QHostAddress allowed assignment from a QString, but the respective
constructor is explicit, and rightfully so. So it does not make
sense that the assignment operator is provided, because of the
asymmetry caused between
QHostAddress addr = funcReturningQString(); // ERROR
addr = funcReturningQString(); // OK (until now)
By the same token, since SpecialAddress is implicitly convertible
to QHostAddress, provide the missing assignment operator from that
enum.
Add tests, rewriting the _data() function to use the enum instead
of an int to pass SpecialAddress values, and to test !=, too.
Added setAddress(SpecialAddress), since a) it was missing and
b) to share code between the ctor and the assignment operator.
Change-Id: Ief64c493be13ada8c6968801d9ed083b267fa902
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_qtcpsocket.cpp:606:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
tst_qtcpsocket.cpp:670:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
tst_qfile.cpp(2661): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
tst_qarraydata.cpp(760): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
main.cpp:40:33: warning: ignoring return value of 'char* fgets(char*, int, FILE*)', declared with attribute warn_unused_result [-Wunused-result]
Change-Id: I80ccef29b71af6a2c3d45a79aedaeb37f49bba72
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The aim of this patch is to allow the configuration of the connect
timeout used by QAbstractSocket that is currently hardcoded to 30
seconds.
Using QNetworkConfiguration for this allows to adapt the timeout per
network configuration (e.g. 2G vs wired lan)
[ChangeLog][QtNetwork] The connect timeout from QAbstractSocket
is now configurable through QNetworkConfiguration.
Change-Id: I1dc4051be2c74f925f7a9e0a9ccef332efc2e370
Reviewed-by: Lorn Potter <lorn.potter@canonical.com>
../tst_qfile.cpp: In member function 'void tst_QFile::handle()':
../tst_qfile.cpp:2661:38: warning: ignoring return value of 'ssize_t read(int, void*, size_t)', declared with attribute warn_unused_result [-Wunused-result]
tst_qstatictext.cpp:862:58: warning: unused parameter 'textItem' [-Wunused-parameter]
../tst_qtcpsocket.cpp: In member function 'void tst_QTcpSocket::abortiveClose()':
../tst_qtcpsocket.cpp:2254:90: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Test.cpp: In member function 'void My4Socket::read()':
Test.cpp:66:20: warning: 'reply' may be used uninitialized in this function [-Wmaybe-uninitialized]
../tst_qlocalsocket.cpp: In lambda function:
../tst_qlocalsocket.cpp:701:51: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
../tst_qtcpserver.cpp: In member function 'void tst_QTcpServer::linkLocal()':
../tst_qtcpserver.cpp:935:92: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
../tst_qtcpserver.cpp:940:92: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Change-Id: Ic315069768bcb63a6b333c28ac65b0b992b0d43f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Consistent with other Unix platforms, and internally consistent between tests,
as a lot of tests were already applying CONFIG -= app_bundle manually.
Change-Id: Icd2b7e1c08015b26137af60ff82fddbc753f0ff4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
HTTP/2 allows a server to pre-emptively send (or "push") responses (along
with corresponding "promised" requests) to a client in association with a
previous client-initiated request. This can be useful when the server
knows the client will need to have those responses available in order
to fully process the response to the original request.
Server push is semantically equivalent to a server responding to a request;
however, in this case, that request is also sent by the server, as a
PUSH_PROMISE frame.
The PUSH_PROMISE frame includes a header block that contains a complete set
of request header fields that the server attributes to the request.
After sending the PUSH_PROMISE frame, the server can begin delivering the
pushed response as a response on a server-initiated stream that uses the
promised stream identifier.
This patch:
- fixes the HPACK decompression of PUSH_PROMISE frames;
- allows a user to enable PUSH_PROMISE;
- processes and caches pushed data for promised streams;
- updates auto-test - emulates a simple PUSH_PROMISE
scenario.
Change-Id: Ic4850863a5e3895320baac3871a723fc091b4aca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There are more than 1000 new entries since the table has been
generated the last time. The autotest needs to be tweaked
because the rules for the .mz domains have changed; use the
.ck domain instead.
Change-Id: Ife692afd46ac41a66604e966e5e8cb57c7aa649c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
this actually fixes the build when ssl is not enabled, as the openssl
features are in the not included network-private module.
Change-Id: Ibafae9867af493da184a45cf3981628d475d37a6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
... and move toString() implementations there which were repeated in
network tests, or #ifdef'ed in qtest.h.
Since the functions moved from network tests are now in a public header,
had to massage them a bit to pass headersclean:
- replace Q_FOREACH with C++11 range-for
- avoid implicit conversion from QByteArray -> const char* (done by
re-using toString(QByteArray) instead of calling strdup() manually)
Also made the functions overloads instead of specializations. This
allows to pass the enum by value instead of by const-&.
Like the existing QHostAddress, the newly-added toString() overloads are
marked as \internal. We can decide later whether to turn them into
public API.
Change-Id: I8c23db7a0a6575273567017d42d7b2a957acece8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
1. QSslSocketBackendPrivate::transmit was ignoring 'readBufferMaxSize';
as a result, we can have a user trying to set read buffer's size
to a small value (and more important - reading slowly in a small
chunks from this socket), but SSL itself socket reading 'too fast',
potentially growing its internal buffer to a huge size. This also
results in auto-tests failing - whenever we're trying to limit read
rate in some test.
2. Update qsslsocket auto-test.
Task-number: QTBUG-43388
Task-number: QTBUG-55170
Change-Id: Iedece26df0ac5b3b7cad62cc8c98aedc28e7ca5b
Reviewed-by: Richard J. Moore <rich@kde.org>
Move the different parts of configure.json/.pri into the libraries where
they belong.
Gui is not yet fully modularized, and contains many things related to
the different QPA plugins.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I6659bb29354ed1f36b95b8c69e7fce58f642053f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Source (.cpp and .h) files should not be executable.
Change-Id: I021d8733185d73d071fcaf3df7e529862a490b63
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Debug code is suppressed; let someone investigating a problem be able
to turn it on/off by just editing one byte instead of each line of the
block of debug code.
Change-Id: Iba06df4042d9126d3a5d0873e524ef504c19d3de
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
The (event) loop member spends most of its time NULL, so make sure
slots that dereference it can't trip up if called asynchronously when
it is.
Change-Id: If634df0ecf9650b52621bdb5a3e9f151abbc18fc
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Restructure an if { if/else} else chain so that it reads more logically.
Change-Id: I0d9a68451147d2b7e6a6d01cf7bee1a64b9902a7
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
If SSL was unavailable but requested (should never happen)
MiniHttpServer::incomingConnection() would have crashed on
dereferencing unset member client. Rework the run-time conditioning
on SSL to sit entirely inside the #if-ery on SSL support, so that
client is at least set in each code-path.
Change-Id: I9a8ee8e4186e16dd0d00b7f9cc9b988f0b4c62ff
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Moved a line of code that appeared after each call to setupSslServer()
into that function and replaced a copy of its code with a call to it.
Moved a line from the end of both branches of an if/else to after it.
Change-Id: I74ef3e643e41ce0279a6de7f4828baea4423f267
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Many struct, class and function bodies had their open braces on the
declaring line rather than on a line of their own. Split some lines
up and joined others in the course of resolving. Removed a stray
semicolon after a constructor body.
Change-Id: I492233ca8c499f13ebe4b7d63349382e5eaa1e19
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
The whole point of this pattern is that the macro can be used with a
semi-colon after it and be a single statement; if it has a semicolon
in it, that makes it two (so, e.g., using it as the body of an if,
without braces, won't let you follow it with an else).
Change-Id: I57aca35898711ca24e10ddab73e075d361ef7eb8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
- port Q_FOREACH to C++11 range-for
- port use of inefficient QLists to QVector
- port from QSharedPointer to auto variables except where the
payload is returned from a function (there ported to
QSharedPointer::create())
Fixes errors pointed out by my tree's static checks.
In sslErrors(), fixed an unwanted double-detach problem by
adding a strategic qAsConst().
Change-Id: I8148e23b73337f6f1a721e009f2974536d8447cc
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Introduce new entity: class Http2::Frame with accessors like
payloadSize/type/flags/streamID etc. (they actually read
/interpret raw bytes from a frame's buffer) instead of
duplicating this functionality in reader/writer classes.
Delete defaulted members and remove explicitly defined
move ctors/operators (not needed actually).
Update auto-test ('HTTP/2 server') to use these new classes.
Change-Id: Ie3516efbd095704e212142eef9e792323678ccfa
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since headersFrame is a reference to a vector's element, clearing this
vector before accessing headersFrame.flags is not a good idea, must be
done later.
Change-Id: I80eee0761ac1cad580e979be9371ec7588a694ac
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Recently enabled cleartext fails to build with QT_NO_SSL - fix
test and QNAM.
Change-Id: I467edab8e4eb5113715ad2d3b3022e0d8c027de8
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
- add missing \since 5.8 on free functions
- fix \relates of qHash to point to QSslDHP, not QHash, which is in another module
- API fix: use named instead of unnamed ctors
- share code between ctors
- API fix: add inline move ctor (for now, this requires using a naked d pointer,
which isn't much of a problem, since the class is immutable).
Change-Id: Ic30f9c3c03b8a3798e0676e38991ead85c587214
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
HTTP/2 does not require TLS connection, it can work in a cleartext mode.
Plus at the moment only OpenSSL backend allows HTTP/2 negotiation
via ALPN/NPN (and none of our CI configurations with OpenSSL supports
these extensions, rendering HTTP/2 auto-test useless). This patch
implements cleartext HTTP/2 ('h2c') in 'direct' mode - this is
allowed if a client has a prior knowledge that HTTP/2 is supported by
a server.
Change-Id: I4978775e9732c40bc77f549b83bb4a5d1761887e
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The deleteLater() call wasn't reliably reached when tests fail,
so use a QScopedPointer with QScopedPointerDeleteLater deleter.
Change-Id: Ica73bc73c2a0ac1e9b77e4804f2aedcad9b662a0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Instead of 'true', it should be '-1'.
Change-Id: I5e8f99153da68d34b37477ef4cedbc447fba347f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
According to QLocalSocket's documentation, connectToServer() must
initiate a connection attempt after opening the device. Otherwise, if
a connection succeeds immediately, connected() signal will be emitted
on closed device. So, this patch ensures that TCP-based implementation
behaves correctly.
Change-Id: I4cc9474815e091a1491a429a6dc17f9cf0154f58
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
In a TLS handshake the ephemeral server key is saved in the ssl
configuration. Clients who want to get the length or algorithm of the
key only get "Opaque" and "-1" as a result because the key is always
stored as "Opaque". This change converts the key to specific type so
more details are available and the client don't need to convert the
handle by hand.
Change-Id: I60f90fc2c1805e528640d391b20c676b6eeeb49e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
While connecting, the socket goes through the HostLookupState. In
this state, the socket engine is not yet created, unless the socket
had previously been bound. When it has been bound, we should keep
the socket engine even if the user initiates a delayed close by
using the write()+close() sequence.
Change-Id: Iefebcb33cd72cb49617acbac8e02af9d8209c869
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
QTRY_VERIFY seems to be a better solution.
Change-Id: I92f9d11c393d9a464716b9224da1fd9c2be956a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Add autotest for QHttp2ProtocolHandler. This patch contains a very simplistic
"in-process HTTP2 server" for testing the protocol's basic logic/flow control/error
handling and emulating possible scenarios.
Task-number: QTBUG-50956
Change-Id: Ie02d3329c5182277a3c7c84f1bae8d02308e945d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Otherwise socketDescriptor(), localPort(), localAddress(), peerPort(),
peerAddress(), and peerName() remain uncleared until close() is called.
This could take place when the connection is closed by the remote
endpoint or the user calls disconnectFromHost(). After disconnecting,
connection parameters are no longer valid, while I/O device is still
opened and may have pending data for reading. Usually, the user reads
all incoming data and closes the device independently.
Change-Id: Ic898851c39137faf64019949910f0d94ebb79df7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The file is read using CRLF line convention on Windows.
Task-number: QTBUG-24226
Change-Id: Ie08fa603e29c80a42de4bfbfd1f4237f53c22b98
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Test is strangely failing on Ubuntu 16.04 with OpenSSL 1.0.2g-fips.
Change-Id: I1498dee4c1d6db0702da3d3689787aed1e3a633f
Reviewed-by: Richard J. Moore <rich@kde.org>
This commit adds a new class called QNetworkDatagram that encapsulates
the IP packet header and UDP/IP stack metadata along with the actual
payload data. It can be used for both receiving as well as sending data.
It's called QNetworkDatagram so it can be used by QSctpSocket too, when
that lands.
[ChangeLog][QtNetwork] Added QNetworkDatagram class, along with new
function receiveDatagram in QUdpSocket that returns it and an overload
to writeDatagram that can accept it.
Change-Id: Iee8cbc07c4434ce9b560ffff13ca467f425ddc3d
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
This is the second attempt to remove 'insignificant' from UDP socket test to:
- make changes ending up in regressions more difficult (hopefully impossible) to merge
- switch to BLACKLIST if needed
- make flaky tests more visible.
For now this 'back to significant' will be accompanied by extended BLACKLIST.
New in BLACKLIST:
* OS X - datagram size-related problems (fixed in 5.7)
* OS X - multicastLeaveAfterClose - will probably stay BLACKLISTED,
seems to be a Darwin's quirk, can be fixed in OS X >= 10.10.
* windows ...
tst_QUdpSocket::echo seems to fail randomly on OS X/linux and
it looks like it fails at the same time on different machines,
should be something server-related (a guess only).
Change-Id: Ib344348ffab03fab1b9309b80449a04d8ce247c6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If a user's code, attached to sslErrors signal, calls abort/close
or disconnectFromHost but our SSL socket was configured not to verify a peer,
no need to continue handshake after calling checkSslErrors
(and finally crashing on invalid 'ssl' pointer).
Task-number: QTBUG-53906
Change-Id: I7f185511d278f9d6f16e7d6c5ba424707141459c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Now that the minimum deployment target (and thus SDK) is 10.9 for OS X
and 7.0 for iOS, all code paths affecting platform versions lower than
the aforementioned are removed.
Change-Id: Id985c7259c4ac069319d88f2c29c9559ae9e8641
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
protocolServerSide test fails with 'ssl3-any' and 'tls1.0-any' combo
on RHEL 7.2 with OpenSSL v1.0.1e-fips, it would work as OPENSSL_NO_SSL2
code-path, but OPENSSL_NO_SSL2 is not defined, so socket is in state
connected while it's expected to be unconnected.
Task-number: QTBUG-53608
Change-Id: Ib321b95129a6ab5b0691b40cb4acc612125633b2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
setEmptyDefaultConfiguration - this test (and this was stated explicitly
in comments!) must be the last test to run, otherwise, it can make subsequent
tests fail.
-exitLoop must be in 'protected slots' section not to be executed as a test,
since ... it's aux function, not a test.
Task-number: QTBUG-53608
Task-number: QTBUG-53603
Change-Id: I49d6d57ba927ecc4f20ae2d9325ad02fa46b0922
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Only the OpenSSL backend is supported right now.
[ChangeLog][QtNetwork][SSL/TLS support] It is now possible to
set custom Diffie-Hellman parameters for QSslSocket-based servers.
Change-Id: I50148873132cd0ec7e414250b107b6b4cbde02ea
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
A recent fix now makes
authenticationCacheAfterCancel(http+socksauth)
work again, so un-blacklist it.
Added a helpful comment while I was at it.
Change-Id: I2d7eae8d80c12957d22659a82e5072301735c41f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
This reverts commit 11ad50074b.
Unfortunately, udpsocket strikes back this time on OS X < 10.10 -
never seens these test failing before. Since this prevents 5.6->5.7
merge, I have to revert it until the problem investigated/fixed on OS X.
Alas :(
Change-Id: I52f6512d88c25d2e3071cb845e91faefbd455e27
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
[ChangeLog][QtNetwork][QAuthenticator] Fixed crash when
comparing a initialized QAuthenticator with an uninitialized
QAuthenticator.
Task-number: QTBUG-53338
Change-Id: Ib8b732b9c65c02ee542885e5d6fe9bd1589a6b1a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
BLACKLIST should make it, recent regression in QUdpSocket went unnoticed
(first) because of 'insignificant'. We'd like to avoid such regressions
in future (again, using BLACKLIST if needed and fixig the real problem then).
NB: BLACKLIST in this patch was extended to deal with previously unnoticed failures on
Windows and OS X. 'multicast' and related family of of functions on OS X
will probably stay like this (seems to be a Darwin's quirk), datagram
size related tests - fixed in dev or 5.7 (change is in nativesocket engine,
'bytesAvailable').
Task-number: QTBUG-52714
Change-Id: I039b05935a02983ce1648de449907dfa765f7db7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
[ChangeLog][QtNetwork][QSslSocket] TLS PSK ciphers are possible in server sockets.
Task-number: QTBUG-39077
Change-Id: Iaa854a6f50242deae5492f2e4759c727488995f5
Reviewed-by: Richard J. Moore <rich@kde.org>
Add more error messages on failures.
Task-number: QTBUG-25367
Task-number: QTBUG-25368
Change-Id: I064143a058b7b98d9d5eecab8b5da49f5307e1eb
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
QWindowsPipeWriter uses asynchronous API to perform writing. Once a cycle
has been started, the write buffer must remain valid until the write
operation is completed.
To avoid data corruption and possibly undefined behavior, this patch
makes QWindowsPipeWriter::write() take a QByteArray, which it keeps alive
for the duration of the write cycle.
Autotest-by: Thomas Hartmann
Task-number: QTBUG-52401
Change-Id: Ia35faee735c4e684267daa1f6bd689512b670cd2
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Add a named comparison method that allows the caller to
specify in how far a translation between IPv4 and IPv6 should be
performed before comparing.
Change-Id: I9aeffcd4539a6c0537c083c4553357b22167df3f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Suppress message dialog of the test helper as does QTestlib.
Task-number: QTBUG-52714
Change-Id: I5efd7d72f77c7689500ecaccf46f1f9dfb312140
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Blacklisting those autotests that prevent us to get RHEL 7.2 in the CI.
The same tests have already been blacklisted for RHEL 7.1.
Change-Id: I2aa62647f7bd75681ea9e1d69bc62f9542fda5e2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Follow-up to commit 6fd205d5: document which version of danted shall
make one work-around redundant, document that another work-around is
still needed even with that v1.1.19; and remove a comment that
referred back to an XFAIL that commit 6fd205d5 removed.
Change-Id: I270b662528127c82184bff20b3cecea4f0c41b41
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
QSKIP() causes the whole test to be skipped, where this work-around
for a known quirk of the test server only requires skipping a single
Q_COMPARE(); the rest of the test passes fine without it.
Change-Id: Ie4612bd428f4cb4b342fad908cc2784fbadf069c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
