It's needed by androiddeployqt tool to run "zipalign" tool
and to set it to gradle properties.
Task-number:QTBUG-40481
Change-Id: I3dd665a7461a4e981867cdad75a50940e46a5ae6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Now that we rely on simd.prf for all SIMD sources (including NEON and SSE2),
we need to ensure that CONFIG has the right SIMD values to match simulator.
This worked before due to us checking QT_CPU_FEATURES.$$QT_ARCH and adding
directly to SOURCES.
Change-Id: I4ea7f559e83860eabff1948ad5d140bbb65454df
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
when doing a module-by-module build, we need to also use includes and
libraries from the install tree, as it contains the current module's
dependencies. but a pre-existing installation of the current module must
not be found first, as it would cause trouble latest when it was somehow
incompatible.
but purely topological sorting of the dependencies could cause the
locations to be mixed up. therefore we give modules which are part of
the current build a priority boost.
Change-Id: I8fdbb46f0a2a630781c8a2177468039c1122151a
Reviewed-by: Giulio Camuffo <giulio.camuffo@jollamobile.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
For multi-pass RCC qmake generates broken VS project files, because
the RCC extra compiler directly calls the C++ compiler on a generated
source file. Adding this call to a VS project file will bypass any
project settings. Also, the VS project generator is not prepared to
add extra compilers that generate object files.
Task-number: QTBUG-39685
Change-Id: I1bcaad8936be8371d596f29ed8952888ba95f7b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This was a long-time coming.
One innovation from this commit is that it will add the source to
SOURCES if the compiler is already generating code for that specific
target. That is currently always the case for Neon, and the MIPS DSPs
since that is the only condition in which configure will enable those
targets. And because of qt_module.prf, it's also always the case for
SSE2 (but not for SSE3 or higher).
So simplify the .pri files by removing always-true conditions.
Change-Id: Ib24af74717b652c9a6be246e3c17a839470f37da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>
We don't actually detect whether the compiler can create Neon code or
provides Neon intrinsics. Most of them do, so that test would be mostly
moot. We removed the detection previously because we couldn't
automatically enable Neon due to leakage of instructions outside the
areas protected at runtime.
Instead, we rely on the mkspec properly passing the necessary flags that
enable Neon support.
This commit does not change that. All it does is verify whether the arch
detection found "neon" as part of the target CPU features. In other
words, it moves the test that was in simd.prf to configure.
It does fix the Neon detection in configure.exe, which was always
failing for trying to run a test that didn't exist
(config.tests/unix/neon).
Change-Id: Id561dfb2db7d3dca7b8c29afef63181693bdc0aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This patch adds the feature use_gold_linker to use the gold linker that
has been part of of GNU binutils since 2008. Gold links C++ libraries
much faster and use less memory.
The feature is autodetected when building Qt on Linux, but can be disabled
in configure. On MingW builds it is default off but can be enabled for
cross builds.
Change-Id: Icdd6ba2e706b2c791bcf44b6e718c2b7a5eb2218
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We don't have a way to rename main() inside a LLVM bit-code file yet, so we
error out if we detect that LTO is enabled (which causes object files to be
written as LLVM bit-code), and inform the user about a workaround.
Task-number: QTBUG-40184
Change-Id: I89c927a3a7f075c65e54442c4f7e6bb25175b6f7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
GCC currently requires fat object files for static libraries, since the
linker would otherwise not load the .o file from the archive at all and
the linking would fail with a lot of undefined references. Clang on
Linux also needs this, but it has no equivalent flag, so enabling LTCG
for Clang on static libraries will result in linker error.
This commit does not add support for enabling it in configure. It can be
enabled on a per-project basis by doing CONFIG += ltcg or by passing
-config ltcg to qmake's command-line.
Change-Id: I52cf99f1ed9f1701e23a3b457ba3502fd28126ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
currently there isn't a clean solution yet to support object files
or architecture specific files during the preprocess step when
using the xcode generator.
This fixes ios resources (but will break with large resources).
Task-number: QTBUG-39835
Change-Id: If620ab0c3b5c1f92db8f7b4740061c807730db57
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Most compilers out in the wild still don't support the flag, so we need
to compare the version number anyway. This also makes it ready for
whenever compilers start supporting -std=c++14, something we should fix
for C++11 too.
It overrides the CXX11 variable for two reasons:
1) we reuse the mechanics in c++11.prf
2) we avoid c++11.prf overriding the flag if qmake decides to process
it later (CONFIG += c++14 is additive)
Change-Id: I79b6523fd9017483f2474634d1c09f2fd5ea039d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We have to escape the target name to avoid compilation errors.
This fixes the compilation failure in the qprocess autotest.
[ChangeLog][Android] Added support for building libraries with
spaces in name.
Change-Id: Ib98ba261fb3a4cc1e835d0cd2f93aac6855a7c21
Reviewed-by: BogDan Vatra <bogdan@kde.org>
MSVC 2013 implements the behavior mandated by C++11 that removes the
ability to downconvert a string literal to a modifiable char*, but it's
not enabled by default. This option turns it on.
It's only enabled for release builds because the compiler page has a note
saying the Standard Library has bugs that prevent it from working in
debug mode. See http://msdn.microsoft.com/en-us/library/dn449508.aspx
Visual Studio "14" has this fixed.
[ChangeLog][Compiler Specific Changes] Release builds with Microsoft
Visual Studio 2013 now enable the standard-conforming C and C++ strict
string behavior. This option will be enabled in all builds with future
Visual Studio versions. Non-conforming code should be fixed for maximum
portability and correctness. See
http://msdn.microsoft.com/en-us/library/dn449508.aspx for more
information.
Change-Id: If5ba6cc8456209b268e047d1010710fe332b8312
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The integrated assembler of clang does not understand some/all of the
ARM macro assembler syntax used in pixman-arm-neon-asm.S. By default,
this integrated assembler is used when using the "clang" command as a
driver. This patch turns off the integrated assembler of clang for that
file.
Change-Id: Ic06801266b5a4b097ca835d815bcc5d5fc672946
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When LTCG/LTO is enabled, the link-time compilation will not use the
data in the object file, but instead the precompiled data in a separate
section, which is still blank and may not be recognizable by rcc's
second pass. That would result in all resource data being nulls -- and
the best case scenario out of that is that QResource concludes that
there is no resource (it could be worse).
That happens with GCC 4.8's GIMPLE intermediate format: a fat .o file
containing GIMPLE would be modified by rcc but GCC would not use the
modified data at the link stage, whereas a non-fat .o file would not be
recognized at all by rcc and the compilation would abort.
Change-Id: I78ccbfd77ceaa723f22a4f82b5b4d6536a80d65d
Reviewed-by: hjk <hjk121@nokiamail.com>
Unlike MSVC, ICC is capable of selecting each of the processor feature
levels, so let's define the right macros.
Version 9.1 is really old and not supported, so we don't need to keep
the old workaround.
The compiler has been complaining that option -GX is deprecated and will
be removed, so update it to use the same as MSVC does.
Change-Id: I4158fcf2331c1d27462bb1cb19725c7136efab4a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
mkspecs/qnx-x86-qcc/qplatformdefs.h
src/corelib/global/qglobal.h
src/network/socket/qnativesocketengine_winrt.cpp
src/plugins/platforms/android/androidjniaccessibility.cpp
src/plugins/platforms/windows/qwindowswindow.cpp
Manually adjusted:
mkspecs/qnx-armle-v7-qcc/qplatformdefs.h
to include 9ce697f2d5
Thanks goes to Sergio for the qnx mkspecs adjustments.
Change-Id: I53b1fd6bc5bc884e5ee2c2b84975f58171a1cb8e
This is essentially an opt-out using CONFIG += resources_small for the
'big-data' feature introduced and made mandatory with commit 5395180.
This is currently not active in any configuration, but can be used
when the two-pass approach is neither needed nor wanted.
Change-Id: I6d4f663843e629da6f39ac4da5e77d39c58b3ddf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ICC does support C++11, but the Apple headers contain invalid code that
Clang seems to accept. In C++11 mode, code using CF_ENUM expands to:
typedef enum EnumName : CFIndex EnumName; enum EnumName {
Which is valid Objective C++, but not valid C++.
Bug reports to Intel and to Apple are pending.
Discussed-on: https://groups.google.com/a/isocpp.org/d/msg/std-discussion/yDfkDo6C0BM/EVWzwjVbyh4J
Change-Id: I7d501e94212a90f5c7197a3b56016dadac2c44ad
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It somehow forgets the dot and thus can't open any moc or uic includes.
Intel bug: DPD200357915
Change-Id: I610ba4d3df0072bfb83f90347d94f4586d0d8c86
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The Intel compiler does support C++11 options on the command-line.
configure.exe will correctly try to run it, but the test would fail for
incorrect reasons.
First, we need to pass the option -Qstd=c++11 to enable it.
Second, on Windows, the GCC experimental define isn't defined, nor is
__cplusplus updated yet. So we have to rely on the Intel-specific macro.
Third, we need CONFIG += console so that the application succeeds in
linking against a main() function, as opposed to a WinMain one.
Change-Id: I8f3252189df4f8854a9d9aa2cd919c288d2df420
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The -xXXXX options are deprecated, so use the GCC-style -mXXX options.
Change-Id: I235c73c4a170003b5b5e20bd4c4c7125107f7f82
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
x86 doesn't care about alignment, and on all other platforms where it
does something it causes build errors, so instead of removing it on
those platforms just don't enable it at all.
Change-Id: Idfeb387099b28af60ba161b6ca678b7c9df17fe1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Revert cb09e1e889 for MinGW. gcc on Windows reproducably crashes
when the pre-compiled header becomes big enough ...
Change-Id: Icd5a3dfbe59f5ff5c78832e7b4436d0f1cfa1031
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
For static builds of Qt Quick apps, qmake generates a qml_plugin_import.cpp
file. Just like the Makefiles, it should be removed only for distclean,
not in the clean step. This is what we do for non-qml plugins, too.
Change-Id: I5a3f2e7d27c3ffd5161162a8a03e4dd9c9245af5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Webkit has a different layout, so allow the tests to be found in
the appropriate location.
Change-Id: Iedbea6daada98a3c3efdbcfc1fe4df5d2c8cea6a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Private qtwayland headers were not installed at first build, since
qmake was ignoring unexisting files from the install target. It
required another run of qmake to have a proper Makefile generated.
The rules for generated headers need CONFIG = no_check_exist, so that
files get listed in the Makefile even if they do not exist yet (thanks
to Loïc Yhuel for the pointer).
Change-Id: I1a0278d629295a55a3ddcf5f8fb068a04ba5be47
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
When qtbase has been compiled with PCH and trying to compile the
disassembler in QtDeclarative creating the PCH for "C" is failing
due the C++ includes. Guard the includes with __cplusplus to be
"usable" on C code. This guard is proposed for the "stable.h" in
the qmake precompiledheaders documentation.
Change-Id: I7a8fb9e59c666a2e1535d988fd71c5cd67d0587d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the no_dll switch has questionable semantics: it pro-actively breaks
non-dll builds. therefore its usage needs to be limited to dll build.
Task-number: QTBUG-39594
Change-Id: I98328e502693df835af565b5ec25ada2c1c168ad
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Traditionally, RCC in "C mode" was meant to bundle small resources into
a binary, like help texts or an occasional icon. RCC produces a .cpp
file containing the actual data in a char array which is then passed
to the compiler and linker as a normal source file. Larger resources
should be compiled in RCC's binary mode and loaded at run time.
Current Qt Quick use tries to deploy large hunks of data in "C mode",
causing heavy compiler/system load.
This patch works around the issue by splitting the process into
three parts:
1. Create a C++ skeleton, as usual, but use a placeholder array
with "easily compilable" (mostly NULs) data instead.
2. Compile the skeleton file.
3. Replace the placeholder data with the real binary data.
time (qmake5 ; make clean ; make) takes 1.3 s real time for a
100 MB resource here, and there is still room for improving patching
performance if really needed.
Change-Id: I10a1645fd86a95a7d5663c89e19b05cb3b43ed1b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
QNX 6.5 does not have readdir64_r, which is selected by current
qplatformdefs.h. There is only a reentrant version (readdir_r) which
does not support large files and a large file version (readdir64) which
is not reentrant. The reentrant version (readdir_r) will be chosen now.
In summary, the following versions will be used:
QNX 6.5: readdir_r (postfix '_r': reentrant version)
QNX 6.6: _readdir_r (prefix '_' : extra stat info included)
BB 10: _readdir64_r (infix '64': large file support)
Change-Id: I00739f0e2054a32f52555309d03463a6c52e3d99
Reviewed-by: Wolfgang Bremer <wbremer@blackberry.com>
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
qml2 needs QML2_IMPORT_PATH.
this didn't affect non-prefix builds (which most developers use), so
it wasn't too serious.
Change-Id: I435dca151348669b66f091f9a9324cd69394284e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
a) qmlimportscanner has no built-in -importPath, so it can't be omitted
even for non-prefix builds, and b) the QMLPATHS variable is also used
further down, so we can't just do away with it.
amends a658fa40.
Change-Id: I42a47a82fe13694fbac3c4a3962ebbe1d7e7865b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
it helps enormously to use the flag correctly.
amends f0c34eb08f.
Change-Id: I04a63cc59e133169d9f6677f2f88ef98fd5c524c
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qdoc uses the indexes as "precompiled headers" to obtain type info
necessary to properly parse sources.
the indexes needed are the ones the module actually depends on
(publically).
Change-Id: I6aad0b511d2534d584f7947c8d800300eede94ff
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
the doc/ dirs in the build dir won't be created until the docs have been
built, so of course checking whether they are there during the qmake
phase is counterproductive.
this also means that we'll get some complaints about non-existing
directories (for repos that don't create any docs). there is no
reasonable way to query qmake which repos are affected, and writing
shell-specific code to query it at make time seems a bit overengineered.
Task-number: QTBUG-38862
Change-Id: Ie0588e75bfc39718fffd46f0df6785428e396eb2
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
even if we are not doing a top-level build, we still need to specify an
index dir. that may be the install dir or the qtbase build dir,
depending on whether we are building against an installed prefix build
or a non-prefix build (building against non-installed prefix builds
outside a top-level build is inherently impossible).
Task-number: QTBUG-35596
Change-Id: Ia37d429855480d3bfe36b7ee29e087029861bfc5
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead of adding all possible plugin paths (for which QMAKEMODULES
wouldn't have been a reliable source anyway), only add the paths of
plugins of the necessary types.
this necessitates that we create qt_plugin_<foo>.pri files also in shared
builds of qt when making a prefix build. we don't install them unless it's
a static build, though.
Change-Id: Ib56b009562a7131d4dc4dfc259b34ec6581b0f77
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Makes it possible to use "android-extra-plugins" from qmake through the
ANDROID_EXTRA_PLUGINS variable.
Change-Id: I7c67e9f104e5397e094afff730efccb91949caa2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
CRT dependencies should contain "Phone" in the name.
Change-Id: I1b0de01df6a016c20b59232f6068e9bb87e3f18c
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
a162a3cb (Android: Add "unversioned_libname" configuration, 2014-04-23)
removed the version for shared libs on Android. This change updates
the generated CMake files to support that.
Change-Id: Ia6ef04872c664bd4c31546456a82730babed2910
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
We don't use it and it was never documented. Search engine hits
only point to this occurrence in the Qt sources.
Change-Id: I2dd7adc5438893560daf01ac85620d9f9c028982
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We'll use the master depends header for the module as the precompilation
header. We could use the master include, but tests show that
precompilation benefits taper off for big precompiled headers. The
important part is to get the Standard Library headers precompiled.
Each module can still override which header to precompile by setting
PRECOMPILED_HEADER after load(qt_modules). It can also turn off
precompiled headers by setting that to empty or by CONFIG -=
precompile_header.
Testing a few build times shows the following improvements (GCC 4.8 with
-O3 and C++11):
QtPrintSupport: 14.7%
QtOpenGL: 22.7%
QtDBus: 29.5%
QtSvg: -2.4%
QtXmlPatterns: 26.1%
QtQml: 21.6%
QtQuick: 25.0%
QtMultimedia: 9.0%
QtSerialPort: -30.0%
QtHelp: 5.6%
The numbers also show that precompilation is worse for small modules.
Change-Id: I3793fafcedaff5456527cd6b3777ffd162975c36
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The _HAS_EXCEPTIONS=0 define that was introduced in commit
f59083636b leads to lots of C4275
warnings:
non dll-interface class "stdext::exception" used as base for dll-interface class "std::bad_cast"
from the <algorithm> include in qglobal.h.
Newer versions of MSVC do not have this problem.
Task-number: QTBUG-39126
Change-Id: Ieea5adde649fe16e6b41fbbb23fd582b3bb12b89
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
the location of the import paths have changed a long time ago.
also, we can make use of QTREPOS now.
Change-Id: Iee50854b7441968c3c60538e54d9312e53d39cb6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
now that we have QTREPOS, we can use that directly instead of collecting
the QT.<foo>.qml dirs. as a "side effect", this makes qml modules without
a corresponding c++ module available to the scan.
Change-Id: I6f172121588ec01c9fa47a99d9990bf9fcfbc69f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we need to store commands with system path separators in the .pri files,
as we might clobber windows command arguments if we just converted
separators later on. and we can actually do that, as the path separators
are actually bound to the host system, not the shell.
we also need to shell-quote the commands, as whitespace, and more
commonly windows path separators in an msys shell, would break things.
we delay this to the last moment possible, as it does depend on the
shell.
Change-Id: I1fe6b63aebd5663b72492c32928ec397f86e336f
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
The linker complains that some symbols were compiled with different visibility
settings when linking host_build tools such as the import scanner. As it turns
out, we do CONFIG += hide_symbols for static libraries (such as bootstrap or
qmldevtools) but naturally not for the final program source code. It appears
symbol visibility is not of importance for static libraries in host builds (as
opposed to static libraries later linked into shared libraries), therefore this
patch removes that.
Change-Id: I237a2d8669374eb059dc91b5378f6e3ec93d67a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If the prefix isn't "m2" for the 2013 namespace, Visual Studio Update 2
won't open the document in the designer view. Even though there is
nothing technically wrong with the way it's currently done, change it to
"m2" to keep VS happy.
Change-Id: I62721114610de5396eb507828b39db89c1e96b1a
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Tweak qmake, add mkspecs for emulator and device, adjust the
manifest template for WP8.1, and add missing icons.
Change-Id: I7a6405fa85297ae4cc8522015274e65fb7a315a6
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
of course all helper libraries are built statically, so the criterion is
not useful. what is interesting is whether the whole qt configuration is
static, as that determines what will happen with the helper library when
linking the final "actual" artifacts.
Change-Id: I96980c645cb478b2f7a30688b49cb51bec8c9f08
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This matches the -ffunction-sections from bootstrap.pro, which tells the
compiler to create a section for each function. The -gc-sections option
tells the linker to drop what wasn't used (normally, it only drops
entire files).
Before (on Linux, built with -O3, no LTO):
text data bss dec hex filename
1746385 7920 3750 1758055 1ad367 bin/moc
1444101 6664 1894 1452659 162a73 bin/rcc
4407725 1568 4896 4414189 435aed bin/qmake
After:
text data bss dec hex filename
1131655 6520 3494 1141669 116ba5 bin/moc
1027043 5480 1766 1034289 fc831 bin/rcc
3578489 1656 5313 3585458 36b5b2 bin/qmake
Gain: 35% on moc, 28% on rcc, 19% on qmake
Before (on OS X):
__TEXT __DATA __OBJC others dec hex
1495040 12288 0 4294993008 4296500336 100176470 bin/moc
1265664 8192 0 4294983904 4296257760 10013b0e0 bin/rcc
5279744 81920 0 4297912320 4303273984 1007ec000 bin/qmake
After:
__TEXT __DATA __OBJC others dec hex
806912 8192 0 4294988132 4295803236 1000cc164 bin/moc
720896 8192 0 4294979764 4295708852 1000b50b4 bin/rcc
4841472 77824 0 4295580688 4300499984 100546c10 bin/qmake
Gain: 46% on moc, 43% on rcc, 8% on qmake.
Change-Id: Icc7cdc9fd6f5db15537b4adabaac7e7a27e539d4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Move it from bootstrap.pro into qt_module.prf so it will apply to any
other bootstrapped libraries, like libQmlDevTools.
Variable called "SPLIT_SECTIONS" because -fdata-sections could be added
in the future, if it proves to be a benefit.
Change-Id: I3fbb004f111620a84e58e9112e9bce3afd95631e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
we can't derive the doc index paths from QMAKEMODULES, as the mkspecs dir
may not live at the repo's top level.
instead, explicitly announce the repo's top level build dirs in QTREPOS,
and use that accordingly.
Task-number: QTBUG-38862
Change-Id: I643ad2bf63c8fca0ffc44ce3457dbe8a16dcab07
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Matches the compiler capabilities better and will catch all GCC-like
compilers (including Clang, LLVM and Intel CC on Unix).
Task-number: QTBUG-38544
Change-Id: I102966d307a4e167b6dcf3da08359e656f3af45e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
After bbcdccd, a deprecation warning is written to
the console every time you run qmake on iOS.
This change will make use of the new QTPLUGIN.platforms=-
instead if the deprecated CONFIG -= import_qpa_plugin
Change-Id: I51e4f9d18f6abd87512a39b3236b89d5444fd6c1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
that is, make it match the shell used by the make command.
this is unlike DIRLIST_SEPARATOR and DIR_SEPARATOR, which always match
the actual system shell.
Change-Id: I0fb277d75b32be029808623a3b77e1358c4e265e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
"system" refers to the system's native shell, which is what qmake's
system() invokes, and whose convention by far most commands invoked from
a makefile will need.
"shell" refers to the shell invoked by make, which diverges from the
system shell only when qmake/mingw32-make is called from an msys shell.
its conventions need to be used for anything the shell itself does
(e.g., assembling env variables, but also command line argument
unquoting) and the commands the mkspec sets according to the shell
(e.g., QMAKE_MOVE).
Change-Id: I0000aa9417c199cf8a810619d31ded24bb0675f9
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
at some point we stopped adding the qtmain's library path before its
respective -l flag, which lead to qmake being unable to resolve the
library location and thus ignoring its prl file.
Change-Id: I390a31f8ac2877d3823dfd2787b2cc8c696b0ec0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This allows the developer to provide a list of languages to the manifest
by listing them in WINRT_MANIFEST.languages. It also allows setting the
default language with WINRT_MANIFEST.default_language.
Task-number: QTBUG-38557
Change-Id: I5cb94c9f45146e3068d0833b9e669dc17dca14b2
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
we don't link static libs into other static libs, so the intermediate
libs need to be installed and resolved at app link time.
Task-number: QTBUG-32519
Change-Id: I0558140f98a6938b03306df7f800d66f8a19a7cd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this covers convenience libraries which are linked into dlls (if we are
not building statically) and "proper" (installed) builds of 3rdparty
code.
Change-Id: I2f00248c0baa0e73346e477724bf49bbc62ba925
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Instead of collecting all files from the "fonts" directory to deploy
them to the phone, we only collect files which are mentioned in the
FONTS variable. Otherwise fonts that were copied to the fonts directory
earlier (due to FONTS being unset (default fonts) or set to another set
of fonts) will also be deployed as part of the project.
Change-Id: I24c77e154a9f2ec75e88d487c056b0be46e17e87
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
On Android, there's a limitation set on the names of the libraries
you deploy that they must start with "lib" and end with ".so", so
Android apps will link against and deploy with the unversioned
libQt5FooBar.so libraries. When cross-compiling on Windows however,
due to the lack of symbolic links, the only installed library
used to be the main library target "libQt5FooBar.so.X.Y.Z" (for
version X.Y.Z.) This has been worked around in packaging, but
breaks building add-on modules on top of Qt, and is clearly
wrong.
This patch introduces a new "unversioned_libname" configuration
in qmake which is currently only supported for the Unix makefile
generator and only enabled for Android builds. When it is enabled,
only the unversioned library "libQt5FooBar.so" will be created.
Task-number: QTBUG-38347
Change-Id: Ia8897ca7a23a62e2a526d0e02854899b02eb19dc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
they have been fully superseded by 4255ba40ab.
Change-Id: If7ac14c8b7d3cf00fb0cb916036b62eb86c9cee0
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It has been fully obsoleted by 4255ba40ab.
This reverts commit 99eecab83d.
Change-Id: Id7b8d3bba27ff43e38e4fe32a4f2950de9ced493
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: John Layt <jlayt@kde.org>
neither .prl nor .la files even contain include paths.
in .pc files, we assign the final path to start with, so there is
nothing to replace, either.
Change-Id: I919dfa01e0a1d0ef8ef1220174de1d33c66cedf9
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Enabling check target to run test apps in iPhone simulator.
Task-number: QTBUG-36639
Change-Id: I700d998fe9f1a6c910431789e98e4789d820f3e4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
If D_FLAG_FILTER is set, duplicate name entries are filtered out, so
this flag has to be set along with D_FLAG_STAT in the call to dircntl.
Also releaved dependencies between defines__EXT_QNX__READDIR_R,
__EXT_QNX__READDIR64_R and _POSIX_THREAD_SAFE_FUNCTIONS
Task-number: QTBUG-38189
Change-Id: I4e620cb9967e3d1baf6f2109a7c83703702f805b
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
The default is still DWARF instead of DWARF with dSYM for static builds
of Qt, so that debug builds of the final application don't take forever
to build due to generating the dSYM file.
Change-Id: I370d800d7c959e05c1a8780c4ebf58fff250daa1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@digia.com>
instead of assigning plugins to the first module which claims the whole
type, try to assign it to a module which the plugin claims to extend.
as we are getting stricter in that go, somebody needs to claim the
'generic', 'platformthemes', and 'platforminputcontexts' plugin types.
the natural claimant is QtGui. however, as we don't want to auto-link
any of these plugins, make them all claim that they extend a
non-existing module.
QtGui also claims 'iconengines' plugins.
the 'printsupport' plugins are also claimed by the respective module.
Change-Id: I7af7c16089f137b8d4a4ed93d1577bd85815c87b
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this means creating forwarding pris also for plugins.
unlike for qt modules, we don't actually populate the .PATH unless it we
are making a prefix build (and thus expecting it to be outside the
regular location).
Change-Id: Id836821cddec8d5f53d0708ae001e8eaa13cc71b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the plugins already declare which modules they belong to.
additionally, we allow plugins to declare which modules they "extend" -
e.g., while the Quick accessibility plugin belongs to Gui's 'accessiblity'
type, it makes no sense to link it unless Quick is actually linked.
finally, it is possible to manually override the plugins which are linked
for a particular type, by setting QTPLUGIN.<type> (to '-' if no plugins
of this type should be linked at all).
Task-number: QTBUG-35195
Change-Id: I8273d167a046eb3f3c1c584dc6e3798212a2fa31
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The current SDP uses CPUVARDIR variable to define whether x86 or
armle-v7 is used. Therefore, the whole structure uses these two
definitions to separate simulator and device builds. Renaming
qnx-armv7le-qcc to qnx-armle-v7-qcc allows to directly use CPUVARDIR
during Qt5 builds. For compatibility reasons the old folder is kept
and includes the new qmake.conf.
This change is similar to fe61f2d6b2
where we already aligned the BB10 mkspecs to the NDK structure.
Change-Id: I7e1c0c2d137dc4049549233940e7f9d1c9f671f0
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
To enable windows xp support, we must do two things:
1. linker flag must be /SUBSYSTEM:CONSOLE,5.01 or
/SUBSYSTEM:WINDOWS,5.01. For x64, the version is 5.02.
2. Do not use Windows Kit 8. Win SDK v7.1A is recommended. Prepend the
right include paths and lib paths to INCLUDE and LIB before
building.
The Windows XP target support is enabled by passing "-target xp" to
configure.
Task-number: QTBUG-29939
Change-Id: I84c8439606cc2a9d27d64947702846faa4f1e4a2
Reviewed-by: Lucas Wang <wbsecg1@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is the right configuration of the platform within the mkspecs.
It enables the usage of additional features like the automatic
detection of platform specific prf files.
Change-Id: I2f19265d283e47c62455128f217bc44ba88cdc98
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
WinRT distinguishes between regular capabilities and device
capabilities. For now the latter section are location, microphone,
proximity and webcam. Hence we must add those properly to the generated
manifest.
However, Windows Phone currently combines all of these into the
Capability section, so add a warning if someone uses devicecapabilities
for Windows Phone.
Task-number: QTBUG-37932
Change-Id: I8e9550f29b6afdea3737cc85bdc68344fc04223d
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
For Visual Studio we can add the fonts we want to deploy to the
project file by using the DEPLOYMENT variable.
Change-Id: Ifc87a12a2bb4ec4ff1c0a8dc8f0b1fbf37e4e513
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
This define causes source incompatibilities in QML applications, as it
results in removal of properties from e.g. MouseArea. The default (null)
cursor implementation which will now be active should cause negligible
overhead with this define removed.
Change-Id: I8ee78e084cb95b4c73782a3a831f0672ba230b19
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
We no longer require this library, so remove it from the linker list.
Change-Id: Ic211f8f6d954eddce8818807619962ad009be117
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
This will enable qmake and its users to make decisions based
on the Visual Studio version without guessing it from the
mkspec's name.
Change-Id: I1bb46161111b109c2b4302bfc8c428b5f63c32d9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
clearly, this was a poor man's implementation of -force-debug-info.
Change-Id: Ib5c7e390bd0e3a6912af8c4027074a114ed33f8a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Visual Studio does not like empty dependencies block in manifest XML.
At least my Visual Studio 2013 fails to open visual manifest editor for
XML containing the following block:
<Dependencies>
</Dependencies>
If the block is removed or if the block has one or more PackageDependency
entries the editor accepts it.
Moved the <Dependencies> block to prf, so that it is only written when
project really has dependencies. Also <Capabilities> block is moved to prf
for consistency. On Windows Phone, where the <Capabilities> block is
required, it is kept in the output even if it is empty.
Change-Id: I531180d0081e4612f75be54f3813831857f1ed43
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
qmlimportscanner is run as a $$system command (as opposed
to as a makefile command) so specify it as such to
qtPrepareTool and run it as such too.
The distinction is important for MinGW-w64 static
builds where it must be run via cmd.exe and not sh.exe.
Change-Id: I0832d5138bff7f4fa1968646df28d2367ad062c2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The 4.8 compiler in the Android NDK sometimes produces uncompilable
code for armv5. In change b4252802b3
we reintroduced thumb instructions on armv5 with a work-around for
a particular case of this bug. However, the compiler now breaks
for Qt Script. There's no time to try to find a work-around for
this case, so we need to disable thumb again. It actually also
seems that this is completely broken with this compiler, so it would
probably be best to keep this disabled until the compiler is fixed.
Especially since armv5 will become part of the CI builds now, so the
compiler bug can end up blocking critical changes in the future if it's
re-enabled :/
Task-number: QTBUG-37376
Change-Id: I9e1b050ce596717ba1fa7ec2f5e8a3ce3581a3af
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
testcase.prf cannot be loaded from pro file for various reasons,
see qtbase commit history for details.
Moved runtime testdata logic from pro file to testdata.prf, and
thus made is reusable in other test cases as well.
Change-Id: I500d08dc4951e4eda862071e4ddd3e0f6de8c3d2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In case of a SUBDIR qmake project, it tried to cd into a directory
that did not exist yet. I needed to run qmake twice to get it working.
This fixes it.
Change-Id: I6d322e9a7c96a9d82df77b9ba5f19711a8180ed0
Task-number: QTBUG-37429
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
QMake always places makefiles, including vcproj files, to OUT_PWD.
BUILD_DIR i.e. QMAKE_RESOLVED_TARGET refers to location where target
is generated. If TARGET is specified in pro file with path, such as:
TARGET = ../../debug/tst_qlocale
The QMAKE_RESOLVED_TARGET refers to that path, and it differs from OUT_PWD.
Because Visual Studio requires a design-mode manifest in the same location
as the vcproj, resolved BUILD_DIR separately based on TEMPLATE.
Change-Id: I8dbaa862a5f53ac168f4643c17baabd7b4f0287d
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Since there was no extension specified for static libraries then it
would end up not being able to build Qt at all.
Change-Id: Iec9040640ba399544b86df27e370fcf23cabb4de
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It may be much faster through the CI system that way.
Change-Id: Ib5e3a438bd2ac98dd0a3806cedba152f25e219d5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
If one doesn't set CONFIG+=neon in it's mkspec but the compiler enables
it, Qt fails during linking of libQtGui,
because simd.prf isn't executed as needed (doesn't run into neon{..}).
Although a mkspec which enabled neon (-mfpu=neon) without CONFIG+=neon
could be considered broken,
it's still simpler to just 'fix' Qt to not fail unexpected.
Follow-up to e5066a3a2e
Task-number: QTBUG-37264
Change-Id: I3aa0afbe430547971e76c2c988697c133d69796b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This patch adds a new config option to qmake to enable full optimization
where it makes sense. This currently is supported on all gcc like
compilers by exchanging -O2 for -O3.
In qtbase it is used to enable full optimizations on qtcore and qtgui
and in a later patch can be used to replace similar existing logic in
QtWebKit's WTF and JavaScriptCore modules.
This fixes a performance regression from gcc 4.7 to 4.8 in the software
renderer.
An aliasing error in qregion.cpp which was exposed by more aggresive
optimization has been solved as well.
Change-Id: Ic2c6c41b79cb3846212b40e7bcc11ff492beb27f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of checking for dynamicgl in QT_CONFIG, which is apparently
not possible, revert them and do it in opengl.prf instead.
Dynamic GL is Windows-only for the time being so this should be sufficient.
Change-Id: If293ea4c9b024df52257086c8b6250602a44724d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
When this macro is not defined, a number of inline methods in the MSVC
stl will throw exceptions. This in turn generates a warning when
exceptions are not enabled on the compiler command-line.
Change-Id: I5a57ec544bda0c75f04fdea9412b03107f9ff531
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
let the syncqt + qt_module_header.prf pair handle generation of
forwarding headers.
in qtbase this is ineffective to some degree, as the need to create
QtCore's forwarding headers early for QtBootstrap requires qtbase.pro
already doing the real work, but at least we get the verification that
nothing breaks.
Other Modules (TM) will need the full functionality.
Change-Id: Ifd3dfa05c4c8a91698a365160edb6dabc84e553f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
ARM and x86 platform defines are identical, so they can be kept in a
common file.
Change-Id: I6f79cadb2e5ce265e4a5a7a0806379dc8793e539
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Wolfgang Bremer <wbremer@blackberry.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This comment is wrong and should be removed. The manifest is always
generated.
Change-Id: I281737dd6a358380fb557063eadae88909f5078b
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
The index is only helpful if the version of GDB to
create it uses the same version as the GDB version
that consumes it. Outside the "local development"
scenario this happens only by conincidence, still
we add ~3.6% to the debug library size and face
maintenance issues like QTBUG-34950.
We also don't see the same performance benefit anymore
with recent versions as we did when the feature was
added, so it's best to not create the index anymore.
People who need it, still can add it manually, or
by the 'gdb-add-index' tool that comes with recent
versions of GDB, or trust their distributors to
set up indexes matching their runtime environment.
Task-number: QTBUG-34950
Change-Id: Id4c79fa51fea9622b0891bd9b9b395b948ecb157
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
ICC 8 and 9 are positively ancient. I doubt anyone is using them for
Qt, let alone Qt 5. ICC 11 through 13 haven't supported OS X.
ICC now masquerades as Clang, so we need to let qmake and
qcompilerdetection.h know about it.
Change-Id: If0d2bd8b6a4a45250c15c9472c062effc76f17de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The patch introduces a new build configuration on Windows which
can be requested by passing -opengl dynamic to configure.
Platforms other than Windows (including WinRT) are not affected.
The existing Angle and desktop configurations are not affected.
These continue to function as before and Angle remains the default.
In the future, when all modules have added support for the dynamic
path, as described below, the default configuration could be changed
to be the dynamic one. This would allow providing a single set of
binaries in the official builds instead of the current two.
When requesting dynamic GL, Angle is built but QT_OPENGL_ES[_2] are
never defined. Instead, the code path that has traditionally been
desktop GL only becomes the dynamic path that has to do runtime
checks. Qt modules and applications are not linked to opengl32.dll or
libegl/glesv2.dll in this case. Instead, QtGui exports all necessary
egl/egl/gl functions which will, under the hood, forward all requests
to a dynamically loaded EGL/WGL/GL implementation.
Porting guide (better said, changes needed to prepare your code to
work with dynamic GL builds when the fallback to Angle is utilized):
1. In !QT_OPENGL_ES[_2] code branches use QOpenGLFunctions::isES() to
differentiate between desktop and ES where needed. Keep in mind that
it is the desktop GL header (plus qopenglext.h) that is included,
not the GLES one.
QtGui's proxy will handle some differences, for example calling
glClearDepth will route to glClearDepthf when needed. The built-in
eglGetProcAddress is able to retrieve pointers for standard GLES2
functions too so code resolving OpenGL 2 functions will function
in any case.
2. QT_CONFIG will contain "opengl" and "dynamicgl" in dynamic builds,
but never "angle" or "opengles2".
3. The preprocessor define QT_OPENGL_DYNAMIC is also available in
dynamic builds. The usage of this is strongly discouraged and should
not be needed anywhere except for QtGui and the platform plugin.
4. Code in need of the library handle can use
QOpenGLFunctions::platformGLHandle().
The decision on which library to load is currently based on a simple
test that creates a dummy window/context and tries to resolve an
OpenGL 2 function. If this fails, it goes for Angle. This seems to work
well on Win7 PCs for example that do not have proper graphics drivers
providing OpenGL installed but are D3D9 capable using the default drivers.
Setting QT_OPENGL to desktop or angle skips the test and forces
usage of the given GL. There are also two new application attributes
that could be used for the same purpose.
If Angle is requested but the libraries are not present, desktop is
tried. If desktop is requested, or if angle is requested but nothing
works, the EGL/WGL functions will still be callable but will return 0.
This conveniently means that eglInitialize() and such will report a failure.
Debug messages can be enabled by setting QT_OPENGLPROXY_DEBUG. This will
tell which implementation is chosen.
The textures example application is ported to OpenGL 2, the GL 1
code path is removed.
[ChangeLog][QtGui] Qt builds on Windows can now be configured for
dynamic loading of the OpenGL implementation. This can be requested
by passing -opengl dynamic to configure. In this mode no modules will
link to opengl32.dll or Angle's libegl/libglesv2. Instead, QtGui will
dynamically choose between desktop and Angle during the first GL/EGL/WGL
call. This allows deploying applications with a single set of Qt libraries
with the ability of transparently falling back to Angle in case the
opengl32.dll is not suitable, due to missing graphics drivers for example.
Task-number: QTBUG-36483
Change-Id: I716fdebbf60b355b7d9ef57d1e069eef366b4ab9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
There's a bug found in ICC 14.0 that causes the compiler to assert when
compiling QtDeclarative. Let's leave this here until at least one year
after the fix is released.
Intel task: DPD200253124
Task-number: QTBUG-36577
Change-Id: I76d4b41da7e60397dac65862a3a6ec024b840744
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
windeployqt is a tool that aids in the deployment of Qt libraries and
other files on Windows. This feature (CONFIG+=windeployqt) adds
automatic invocation of windeployqt for qmake projects as a post-link
action. For Visual Studio projects, windeployqt is added as a custom
target which runs after linking, automatically adding the output as
deployment items.
Task-number: QTBUG-35630
Change-Id: I4cdcb1a7f70cedccb4a4e17be5eb9f5de35a4d66
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
For normal #includes, moc simply ignores the missing file, but it could
generate problems later. It's a problem when the file being sought is
the FILE from plugin metadata. A very good example of this is Qt
Creator:
coreplugin.h:49: Error: Plugin Metadata file "Core.json" does not exist.
Change-Id: I16af04b477f52c6bd53c14147ec777b358dfdf50
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Add the required printsupport plugins to the QTPLUGIN variable
as is done for the QPA plugin.
[ChangeLog][QtPrintSupport] Made the Qt buildsystem automatically include the
necessary plugins so that static applications can print.
Task-number: QTBUG-29663
Change-Id: I0e2e3b0f25dd5714bd187711c85893926b0c4e85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Using the same architecture value in VC Project and manifest
files only makes sense for x64. Instead of doing magic we
just set the correct values inside the mkspecs. VCPROJ_ARCH
is used for Visual Studio, while the manifests use
WINRT_MANIFEST.architecture.
WINRT_MANIFEST.architecture was added to x64 mkspecs for
consistency and phone mkspecs do not use WINRT_MANIFEST.architecture
so it does not have to be set there.
Change-Id: I009473104875b4add8c0530dc6f51177919e997b
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
http://msdn.microsoft.com/en-us/library/b0084kay(v=vs.120).aspx says:
__AVX__ Defined when /arch:AVX is specified.
Now we know what flag it is, we don't need to use our _M_AVX flag
anymore. We're also now assuming that Microsoft will follow the same
pattern for AVX2 (i.e., __AVX2__), so this commit also removes the
check for _M_AVX2.
The other defines that were defined alongside AVX2 are removed because
they have no use currently in Qt.
Change-Id: I64a026b2206dbd0d2dffa7c803bee969c9b94a94
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
this hasn't happened yet at this point of processing, so we'd pass bogus
paths when shadow-building.
Change-Id: I9f9633c0dbc2aadeff1eb555a8e598ddb0837e37
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Otherwise the compiler may choose libc++ based on the deployment target,
and we'll end up with broken builds due to the mismatch between the two
libraries, eg:
Undefined symbols for architecture x86_64:
"std::ios_base::Init::Init()", referenced from:
__GLOBAL__I_a in libQt5Qml.a(qv4object.o)
...
"std::ios_base::Init::~Init()", referenced from:
__GLOBAL__I_a in libQt5Qml.a(qv4object.o)
...
"std::__throw_length_error(char const*)", referenced from:
...
This problem is not iOS specific, which is why the logic is moved
to the more generic mac/default_post.prf.
Change-Id: I28b94e614f9167fc0db84bbf1c88dd97d5629938
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of sprinkling '!ios' all around the various modules. This is
a bit more fine grained than the CFG_NOBUILD_PARTS += "tests" that we
had in configure.
Change-Id: I6ca2e5df118dfc0bb5d7b8495a3543f51dc0fa30
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This feature (package_manifest) generates a basic application manifest
from a template provided by the mkspec or the developer. It is meant to
deliver an out-of-the-box build experience without attempting to
exhaustively cover all manifest options. It is meant to be a starting
point which allows the developer to customize the manifest further. It
also becomes the default package manifest generator for Windows Phone,
replacing autogen_wmappmanifest.
Common variables, such as the target executable, are populated by qmake
in the newly created manifest. Default icons are also created if needed,
as the build will fail without them. The input manifest can be set by
assigning a file name to WINRT_MANIFEST. Additional options are
documented in the .prf file. If an existing (non-generated) manifest is
already in the directory, it will not be overwritten.
Task-number: QTBUG-35328
Change-Id: I57576a17ff9d2b564c0828f815949cb26d276bfd
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
clang is the default compiler on FreeBSD 10 (if not earlier).
Let's keep it unsupported for now. Can be promoted later.
Change-Id: I909953c986a3da09ce19d8f9f9ee2cc22c417abd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allows us to sanity check the iOS build in the CI.
Change-Id: I16f9bfafef3988dcab6efd3155503ca0d0b4d1d8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Dwarf-2 is treated as deprecated (at best) by llvm, and does not support
a lot of C++ language features. Most notably, it does not support
namespaces and template parameters. By not specifying the dwarf version,
the compiler can decide which version to use.
Change-Id: Ic32f9101c4db0f06a8ace8f5e04af9236d01598e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Added a define to suppress MSVC warning “C4996:
This function or variable may be unsafe.”
If the code is really "unsafe" then it is unsafe on
other platforms as well; so fixing these warnings just
for MSVC builds, would clutter the code and wouldn't help
in fixing issues that might exist on other platforms.
Using the same functions across all supported platforms
keeps the code clean and helps in writing code that is
safe across all platforms.
Change-Id: I470072eda4f8174bb911567ef3f061a3582ba449
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For some reason the Raspberry Pi hook includes qeglfscursor.h even
though it is not necessary. Remove this because the file got moved to
eglconvenience.
Change-Id: Ia65f5a8366d750f93eacee49004219e664b52af2
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
the newly added mac examples use it, so it needs to be grounded.
a more generic solution would be clearing out QMAKE_EXTRA_COMPILERS, but
many prf files will be loaded after us, possibly nullifying our effort.
Task-number: QTBUG-35680
Change-Id: I3aba7595898baac14bd41e9fae2ff24507187c6a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this makes it possible to compile grammars at build time.
Change-Id: Ia74383c4f29873ee7324bd5f14d72ef14faef460
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit will make qmake use -isystem automatically for any
compilers that declare support for it for any paths that are listed in
QMAKE_DEFAULT_INCDIRS.
Change-Id: I36fefc6d5bba61671f65669f0ea42704b3c3cf31
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Commit 3c375a76a1 enabled SSE2 in Qt,
but we failed to build the files that implemented the SSE2 specific
drawhelpers and image functions. Since we know what the iOS simulator
supports and the platforms it runs on we can safely enable this
ourselves without it being based on a configure test.
Change-Id: I0cfc43de80068b89aa47c34ffa84ee1c1734886c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Commit 773dd01 introduced a general mingw platform scope, which
is cleaner and more flexible than matching the spec name.
Change-Id: Ie3a9cb791a83f7c8a51bc4e23069190c452ab521
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Static builds of Qt will automatically enable C++11 for all projects,
but this happens in mac/default_post which is after our check.
Change-Id: I22a01e5d876242263fa31f8a404a65905c6c1877
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Right now /dev/fb0 is hardcoded. This is not ideal. Therefore
QT_QPA_EGLFS_FB is introduced. This environment variable can be set to
a different framebuffer device. Once it is set, eglfs will use the
specific device. This is similar to linuxfb's fb=... plugin parameter.
The actual behavior depends on the board-specific implementations.
For now only iMX6 has real support. It extracts the index from the
device name as bind the EGL display to the corresponding framebuffer
using the vendor-specific fbGetDisplayByIndex(). Other hooks can
follow suit later on.
With this patch eglfs is at least on par with linuxfb, meaning that,
if the board supports it, different apps can run on different screens.
Task-number: QTBUG-36113
Change-Id: Ia3c88bd06e108bc668433e3c5c3fce34a5a0e73d
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Those paths need not be in INCLUDEPATH: qmake always adds them to the
compiler command-line and we should match the behavior if we expand
INCLUDEPATH here.
Change-Id: I89508d15ac534b54ae873a42c4ad9764408042b5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
...unless the user passed the -no-sse2 option to the compiler.
[ChangeLog][Important Behavior Changes] Qt now automatically generates
code for processors supporting SSE2 on i386 platforms. To disable
this, pass the -no-sse2 option during Qt configuration. Since this
feature has been present on CPUs for 10 years and since Qt no longer
checks for runtime support for SSE2, we strongly encourage users to
leave the default setting on for best performance.
- For Linux distributions that must retain support for CPUs without
SSE2, we recommend doing two builds of Qt and installing the
SSE2-enabled libraries in the LIBDIR/sse2 directory. Tools,
plugins, and examples are not affected.
- See discussion on the Qt development mailing list:
http://lists.qt-project.org/pipermail/development/2013-November/014085.html
Change-Id: I7f9b1f58a9f66b6e5fe295bac15f87d34343695e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Now the only way to enable Neon support is to change the mkspec.
[ChangeLog][Important Behavior Changes] Qt no longer checks for
support for the Neon FPU on ARM platforms at runtime. Code optimized
for Neon must be enabled unconditionally at compile time by ensuring
the compiler supports Neon. You may need to edit your mkspec for that.
Task-number: QTBUG-30440
Change-Id: I4df9b2bf3cd022f8ed70f02f16878cb2cb3fe6fb
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This is a partial revert of 39e04b0222.
The original change moved the special make install target path logic
into the logic for the app template to make it possible to remove the
condition that excluded builds inside the Qt directory. This was
to make it possible to build examples in the Qt directory for Android
without moving them. However, this broke user library projects,
specifically when they were part of a subdirs project and should
have been automatically installed into the Android package. This
patch brings back the logic but only enables it for library projects,
meaning that the only examples inside Qt which cannot be built
correctly are library projects (which didn't work anyway).
[ChangeLog][Android] Fixed regression in "make install" on
library projects on Android so they can be used inside subdirs
projects again.
Task-number: QTBUG-34781
Change-Id: Iabf53ed68845b2ddd4ae66656e1372c96185660e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Changed MIPS DSP portion of the mkspecs/features/simd.prf file in order
to fix the corrupted build system for MIPS platforms.
List of the additionally optimized functions
from file src/gui/painting/qdrawhelper.cpp:
- qt_blend_rgb16_on_rgb16
- qt_fetchUntransformed_888
- qt_fetchUntransformed_444
- qt_fetchUntransformed_argb8565
from file src/gui/image/qimage.cpp:
- convert_ARGB_to_ARGB_PM_inplace
from file src/corelib/qstring.cpp:
- ucstrncmp
- toLatin1_helper
- fromLatin1_helper
Change-Id: I5c47a69784917eee29a8dbd2718828a390b27c93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Get the CXX compiler using $$QMAKE_CXX instead of ${QMAKE_VAR_QMAKE_CXX}
which causes shell syntax errors when combined with the silent flag.
Task-number: QTBUG-36159
Change-Id: I26cdbe788a20bd2df1aa3563694648e41c082a2c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This would mean we don't pass -Werror when under CONFIG += warn_off.
However, that's not the main goal. The main goal of this change is to
have -Werror appear *after* -Wall -Wextra.
With some compilers, like Clang, this is necessary to have the
-Wno-error=foo options work properly. For example, if the -Wfoo
warning gets enabled by -Wall, Clang will treat it as an error if the
arguments appear in the following order:
-Werror -Wno-error=foo -Wall
But not if they appear in this order:
-Wall -Werror -Wno-error=foo
Change-Id: I38c820bffc8277d909391e9bf557db5347836b9c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Base modules already work and produce no warnings.
Change-Id: I932d7aaecbe3404f180e185bf1e9fff4d488a05d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
As we add more classes with RValue ref qualified methods we will need
the same _compat trick and no-pch support as QString.
This patch moves the extra compiler to precompile_header.prf which is
automatically included when pch is used.
Change-Id: I422a355fd11f499ce0648a90b0385f2a6f699fcb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
while the meaning of the error message is actually pretty obvious from
the context, some people apparently expect an equivalence with their
package manager's terminology.
Change-Id: Ie7a31887bf5086e5d1d7de7e339a6d08571a4d01
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Processing the object file with ld strips away debug information for
the main() function, resulting in the debugger not being able to
break on specific lines of the function.
It also causes issues when externing sybols in main's object file.
We revert back to the approach of using the strings in-line in the
object file (which is why we keep the name the same length, 'qtmn').
Task-number: QTBUG-35553
Change-Id: I8b0acee36f48ecfefa2e4fd008a842365713d985
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Using wmain causes the problem that the linker seems to create some code
around it, which calls ExitProcess. That function however is forbidden by
the Windows Store Certification process and hence you cannot publish an
application currently. This does not apply to Windows Phone, which links
in such a way that this problem does not occur there.
With WinMain as the entry point this does not happen and also is the
default entry point. Testing locally shows that certification goes fine.
Since it does not pass the full command line string, the C-runtime method
__getmainargs is used instead. This also gives access to any environment
strings which may be passed.
Note that MSDN states that this function should only be used for desktop
applications. For XAML/C++ scenarios there is no entry function at all,
but rather the App object gets instantiated in the default template. But
this only works for XAML itself and not for plain C++ applications,
probably some other entry wrapper is created on the fly here.
Done-with: Andrew Knight <andrew.knight@digia.com>
Change-Id: I8a118eddf6cfeddeca7d676267e979af17123e02
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
QtWayland uses QtWaylandScanner to generate c++ files which will be
subclassed. This works ok in QtCompositor as it implements the pimple
pattern. However, QtWayland has to expose a library called
QtWaylandClient as a way to create specialized wayland plugins. These
classes don't promise an ABI, and has limited API guarantees, so they
subclass the classes generated by the QtWaylandScanner directly. For
this library to be possible, we have to install the generated files.
Also, it should be possible to use the private API, and that's not
possible without the generated files.
Change-Id: Id55200fe23652587390dabf84ca846e4f39cf70e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
Those flags are required to pass the Windows Store App Certification
process. Otherwise apps are not allowed to be published.
The SAFESEH option is only required for x86.
According to documentation APPCONTAINER only talks about the
executable, but when running through the certification, the Qt modules
are reported to be errornous as well.
Change-Id: I5450687dcd5bc537149e331332e253c4617df55d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
libc++ is an alternative stdlib implementation for clang.
See http://libcxx.llvm.org/ for further details.
The library is enabled by adding -stdlib=libc++ to the command line.
Change-Id: I07d09cbb69b59b579d3754c99d717d2ac6d44d67
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise Xcode might choose to use libc++, eg when the deployment target
is iOS7, and this doesn't work when Qt itself was built using libstdc++.
Change-Id: I0b0f36666ed318be9aae87ebaeb0d344109566ac
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
it's bogus in the first place that the meta files contain windows paths,
but straightening that out is a prohibitive effort. so instead generate
additional s/// commands which take care of these paths.
fwiw, the generated s///i command is a gnu extension. but as we are
doing this on windows only where we are using our built-in sed command
anyway, this should be fine.
Task-number: QTBUG-33794
Change-Id: I46fcc598db12816ee56b5371ab184f6277eb3a22
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Generating the dSYM file takes a long time due to our relatively large
static libraries, and is not really useful for a debug build where you
are likely to have the object files and Qt libraries available on your
host system for debugging anyways.
Change-Id: Ie7549975f271de8c56ca04bd28b29e6ed65f16cb
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
that means further detaching the generation and installation of debug
info from the thing calling itself A Debug Build.
Task-number: QTBUG-32412
Change-Id: I4d79d1ae4806c8e4a2d6a7ccd030fb88385dd7d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's very unlikely that these artifacts will need rebuilding during a
debugging session (these pdbs are meant to support crash dump analysis).
Change-Id: Ia8138f9298355b402d8dd3f042f85b669693de64
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Otherwise the application will not scale to the full resolution of
the device. We copy the image into the Xcode project, since it's
internal to our build system and not meant as a template to be
edited by the user.
For 5.3 we need to provide a proper qmake/qbs mechanism to handle
launch images.
Task-number: QTBUG-31431
Change-Id: Ied0b2843a78c5ea865750e0404418ced7ad27082
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
As of CMake 3.0, the output of `cmake --version` now has a second line
showing that it is maintained by Kitware. Change the version parsing to
look only at the first line of output.
Change-Id: I347de4c376e0bde25a43a38d59587d9b63f6b43a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is inappropriate on Windows, and breaks non-prefix builds there.
This is only needed when we calculate a relative path from a sysroot,
so only add it in that case.
Task-number: QTBUG-34880
Change-Id: I0e3b3d977a7b56649e4ba0077ac574aabf1dc915
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
Latest QNX versions support _readdir64_r. It will be used by
QFileSystemIterator now, when available to support large file
systems.
Change-Id: I40135f405ad72e1ba85c6a4cd282144dd8171bc6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
There is no real printing support though, it just prepares
the land for bringing printing support for API-19+.
Change-Id: Iabf78499f8fe1e4d2527e339cee5746acb8f3b3f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
!build_all is a sufficient condition for bundling headers in both debug
and release configurations, as it means that we will likely make only
one of the builds, and that needs to be self-contained.
Task-number: QTBUG-34575
Change-Id: I1a19e4b619eeff207cfbfd50d3b761053aeaa667
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
as this new cache category comes without side effects, we can
unconditionally create a cache whereever we are. this allows us to be
performant without explicit user action.
Task-number: QTBUG-31340
Change-Id: I6b88b20b61e8351aa8cbf94ad3eec65adac6e1d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Compared to other platforms there is no concept of a console
application in WinRT. Hence all applications need to be UI
applications and use winmain.
Furthermore winmain takes care of launch arguments to be
properly converted to arguments passed to user's main().
There is a chicken and egg problem with config.tests as
compilation needs to have an existing entry point which is not
available at configure time.
Hence hardcode the entry point to main for configuring to WinRT.
Those tests are pure compile tests, so the logic of the test
does not change.
Change-Id: I4d3186691a8440845c24b2529cc9646e86dfd8da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Filter out module QML import paths that point to
nonexistent file system paths.
Change-Id: I897ef50593eeb46c6c9eaec27313ec12e6113cb6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Some modules, such as Qt Multimedia, needs special permissions
to avoid getting exceptions at run-time. We should apply these
by default to the AndroidManifest.xml so that an application
using e.g. the camera will work out of the box.
Task-number: QTBUG-33953
Change-Id: Ibc1f086d249197b63e7ed1075ae7d54bdd1212f2
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
The qtAddModules functions resolves deps internally, but doesn't affect
the original QT and QT_PRIVATE variables. We need to pick up situations
such as the user adding QT += quick, which implies QT += qml through
the QtQuick module's dependecies.
Change-Id: I14411dbea3e4f7402be404073a3fe8f18dbb165f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We need to add the correct suffix to the libs we add when
running qmlimportscanner. Otherwise we will always add
release versions of the libs instead of debug versions
when generating debug builds. This in turn will confuse the
xcode generator that will try to convert the libs in
LIBS to native Xcode build variables.
Change-Id: I4d9fab49ad9e644e9bfd06caf79fc084bde2a3b7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Winmd is not used, so there is no reason to embed it.
Change-Id: I0820256aecd9c3c71b0b0c8afa53941b03f97363
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
In most cases, _S_IFLNK isn't defined, but ensure that we still have a
QT_STAT_LNK that works, for example for use around archive files
(zip/tar) that can contain symlinks
Change-Id: I9881e524b79845ce6b474b9a86e5fb25aaa31820
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
this makes it possible to properly exclude entire subprojects based on the
availability of features, rather than stuffing every single source file
with #ifdefs.
the defines are aggregated from the -qconfig <profile>,
-no-feature-<foo> and some other configure flags.
usage:
load(qfeatures)
!contains(QT_DISABLED_FEATURES, textarea): SUBDIRS += textstuff
Task-number: QTBUG-28102
Change-Id: I83400632d64312fa4b907e1318dddfe27c432387
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
But still fall back to 'com.yourcompany', just like Xcode does for the
initial launch.
Change-Id: I89afadefafc254a0014aca197741d42a0199943e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
When building under Xcode we can limit the object files search to the
current SDK and debug/release configuration.
Change-Id: Ic405f13f46a594e3ed20d82ca6b84e7e67edebfc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
I had the -fPIE option in my personalised "linux-icc-optimised" spec,
so I never noticed it was missing in the standard one.
I have no idea when -rpath-link is necessary. It isn't for me.
Task-number: QTBUG-34425
Change-Id: I54b2fb8cda10b9197d81b5630b1d29b8c338d96a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Make already the creation of the generated cpp file depend on the
creation of the generated h file, which transitively ensures that
the cpp won't be compiled before the h is there.
Change-Id: Idd3aec8d72dac341e835a3d1ef8f2986dbc1ab9f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Conceptually a Qt for iOS SDK or source build should support building
for both simulator and device, based on the same qmake binary and Qt
libraries. Qt Creator or Xcode should then be able to use the same Qt
version while still building for a single target at a time. This
applies to user libraries as well, which shouldn't require switching
to a different Qt when changing target platform from simulator to
device.
We achieve this by using Qt's exclusive_build feature, where we build
for the two targets in parallel, and then teach Xcode how to choose
the right library dynamically at build time.
Change-Id: I06d60e120d986085fb8686ced98f22f7047c4f23
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Makes it possible to join two separate builds, and opens up for using
exclusive builds to do this.
Change-Id: I87ccbdd55511fdfbef3fe8b581f40525ebf077ed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Removes the need to pass ARCHS to xcodebuild for simulator builds.
Change-Id: If15e9d387c416c5c9f83c50f5903ae0cd517ff34
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We used to compute the default exclusive build directory, eg 'debug', at
configure time, and then set OBJECTS_DIR, MOC_DIR, etc to include this
hard-coded default exclusive build directory. We then had to run a post-
process step where we replaced the 'debug' part with the current actual
exclusive build pass, eg 'release', resulting in long-standing bugs such
as QTBUG-491 where we end up replacing parts of the build output dirs
that were not part of the original exclusive build directory.
We now set the OBJECTS_DIR, MOC_DIR, etc defaults in configure like
before, but they do not include any exclusive-build information. The
exclusive build directory is handled as a separate step in default_post
where we adjust all entries in QMAKE_DIR_REPLACE to be exclusive
directories.
For backwards compatibility the new exclusive build behavior is only
enabled for variables named by QMAKE_DIR_REPLACE_SANE, which for Qt
itself applies globally to everything but DESTDIR, and for libs and
tools also applies to DESTDIR. The reason for leaving out DESTDIR in
the general case is because many tests and examples assume the old
behavior for DESTDIR. A side effect of including all the other
variables for Qt libs and tools is that the PCH output dir will be
uniformly set, which has been an issue on Windows in the past.
The addExclusiveBuilds function now takes two or more arguments,
each argument being the key for an exclusive build, which can be
customized eg. using $$key.{name,target,dir_affix}. Passing more
than two arguments results in three/four/etc-way exclusive builds,
eg debug/release/profile. Exclusive builds can also be combined, eg
static/shared + debug/release by making two calls to the function.
We also handle individual targets of combined exclusive builds,
eg static/shared + debug/release, meaning it is possible to run
'make debug' to build both static-debug and shared-debug.
Task-number: QTBUG-491
Change-Id: I02841dbbd065ac07d413dfb45cfcfe4c013674ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Otherwise we won't pick up CONFIG+= changes on the command line or
from the project file.
Change-Id: I6f7e9380f971e6271de5659534e9565024fe041d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
module names use dashes, but the internal module representation uses
underscores, so we must translate.
Change-Id: Ib6983d3731e7dae2a4d6232f8a5202390fd425e9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Before this patch, we would copy "$QTDIR/qml"
directly into the bundle as "qml". This would cause problems
if the user also tried to deploy qml files to a "qml" folder, or
if any other file in the bundle ended up with the name "qml" (which is the
case for QtDeclarative/tools/qml, where the executable is called "qml").
This patch will instead copy the contents of each import folder
into QMAKE_QML_BUNDLE_PATH, which will default to "qt_qml" on iOS
and "Resources/qt_qml" on OSX.
We also change the implementation to use a post script rather
then QMAKE_BUNDLE_DATA for two reasons:
1. Xcode does not like "copy build phases" to copy folders, only
files (You cannot even create such a phase from Xcode, although
it is possible to force it the way we create project.pbx. But
this was error prone)
2. We need to strip away unneeded files from the bundle, like
archives (which are linked in statically, not dlopened run-time).
Using rsync lets us copy and strip in one operation.
Change-Id: I7c2117f6cfbe11efdc272dff71adb0b1e619a5ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Synchronize .pdb file writing, otherwise parallel builds
will fail, when different compiler instances try to access
the same .pdb file.
See also
http://msdn.microsoft.com/en-us/library/vstudio/dn502518.aspx
Change-Id: I4998f10458d320fd98d633eded02d90bf25ed884
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the module project files declare what plugins they need, as that is
necessary for automatic android deployment.
enable wider usage of this by making the information available from the
module .pri files.
caveat: the variable is called "types", but is in fact paths, so there
can be particular plugins named.
use this new facility to replace the egregious hard-coded list of
plugin-to-module mappings from create_cmake.
possible todo: automate populating DEPLOYMENT (for wince, and whatever
else).
Change-Id: Ibb9c07cfe2b0008905204cbeb81e9c8e2ae4dc69
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead of being magic attributes of the main modules, the privates
are now proper modules of their own.
this cleans up some code paths, is more mappable to other build tools,
and enables private modules to depend on other private modules.
note that the library path is needed even in the "empty" private
modules, as in the framework case that's where headers are found.
consequently, the modules need to be explicitly marked with the new
"no_link" flag. this required some reorganization of qtAddModule().
Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This is needed to ensure that list(REMOVE_DUPLICATES) can work.
Change-Id: I3d992aa244fcdfbda7e3b48ce416e0ba5ffcde96
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is necessary so that list(REMOVE_DUPLICATES) works properly.
Change-Id: Id268637d76b1a8785c9ff0c6e09e9ad8a62bbfb6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Allows project files or mkspecs to call qmake recursively using system()
with the right arguments, which we use to fix the ios default_post.prf.
Change-Id: I90d69e2b156bb0f0af1279188b11f81c84c24fb8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it was introduced as a hack to simplify writing tests, but the change to
make use of it was backed out of testlib and nobody seems to care.
Change-Id: Icc86621b865276e86593afdb923247bbdca19d49
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The current NDK uses CPUVARDIR variable to define whether x86 or armle-v7 is used.
Therefore, the whole structure uses these two definitions to separate simulator
and device builds. Renaming blackberry-armv7le-qcc to blackberry-armle-v7-qcc
allows to directly use CPUVARDIR during Qt5 builds.
For compatibility reasons the old folder is kept and includes the new qmake.conf.
Change-Id: Ia7feeeabe16eda48140a65178af28cbb9bd085a9
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
it's wasteful, given that exactly one add-on module (and most probably
nobody else) needs it.
i'd do the same with yacc and lex, but i suspect this would cause quite
an uproar.
Change-Id: Ic2a6ca19e829393835f824e31cd0893e78c3fd39
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Otherwise, make would upon distclean first remove the xcode
project, then try to do xcodebuild distclean. xcodebuild would
then complain about a missing project.
Change-Id: I0a9a6af6d86d1a95e37f4bbafa38c63d892bf1cc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the variable may contain a complex command, so an exists() check is
doomed to failure if the tool is built dynamically.
also, the check is not really necessary: it failing indicates a bug in
the qt build system, and we don't really need to complicate the code to
deal with such corner cases.
Change-Id: I2e6087dcc6dd4a4f70bdf739550276f364c880dd
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
