/opengl/qopengltextureuploader.cpp
Done-With: Edward Welbourne <edward.welbourne@qt.io>
Done-With: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change-Id: I12df7f066ed0a25eb109f61c4b8d8dea63b683e2
Information about header files is cached by qmake. The key is the
filename of the #include directive. For system includes (<stdio.h>) this
is unique, according to the search order in INCLUDE_PATH.
For local includes, given as "foo.h", there may be name collisions. Usually a
compiler first searches in the directory of the current file (stored in the
sourceDir variable), and only in case of a miss the INCLUDE_PATH is
considered.
The dependency generation now distinguishes local header files by their full
relative path. This is implemented by forcing the use of the full relative
path as key into the SourceFiles data structure if the flag try_local is set.
Change-Id: Ifd75325b53496824054595f7fc98d71bbd9d8aa6
Fixes: QTBUG-72383
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This fixes the "could not parse compiler option" warning when
generating VS project files.
Fixes: QTBUG-75275
Change-Id: Idd98ae5fdb8ebf5a4e311cbb6cd3ed1daba74ca4
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Clang-cl couldn't find the header given to it by -FI when it isn't in
any of the included directories.
Additionally clang-cl 8 has a bug with exported templated classes with
inline methods that causes it to have missing symbols at link time. We
work around this.
Fixes: QTBUG-74563
Change-Id: I7becf05fa8edb07bd4cefe12bee3737e5e1dfa14
Reviewed-by: Yuhang Zhao <2546789017@qq.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The comment hints that it's fixing an issue in Visual Studio 2013, which
we don't support anymore.
In all supported Visual Studio Versions -Gm is actually deprecated
anyhow, and not set anymore by default. So I guess it's safe
to remove the special handling here.
Change-Id: I2e8ff85350ba651d9a763aabba7b6494ba88d82e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
For applications that set VERSION the installation targets of pdb
files were wrong in qmake's nmake Makefile generator.
Replace code that tries to reconstruct that target's versioned
extension with TARGET_EXT which already contains the fully resolved
target extension.
Fixes: QTBUG-74265
Change-Id: I9553a5f70170e077a59c866079ae51647ae80bef
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Commit 2327944d added the QMAKE_DEFAULT_LIBDIRS to the library search
paths without taking care that explicit library search paths should be
inserted before system search paths.
Copy the behavior of the UnixMakefileGenerator, esp. of commits
5bc9541e and e185f343.
Fixes: QTBUG-73959
Change-Id: I7e951f432bb5f71ce4bcdb18b7102b4380441181
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
