As an option. Must opt in via setting ExternalContentsInPass in
the flags for beginFrame(). It is somewhat unfortunate to require
declaring this up front, but forcing using secondary command buffers
always, even though beginExternal() may not be used in many applications,
would be an overkill.
Change-Id: I8d52bcab40c96f89f140c4c7877b6c459925e3c7
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This test displays a summary of relevant DPI and scale
factor/devicePixelRatio values:
- DPI and DPR as seen by the application
- Input from QPlatformScreen
- Input from environment variables.
Task-number: QTBUG-53022
Change-Id: I340391624b202e342f22902ffbd7228fe7fbe94b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Remove pixelScale() in favor of logicalBaseDpi(). Compute scale factor
based on logical DPI and logical base DPI, or optionally based on the
physical DPI.
Add policies for running the scale factor and adjusting the logical
DPI reported to the application. The policies are set via environment
variables:
QT_SCALE_FACTOR_ROUNDING_POLICY=Round|Ceil|Floor|RoundPreferFloor|PassThrough
QT_DPI_ADJUSTMENT_POLICY=AdjustDpi|DontAdjustDpi|AdjustUpOnly
QT_USE_PHYSICAL_DPI=0|1
Done-with: Friedemann Kleint <Friedemann.Kleint@qt.io>
Task-number: QTBUG-53022
Change-Id: I4846f223186df665eb0a9c827eaef0a96d1f458f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The benefit of keeping this code around was to inspire or inform
changes in the areas to take into account possibly missing features
in Qt 5, but at this point that benefit is questionable. We can
always use the history to learn about missing pieces if needed.
Change-Id: I87a02dc451e9027be9b97554427bf8a1c6b2c025
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This adds a manual test for the QTextTable border logic.
Two HTML files are bundled as resources:
table-border-test.html: Contains various test cases for the border
logic.
table-border-test-header.html: Contains a test case for printing a table
with a repeated header.
The test application allows:
- editing
- previewing
- printing
- opening the HTML in the system browser (via temp. file)
It is possible to edit the HTML with "live preview" so new test cases
can easily be implemented.
Change-Id: Ic88488bc8b7dd74d5c03c3363f55840423462325
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
- No need to use QSignalMapper here, replace its uses with lambdas.
- Replace index 'for' loop with iterator loop, to simplify the code.
Change-Id: Ide3d2db99a074c0233eb5c2fd7a9b217d804973f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Leftover from the migration to QColor as color clear value.
Change-Id: Ibf49d65234a1e14d53035b46249753a5929ca22b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The Quick render loops do SkipPresent occasionally, and it all seemed
to work with the threaded one because we lack an autorelease pool on
the SG render thread. (to be corrected separately) The basic one ended
up crashing sometimes, however. Holding on to the drawable is incorrect.
Fixes: QTBUG-76953
Change-Id: I0d0ec6d09aa209d2c848d7a9dbd9b15916fe23ab
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
- Replaced the usages of deprecated APIs by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Change-Id: Ic38245015377fc0c8127eb5458c184ffd4b450f1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Simplistic console application with one test for each of the two
classes. Simply tests that we receive the signal when the connection
is disrupted in some way.
This patch also exports the classes for tests/developer builds
so that we can actually link with them.
Change-Id: I8066312274350984110c3f3ad3e94854adca7c2a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Replaced the usages of deprecated APIs of corelib by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Task-number: QTBUG-76491
Task-number: QTBUG-76539
Task-number: QTBUG-76541
Change-Id: I62ed4a5b530a965ec3f6502c6480808f938921aa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Have feature flags as appropriate. OpenGL is causing a mess here
but let's support what we can since some of this will become relevant
in more sophisticated mesh drawing cases with 3D in particular.
Change-Id: Idfa7b4642ec87147978e03d78d6233efbd151491
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Draws 1024 cubes at random x,y positions with varying color with
a single instanced draw call.
Change-Id: I8737503acf23866ad4734b1d88753415a3b93445
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
...but this will vary between backends, or in some cases
even between implementations of the same API.
Point size is settable only via the vertex shader (gl_PointSize).
It is silently ignored with D3D and HLSL.
Line widths other than 1 are supported only on OpenGL and Vulkan.
(but this is in fact deprecated with GL and optional with Vulkan)
Add QRhi::Feature values for both.
The line width is now settable on QRhiGraphicsPipeline. It is not a
dynamic state since the static, per-pipeline width is good enough for
most cases. (and the feature is not supported on half of the backends
anyways so it will get limited use in practice).
Change-Id: I6d3a32269527c452b794b2cb8b0f03101eab40b2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Fix most clang warnings about override, nullptr, range-based for loops.
Change-Id: Id47e57adb63a38e2f397a31511b788a2432c97cf
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
D3D11 and GL (4.3+, ES 3.1+) will come separately at a
later time.
Change-Id: If30f2f3d062fa27e57e9912674669225b82a7b93
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: I0bb1d1409cb0c8f38b7582bb5ce6bbc2b047b6fc
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The class used the default debug operator for QObject, which outputs
the object's address. This makes it hard to compare the log output.
Make the existing QObject formatting helper from the EventFilter
publicly usable by providing a helper with a stream operator.
Change-Id: Ifab83e23cc792a5efe231fd9ae84e0439ab0d609
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
...and other slight modernizations and minor fixes.
Change-Id: Ide587d9fe59ca9113ae775882c99a50debaf9000
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Comes with backends for Vulkan, Metal, Direct3D 11.1, and OpenGL (ES).
All APIs are private for now.
Shader conditioning (i.e. generating a QRhiShader in memory or on disk
from some shader source code) is done via the tools and APIs provided
by qt-labs/qtshadertools.
The OpenGL support follows the cross-platform tradition of requiring
ES 2.0 only, while optionally using some (ES) 3.x features. It can
operate in core profile contexts as well.
Task-number: QTBUG-70287
Change-Id: I246f2e36d562e404012c05db2aa72487108aa7cc
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Set AA_UseHighDpiPixmaps.
Task-number: QTBUG-52622
Change-Id: Ic4373a9c94952f50bc1ad36bcc0dec850efc124a
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When the toolbar was moved from one position to another it could end up
increasing the size of the saveState data due to extra lines. This
removes any needless ones that should not be included.
Change-Id: I1c5d094ae1405d6a82db5fcdc3cd081904706837
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Fix QOverload<void>::of(), causing
../../../../include/QtCore/../../src/corelib/global/qglobal.h: In instantiation of ‘struct QConstOverload<void>’:
Q_DECL_CONSTEXPR auto operator()(R (T::*ptr)(Args...) const) const Q_DECL_NOTHROW -> decltype(ptr)
and add a missing .pro-file.
Change-Id: I19597adc33f2323a9f7dea9ee5ce94546f0e8f12
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Fix:
gestures.cpp:46:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
gestures.cpp:47:5: note: here
gestures.cpp:48:9: warning: this statement may fall through [-Wimplicit-fallthrough=]
gestures.cpp:52:5: note: here
main.cpp: In function 'QByteArray windowsVersionToString(QSysInfo::WinVersion)':
main.cpp:40:12: warning: enumeration value 'WV_CE' not handled in switch [-Wswitch]
...
main.cpp: In function 'QByteArray macVersionToString(QSysInfo::MacVersion)':
main.cpp:68:12: warning: enumeration value 'MV_10_12' not handled in switch [-Wswitch]
...
widget.cpp: In member function 'CustomItem* Widget::checkedItem() const':
widget.cpp:238:12: warning: 'item' may be used uninitialized in this function [-Wmaybe-uninitialized]
Change-Id: I434784e86d127e56b92663cb45eba7d60d8f8eaf
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Mark some long obsolete functions as deprecated so the can be removed
with Qt6:
- QDialog::setOrientation()/orientation()
- QDialog::setExtension()/extension()/showExtension()
- QFileDialog::setNameFilterDetailsVisible()/isNameFilterDetailsVisible()
- QFileDialog::setResolveSymlinks()/resolveSymlinks()
Change-Id: Ibbd5b4192ea8ab483d6b2a8dbf9879f29f9ee86d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Some of the spdy/3 tests don't pass anymore because those services
no longer support spdy/3. Solve this by updating it to HTTP/2 (h2).
Change-Id: Ib3ef6109b75f4298fed15c1c7922deca35459df9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Also blacklist tst_QRawFont::unsupportedWritingSystem() and
tst_QGlyphRun::mixedScripts() on windows for now.
Conflicts:
qmake/generators/makefile.cpp
src/corelib/itemmodels/qstringlistmodel.cpp
src/platformsupport/fontdatabases/windows/qwindowsfontengine_p.h
tests/auto/corelib/itemmodels/qstringlistmodel/tst_qstringlistmodel.cpp
tests/auto/gui/text/qglyphrun/BLACKLIST
tests/auto/gui/text/qrawfont/BLACKLIST
Task-number: QTBUG-72836
Change-Id: I10fea1493f0ae1a5708e1e48d0a4d7d6b76258b9
The grayscale font-smoothing doesn't expect to be linearly blended,
as first assumed.
Amended nativetext manual test to better diagnose the native Core
Text behavior. Non-linear blending will result in the magenta
text having a dark outline against the green background.
Change-Id: I24a5f04eb1bd66fb98d621078d80ee9b80800827
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The Qt and CoreText positioning is now in sync.
Change-Id: I0cbb5b150d1bef732674b8d42c64a040773a62ab
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
