Like in Qt code itself we should use forward slashes consistently.
This enables the vulkan test to run on Linux for MinGW
cross-compilation.
Task-number: QTBUG-76660
Change-Id: Ifc6dec11bac3c3769d5d06e49da529f66f7b5843
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Otherwise, the math will fail badly. Documentation improved to reflect
reality.
Change-Id: I9e3d261ad9bf41cfb2b6fffd159085cd38e3c388
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The make executable that comes with Android's NDK tries to execute the
shell-builtin "move" as a stand-alone executable unless you trick it
to execute "move" through the shell by surrounding one argument with
double quotes or such.
Force the execution of "move" through shell by altering QMAKE_MOVE for
Android on Windows.
Change-Id: I5b1490ad0606960dbd06a4cafb0b0b983e265159
Fixes: QTBUG-35713
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Although QPlatformInputContext::reset() documentation says that reset()
should not send any QInputMethodEvents, implementations on Windows,
macOS and iOS do send a QInputMethodEvent which clears preedit text in
their reimplementations of reset(). Text editing controls depend on that
and may not clear preedit text if such event is not sent.
Change-Id: I75ab73946cb06e93e5fc5e98e0cc503a7de5c2e0
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
There is no need to tell the editor to stop composing if user taps so
close to the cursor position that the cursor will not move anyway. If we
do stop composing in such case, then since there will be no cursor
position change notification, we will never start composing again
(before the cursor is actually moved), and the current composing region
will remain being displayed as normal text instead of being displayed as
composing text.
Change-Id: I4ebe6442e1ba8c365d6754c1a8487235d177c732
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Fixes auto-capitalization in AnySoftKeyboard. It was typing the whole
first word in a sentence in upper case.
Change-Id: I605a1aee39d432a3474c0bf706445d354562285f
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
7a7c722782 caused a regresssion in some
cases.
Change-Id: I1089a79534d811b195de663ff664d9ba5a6ac6c5
Fixes: QTBUG-74110
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
On Windows buildToolsVersion 29.0.0 have problems, therefore,
it's better to use a version that we know it works on all platofrms.
Change-Id: I25cdea4b8101bfe5f022025fcd7cc4cbf358fa03
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This fixes the usability issue of a modal dialog showing up behind a
splash screen, not visible to the user, but blocking user input and the
application startup sequence until discarded.
[ChangeLog][QtWidgets][QSlashScreen] On macOS, lower the splash screen
when a modal dialog is shown to make sure the user sees the dialog.
Change-Id: Ibae768f76909d930cb25dcf5cee31edc5f15c29a
Fixes: QTBUG-49576
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Don't go through the doScaledRead path (i.e. calling read_image_scaled)
when reading an image that the target size is the image of the file we
are opening.
This makes the loading of the file much faster while keeping the output
correct.
[ChangeLog][QtGui][QImage] Improve loading time when loading png files
that have the same size as the target.
Change-Id: I2a33c49fe1ce52ec296c2175ee542b5bcdec2c4b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When using a http proxy (and presumably other proxies) we might have
failed/aborted (aka "finished") the request and _then_ receive a
"proxy authentication required" message from the proxy. In this case
there is no spdy/http2 reply in the queue, so asserting is wrong.
Change-Id: Id9b76b580299f6a6cd6efad62d6aaf63183816fb
Fixes: QTBUG-76426
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
In some scenarios with QNAM we call socket->close, leading to a flush,
leading to an error, leading to another error emission... To work
around this scenario we stop trying to close the socket if the network
channel is already closing.
Change-Id: Id15504f476484ce61f11ba83a5755ceb5f581f9b
Fixes: QTBUG-76567
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Inspired by:
https://codereview.appspot.com/6812076/
Resizing a window larger results in the newly exposed region being invalidated
but the old region is treated as valid.
This can result in the old region no longer updating.
Was added to D3D9.
Improving a fix from Filippo Cucchetto:
https://codereview.qt-project.org/c/qt/qtbase/+/195336
and pushing to D3D11.
ifndef protects against compilation error for WinRT.
Invalidate() should be used only for desktop apps.
Task-number: QTBUG-46074
Change-Id: Ie24b8dffe130b970f2362337ac4f9bee666f82b2
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The directory must be prepended by = to denote the sysroot.
This amends commit 797f686e.
Change-Id: Ib85c0abc58fce3504ecccef0e223b2618ac9149a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
We must use the same two-level replacements like for .prl files.
This amends commit d5071a40.
Change-Id: Iea065d01dee61cf2d1ff78640d045c3c76db9ac8
Fixes: QTBUG-76625
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Converts from OpenGL formats to Vulkan formats.
There are commented out lines for the formats in QOpenGLTexture::TextureFormat
for which it was hard to find an unambiguous mapping to vkFormat.
Task-number: QTBUG-75108
Change-Id: I06a7fd8df7d98cef314410ffd79ca9cff6599357
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
(cherry picked from commit b21b07877a)
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
See comment in qnumeric_p.h:convertDoubleTo for details.
Change-Id: Ifcd13f7f67995af6a60e50ccabe843a855be04ae
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Calls like
QHighDpi::fromNativePixels(point, window)
would return device independent coordinates outside any
screen in cases where the window is spanning multiple
screens and the native point was not on the main screen.
Correct this by looking up the correct screen and use
its scale factor and origin when scaling coordinates.
Task-number: QTBUG-73231
Change-Id: I01a3a42f42121b8d9f4ced2bb0fb023d6ae6bfe7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Using QImage allows creating the style before the application has
been created, and is the more modern API.
No changes to the documentation needed.
Change-Id: Ifa0e5fa1113802fca18fbd45bb3c0a5ba1dbfeab
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Fix most clang warnings about override, nullptr, range-based for loops.
Change-Id: Id47e57adb63a38e2f397a31511b788a2432c97cf
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The completer popup has focus, making QShortcut direct to it's window
rather than to the window the completer belongs to. As QShortcut handles
the case for Tool windows that have a parent, but doens't do the same
for popups. And they shouldn't be treated the same way, as a context
menu popup for a e.g. text edit should in fact block the text edit's
shortcuts while open.
However, the completer popup is special, in that it explicitly makes the
widget completes for its focusProxy, which is what we can use to fix
this issue.
Change-Id: Ie7177d39668b3af14a1d9e0ee5d93eca9c67c8af
Fixes: QTBUG-4485
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This saves us lots of .toQString() and .toQStringList() typing when
qDebug()'ing qmake code.
Change-Id: I037e5e1816f2dcb6a20dec4c275f3d886f155ad5
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
'make clean' removed the import libs for DLLs which makes them quite
unusable. Move the import lib removal to the 'distclean' target.
Fixes: QTBUG-51977
Change-Id: I727d520435f88a83a7fb14cb0ad81f8fe7c6d61b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
... in case the submenu is set from a slot, attached to the aboutToShow()
signal. Normally, with a 'statically' pre-populated menu, we set 'submenu'
property on a menu item from 'updateItem' callback in our menu delegate.
After that, AppKit calls our delegate's willOpen call back and this is
where we emit 'aboutToShow'. Unfortunately, if an application tries to
create a nested menu 'dynamically' at this point, it never becomes 'submenu'
of the item, since 'updateItem' was already handled at this point.
We catch this case in QCocoaMenuItem and call setAttachedItem if needed.
Fixes: QTBUG-76060
Change-Id: I676bf1d8529b9ddbfc90e4dff422b39668b7a5fa
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
81e298a51d fixed a case where the focus
chain was screwed up when the order was already correct. This worked
correctly in most cases but not when the next focus widget of the first
one had Qt::NoFocus.
The optimization check if lastFocusChildOfFirst is the same as second is
thrown away since it now does not longer screw up the focus chain and
the save would only be four pointer assignments.
Fixes: QTBUG-75388
Task-number: QTBUG-10907
Task-number: QTBUG-68393
Task-number: QTBUG-69619
Change-Id: I581ed532156c34ea970123afd063194aab016304
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Explain why there are two accessor functions for the global statics,
and use the global statics directly inside qapplication.cpp for
consistency.
Change-Id: Ibf3952052c1d0e780a8aab220a72f05af0c070a5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
initSystemPalette() already takes care of this.
Change-Id: I6521763a74ec3ec629d9fcf05aa2a7cd71a7f26d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
initSystemPalette() already calls this when there's a platform theme, which
is the only case where initializeWidgetPaletteHash will have an effect.
Change-Id: I814ea2bb17ef40aee769f2c36f8ef4296cfca020
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Only uses a single place and avoids following the init logic through
multiple layers when trying to debug it.
Change-Id: I8fc119385edf407f69fb5431dc6584288022a7fe
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The code was added in 2005, ifdefed out already, and never used.
Change-Id: Ic5d070dd031665a4429739278851b50646694bf9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QMacStyle polishes QMdiSubWindows to have autoFillBackground set to
false. If the QMdiSubWindow's widget also doesn't fill the background
(like QLabel), then nobody fills the window in a tabbed QMdiArea, and
the other subwindows show through.
This change makes sure that all pixels are painted in that situations,
using the styled frame.
Fixes: QTBUG-76214
Change-Id: Iae025d15d36a8bc0d0c5838ac43c9d54944bcc83
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QSslSocket (OpenSSL backend) does not use mutex/locks during
a handshake, so we re-enable previously skipped tests.
This reverts commit 8c87a1402c.
Change-Id: I994b085f016f0eb18b3ba439a7041ea08cd3577b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is to support rare setups involving an X11 server with multiple
independent displays ("zaphod heads" on which the DISPLAY env var
is different), possibly with multiple outputs forming a virtual desktop
on each display.
QMenu::popup() has been assuming that it should show on the screen where
the mouse cursor is. That's good most of the time; but with multiple
independent screens, QGuiApplication::screenAt(pos) cannot tell us which
screen to use (it's ambiguous), but rather will choose the first screen
that _could_ contain that position (as documented). In the example in
QTBUG-76162, the QMenu has been constructed with a QDesktopScreenWidget
as its parent specifically for the purpose of telling it which screen to
pop up on; so we need to respect that. But QWidgetPrivate::init() sets
the QObject::parent() to null (because the widget isn't actually shown
as a child of the QDesktopScreenWidget), and QWidgetPrivate::create_sys()
sets initialScreenIndex back to -1 to provide freedom to change the
screen later; so QMenu has to remember the screen index for itself.
QMenuBarPrivate::popupAction() searches the siblings of the screen on
which the menubar is claiming to be (rather than all screens on all
displays), to find the screen containing the point at the middle of the
bottom edge of the clicked menubar item. It then sets initialScreenIndex
so that QMenu::popup() will respect it rather than trying to decide for
itself.
Fixes: QTBUG-76162
Change-Id: I7a8f8e7aa2e9cf5340d446dc12726369ebe2589a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
GNOME indicates DPI modes by setting high DPI values in Xft.DPI, so
we need to use the forced DPI setting instead of the real DPI, as basis
for QPA pixel density.
Change-Id: I6f25636383b16b89a3d5fe4c904afd079fe001aa
Fixes: QTBUG-74836
Task-number: QTBUG-65424
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Converting an out-of-range FP to integer is UB. See comment in
qnumeric_p.h.
Change-Id: Ief874765cd7b43798de3fffd15a9bfe2c5fbbc01
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This is the worst fix ever, adding one more qWait. The test has been
updated in the 5.13 branch, so there a different fix will be needed. For
now this is in line with the rest of the code.
This test is currently one of the worst offenders when it comes to flaky
tests.
Task-number: QTBUG-64639
Change-Id: Ia1e71cc948997408b9658839013c9ad098111033
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When our QSslSocketBackendPrivate (OpenSSL backend) was developed,
the ancient versions of OpenSSL did not have an API needed to pass
an application-specific data into verification callback. Thus the
developers resorted to the use of global variables (a list with errors)
and locks. Some of our auto-tests use QNAM and in-process server.
Whenever the client (essentially qhttpthreadeddelegate) and the server
live in different threads, any use of 'https' is dead-lock prone,
which recent events demonstrated and which were previously observed
but not understood properly (rare occasions, not always easy to
reproduce). Now we fix this for good by removing locking.
There are two places (in 5.12) where these locks are needed:
1. Before calling SSL_connect/SSL_accept (handshake) - here
we reuse the same trick we do in PSK callback ('SSL' has
an external data set, and it's 'this', meaning an object
of type QSslSocketBackendPrivate).
2. The static member function 'verify', here we do not have
'SSL', but we have our temporary 'X509_STORE', to which
we can directly attach an external data - a pointer to
a vector to collect verification errors.
Note, this change assumes that OpenSSL Qt is build/linked
against is at least of version 1.0.1 - we set external data
on SSL unconditionally (no version checks).
Fixes: QTBUG-76157
Change-Id: I05c98e77dfd5fb0c2c260fb6c463732facf53ffc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
