Several of the unit tests request that the peer emit more than one
signal, but only handle one. The rest of the signals stay queued in the
socket and will be delivered at the next test, causing it to fail often.
This doesn't happen in the tests with the bus. There, we don't receive
the extraneous signals due to AddMatch/ReceiveMatch on each signal
individually and the synchronous nature of the emission (the signals
have already been emitted by the next AddMatch and cannot match it).
Task-number: QTBUG-42145
Change-Id: I743a0553074972042fca46b76db5d9e7b3209620
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This is a very rare occurrence: if the user is the owner of the
directory, the user can chmod(2), and we already checked that the user
is the owner. However, chmod(2) can still fail on read-only fs and on
hardened systems.
Task-number: QTBUG-41735
Change-Id: I8f8bac763bf5a6e575ed59dac55bd265e5b66271
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Since the current user is the owner of the dir, we'll get 0x7700 as
permissions, not just 0x700. With the wrong check, we were always doing
an unnecessary chmod.
Task-number: QTBUG-41735
Change-Id: Ib1fc258fef4bf526baa9c71201f9b78d36f5454f
Reviewed-by: David Faure <david.faure@kdab.com>
Use qint64 wherever possible. The linear buffer is never requested to
allocate that much memory (always limited), but at least we ensure we're
not dropping bits where we shouldn't.
Windows's POSIX compatibility layer is never largefile enabled, so it is
always necessary to chunk large reads and writes. On Unix, this will
be rare, unless someone passed -no-largefile to configure, for some
weird reason.
Unfortunately, this is not testable, unless we can allocate a buffer
with 4 GB or more in size. The test for this would be to open a file we
know to be small, then try to read 4 GB + 1 byte. If everything works
correctly, we'll read the full file; if there was a truncation, we'd
read one byte.
Change-Id: If3ee511bf1de17e0123c85bbcaa463b9972746ce
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unlike qtouchevents, this provides a touch area which logs its
events and devices.
Task-number: QTBUG-40461
Change-Id: Iaaa3589dd692caf8c7078f5ed2ff1e8b2322a369
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
CE_ComboBoxLabel was relying on a font color / painter pen set
by CC_ComboBox. This change ensures that CE_ComboBoxLabel has
correct color when CC_ComboBox and CE_ComboBoxLabel are drawn
independently.
Change-Id: Id548d831fdde5885bc7c157d55de6235ef3f0a56
Task-number: QTBUG-41702
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Some CFStringRefs created with CFStringCreate* methods were not being
released. Using the QCFString helper class to perform auto release.
Change-Id: I36d15c0d35118524089e99ea3cd53c41342d6308
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
CFRelease should be called IFF PMPrinterCopyDescriptionURL succeeds
Change-Id: Id289aea3a4e3da397dae4062319256a043538597
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Since commmit 0127962e47 the
PBXResourcesBuildPhase is used only for ICONS, because the old
behavior of using it when target path is not given differed from
the documentation and behavior of the makefile generator by using
Contents/Resources as target directory when targeting osx.
The PBXResouceBuildPhase optimizes png, compiles xib or asset catalogs
and copies the rest.
The advantage is that it makes it easy to add resources to the bundle,
the only problem is that the target directory is always the resource
directory.
The copy operation currently used does not compile resources, which
makes adding .xib (for the Launch File required to support iphone 6)
and asset catalogs difficult.
So we restore the old 5.3 behavior for ios, and use the build
resources phase when possible on osx (target Contents/Resources).
On osx this still implies a difference between the makefile
generator and the xcode generator: only the latter compiles resources.
Change-Id: Id1853693e88fc46562b044efdea2bf5f9da2c98c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Found by coverity. The cachedIcon can be deleted
when being inserted into the icon cache (in QCache::insert).
So copy it to icon before trying to insert it into the cache.
Change-Id: I5ed13c0c7ecb8f8f13285ca5d06237493dbea479
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Not wayland. Use the default of eglfs coming from linux_device_pre.conf.
Qt 5.4 includes QtWayland and the platform plugin from there may get built
unexpectedly. The result is that the Pi setup that worked with 5.3 and eglfs
stops functioning.
Task-number: QTBUG-40538
Change-Id: If894c7ddd7b40a22272797d94ce1a545b7ab43f2
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
Fixes errors like
qsslsocket_openssl_symbols.cpp:111:6: error:
unused function 'qsslSocketUnresolvedSymbolWarning'
[-Werror,-Wunused-function]
void qsslSocketUnresolvedSymbolWarning(const char *functionName)
^
1 error generated.
Change-Id: I164518de583f080724ab9a7165c885602a1c6231
Reviewed-by: Richard J. Moore <rich@kde.org>
Some offsets differ between QWidgets and Controls. Therefore, we need
drawNSViewInRect() to know about the origin of the call.
Change-Id: I3bd165f94731f2b37423d86ed5d3c302a17d5ef5
Task-number: QTBUG-42067
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
This is needed since the names of the header are the ones you have to use in the QML signal handlers to access the variables
Change-Id: I507e2ccc05a1fd2c5efd0bf4bef92ed33a186d95
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Currently DataLocation returns the same value as DocumentsLocation which
doesn't fit the purpose for what should go in this directory. This patch
aims to correct that. On a side note, it will also be more inline with
OS X current behavior
[ChangeLog][QtCore][iOS] Fixed path to QStandardPaths::DataLocation.
Until now DataLocation was pointing to the Document directory. With this
patch, it will return the more accurate Library/Application Support.
Application making use of DataLocation should move these data to the new
location. This can be done using the path provided by DocumentLocation as
source path.
Task-number: QTBUG-42276
Change-Id: I35415643cf8cc7a60528f9b0fb5028ada5deace0
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: David Faure <david.faure@kdab.com>
When QWindow::alert() is called with a duration of 0, it calls
QPlatformWindow::setAlertState(true), and expects the alert state to be
reset when the window is next activated. Other calls to alert are
ignored while alertState is still true.
If alert was called for an active window, it would remain in the alert
state until deactivated and activated again, and on some platforms calls
to alert would be broken while deactivated.
Alerting doesn't make sense for active windows, so we can simply ignore
it, which was the behavior with Qt 4 on some platforms.
Change-Id: Ia3324da4c89db711b63eb31cddf0bf742bb4e3b8
Found-By: Jan Noertemann <jan.noertemann@uni-dortmund.de>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Martin Gräßlin <mgraesslin@kde.org>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Forward the flag to QWindow by setting the _q_macAlwaysShowToolWindowproperty
on the window in QWidgetPrivate::create_sys(). Test
for the property when creating the window.
Task-number: QTBUG-29816
Done-with: Morten Sørvig
Change-Id: Id810dda98d02deb0902192cce1783d8b16b04d04
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The text should be empty when Cmd key is in modifiers.
Task-number: QTBUG-36281
Change-Id: Ic71e532695ad4a947c86e8d21ae864d70f9afa4c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Currently getting QXcbScreen* for primary screen is too messy and it
wrongly uses QXcbConnection::primaryScreen() as an index in
QXcbConnection::screens() although QXcbConnection::screens() returns
the primary screen as the first item in the list since
3c8eb40487.
So to clear the API rename primaryScreen() to primaryScreenNumber(),
add QXcbConnection::primaryScreen() that returns correct QXcbScreen*
and use it directly.
Change-Id: Icb7391aa3e82b32ca48f2bda764dcf7ffd89cc47
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
This disables animations for windows that are
completely obscured by other windows.
On examples/quick/animation, obscured CPU usage goes
from 10% to 1%. There has been reports of 100% CPU
usage with Qt before this patch.
Change-Id: Iefea43ed8c1cfaa2df13f1f5a4e4450146ade522
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
greatly improving the performance of qobject_cast<QWindow *>
Change-Id: If5a1afa6e41f4676f4838ea3ff80f1d89e396dfc
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
when a module delegates to another module (as the activeqt ones do), it
doesn't have a master header to be included. we could derive the real
master header by doing a transitive dependency resolution and some
filtering, but that seems unnecessarily complex.
Task-number: QTBUG-41892
Change-Id: Ie7ce51a837ac06e929b204ec734206c11b3ae241
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Windows CE does not have all _BitScanReverse
intrinsics, so disable those for Q_OS_WINCE.
Change-Id: I34a3c02c6ffdfff2a209b2c9c1b80bef4566ee39
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Calling scroll during painting fails in cases where the scroll is
attempted accelerated. This is easily fixed by not using accelerated
scrolling during painting.
Task-number: QTBUG-41615
Change-Id: I38d2428d5679c242f13d53793a3dc3b8e01b538f
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
If we detect a utf8 BOM mark at the beginning of the .ini
file, skip the marker and set the iniCodec to utf8.
Task-number: QTBUG-23381
Change-Id: I1b37fc4f1638a48e4f3ee71ab165e2989bc592f1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Send a _NET_WM_STATE client message to the root window
instead of changing the window property.
Task-number: QTBUG-41310
Change-Id: I864af0158ec55796bb3cbc123469709b2be54ec8
Reviewed-by: Martin Gräßlin <mgraesslin@kde.org>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
If requestedServerName is a full path e.g. "/tmp/some/long/path" the
temp path will end up "/tmp/some/long/path.balblabla/tmp/some/long/path"
and it might fail because it doesn't fit in addr.sun_path.
Change-Id: I6a138fd92be9e0b3b432ab9ac977d04cb330f3fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
QTextLine::glyphRuns was not handling justification when splitting
glyphRuns due to multiple font-engines. This patch adds the missing
justification.
Task-number: QTBUG-41901
Change-Id: I02d24218630506da21531a6499784dff2eecdf6f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
These should be at least Defined by the system even with wifi power off
Change-Id: I0964ba82fe3fab98585ea7771687cef4d1b70cf9
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Change-Id: Ib410584ba2c1fe342efb18eb955273090d36db8f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
We do not need to emit a diagnostic at definition time.
The diagnostic will be emit at expansion time.
Fix error when parsing boost header:
/usr/include/boost/fusion/container/vector/vector.hpp:25: Error: '#' is not followed by a macro parameter
Task-number: QTBUG-42233
Change-Id: I27deab362341f17ca3b0160615bb1b0934c3d5c3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
-Application Example
-Analog Clock
-Analog Clock Window
-Scribble
-Digital Clock
-Thumbnail images were created with an obscure window manager and
they look out of place in the Welcome Mode in Qt Creator.
-Used Windows 7 as the platform.
-Images within the documentation not updated because they are still
relevant.
Task-number: QTBUG-33597
Change-Id: I255fc4960e9adcec273f21287ef2182656c6b007
Reviewed-by: Venugopal Shivashankar <venugopal.shivashankar@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
The temp socket is in a safe place. There is no need to set any
permissions at this point.
Change-Id: I18ea4b71b7c20db65dc46c57ddc5d34d8b93f577
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Mode is always != 0 at this point (QLocalServer::WorldAccessOption is
a combination of the bits tested later).
Change-Id: I5abfb4e49fdc7903e21398525af05989f40d7f94
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Change-Id: I269b1b5ab802c391a12bcdc8cfe0c4d3e52f9cba
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
