The constructor_qdate() and constructor_qtime() tests only tested
QDateTimeEdit with a QDate or QTime. Extend them to also test
QDateEdit and QTimeEdit constructors, respectively. This revealed one
surprise; the QDateEdit constructor doesn't replace an invalid QDate
with the usual start-date, as the QDateTimeEdit does. It also serves
to reproduce a bug reported in Qt 6.3, see Task-number. These are
all marked XFail for now.
Task-number: QTBUG-105322
Change-Id: Ifafb40a9b78d9314b74ca9a1710d362b9a3cb18d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It makes no sense to pass, as parameters, values that can't vary
between test data rows, so eliminate m{in,ax}imum{Dat,Tim}e
columns. There were no parameters used to control how those would be
set, so they were always going to be the type's defaults.
The displayDateTime was only needed for the invalid test, in which its
value is known and fixed; for the normal test it was necessarily
implied by the parameter used to initialize the QDateTimeEdit. While
the QDate and QTime tests do have to supplement that construction
information, the other part is again known and fixed. We can check the
data-tag against "invalid" to determine which known and fixed data to
use, saving the need for a data table column.
Change-Id: I3754ba1a6a127a4a872a7f4a3e7edad9a5ff0ec0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Microsoft recommends to use CoInitializeEx()
and SetWindowLongPtr()/GetWindowLongPtr() in new code.
Use COINIT_DISABLE_OLE1DDE to avoid overhead of
initializing and using obsolete technology.
Pick-to: 6.4
Change-Id: I9d16943e864d4487dd4f46fd9325579c298c52b9
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
And fix all the new warnings.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: I2a5791f495575d71d2344429aca3363f9922e31b
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
... when QT_DISABLE_DEPRECATED_BEFORE is past the deprecation version.
This commit actually stops using the deprecated signals when we build
Qt with QT_DISABLE_DEPRECATED_BEFORE >= 0x060000. Otherwise we will
get a compilation error because the signals will be removed.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: Ie513ecc9451bf2d88f80857cf19f3d2b4958d022
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
That test has a very flaky history on Windows 11, presumably because
there are even more fade-in/out effects. Wait longer for those to
finish.
Fixes: QTBUG-102239
Pick-to: 6.4 6.3 6.2
Change-Id: I1d59f4422469e60a8c4dc5a52c48f0344e954491
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
a61bf508e3 reduced the tolerance from 4 to
3 in one case, making the test more rather than less flaky on systems
with a device-pixel-ratio of 1.
Pick-to: 6.4 6.3 6.2
Change-Id: I245443f0dcb1aa40176c127025501b63f12f161b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We set Qt::X11BypassWindowManagerHint on the view, which regularly makes
the test fail on X11 systems in the
QVERIFY(QTest::qWaitForWindowActive(dummyView.data()))
check.
If the view fails to show, skip the test instead of failing, we are not
testing anything X11 specific here, running this test on other platforms
will be good enough.
Pick-to: 6.4 6.3 6.2
Fixes: QTBUG-98921
Change-Id: I46dbcddf51ee1e92eb3bbb29bb57fcc314266bea
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The test already accepts an error margin for coordinate mapping. It is
still flaky, so make that margin larger if the DPI of the widget >1.
Pick-to: 6.4 6.3 6.2
Change-Id: I0a598e5e94ac82c551cbeb935e2fa08cad048f84
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Running this test on Wayland passes for me, so maybe something
has magically improved.
Change-Id: I161b697c5be96af48938228267cb405048c78852
Reviewed-by: Inho Lee <inho.lee@qt.io>
Use a signal spy to watch for the relevant signal from the file system
model and wait for that before checking whether the completer responded
to that signal by showing (or not showing) the popup.
If the file system model doesn't fire within the default timeout of 5
seconds, skip the rest of the test.
Fixes: QTBUG-46113
Pick-to: 6.4 6.3 6.2
Change-Id: I9becfe19a220bdb178ed8275c327d55ea19aa342
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For built-in types, this is a compile-time assert - we should not have
any types in Qt for which we have neither debug streaming nor a
QTest::toString specialization implemented. A build of most of Qt
submodules passes with this change, after minor modifications to some
tests. We cannot declare QSizeHint::Policy as a metatype after the
QMetaType has already been instantiated for it, and the QDebug stream
operator for QElaspedTimer needs to be correctly declared within the
namespace.
Add a self-test function for a custom type, and update reference files
of the self-test.
Task-number: QTBUG-104867
Pick-to: 6.4
Change-Id: I2936db5933f4589fce45f47cf2f3224ed614d8c9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Wayland does not support window activation, so rather than skipping
tests based on platform name, we can use the platform capability
(which will also cover future platforms with the same issue)
Pick-to: 6.4
Task-number: QTBUG-104241
Change-Id: Ibf5f8968f3979b789ef68f92768419bef4500fb3
Reviewed-by: Inho Lee <inho.lee@qt.io>
Different shortcut editors seem to have different preferences. By
default, QWidget seems to utilise Tab, Backtab, Return and Enter for
navigation purposes. However, some shortcut editors would like to be
able to record these keys as part of combinations to use in the
application.
Therefore, leave it with the application developers to decide what key
combinations they would like to use for finishing the key sequence edit.
This should provide enough flexibility for application developers to
customize their shortcut editor behavior.
[ChangeLog][QtWidgets][QKeySequenceEdit] Added a property to allow
defining the finishing key combinations.
Fixes: QTBUG-103844
Fixes: QTBUG-103843
Change-Id: Id84644086ca7a4f11618d510e59698a43735b99b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In Qt 6.3, a check for WA_InputMethodEnabled was removed
in QWidget, to support IM queries also for read-only
widgets (7c6e4af48). This caused a regression on iOS, which
made the input panel open for widgets that didn't support
IM at all.
A patch was merged that solved the regression (3b12305575),
but it didn't take the widget attribute into account.
Since not doing so has the potential to cause regressions,
this patch will modify the affected code once more, so that
we instead fall back to test WA_InputMethodEnabled when
ImEnabled is not implemented. This will match closely
to the way ImEnabled was implemented in Qt 6.2.
Since we, with this change, now require that either ImEnabled
or WA_InputMethodEnabled is set, our own input widgets will
fail to support IM text selection when they're read-only, since
they actually don't implement ImEnabled.
This patch will therefore also make sure that we do so.
Task-number: QTBUG-104527
Pick-to: 6.4 6.3
Change-Id: I70ad910aec38d0a74f4dd7d3115d3c45c16d2b3b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When item.height > viewport.height, the next item is not found
correctly, resulting in an infinite loop.
In this case, move directly to the next item.
Pick-to: 6.4 6.3 6.2
Change-Id: I67a40a079ca9dd9189bf84ae550758c685b83d75
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
User code in an event handler can do arbitrary things, including
operations that lead to destroying the QWidgetWindow. An example is
what the autotest does: reparenting the top-level widget to under
another top-level upon the drop. Internally this leads to destroying
the drop target's QWidgetWindow as the widget is now a child, not a
top-level.
In fact some of the existing drag and drop handling code seems to be
prepared to handle the case of having the drag target widget destroyed
in the user's event handler during a drag-move. But none of it is
prepared for having the QWidgetWindow destroyed upon returning from
forwardEvent().
The associated bug report has the same root cause, it is just popping up
now via the new 6.4 behavior: adding a QOpenGLWidget to a widget
hierarchy upon a drop leads to getting a new QWidgetWindow (if the
window only had regular raster widgets before).
To solve this, avoid touching members on 'this' after the
forwardEvent(). It looks like the handlers for mouse events follow
this pattern already, no member data is touched after forwarding events
(not sure if that is intentional or just incidental but it is the safe
solution, even if this is not feasible everywhere, but ideally input
events should take this into account).
Fixes: QTBUG-104596
Pick-to: 6.4 6.3 6.2
Change-Id: I96c704cadcd799fc5619b776e939dfdf313a27dd
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Since objectName() isn't always set, the className() makes it slightly
easier to find and fix the issue.
Also unify some wording "produce a warning", which is generic enough to
fit:
print warning in terminal
print warning in logviewer (if you're unlucky and have to use Windows?)
print warning in system journal (if you're unlucky have to use binary
systemd journal logs)
Pick-to: 6.4
Change-Id: I7522d65666cb5829c33c45039b8646dd535e21ea
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A new property Qt::ImEnabled was added in Qt 5.3.
Since the already existing widgets with IM support
(3rd party included) didn't implement this property,
QWidget got the fall back logic that if a widget
was queried for Qt::ImEnabled, and the returned QVariant
was invalid (the widget didn't implement it), we
would, for backwards compatibility with Qt 4, return "true"
(meaning that the widget supports IM).
But a side effect from this fallback logic, is that now
any widget that doesn't implement ImEnabled (or input
methods at all) report that they support IM. This will
confuse platforms like iOS, which uses ImEnabled to decide
if the input panel should show, and if text selection tools
should be enabled. The result is therefore that if you click
on a QPushButton, the input panel will open.
This patch will implement a more careful strategy to check if
a widget implements IM, if ImEnabled is missing. Rather than
saying that all widgets that don't implement ImEnabled supports
IM, we now require that the widget also returns a valid QVariant
for Qt::ImSurroundingText. We assume then, that a widget that
doesn't do so will anyway not be in need of input method support
from the platform.
Fixes: QTBUG-104527
Pick-to: 6.4 6.3 6.2
Change-Id: Ib391fd1daae92c4325e9ccb59730fbdd7c9328fc
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
At the very least, it would be important to have a single combination
key sequence. This is commonly seen in keyboard shortcut editors where
QKeySequenceEdit is very much applicable.
[ChangeLog][QtWidgets][QKeySequenceEdit] Added a maximumSquenceLength
property.
Done-with: Marc Mutz <marc.mutz@qt.io>
Change-Id: Id7fa5a8593eb150fa67d7e89308492c0a200ac36
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
- Since 4edcea762d the dropsite example
shows markdown if available; and now it shows that when we do DnD
of a selection from the richtext example, text/markdown is available.
- If we artificially make html unavailable, copying and pasting between
widget-based rich text editors uses markdown.
In case markdown writer output contains unnecessary backticks due to
monospace fonts getting used, the workaround from
1ad456c908 is applied.
Pick-to: 6.4
Task-number: QTBUG-76105
Task-number: QTBUG-103484
Change-Id: Ie6ca4dbb450dbc36b3d09fd0df1ae5909aaebca7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QGraphicsItems may override itemChange to prevent certain attribute
changes. Overriding ItemSelectedChange this way is explicitly documented
to be allowed.
However QGraphicsScene::clearSelection did not test whether items were
in fact deselected after the call to setSelection, and always cleared
the stored set of selected items.
Fix this by checking the actual selected state of the item as we iterate
over them, and store those items that are still selected in a set that
becomes the new selectedItems set (which will be empty if no item
overrides, which is the default).
Add a test that also checks that clearing the selection emits the
selectionChanged signal correctly (and does not if all selected items
block being deselected).
Fixes: QTBUG-85474
Pick-to: 6.4 6.3 6.2
Change-Id: I665afc132876e02e6e1061b7be37f4f6e4be418f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When QWidget::resize() is called on a maximized or minimized QWidget,
the window state of the widget and the corresponding QWindow is not
updated (i.e. remains maximized or minimized).
This patch updates the window state to Qt:WindowNoState when
setGeometry() is called in QWindowsWindow or QXcbWindow.
A test is added in tst_QWidget.
Fixes: QTBUG-104201
Pick-to: 6.4
Change-Id: I07491fb9293d13509573fc403750da0a50f6a785
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Restoring the toolbar state of a QMainWindow could not update
QWidgetPrivate::widgetItem for the QToolBar, because at that point it
was still holding the pointer to the widgetItem of the previous state.
Later on, when the new state was successfully applied, the previous
state was deleted, and the corresponding widgetItem was reset to
nullptr.
This patch explicitly resets the QToolBar's widgetItem while updating
the state, so that it is later correctly updated while creating a
new QWidgetItemV2.
Fixes: QTBUG-102395
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: I17613d62423edcc0faf85ecb0a714865a50d87e8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QComboBox uses QPersistentModelIndex to store the current index of the
underlying model. When the model is cleared, that index is automatically
invalidated, so calling QComboBoxPrivate::setCurrentIndex(QModelIndex())
does not result in signals being emitted, because we do not detect the
index change.
This patch uses indexBeforeChange to detect such situation and emit all
necessary signals.
Fixes: QTBUG-103007
Pick-to: 6.4 6.3 6.2
Change-Id: I29326830a30a17900839e8d1737a08bd940081ea
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Found by codespell
Pick-to: 6.4
Change-Id: Ie3e301a23830c773a2e9aff487c702a223d246eb
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The code incorrectly tried to ensure that the firstVisible tab was a
valid index, even though there might not be any visible tab left after
removing the last visible tab.
The same logic didn't exist of the lastVisible tab, so we tripped the
assert in qBound, as max (being -1) ended up smaller than min (0).
Fix this by removing the wrong correcting of firstVisible to be always
valid. Make sure we emit currentChanged with -1 when no visible tab is
left after removing the current tab.
Add a test.
Fixes: QTBUG-104003
Pick-to: 6.3 6.2
Change-Id: I27e6438a02d0a0f1ac4d0e0160cee4f33b3f3766
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The documentation says we can change window parent to avoid the widget
deleting the window. That didn't work as the widget didn't get the
child-removed event as it wasn't the parent.
This patch instead uses an event filter on the set parent.
Pick-to: 6.3 6.2
Change-Id: I1f61d1832fcf3257722f305beeefd8f1abf1f656
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
When replacing a widget in a hidden splitter, then we only need to keep
the new widget hidden if the previous widget was hidden.
If the new widget is not explicitly hidden, and the splitter is already
visible, then we need to explicitly show the new widget.
Augment test case; the existing test cases already cover swapping out a
collapsed or hidden widget.
Fixes: QTBUG-102134
Pick-to: 6.3 6.2
Change-Id: I9b60711a5c1cab79777ce4183783114a16ac3394
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This reverts commit 1e938c348b
and bb2f4d08d9.
bb2f4d08d9 causes the crash, but 1e938c348b amends it, so
this reverts both. When the cause of the crash has been determined
and mitigated, the patches can be recreated.
Fixes: QTBUG-103719
Change-Id: Ifc36b3771a96f6c85387a5306a0402d4c508d006
Reviewed-by: David Faure <david.faure@kdab.com>
When XCB_INPUT_TOUCH_BEGIN closes a popup, we then receive
XCB_INPUT_TOUCH_END, and cannot find a target window (because it's
destroyed). If we don't deliver it, we need to at least clear the
stored point from QPointingDevicePrivate::activePoints. Then when
we deliver the next touch press, m_fakeMouseSourcePointId also
needs to be reset.
It's now even more paramount that autotests (and real-world
touchscreens) must never omit any active touchpoint from a touch event.
If a point doesn't move, it must be included in the QTouchEvent, with
Stationary state. If not, QGuiApp::processTouchEvent() could generate
multiple TouchBegin events in a row, which gets other bits of logic
confused, here and there.
Fixes: QTBUG-94557
Fixes: QTBUG-98519
Fixes: QTBUG-102751
Fixes: QTBUG-103706
Pick-to: 6.2 6.3 5.15
Change-Id: Ia95e410a2bb8bc7784aa5d296fac2b89e53a9f55
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Invalid inserts of items are tested. However, on an invalid insert
of QTreeWidgetItem into QTreeWidget, the QTreeWidget does not take
ownership of the to-be-inserted items. These items were leaked in
the past.
This patch introduces a scope-guard, so the items are not leaked.
Change-Id: Ib53ac02605c3a3c0bd1ae69bbd0876f860d08093
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Several classes in QWidget use QDataStream internally in order
to save and restore state. These QDataStream usages were not
versioned, meaning that if Qt changes the serialization for some
datatype, then the data saved between different Qt versions becomes
incompatible. Note that the save/restore API in question just produce
opaque blobs as QByteArrays -- the user has no control over the
QDataStream objects and thus versions.
Fix by version the usages.
In QHeaderView this has caused a regression because QBitArray *did*
change version between Qt 5 and 6. In general, using QDataStream without
explicit versioning is a mistake, so deploy the same fix elsewhere as
well.
Fixes: QTBUG-99487
Pick-to: 5.15 6.2 6.3
Change-Id: I82bb5c266f4e5dedc0887cbef855dccab1015e29
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: <doctor.whom@gmail.com>
In a QGraphicsTextItem without a width yet, there's no need to do any
layouting. The use case is obviously items with an app-defined size,
not the default where text items adapt to their contents.
Results:
0.065 msecs to create a QGraphicsTextItem with some text (layouted)
0.036 msecs to set everything up in a QGraphicsTextItem with 0 width
QTextEdit was abusing the width 0 to mean "no wrap, width comes from
contents", but since the value -1 means that already in QTextDocument,
QTextEdit now uses a width of -1 for that meaning.
Change-Id: I67ad59c305e5dd34830886e4e6c56dde03c93668
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
A class that reimplements a virtual function isn't using the override
keyword, which generates a warning during compilation.
Pick-to: 6.3
Change-Id: Ic39ea24993e031f95ac9e61c3285d3be05fe6c34
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
We don't support it any more. I don't think it has ever properly
compiled Qt 6 (and it's no longer working for me against GCC 12's
libstdc++ headers). If you report a bug against it, Intel support's
first question is if you can try instead the new Clang/LLVM-based oneAPI
C++ compiler.
So we support only that one, which identifies itself as Q_CC_CLANG.
Change-Id: I5ff8e16fcdcb4ffd9ab6fffd16eb57a092c8439e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Remove a processEvents() call followed by a QCOMPARE and turn it
into a QTRY_COMPARE. Otherwise it seems to be randomly failing on Ubuntu
22.04.
Change-Id: I3c1b9d55c857c79ffd36aeb98971db60267adace
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Problem: if you create a hybrid Widgets and Quick Controls
application, you would need to use QApplication rather than
QGuiApplication. But in that case, the QQuickWindows would
never receive window activation events from QApplication.
And this causes problems for controls, since, for example,
the palettes in use there will never update upon activation
changes, and instead sometimes get stuck as e.g QPalette::Inactive
after application startup.
This patch will make sure that we send out activation events
also for QWindows that are not QWidgetWindows.
Pick-to: 6.3 6.2
Change-Id: I649f5c653081c0c5249f4faf28a7de2c92f17421
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Check DockWidgetArea permissions of QDockWidgetGroupWindows with single
dock widget. Obtain a dock widget's tab position from a dock widget
group window if it can't be established otherwise. Remove hardcoded
assumption that a dock widget is in the left dock. Both cases have lead
to inconsistent entries and dangling pointers in
QDockAreaLayoutInfo::item_list.
Remove warning: QMainWindowLayout::tabPosition called with out-of-bounds
value '0', which becomes obsolete by the fix.
Create a QDockWidgetGroup window prepered to become a floating tab,
whenever a dock widget is being hovered over. Store it in item_list so
it can be found and deleted when required.
No longer call e->ignore() after propagating close events to the first
dock widget and thus preventing others from receiving the event.
Add logging category qt.widgets.dockwidgets
Update dock widget autotest with tests to check the fixes mentioned:
plugging, unplugging, hiding, showing, closing and deleting.
Blackist closeAndDelete, floatingTabs test on macos, QEMU, arm, android
due to flaky isFloating() response after a dock widget has been closed
or plugged.
QSKIP dockPermissions and floatingTabs test on Windows due to mouse
simulation malfunction.
QSKIP hideAndShow test on Linux in case of xcb error (QTBUG-82059)
Fixes: QTBUG-99136
Pick-to: 6.3 6.2
Change-Id: Ibd353e0acc9831a0d67c9f682429ab46b94bdbb0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
tst_qmessagebox was disabled because it crashed.
It does not any more. Now it hangs, which
is a new problem.
Fixes: QTBUG-87671
Task-number: QTBUG-101217
Pick-to: 6.2 6.3
Change-Id: Iec15cf82a4112ee79182ec091622e40147bd3e7f
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This reverts commit b39d3cfe30.
Reason for revert: the test fails in dev again
Task-number: QTBUG-87404
Change-Id: Icc51e36e037e9c7e8154266def129dd8ad412775
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
To allow other cases to run while finding the reason. Most of these
cases fail only on CI and not locally.
Pick-to: 6.3 6.2
Task-number: QTBUG-102043
Change-Id: Ib552ab00b4232f6aabdf85acf050633251d9e71d
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Skip the crashing case temporarily to allow other tests to run
while finding a fix.
Pick-to: 6.2 6.3
Task-number: QTBUG-100470
Task-number: QTBUG-102043
Change-Id: I8b16f95e5c66b95cc9959494b5317d39d58194e6
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Commit a35a7fcb5a introduced the usage
of insets to correctly take into account the default Android status bars
and other reserved regions.
However in practice that does not work as expected - the bottom inset
is always reported to be non-zero, even when fullscreen mode is enabled.
To fix the issue, FLAG_FULLSCREEN is explicitly checked before applying
the insets.
Fixes: QTBUG-99624
Pick-to: 6.3 6.2
Change-Id: I8b25f0b06447cd452c42ef072493e3137e25f38b
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Fix some obvious issues, QSKIP or blacklist other problems.
This does not fix all the test failures, but allows to enable most of
the test cases, so that we could catch future regressions.
Task-number: QTBUG-87668
Pick-to: 6.3 6.2
Change-Id: I1ed0b476d4ac55c658c572cfa1379fcdc6137ee8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Now when 71b3d18ea7 is merged,
we can re-enable the previously skipped tests, as they do
not crash anymore.
Task-number: QTBUG-101423
Task-number: QTBUG-101321
Task-number: QTBUG-87417
Pick-to: 6.3 6.2
Change-Id: I6b4b3619b0af5e48b5e92b514bc0ab6586a76d51
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
If the active QWidget gets destroyed, then QWidgetWindow::focusObject
will return nullptr. If then no other object takes focus, then we'd
never emit change signals, and QGuiApplication's _q_updateFocusObject
(which then informs the input context and emits signals) didn't get
called. This left the input context with a dangling focus object
pointer, which resulted in crashes.
If the QWidget clears its focus, but the corresponding window doesn't
know that it had focus, then fall back to the widget's focus widget
to see if we have a change in focus, so that signals get emitted.
Add a test case that shows that we didn't call _q_updateFocusObject
by counting emissions of the QGuiApplication::focusObjectChanged
signal, which we emit in this function. The signal is emitted more
than once both when showing a widget, and now also when destroying
a widget that has a focus child. The former is a previous issue,
the latter is an improvement to not emitting the signal at all.
Pick-to: 6.3 6.2
Fixes: QTBUG-101423
Fixes: QTBUG-101321
Change-Id: Ib96a397211d442f52ce795a3eebd055a0ef51b0d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Don't mix unsigned and signed types in comparisons.
Pick-to: 6.3
Change-Id: Ia4ba9c114177425a21cadc8cafe8179928315a5d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
After cbf1b4bc60bca3994b8f8685ee922e53a6b4eed2 the selected item got
deselected on Ctrl+Press, which made Ctrl+dragging a selected item
impossible.
Only deselect on Ctrl+Release. Add scenario to existing test case,
and update the documentation to clarify the properties involved, and
to point out that the event parameter might be nullptr.
Fixes: QTBUG-101647
Pick-to: 6.3 6.2
Change-Id: I749b1cb1a0a311f5c1d4c333984716f05f2c90b5
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Volker Enderlein <volker.enderlein@ifm-chemnitz.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Skip some of the obviously failing QCompleter-related tests instead of
blacklisting them.
Skip a test that causes a crash.
This allows to re-enable this test in CMakeLists.txt for Android.
Task-number: QTBUG-87417
Pick-to: 6.3 6.2
Change-Id: Ie7ee708df8ceddf117689e8ac749850ba86e8816
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The test is very flaky on Windows 11. Make sure that we have a secondary
window to close before proceeding, and wait for fade effects to finish,
otherwise we might never get the leave event from the windowing system.
Also replace a QVERIFY(qWaitFor) construct with a simple QTRY_VERIFY.
With these changes, a local run of 20 repeats of this test on a stressed
VM improves from 75% to 100%.
Pick-to: 6.3 6.2
Fixes: QTBUG-98477
Change-Id: Iedcc175b336e3cab23817b954aba1736d02f1b9d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Adapt to changes in QWidget::addAction API from 08e4d2db08.
Pick-to: 6.3
Change-Id: If6e05b47de88cf55070238f08b96586b855cc5c1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This was lost when QtCore, QtGui and QtWidgets were split up. Restored
now via a virtual function on QObjectPrivate.
Chose to return std::string instead of QString or QByteArray because
its SSO is usually sufficient to hold these flag strings.
[ChangeLog][QtCore][QObject] Restored printing of Qt3-style
information from dumpObjectTree().
[ChangeLog][QtWidgets][QWidget] Restored printing of Qt3-style
information from QWidget::dumpObjectTree().
Fixes: QTBUG-101732
Change-Id: I39ff5728ea5f5abbdbf81b5d7e13b8d16b6ee8b7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Selection change handlers of the items might call a method that
implicitly recreates the selectedItems QSet, which then invalidates
the iterators of the ranged for loop, resulting in crashes.
Iterate over a copy of the set instead.
Add a test case that crashen without the fix.
Fixes: QTBUG-101651
Pick-to: 6.3 6.2
Change-Id: I6da6f4043fe1906b0186931a37283f635cb5a404
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
ClipboardManager didn't have any APIs to clear clipboard data before
API level 28.
As a workaround an empty Intent with MIMETYPE_UNKNOWN is created and
inserted into the clipboard for lower API levels.
This makes the QApplication::clipboard()->clear() method work more or
less as expected.
This allows to unblacklist tst_QPlainTextEdit::copyAvailable().
Task-number: QTBUG-87423
Task-number: QTBUG-89402
Pick-to: 6.3 6.2
Change-Id: I454376199cf3b8eed0fa2ecf2f85b87f40892280
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The test task191545_dragSelectRows relied on the fact
that the view is not scrolling. But on a small screen,
it scrolls automatically.
Fixes: QTBUG-87407
Pick-to: 6.2 6.3
Change-Id: I691361c965ab03d8a012f2b83715c7c96d990ec5
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Android 9 introduce an API call to clear the clipboard, before that
it wasn't possible to do that, the test QPlainTextEdit::canPaste()
should expect that to fail.
Pick-to: 6.3 6.2
Task-number: QTBUG-100470
Change-Id: Ie2d8aabf77672c62b3a6c72a080a4e37f1696303
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Amends a74cdf778c, after which the
initialization of items in invisible rows is skipped. Since data members
in QFormLayoutItem were lazily initialized, this resulted in out-of-bounds
access of QList entries.
Use member initialization for all QFormLayoutItem fields, and check that
vLayoutIndex is valid before using it to access the list entry. Skip
labels and fields for which it is not initialized.
Add test case. As a drive-by, silence the test's provoked warning
messages via ignoreMessage.
Change-Id: I374b414a51df20b9af3087a2676061fc6b7f23e2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Found when retesting the testcase completer.zip from QTBUG-54642
Pick-to: 6.3 6.2 5.15
Change-Id: Id84eefeb3a33dc6d790cfa23755352381cc097a9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
And remove their uses.
[ChangeLog][QtCore][Deprecation Notice] Deprecated QString::count()
and QByteArray::count() that take no parameters, to avoid confusion
with the algorithm overloads of the same name. They can be replaced
by size() or length() methods.
Change-Id: I6541e3235ab58cf750d89568d66d3b1d9bbd4a04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We want to mark the corresponding QColor ctor(s) explicit.
Use Qt::GlobalColor or the new QColor::fromString() instead.
Change-Id: I68bf75a094e6821b97682de5a0ffd975834d22d0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QComboBox is included because it works like a button when it is not
editable. QGroupBox is included because it has a checkbox and QCheckBox
is a subclass of QAbstractButton.
Change-Id: Iad89259314e77f78c915dce83ec601df94c88941
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Qt Creator crashes when max is INT_MAX and min is -1, see bugreport.
Change-Id: I441e76c0ff87052083ed3d77e6085b186402e5d8
Fixes: QTBUG-101581
Pick-to: 6.2 6.3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Without this change, the test fails when run twice in a row. Also, skip
the test if we can't move the cursor.
Pick-to: 6.3
Change-Id: Ic45c073007d114fbd7825cedef6761c1e410b4af
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test crashed for some reason, so other testcases are also not
executed. Skip the test for now to enable more tests in the CI
Task-number: QTBUG-89402
Pick-to: 6.3 6.2
Change-Id: I5ad38645d1b8f86c64da7208c0ae4f66d126c7d9
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Most of the blacklisted tests were already fixed earlier.
The tst_QPlainTextEdit::adjustScrollbars() test needed a small fix
to show the window non-fullscreen, so that the scrollbar could appear.
Task-number: QTBUG-87423
Task-number: QTBUG-89402
Pick-to: 6.3
Change-Id: I849f411a5798053742323fc4db3fe30f2b690a8b
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This test crashed and prevents other testcases from execution.
The test requires a proper fix, but that's not trivial, so skipping
to enable more tests in the CI for now.
Task-number: QTBUG-101321
Pick-to: 6.3 6.2
Change-Id: I1bd4b1182cc868a36391a718457eae647675fc17
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
This test uses the cursor. However we have no cursor support on Android.
Skip the test instead of blacklisting it, because that is the correct
behavior.
Fixes: QTBUG-87389
Pick-to: 6.3 6.2
Change-Id: I1a2d2dd406b3d7da1bc70b51c2072a83d9a29ca5
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
tst_qmenu was disabled because it crashed.
It does not any more.
Task-number: QTBUG-87671
Task-number: QTBUG-87424
Pick-to: 6.2 6.3
Change-Id: I1a3a1d2861b5a8f20d83fd8ba38fdcb3c88faee9
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qfiledialog was disabled because it crashed. It does not any more.
Task-number: QTBUG-87671
Task-number: QTBUG-101194
Pick-to: 6.2 6.3
Change-Id: Icfda2cd01677f3a076b74429fcf66a1de79d2aa9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
When we create a QPixmap using QWidget::grab(), a default system
image format is used for that.
On Android this format is ARGB32_Premultiplied, while on the desktop
systems it is RGB32.
The images that are saved in the resources and used as references, also
have the RGB32 format.
As a result, on Android we need to convert the pixmap to a proper format
before comparing it to the reference.
Fixes: QTBUG-69064
Pick-to: 6.3 6.2
Change-Id: I2d881e508d34e0b1a2a1a7bffcbc71ae2907d31d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
QHeaderView creates persistent indexes in
_q_sectionsAboutToBeChanged(), called by the slot connected to
rowsAboutToBeMoved/columnsAboutToBeMoved.
In the case of rows, QAbstractItemModel emits the signal *before*
preparing to update persistent indexes in itemsAboutToBeMoved(),
so it can see the ones newly created by QHeaderView, all is well.
In the case of columns, the emit was done *after* calling
itemsAboutToBeMoved(), so the additional persistent indexes created by
QHeaderView were ignored, and in endMoveRows() we could end up with:
ASSERT failure in QPersistentModelIndex::~QPersistentModelIndex: "persistent model indexes corrupted"
This bug has been there since the very beginning of beginMoveColumns(),
but was undetected because moving columns in a model is pretty rare
(in my case there's a QTransposeProxyModel that turns columns into
rows in the underlying model, and a proxy that handles dropMimeData...)
Pick-to: 6.3 6.2 5.15
Change-Id: I74bad137594019a04c2a19c2abb351ff3065c25a
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The content of the window was intended to trigger wrapping.
On Android, the window is larger, so more content is
necessary. This patch adds more content.
Fixes: QTBUG-87401
Pick-to: 6.2 6.3
Change-Id: I33a2fe4560c358f2b0b83523ee4ab26bb5dd2513
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Hiding a row in a form layout is inconvenient to do as access to the
widgets in each row is cumbersome. In addition, a row might include a
layout for the label or the field column, and we can't hide layouts and
instead need to navigate to the widgets inside the layout. And even if
an application developer does all that, the spacing calculation doesn't
ignore hidden rows.
Add setRowVisible and isRowVisible APIs with the usual overloads.
Implement the logic to traverse a layout item to its contained widgets,
so that they are explicitly hidden when a row is hidden, and skip hidden
rows in the spacing calculation.
[ChangeLog][Widgets][QFormLayout] New APIs setRowVisible and isRowVisible
to hide and show rows in a form layout.
Fixes: QTBUG-6864
Change-Id: I6af98409802f331c4523e91d7dac8a97762c579d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
tst_qgraphicsview was disabled because it crashed.
It does not any more.
Task-number: QTBUG-87671
Task-number: QTBUG-87397
Pick-to: 6.2 6.3
Change-Id: Ib604274d098c271e22b010e6cb822fdf9553df1c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Samuel Mira <samuel.mira@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
There was a test for Qt4 compatibility in tst_qheaderview.
We don't run it since Qt 6.
This patch removes the unused code.
Change-Id: I751829ac5a142e79379e81e9e739107544cf7406
Reviewed-by: Arnaud Bienner <arnaud.bienner@gmail.com>
Reviewed-by: David Faure <david.faure@kdab.com>
The view.resize() command has no effect if the requested
size is smaller than the screen. So the view has space for
the whole model. It then won't scroll, so scrolling cannot
be tested.
This patch enlarges the model so that scrolling is always
necessary and thus possible.
Task-number: QTBUG-87407
Pick-to: 6.2 6.3
Change-Id: Ibff512158d9c16be120a69c7328b6d0ae2c3b551
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Some tests were blacklisted, but the problems cannot be reproduced
any more. This patch activates them.
Fixes: QTBUG-87404
Pick-to: 6.2 6.3
Change-Id: I5944c750a5717daaf43a22d6d1fa51ae54fc3da2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qopenglwidget was disabled because it crashed.
It does not any more.
Task-number: QTBUG-87671
Pick-to: 6.2 6.3
Change-Id: I7ea55f262f362c098b52e1b1a319b26c31a7e067
Reviewed-by: Pekka Gehör <pekka.gehor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Port the test to use the QWindow* based overloads of QTest::mouseMove()
and move the cursor away.
Pick-to: 6.3
Task-number: QTBUG-98489
Change-Id: Id1ac0ef176c6f9bf179f989ddd5775877525fc0d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Tests are run for QNX in qemu similar to b2qt currently (using offscreen
plugin and software rendering). So the issue is same.
Pick-to: 6.2 6.3
Task-number: QTBUG-100930
Change-Id: Ie973c6c611ac48703fd7cce53925940b80858bc8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Scroll tests relied on having a small window. On Android, the
window can not be smaller than the screen.
This patch changes the tests so that the windows have large
enough content so scrolling can happen.
Fixes: QTBUG-87408
Pick-to: 6.2 6.3
Change-Id: I26a444518fd934527089297c594673937f0ecf88
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qabstractitemview requires a movable cursor.
This patch skips the test if there is no movable cursor.
Pick-to: 6.2 6.3
Fixes: QTBUG-87400
Change-Id: I4e917b2ad062ce068f23603410aa9209edb9828d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
If adding a QLineEdit to a QGraphicsScene as a QGraphicsProxyWidget, the popup
completion of that QLineEdit is drawn in the wrong location. When the completer
getting the rect of screen, it gets the rect of the QGraphicsScene where
QLineEdit is located rather than the rect of the screen, resulting in an error
in the following calculation.
Note that as long as the completer popup is a toplevel widget not parented
to the target widget, it will not be automatically embedded into the graphics
view via QGraphicsProxyWidget. So with multiple views for a scene, or in views
that use transformations, the geometry will still be off.
Pick-to: 6.3
Task-number: QTBUG-20531
Change-Id: If5d8a707ca35a9e4709117b077978145c6143e46
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Even QtCore alone cannot be built without the properties feature since
Qt 5.5. While fixing this is easy, other modules like dbus,
networking are also using QObject::property() and friends liberally.
All in all I doubt that anybody will miss the feature (otherwise it
would have been fixed in the last decade).
Change-Id: Iaf3cc20bda54ee2ff3b809fac8fa82b94ecc88c0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove Integrity and Android specific code that explicitly adds
test data to the resource files. qt_internal_add_test functions
implicitly adds test data to resources for Android and Integrity
platforms by default.
Change-Id: Ia1d58755b47442e1953462e38606f70fec262368
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Multiple tests use qt_internal_add_resource that copies the
functionality that is already implemented inside the
qt_internal_add_test function. Simplify these test by replacing
the qt_internal_add_resource call with the new BUILTIN_TESTDATA
option.
Change-Id: I18475b817d6f87264f0de53817d6c26c5ccab4e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Size a QMdiSubWindow is no real toplevel widget, QLayout::activate() did
not properly set the minimum size based on it's children. Fix this by
treating a QMdiSubWindow as a toplevel widget during the calculation.
Fixes: QTBUG-100494
Change-Id: Ia2e6c519c7214c36383facd244711bd932231d40
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If one calls setPlainText("") before setting a placeholder text,
the placeholder visibility is not updated, and the placeholder is not
visible. Fix it by updating placeholderVisible properly.
Fixes: QTBUG-96212
Pick-to: 5.15 6.2 6.3
Change-Id: I1bd3f0cb4c59973a847bcf3787e35d7c17b6d673
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Unless "." (or the empty string) is in $PATH, we're not supposed to find
executables in the current directory. This is how the Unix shells behave
and we match their behavior. It's also the behavior Qt had prior to 5.9
(commit 28666d167a). On Windows, searching
the current directory is the norm, so we keep that behavior.
This commit does not add an explicit check for an empty return from
QStandardPaths::findExecutable(). Instead, we allow that empty string to
go all the way to execve(2), which will fail with ENOENT. We could catch
it early, before fork(2), but why add code for the error case?
See https://kde.org/info/security/advisory-20220131-1.txt
[ChangeLog][Important Behavior Changes] When passed a simple program
name with no slashes, QProcess on Unix systems will now only search the
current directory if "." is one of the entries in the PATH environment
variable. This bug fix restores the behavior QProcess had before Qt 5.9.
If launching an executable in the directory set by setWorkingDirectory()
or inherited from the parent is intended, pass a program name starting
with "./". For more information and best practices about finding an
executable, see QProcess' documentation.
Pick-to: 5.15 6.2 6.3
Change-Id: I54f205f6b7314351b078fffd16cf7013c97ee9fb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amends d42cfeb84f, which would result in
infinite recursion when the Edit menu was populated and added to the
menubar after the menubar has been shown.
Add a macOS-only test case that reproduces the crash without the fix.
Fixes: QTBUG-100441
Pick-to: 6.3
Change-Id: I018a7aa7f01558a3b9732b4d6d96a911dc7fbd19
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The auto-repeat timer of QScrollBar kicks in after 50ms, so if the test
takes too long and the timer fires during the qWait call or during event
delivery, then we might get multiple valueChanged emissions.
Detect that scenario and allow the test to XFAIL if things take
a significant time (more than 40ms vs the expected 1ms).
Pick-to: 6.3 6.2
Change-Id: Ie90aadc62372397db695fd2b34fe1f5252ce8d37
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
As with QHoverEvent, it's better to require globalPos rather than
"initialized to QCursor::pos(), which may not be appropriate" as the
docs have pointed out for many years now. This removes the remaining
calls to QCursor::pos() in event constructors.
Task-number: QTBUG-52430
Task-number: QTBUG-69433
Task-number: QTBUG-100324
Change-Id: I076dae56f37abaad7085cc95dddee453a80a45f3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The QSinglePointEvent ctor assumes that the given globalPos is correct,
so it was wrong that the QHoverEvent ctor passed along a local position
as global. It's better to require globalPos as an argument; and in fact
it seems that everywhere we construct a QHoverEvent, global position is
available, or possible to get by transformation (which is better than
resorting to QCursor::pos()).
Also, don't convert to QPoint: pointer events have qreal resolution and
there's no reason to truncate them.
Fixes: QTBUG-100324
Change-Id: I919455da36265988d3d149eb97563c9ed0d2c660
Pick-to: 6.3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Amends e3b2b12a91, which made the
style sheet calculate the font-dependent text size, but didn't
add the space needed for the close button or a tab icon.
QTabBar's layout code already adds the space needed for icons
and margins to the size; so instead of overwriting that size,
subtract the size needed by the normal font, and then add the
size needed for the font form the style rule, considering both
vertical and horizontal tab bars.
Fix the test case to style only one tab rather than the entire
tab bar, otherwise the font is applied to the entire tab bar,
and not just to a specific tab, which is the style sheet style
code in question.
Pick-to: 6.2 6.3
Task-number: QTBUG-6905
Change-Id: Ieed0ba146a32e81229419adecaf41f467cfd5959
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The animateClick method is a QAbstractButton member, and neither
QCommandLinkButton nor QPushButton override it. The method is tested in
the QAbstractButton test, and 3a9b7d1f18648d7236664d3adfc65c009b01e668
made that test more robust. The previous, flaky version of the test was
almost duplicated here. They add no additional code coverage, so remove
them.
Pick-to: 6.2 6.3
Change-Id: I1fa988c1eabd5054193acb1f5fa1c81d29b3878d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
The test is timing sensitive; if it takes more than 100ms
to process events, then the timer that clicks the button might
have fired. So only verify that the button is still down if 100ms have
not yet passed, and verify that at least 100ms have passed when the
click is complete.
Also use QSignalSpy to test the signal emissions.
Pick-to: 6.2 6.3
Change-Id: I95f99e204a17c6709f8e2913eefe4b487e949123
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The current behavior for handling the angle delta of a wheel event
changes index the instant there is a change in angle delta. This works
fine for mouse wheels that send events with 120 angle delta units and
there is also already behavior defined for devices with pixel deltas,
but there is nothing good for handling events from high resolution mouse
wheels that don't have pixel deltas.
This patch makes it so that the current index doesn't change until the
accumulated angle delta for the X or Y axis reaches 120.
[ChangeLog][QtWidgets][QTabBar] Scrolling with a high resolution mouse
wheel changes the current index at a rate more like a normal mouse
wheel.
Task-number: QTBUG-97844
Pick-to: 6.3
Change-Id: I2e7fd88984a253f6ef8a0008deb7233e4cb4d84a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Get rid of the function-static main window, which would be destroyed
after QApplication if the test is run with a subset of test row (that
does not include the TestEnd state test).
Make the MainWindow a class member of the test class instead, and rename
it from "mainW" to "mainWindow" to avoid shadowing by "mainW" widgets in
other test functions.
Amends 55928821d1.
Task-number: QTBUG-99630
Pick-to: 6.2 6.3
Change-Id: I83efce5b54afc3a0027a7c0e63efee6a235af585
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In Qt 5 style sheets, objects could be selected by an enum-type property
using the integer value of the enum value, e.g
QToolButton[popupMode="1"] { ... }
In Qt 6, the the new meta type system and QVariant implementation enabled
QVariant::toString to return the string representation of the enum value
instead for a property containing an enum. Since QStyleSheetStyle's
attribute matching is string based, this breaks the Qt 5 style selector,
and QCSS code instead needs to use e.g.
QToolButton[popupMode=MenuButtonPopup] { ... }
While the new syntax is arguably preferable, this is an unintentional
change that silently breaks style sheet code (no error or warning at
compile- or run-time).
To support Qt 5-style selectors, we have to change the StyleSelector
interface of the QCssParser API so that we can pass through what type
of value the attribute extractor should return; if an integer string "1"
is provided, then we need to compare the enum integer value; if the
string provided does not represent a number, then we need to compare the
name of the enum value.
Since the pure virtual attribute() method that needs to be implemented
to extract the attribute value of the node is implemented in modules
outside qtbase, add a second virtual method that takes the entire
QCss::AttributeSelector, which includes the value to match. Extractor
implementations can use it to evaluate which type of data to return for
an exact match. The default implementation calls the old attribute()
method so that existing StyleSelector implementations continue to work.
Make the respective change in the QStyleSheetStyleSelector, and simplify
the surrounding code. Adjust other StyleSelector implemnentations in
qtbase. As a drive-by, remove the superfluous virtual declaration from
those overrides.
Once submodules are adjusted to override this virtual function instead
of the (now no longer pure) virtual attribute() method, that method can
be removed.
Pick-to: 6.3 6.2
Fixes: QTBUG-99642
Change-Id: I9a2b3498f77bf7cab5e90980b7dab2f621d3d859
Reviewed-by: Oliver Eftevaag <oliver.eftevaag@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This code didn't actually use QMutableEventPoint::from(), so didn't
run into the UB that from() depended on, but it's in the way of making
QMutableEventPoint a befriendable namespace instead of a public
subclass of QEventPoint.
Replaced the QMutableEventPoint ctor that takes a timestamp, and
therefore isn't compatible with the ctors on QEventPoint, with a
static function that returns QEventPoint instead.
Port QList initialization to braced-initialization as a drive-by.
Task-number: QTBUG-99615
Pick-to: 6.3
Change-Id: If5a1dbea21cc31cdefdb640716793421c8ec0af4
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
In Qt 5, such selectors have to use the integer value of the enum
value. Using the enum value name does not work.
In Qt 6, such selectors must use the enum value by name, using
the integer does not work.
It's not clear yet what changed, possible a side effect of the
changes and improvements in the meta object system and QVariant in
Qt 6. So for now, document the difference in behavior in a test.
Pick-to: 6.2 6.3 5.15
Task-number: QTBUG-99642
Change-Id: I96e0280b191b8ca06b16a97ab3ed367e9a8f43a0
Reviewed-by: Oliver Eftevaag <oliver.eftevaag@qt.io>
Reviewed-by: Doris Verria <doris.verria@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
The header no longer uses QMutableEventPoint.
Fix TUs that relied on the transitive include.
Task-number: QTBUG-99615
Pick-to: 6.3
Change-Id: Iae4ff34ea708304fcd365fd763875dd4a97a1cf8
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The test uses a static MainWindow so that we can execute a series of key
simulations on the same window. The window is then destroyed when we
reach the final test row.
If some of the tests fail, then the window is left in an unknown state,
resulting in cascading failures for the other tests. Fix this by always
trying to show and activate the window, and always destroying the static
window if we have reached the last test data row.
Fixes: QTBUG-99630
Pick-to: 6.2 6.3
Change-Id: I466669f387e8b199e9e719a7ebbe3ae670658b7e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The CALayer backingstore never had a scroll implementation because we
were relying on the QRasterBackingStore implementation, but as it turned
out that implementation was not applicable for the CALayer backingstore.
We now implement scroll() by determining which part of the back buffer
can be scrolled directly in-place, and then scrolling the rest by
copying from the front buffer. We have to handle both cases, as clients
may scroll multiple times before flushing, and the scrolled area may
overlap both valid back-buffer content and content that needs to be
pulled from the front-buffer.
Pick-to: 6.3 6.2
Change-Id: Icc09c9488386925116779c9024669a4329b38247
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Add test to verify that allowing wordWrap actually breaks long lines.
Pick-to: 6.3
Change-Id: I09bd2d754e86ebf35db551ee76f7f037371acec9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Remove unused column in test data and unused local variables.
Pick-to: 6.3
Change-Id: Ia012fe8240cf9831c1053b76ae31216145d61732
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QWidget and QWindow use bits in QObjectPrivate to provide for a couple
of shortcuts -- one in qobject_cast, and another in the isWidgetType() /
isWindowType() functions in QObject. These can be optimized by simply
looking at the bits, without actually doing more expensive runtime
casts.
These bits were set on construction, but not unset on destruction. The
result was for instance that destroying a QWidget would report that the
object was still a QWidget when ~QObject was reached.
Fix this
1) by setting the bits only when QWidget / QWindow constructors start;
2) by resetting the bits once ~QWidget / ~QWindow are completed.
Technically speaking this is not 100% correct in the presence of data
members, but luckily those classes don't have any.
Amend an existing test for QWidget (whose comment said exactly the
opposite of what the test actually did) and add a test for QWindow.
Some other code was wrongly relying on isWidgetType() returning true
for destroyed QWidgets; amend it as needed.
[ChangeLog][QtCore][QObject] Using qobject_cast on partially constructed
or destroyed QWidget/QWindow instances now yields correct results.
Similarly, using the convenience isWidgetType() / isWindowType()
functions now correctly return false on such instances. Before,
qobject_cast (and the convenience functions) would erroneously report
that a given object was a QWidget (resp. QWindow) even during that
object's construction (before QObject's constructor had completed) or
destruction (after QWidget's (resp. QWindow's) destructors had been
completed). This was semantically wrong and inconsistent with other ways
of gathering runtime type information regarding such an object (e.g.
dynamic_cast, obj->metaObject()->className() and so on).
Pick-to: 6.3
Change-Id: Ic45a887951755a9d1a3b838590f1e9f2c4ae6e92
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test waits a bit hoping that all paint events are delivered after
showing the widget so that we can count the rectangles that are getting
updated when scrolling.
Waiting for 20ms is too short unless the system is completely idle.
Based on testing on a local VM, 150ms produces reliable results.
Pick-to: 6.2 6.3
Change-Id: I7729e94eae41476be67291a2f664cff784f96c7d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
After 7369c31ca1f446e81eda1c93ba13767ffcd83efe, unaccepted touch points
were not grabbed anymore in calls to activateImplicitTouchGrab. However,
gesture recognition relies that widgets for which a gesture has been
partially recognized grab also unaccepted touch points.
Add a parameter to allow the implicit grabbing to take place also for
unaccepted event points.
Add test case that replays touch events similar to what Squish is doing,
and fails without this fix.
Pick-to: 6.2
Change-Id: Idb0b20301b1827be57a03013a59043d97c2ee7b6
Reviewed-by: Stefan Gehn <stefan.gehn@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Expose QWidgetRepaintManager's data structures so that we can write
unit tests, and verify that they are correct after moving opaque
widgets (which triggers the accelerated move code path).
Improve the compareWidget logic to not rely on screen grabbing
(which requires permissions), but instead use QPlatformBackingStore's
toImage function, which is faster and more reliable, and also doesn't
require us to show the UI we want to grab full screen in order to
avoid issues with overlapping windows etc.
Change-Id: Iff2ea419f03a390ab6baca26814fef6ff45f7470
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
On some platforms, such as X11 and Wayland with some compositors,
QMenu could be a popup window, which should be set a transient parent
to get relative position, which is requested by Wayland.
Added transientParentWindow() for QMenuPrivate like QDialogPrivate.
Fixes: QTBUG-68636
Pick-to: 6.2
Change-Id: I6d8880cb008ecf61a4c005898b38e3953379a13d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Added to QWidgetRepaintManager test case, which is the only place where
the function is used.
Includes a helper that creates a complex scene with opaque children,
which will be used in additional unit tests.
Change-Id: I0e0188dd560923a552a8967d8e992dc17cc849d6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When you are editing in a QTextEdit and press enter to start a new line,
calling insertBlock() with no arguments tries to preserve the current
charFormat and blockFormat. That is often OK:
- if you hit enter at the end of a list item, you probably want another
item in the same list
- if you are writing code inside a code block, you're probably just
writing the next statement on the next line: stay in the same block
- margins, indents, tab positions should stay the same (but hopefully
your editor has UI to manually reset the block format to default
in case you are not continuing in the same style)
But there are some exceptions we can apply to be helpful:
- nobody ever wants to follow an <hr/> with another one (but
hopefully the application has an action to insert one manually)
- a heading is more likely to be followed by a paragraph, or perhaps
a smaller heading; another heading at the same level is unlikely.
We need to reset the char format, not only the block format, because
the large font and heavy font weight are stored there.
- when adding to a todo list, hitting enter at the end of the last task,
let's assume the next task is not yet done, so it will be unchecked
by default (else, why are you writing a todo list at all)
To achieve that, we need to customize the formats and call the
insertBlock() overload that takes them. The no-argument insertBlock()
will continue to preserve the formats, because it's an old API that is
used for much more than interactive editing.
Additionally, word processors tend to let you end a list (for example)
by hitting enter twice. In that case, you stay in the same paragraph
that you created the first time you hit enter, but now the formats are
reset to default, so that you can go on typing an ordinary paragraph,
rather than having to mouse up to the toolbar to select the paragraph
style in a combobox, or something like that. So we now do that: reset
both block and char formats after you hit enter on a blank line; but if
you then hit enter again, after the block format has been reset, then
you will get the actual blank line (empty block) inserted.
[ChangeLog][QtWidgets][QTextEdit] Hitting enter at the end of a line
with a special block format (horizontal rule, heading, checklist item)
now makes some "smart" adjustments to avoid retaining properties that
are unlikely to be continued on the next line. Hitting enter twice now
resets block and char formats to default.
Fixes: QTBUG-48815
Task-number: QTBUG-80473
Fixes: QTBUG-97459
Change-Id: I3dfdd5b4c0d9ffb4673acc861cb7b5c22291df25
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
We need to check whether the horizontal header's selection includes the
index for the row at the top, rather than for row 0, as the index we
check is based on the scrolled position of the header, so would never be
included in the top row when the view is scrolled. This is correctly
done in selectRow already.
Add a test case that simulates selection of rows and columns by clicking
on the header.
Fixes: QTBUG-98444
Pick-to: 6.2
Change-Id: I2fa1b32bf75dc96225b40145b713bf7e2ffc29dd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The first sub window added will activate itself automatically, and
isActive is set to true. Therefore the call to setActiveSubWindow to
activate the first sub window will be ignored.
When showing the mdiarea, all sub windows will be activated in the order
in which they were added, so the active window will always be the last
sub window added.
Fix this by setting isActive to false so that setActiveSubWindow
activates the first sub window when the mdiarea becomes active.
Fixes: QTBUG-92037
Pick-to: 6.2
Change-Id: Id4a793e2059803c1a4ada916fdae2d3cc02cdf06
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We have some special handling in qt_windows.h,
use it instead of the original windows.h
Change-Id: I12fa45b09d3f2aad355573dce45861d7d28e1d77
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Don't crash if the font does not have any families set.
Pick-to: 6.2
Task-number: QTBUG-97995
Change-Id: I8dc2f2fc00309b6fff6d4a661ec6d659f30808af
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
If QFontComboBox is instantiated in the form of new and call
QFontDatabase::addApplicationFont, QFontComboBoxPrivate::_q_updateModel()
will be called when the program exits, at this time qApp will crash.
Fix this by when program exiting, QFontComboBoxPrivate don't need
call _q_updateModel().
Fixes: QTBUG-98099
Done-With: Konstantin Ritt <ritt.ks@gmail.com>
Pick-to: 5.15 6.2
Change-Id: I3df3d19c3d1971288d60f2eef386262befbf396b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
In paintAndFlush, QWidgetRepaintManager subtracts opaque children if
the target isn't overlapped and isMoved is set to true. So in moveRect,
set isMoved to true after the blitting of movable areas, and reset it to
false if we have overlapped sibling or child regions. Otherwise, moving
so far that sourceRect is invalid (none of the original pixels are
visible after the move) we end up in a code path that sets isMoved to
true even with overlapping children or siblings, which then breaks
paintAndFlush's assumptions.
Reuse the test case written by Sergiy Korobov <tiamatenko@gmail.com> in
earlier attempts to fix this bug.
Fixes: QTBUG-26269
Pick-to: 6.2
Change-Id: If7443863f5eee79a80220cd587522122f42a21e4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Since QMainWindow::setMenuWidget accepts a QWidget (allowing users to
implement their own menu widget), we need to use qobject_cast on the
stored widget to see if it is a QMenuBar before calling QMenuBar APIs.
This qobject_cast may return nullptr.
Pick-to: 6.2
Fixes: QTBUG-98247
Change-Id: Iff1dbd24fa7ca09098fe49c179770356c966251d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QTabBar implements wheelEvent to move the current index up or down. This
is useful for clicky mouse wheels, but a bad user experience when using
a kinetic wheel or touch pad, as every pixel movement will change the
current index.
Instead, scroll the entire tab bar when the wheel event comes from a
device that supports scroll phases, without changing the current index.
As drive-by's, fix the test introduced in aa09bea00c to
not leak memory or leave a test-specific style set on the QApplication
instance, which can break other tests.
Also, make relevant layout code in QTabBar respect the usesScrollButtons
property, const'ify local variables, and return an accepted QWheelEvent
if the event resulted in a change.
[ChangeLog][QtWidgets][QTabBar] Scrolling with a kinetic wheel or touch
pad scrolls the entire tab bar, without changing the current index.
Change-Id: I990e51466dd25c741877bbf0e197449f897a9efb
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The slider is very touch friendly from macOS 11 on, and the knob is quite
large. Give it some extra pixels, and adjust the test accordingly.
Pick-to: 6.2
Task-number: QTBUG-98093
Change-Id: Iedf6db1081cdd4013ca29ce760aea1e0361b1123
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Check that a file name, not the full path, contains a dot.
Fixes: QTBUG-59401
Pick-to: 5.15 6.2
Change-Id: I193b2ae457a3ac6a460524dbf200786eb3461cef
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
After special processing for hover, QPushButton::mouseMoveEvent()
needs to call the base class function, like every virtual override
should, to continue processing other logic. Amends
3310e13a17
Fixes: QTBUG-97937
Pick-to: 6.0 6.2
Change-Id: Ic2e111d6c38371e0aa04423f5fb26c52717bf5fb
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Relying on QCursor::pos makes tests fragile and prevents multi-seat support.
Instead, record the mouse position in the already existing event handling,
and use that instead. Styles might use either WA_Hover or enable mouse
tracking for the widget to enable hover-effects, so we need to support both.
Fix the scenario where a newly inserted tab ends up under the mouse, which
was previously not handled correctly (only the case of removing a tab was).
Clean up the repaint management when the hovered tab changes; just call
update on the old rect, and then later update on the new rect; there's no
need to make a copy first, updates are posted and compressed.
Add a unit test that makes sure that we paint tabs that should be under the
mouse in the hovered state. Since not all styles enable hovering and/or
mouse tracking in all cases, use a style sheet for those styles that don't.
Change-Id: I7cdbb18e9e04b52651e273680fec87b50cb81e05
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Amends 17c1ebf8bf, which introduced logic
that recognizes double clicks to avoid duplicate clicked() emits. If a
slot connected to doubleClicked opens a dialog, then the release-event
will not be seen by the item view, leaving the flag incorrectly set and
preventing the next clicked signal.
Fixes: QTBUG-97853
Pick-to: 6.2 5.15
Change-Id: Iced83e8c66a763672f522265435dc52a745227e4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Otherwise, the button state maintained by Qt when using the offscreen
plugin is not reset, breaking following tests.
Pick-to: 6.2
Task-number: QTBUG-97964
Change-Id: Ib37fd038e214863e1e316dc3d41e9d28c157b1f8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: David Skoland <david.skoland@qt.io>
QTest's simulation of mouse move events currently uses QCursor::setPos
and then processes events. This is unreliable across platforms.
This test relies on the event processing and either way has inverted
logic in the paint event; the painted region needs to at least include
the tab's rect, not the other way around. Also, the mouse move wasn't
needed here at all, and some styles don't have a different style for
pressed tabs anyway.
Pick-to: 6.2
Change-Id: Ib8f6f7be017ff87458e96ec419edcd065dd75b15
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Doris Verria <doris.verria@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Calculate effect bounds for the updated region when drawing the effect
so that the whole affected area gets updated. The effect bounds have
already been added to the region so it doesn't need to be handled in
the drawing function.
Pick-to: 6.2 5.15
Fixes: QTBUG-96240
Change-Id: I0c317311622e6299fb1a3015541408d1d83c93de
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QTabBar caches the rects for the tabs to avoid costly recalculation of
each tab's size hint. That cache is only updated via layoutTabs if the
entire tab bar is resized or modified. However, when a style sheet is
set that calculates a different size hint for tabs that are selected,
then the tab bar also needs to be laid-out when the current tab changes.
To minimize the cost, compare the cached size for the new current tab
with its new size hint, and re-layout the tabs when they are different.
Fixes: QTBUG-6905
Fixes: QTBUG-8209
Pick-to: 6.2
Change-Id: I110444d18938c2b3446ee58e4a8c6c472b5f12c3
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Menus can be represented by a menu action, and if that menu action has
been hidden or disabled, then the submenu is not accessible from the
parent menu or menu bar to which it was added. Don't walk the menu
action chain further when checking whether the shortcut should trigger.
Note that this is unrelated to the menu being visible or not; we
obviously want to trigger shortcuts for actions that only live in a menu
that has not been shown, otherwise the shortcut would be rather
pointless.
Pick-to: 6.2
Fixes: QTBUG-25743
Change-Id: I48735e17352989bbc84a72263e4828f519b78095
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Some item views, such as QListView in icon mode, implement a selection
rectangle with which the user can "lasso" items. So far, dragging that
rectangle did not trigger auto scroll, so unless an item near the edge
was selected, the user had to stop the lassoing and scroll manually to
reach more items.
Since QAbtractItemView implements auto scrolling for drag'n'drop, we can
use that mechanism also when the selection rectangle is dragged. This
requires some modifications:
We need to make sure that scrolling the view during a drag-selection
generates mouse move events so that the selection is extended and the
rectangle is updated in subclasses.
And we need to stop using QCursor::pos to get the position of the mouse
pointer, as this makes the auto-scrolling untestable. Instead, record
the mouse position last seen during a mouseMove or dragMoveEvent in
content-coordinates (identical to pressedPosition).
As a drive-by, fix some coding-style issues in nearby code.
Done-with: Zhang Hao <zhanghao@uniontech.com>
Fixes: QTBUG-96124
Change-Id: I426f786e5842ae9f9fb04e9d34dc6d3379a6207f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Instead of plumbing QWidgetWindow close events via handleCloseEvent,
we just implement closeEvent directly. This allows QWindow do save
the state of the window/widget before the close event, so that we
know whether we should trigger lastWindowClosed handling, even if
the window was deleted as a result of the close event.
This also relieves QGuiApplication and QApplication from dealing
with the close logic in their notify functions, so that these
functions can focus on the propagation of events -- not how the
event is handled.
Change-Id: I8b586b53a53b1df1d8630c1acb635c60f191bb4b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Amends 32edae5e26, which introduced a
timeout after which the restored state is discarded. If this timeout
hits during a CI run, then the test is expected to
fail.
Implement a lambda that watches for the restored state to disappear.
This happens primarily when restoring a fullscreen state, where some
desktop environments scroll in a new virtual desktop. It should not
happen for other data tags.
Change-Id: I5ff43a4e1857eca17a5d4fe2b47add1f70636e8d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
On systems that asynchronously resize the window to maximized or full
screen state, the window will become visible in its normal geometry
before it gets the final size by the windowing system. This might cause
multiple resize events, to each of which the widget's layout responds
with a call to its setGeometry implementation.
The QMainWindowLayout is special in that it will shrink dock widgets if
there is not enough space for them, but it doesn't grow them back once
there is. With the initial resize event being for a smaller size than
what was restored, the state is not restored correctly, but remains in
the state that fit into the smallest size with which setGeometry got
called.
To fix this, we have to keep the restored state around until the window
either gets a size that is large enough for it to fit, or until we can
be reasonably certain that the windowing system is done resizing the
window while transitioning it to the maximized or full screen state.
Since across the various platforms and windowing systems there is no
reliable way to know when the window reaches its final size, we have
to use a timer that we (re)start for each call to setGeometry with a
size that's not large enough. Once the timer times out, we have to
give up; then the last layout state calculated is the final state.
To calculate the size of the layout, introduce a function to the
QDockAreaLayout that returns the size required for the current sizes
of the docks. Refactor sizeHint and minimumSize (which were identical)
into a helper template that takes member-function pointers to call the
respective method from the dock area layout's content items.
Add a test case for various permutations of the scenario. The timeout
of 150ms is based on running this test case repeatedly on various
desktop platforms and X11 window managers.
Fixes: QTBUG-46620
Change-Id: I489675c2c40d3308ac8194aeb4267172b2fb38be
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Cocoa sends QWidget the state-change notification after the window has
been resized already, at which point we cannot store the normal geometry
anymore.
Handle zoom and full screen callbacks prior to the state changing
to store the geometry in QCocoaWindow. We do not need to handle
minimized state, as the window will still reflect the original
geometry.
Return the stored value from an override of
QPlatformWindow::normalGeometry so that QWidget gets the correct values
even though the new state is already active.
Fix the tst_QWidget::normalGeometry test to make it pass on all
platforms by waiting for the window to actually have transitioned to
the new state before comparing geometries. Both macOS and Windows fully
pass; on Xcb, deminimizing a window using setWindowState does not work,
which is why the test was partially skipped (confirmed by visual
testing). Move those problematic, complex test cases to the end so
that most cases are covered on Xcb as well.
Done-with: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Pick-to: 6.2
Change-Id: I518a5db9169b80e8fa25fe4fa2b50bd1ea0e6db3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Doing so results in bailing out early for a widget that hasn't been
shown yet, or otherwise resulted in creating extra and topextra,
which means the normalGeometry will not reflect the widget's geometry.
Pick-to: 6.2
Change-Id: Ieb85e9a6109ae34fe20d79e3c12f4517f827a590
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Since commit 7ba75d0 we close the QWindow in QWidget::close for native
widgets and trigger the closeEvent in QWidgetWindow. However, if the
widget's window handle is not a top level window, QWindow::close()
will not close the window, failing in this way to deliver the
closeEvent and call the close handling in QWidgetPrivate::handleClose.
To fix, call handleClose() from QWidget::close for such widgets.
Task-number: QTBUG-74606
Pick-to: 6.2
Change-Id: Ied342eced3340aaf19b5443762935b1a5fc5c27b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The signal is emitted from QGuiApplication these days.
Pick-to: 6.2
Change-Id: I7423cd4808e8df86960f225fd6e4a12a1a4f11f3
Reviewed-by: Doris Verria <doris.verria@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QAbstractScrollAreaPrivate::layoutChildren() positions the viewport, but
did not take the overshoot from scrolling with a scroller into account.
If the scroll area was resized during a scroll, then this resulted in the
roll back overcompensating for the overshoot, placing the viewport outside
the visible area.
Fix this by taking the overshoot into account when positioning the
viewport.
Add a test case. We have to use QWindow-based mouse event simulation, as
the QWidget based move events use QCursor::setPos, which doesn't reliably
go through the gesture framework.
Done-with: Volker Hilsheimer <volker.hilsheimer@qt.io>
Done-with: Zhang Hao <zhanghao@uniontech.com>
Fixes: QTBUG-94769
Pick-to: 5.15 6.2
Change-Id: Idf650c91e5a9cffa996e23e743939243b1d4fcc0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test passes, the functionality is implemented in QCocoaWindow.
Task-number: QTBUG-8857
Pick-to: 6.2
Change-Id: I2f4b3a39cec1aaaf4351753b590f35e280503461
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- when there is no intersection between the current selection and the
spans collection, get ranges for all cells, just as if no span exists
- when there is an intersection between the current selection and the
spans collection, get separate ranges for each cell (as before)
This fixes the regular case of selecting multiple non-spanned cells
after some cells are merged (get a single range for all cells instead of
separate range for each cell). However, when selecting together a group
of spanned and non-spanned cells, you still get a separate range for
each cell. But this is normal behavior in similar applications; for
example in LibreOffice, you cannot select and merge spanned and
non-spanned cells: an error dialog tells you that it's not allowed.
Done-with: Christos Kokkinidis
Pick-to: 6.2
Fixes: QTBUG-255
Change-Id: Ic38f9a064a1f499825e7f750668013fc2dc564ba
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add operators as hidden friends, add test case to make sure that
basic value-type operations are possible with this type.
Task-number: QTBUG-255
Change-Id: I7fbf453aa16084c0b2a0079487cacb4e092ff664
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The skip-reason only cites Qt/X11. Convert the #ifdef into a platform
name check instead. The test also fails with the offscreen plugin, so
skip it for that as well.
Pick-to: 6.2
Change-Id: I49607b89f4b32359e81e1d9aadff2c3e03035c53
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QDialog overrides setVisible to set focus on the default push button, or
(if there is no such button), make the first autoDefault push button the
default button. QDialog also explicitly sends a FocusIn event to the
focus widget in the dialog.
All this should not be done if the dialog does not become active after
getting shown, which will be prevented if the WA_ShowWithoutActivating
attribute is set.
Add a test case.
Fixes: QTBUG-8857
Pick-to: 6.2
Change-Id: If47021a4721a280ba45e95b43d0424cdacd9b4ea
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
For a widget that implements height-for-width, the vertical scrollbar
becoming visible might be just enough to make the scrollbar unnecessary.
In that situation, the scrollbar flips on and off continuously.
To avoid that situation, make the width of the widget smaller until the
height fits without scrollbar, up to the point where we have space for
the scrollbar anyway.
The calcuation here is assumed to be cheap, but depends on the
heightForWidth implementation in the widget. Running the while-loop a
few dozen times should have no performance impact during resizing
and laying out the scroll area contents.
Add a test that confirms that within a brief period of time we only get
the one hide-event we expect.
Done-with: Zou Ya <zouya@uniontech.com>
Fixes: QTBUG-92958
Pick-to: 6.2 5.15
Change-Id: I0faeb5f9b1a226aada958c18333d9c2ac8203dd1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When setCurrentIndex is called by removeTab, the old current index
might no longer be valid. Only update the lastTab value of the new
current tab if the old current index is still valid.
As a drive-by, use the validIndex helper function.
Fixes: QTBUG-94352
Pick-to: 6.2
Change-Id: I945e2093a90a1fccbba86d32b1113f83fedd41de
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
On a mobile device, selecting text in a line edit brings up the text
action popup for select/copy/cut. In a spinbox where the user changes the
value using the buttons, this can be very irritating, without providing
any usability - the user is unlikely to start typing, at least not
without first transferring focus into the lineedit first to bring up the
keyboard.
This style hint allows styles to override the default behavior of
QAbstractSpinBox. Implement the customization for the Android style, and
add a test case for QSpinBox.
[ChangeLog][QtWidgets][QStyle] A new style hint, SH_SpinBox_SelectOnStep,
specifies whether pressing the up/down buttons or keys in a spinbox will
automatically select the text.
Fixes: QTBUG-93366
Change-Id: If06365a7c62087a2213145e13119f56544ac33b5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
On macOS, when showing a window, we decide if it should be made
key and therefore active, if the app has no active modal session
or if the window's worksWhenModal returns true.
However, the window needs to be made key also when a modal window
is present, but not visible. Add this condition when checking if
the window needs to be made key.
This makes the behavior consistent with what happens when a modal
is minimized on macOS. The input focus is passed to the next window,
and the window appears active, even if it can not be interacted with.
Fixes: QTBUG-85574
Pick-to: 5.15 6.2
Change-Id: I204d4f912128f4a46840789fc2ee08e1b2716bfc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Closing a window with a native child results in the native child's
QWidgetWindow being closed. That explicitly calls setVisible(false)
on the child, which will still have the ExplicitShowHide attribute
set from the initial (explicit) show. Even though we then reset
the ExplicitShowHide, the WState_Hidden attribute will still be
set, so Qt considers the window to have been hidden, and not show
it again when the parent becomes visible.
Add a test case.
Fixes: QTBUG-96286
Fixes: QTBUG-79012
Fixes: QTBUG-71519
Change-Id: I482e6d5236c959d82ce66798176b259a3176972c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Remove dead code
Make logic to position test widgets more consistent across test functions
Consistent cursor positioning logic
Get rid of unnecessary event processing
Reduce calls to qWait with hard coded values
Use qWaitFor to establish asynchronous preconditions
Ignore expected warning messages
Expect-fail (instead of blacklist or skip) some tests that always fail
Ignore unpredictable events in childEvents test
Split large "render" test in multiple test functions
Task-number: QTBUG-52974
Task-number: QTBUG-26424
Change-Id: I206e114c2c1d9801e08600d3341c2738dc881f17
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Item views can open an editor widget on the first key press, and need to
take special care not to break input methods. The initial key press
starts compositing by the system input method, which is then interrupted
by the focus transfer to the editor.
To solve this problem, the widget needs to keep focus while the initial
composition is ongoing, and only transfer focus to the editor once the
composition is either accepted or cancelled by the user. Add a state flag
that is set during this initial preedit phase.
During this initial composition, the item view will receive all input
method events, and needs to forward these to the open, but not yet focused
editor for the user to get the correct visual feedback during the preedit
phase. The item view also needs to report to input method queries on
behalf of the editor to make sure that the IM UI is correctly positioned
without covering the user input.
Implement a test that simulates the sequences through synthesized
QInputMethodEvents; we can't simulate the entire system input stack.
Fixes: QTBUG-54848
Change-Id: Ief3fe349f9d7542949032905c7f9ca2beb197611
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
At the current state, Qt::WA_StaticContents is not respected on any
platform, and optimizations for opaque widgets is not implemented on
Cocoa.
Task-number: QTBUG-73117
Change-Id: I48b7b0c4436da5a609fdbe51bb1c9789a2a059bd
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QWidget::setParent might be called to change the window flags, without
changing the parent. For those cases, we don't have to clear the focus.
Decouple the newParent state from the wasCreated flag. In most places
where newParent was tested, wasCreated was either tested previously and
can't be false anyway, or the code executed is irrelevant for widgets
that are not yet created (there can't be a paint manager). In the
remaining case, test wasCreated explicitly to maintain existing logic.
Add test for the cases where the previous code broke the focus, both
for QWidget and QDialog.
Fixes: QTBUG-93005
Pick-to: 6.2
Change-Id: I39dc179c2d348054de3927aa8b69eecef4935511
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Doris Verria <doris.verria@qt.io>
The Cocoa QPA plugin no longer tracks popups, but dispatches enter/leave
events when popups show and hide. So the special handling in tests and
QWidgetWindow can go away now.
Change-Id: Ib6ef00689de231996e5e57ecdd8fd0d4c861d68b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since macOS doesn't give us any event when a modal window opens,
we need to do so ourselves explicitly so that the current mouse
window gets a leave event when e.g. a popup opens, and an enter
event when the popup closes again. The case for modal dialogs is
partially handled by QGuiApplication already.
Note: We cannot rely on the transientParent of the opening/closing
window, as it's nullptr for QMenu windows even if the QMenu has
a widget parent.
Add a test for enter/leave events when a secondary window opens,
covering both the dialog and the popup case. For the dialog case,
we sometimes get two Enter events when the dailog closes, which
we have to tolerate for now.
To make the test pass on b2qt platforms, fix the offscreen plugin
to explicitly send enter/leave events in the same way as Cocoa
now does.
Fixes: QTBUG-78970
Pick-to: 6.2
Change-Id: If45e43e625e8362c3502c740154f6a6a8962b9e9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Showing, hiding, and showing a window can result in the Xcb QPA plugin
warning about
qt.qpa.xcb: internal error: void QXcbWindow::setNetWmStateOnUnmappedWindow()
called on mapped window
The point of the test is to verify that we get a paint event on a window
that is shown again after having been hidden, not to verify that async
windowing systems can handle a show/hide/show sequence. So wait for the
window being exposed before we hide it.
Pick-to: 6.2 5.15
Change-Id: If91a9926613645e78e332dacff34bd57e4034b6f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test passes consistently in local test runs on macOS 10.15.
Change-Id: I6f05b27d3cbf930475a435c41db267a00b1726b0
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It is no longer handled separately from Android.
This effectively reverts commit 6d50f746fe
Change-Id: Ic2d75b8c5a09895810913311ab2fe3355d4d2983
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
By going via QWidget::close() we ensure that if there's a QWidgetWindow
backing the dialog (which is almost always the case), we will plumb down
to QWindow::close(), resulting in QEvent::Close events to the QWindow.
Since we don't want QDialog subclasses to receive a call to a closeEvent
override that they didn't receive before (and which they might interpret
as rejection or cancellation), install a temporary event filter that
eats the QCloseEvent resulting from the call to close().
Task-number: QTBUG-53286
Change-Id: Ie8f6f0cb3160acfd5865dc74f0a7b6d87f838724
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Move the status setting and resetting back into handleClose so that we
don't end up with it being set if handleClose is never called in response
to a close attempt. This can happen when QWindow's platform window has
already been destroyed.
Since QWindow::close handles that case gracefully and returns true,
we can safely call it multiple times.
Add test coverage to verify that we get exactly those close event
calls that we want.
Change-Id: Ica77bf17c26d923c3b79b1e5a688addbc88a6277
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test was failing because it didn't account for the platform behavior.
Task-number: QTBUG-30040
Pick-to: 6.2
Change-Id: I7c523c06f0bfa459c1532cee721718bebc1858c4
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The system behavior is to not show these kinds of dialogs as modal,
and we've documented that for QMessageBox.
However, calling show() instead of exec() is not enough, as the
default constructor of QMessageBox will set the modality of the
widget to application-modal. We need to explicitly override this.
[ChangLog][macOS] QMessageBox::about(Qt) now shows dialog non-modal,
as documented.
Pick-to: 6.2
Change-Id: I6bb59efb81feb23122276a9eede71b2f20c9d7c6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This reapplies the fix from 1ecf2212fa,
using QApplication::translateRawTouchEvent to dispatch the touch event
received by the QGraphicsProxyWidget to the relevant child widgets
under each touch point.
In addition, limit the implicit grabbing of each touch point before
sending the event to those cases where we have to: touch pads, and
if the target widget comes from a closest-widget matching. And don't
call the QTouchEvent override of QEvent::setAccepted() on QTouchEvent
instances in QGraphicsView classes, as this will override each event
point's acceptance state.
This way, we can identify which touch points have been accepted after
event delivery, any only implicitly grab those points that were.
Otherwise, touch points not accepted by a proxied widget hierarchy
will still be part of an accepted event, and be grabbed by the
viewport of the QGraphicsView. This would then lead to infinite
recursion when the QGraphicsProxyWidget passes the TouchUpdate event
on to each touch point's grabber.
Re-activate the test case, and extend it with more combinations.
Refactor touch-event recording to make it easier to test multi-touch
scenarios.
Task-number: QTBUG-45737
Fixes: QTBUG-67819
Pick-to: 6.2
Change-Id: Id5611f4feecb43b9367d9c2c71ad863b117efbcb
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
