The fromUtf16(ushort*) and fromUcs4(uint*) overloads are going
to be deprecated. Use the newer fromUtf16(char16_t*) and
fromUcs4(char32_t*) overloads.
As a drive-by, use std::end()/std::size() where applicable.
Change-Id: I5a93e38cae4a2e33d49c90d06c5f14f7cb7ce90c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We use the Catch2 testing framework to test Qt Testlib, which also opens
up the possibility of using it for other internal testing once it's made
available through the build system.
The test now has a --rebase mode which will write out the actual results
as new expected files. Once we add the required post-processing to the
results to remove timestamps and other testrun-specific data we can
remove the standalone python script generate_expected_output.py that
today has to be kept in sync with the test itself.
No attempt has been made to clean up the comparison-functions, but
these could all benefit from moving their logic from the comparison
to the sanitization step. This will both make the expected files
more generic, and will reduce the diff once a failure occurs, since
we're not seeing all the hunks that the comparison-functions ignored.
Change-Id: I1769d42e7958d56d1ad5da958db0e8fe3a2a3c23
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Update the auto test accordingly, and at the same time remove
all uses of QTextStream (as they aren't required).
Change-Id: I71b7cf6a6b54ea59507f27d5d2d04cc5ae5885fc
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The fromUcs2() named ctor is designed to replace all the non-char
integral-type constructors of QChar which make it very hard to control
the implicit QChar conversions, which have caused a few bugs in Qt
itself. As a classical named contructor, it simply returns QChar.
The fromUcs4() named "ctor", however, needs to expand surrogate pairs,
and thus can't just return QChar. Instead, it returns a small struct
that contains one or two char16_t's, can be iterated over and be
implicitly converted to QStringView. To avoid bikeshedding the name
(FromUcs4Result, of course :), it's defined inline and thus can't be
named outside the function. This function replaces most uses of
QChar::requiresSurrogates() in QtBase.
[ChangeLog][QtCore][QChar] Added fromUcs2(), fromUcs4().
Change-Id: I803708c14001040f75cb599e33c24a3fb8d2579c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This part of the patch changes all remaining occurrences of the local
versions of Orientation to Qt::Orientation.
Change-Id: Ic9ec19b8f069f614061f319abd30841e10cdd626
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
wchar_t hasn't been QStringView's storage_type for a very long time
(at least since 5.10). And in Qt 6, we require char16_t support not
only in the compiler, but also in the stdlib, so drop the guards and
the alternative code paths.
Change-Id: I99f28b575f61c16a2497840708beaa4b54a80f57
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We end up with an absurd situation:
QSslConfiguration conf;
//we set CA certs so that on demand loading is disabled:
conf.setCaCertificates({...});
QSslSocket s;
s.setSslConfiguration(conf);
Q_ASSERT(conf == s.sslConfiguration); // this assert fails.
Pick-to: 5.15
Change-Id: I272bed145434082acc6ead95fe3640d222b21131
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
They don't work with std::span, since std::span has neither
const_iterator nor cbegin()/cend().
To fix, perfectly forward the return type with decltype(auto) instead
of mentioning T::const_iterator, and rely on the const-qualfication of
the help::c{r,}{begin,end}() functions' arguments to select the
correct T::{r,}{begin,end}() overload.
Change-Id: I4992d4bd521d2dc0f9ea51ae70cde8286ae543a5
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The message to ignore is given in source code, hence UTF-8; it was
being ingested as local 8-bit, which lead to problems when a debug
message wasn't 7-bit clean and the system's native encoding wasn't
UTF-8. Modified QtTest's selftest to check encoding failure.
Pick-to: 5.15
Change-Id: I898744a450115b6d2ee992f1d3b36d8efaeeff7e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's documented to be undefined if the number of seconds is outside
the allowed range, but it doesn't hurt for that undefined behavior to
happen to be that the result is invalid. Added a simple test.
Change-Id: I20c3f680c7948b3904f213452272133be77e4d62
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][Important Behavior Changes][QDateTime] Removed all
locale-dependence from QDate, QTime and QDateTime, including the
Qt::DateFormat members that select the formats of the default and
system locales and the toString(Qt::DateFormat, QCalendar) overload,
which only used its calendar for these formats. All toString()
methods now use, and all fromString() methods only recognize, the C
locale's names for days and months. Use QLocale's methods if you need
to take locale into account.
Fixes: QTBUG-80441
Change-Id: I3a8968438741afb00f44262f79659c51e9b06c35
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It clearly belonged in tst_QDate::toDateTime(), for which it adds a
few more test-case and in which it inspires some further testing.
The new testing of case-insensitivity doesn't work if the format
contains stray non-format characters, so added a new data column to
take care of that.
Pick-to: 5.15
Change-Id: I73619be02091c97024a84cb963c7029e9fd0569a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They use the Qt::TextDate format, so do depend on the feature.
Rename one in the process; nothing in its test has anything to do with
de_DE locale.
Pick-to: 5.15
Change-Id: I2adae5c46e6009c13b433993ed2c3c761a500bfb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The native command buffer handle was not updated, so the subsequent
finish() call attempted to record an invalid VkCommandBuffer. The
problem was not present with offscreen frames, only when finish() is
called with a swapchain-based frame active.
Task-number: QTBUG-84066
Change-Id: I9c4cb701c3dbbc28f237d6ae1cbf65aafd1fa95f
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
It simplifies the API and reduces surprise to have rotation working by default.
On Android, the manifest specifies which orientations the application has
been designed to support; on iOS, it is controlled via the
UISupportedInterfaceOrientations property list key.
In addition, QWindow::contentOrientation() is another way to give
a hint to the window manager, or on iOS to directly control whether
the window's rotation is locked or not.
Task-number: QTBUG-35427
Task-number: QTBUG-38576
Task-number: QTBUG-44569
Task-number: QTBUG-51012
Task-number: QTBUG-83055
Change-Id: Ieed818497f686399db23813269af322bfdd237af
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Test the case where reduce function of the form:
V function(T &result, const U &intermediate)
has T and U types different.
Task-number: QTBUG-83802
Change-Id: Ic89396caba16e7e47ae3ec1527e31b8620f1b08c
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Get rid of code repetition in concurrentfilter test.
Move tests with initial value next to their original version.
Join new lambda tests into a common functions
testing all possible 16 combinations of
functor / function / member / lambda, as they
test in fact the same function. There is no need
to distinguish lambda case over other cases.
This helps in test readability and maintenance.
Add missing tests for lambdas with a combination
of initial value.
Task-number: QTBUG-83802
Change-Id: I45930c1e18a9e4e561909f46a5cbbdf0ad7ba333
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
If any of the temporary directories and files can't be created, skip the
test. Otherwise, the cleanup routine would recursively delete "/".
Change-Id: I51f908a468be8fd2ebd523ff7ce27a7c78d1b4e2
Fixes: QTBUG-83863
Pick-to: 5.15
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The system APIs expect an absolute "display name" of the file path,
so make it absolute.
The test was overly tolerant in accepting failure, as a QStorageInfo
initialized with a file path that doesn't exist is invalid, and thus
always different from the QStorageInfo of the home directory. Fix the
test to compare only valid QStorageInfo objects, and postpone the check
until the file we want to move has been created.
[ChangeLog][QtCore][QFile] moveToTrash supports relative file paths
on Windows
Change-Id: I94c8cd40c60fde469e38f76a98f867f20c6a0b15
Fixes: QTBUG-84015
Pick-to: 5.15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Also remove dead code that isn't compiled anymore in Qt 6 builds.
Change-Id: I7a7ae35e61fb2ad9cc21180fb7224357ade1505f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The replacement is to set, and configure, a QCompleter directly via
setCompleter. With the removal of the separate properties in QComboBox,
the configuration of the completer is not maintained if the line edit
is replaced. A QCompleter is created and set implicitly when the line
edit is set, unless the line edit came with a completer. This is what
the auto test verifies as well.
Change-Id: I9a4c73db5e39a2558aad346c0904be6deb4f1cd2
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This amends 23b998fa45, and the commits
3e7463411e and
947883141d. This change restores the
pre-5.13.1 behavior of setFocusProxy to not move focus away from a
previously set focus proxy.
With the previous changes, focus would move away from a proxy when a
new proxy is set, if the old proxy had focus. While there are arguments
in favor of this behavior, it is a change of behavior that shouldn't
be introduced to 20+ years old functionality in order to fix the real
bugs addressed by the initial commits.
Instead, move focus only to the new proxy when the focus widget was
the widget that gets a focus proxy.
[ChangeLog][QtWidgets][QWidget] setFocusProxy no longer moves focus
away from a previously set focus proxy, restoring pre-Qt 5.13.1
behavior.
Change-Id: Icf2ad7cba5b860014aeef91cb274c442a2ab9d42
Fixes: QTBUG-83720
Pick-to: 5.15
Reviewed-by: David Faure <david.faure@kdab.com>
We already had this approach for QtWidgets, so to avoid
adding the specific cases every time, we import all the
classes from QtCore and QtGui.
Change-Id: I38dd2eec3bbdfb83f156a48f35a2f4fda44528c7
Pick-to: 5.15
Fixes: PYSIDE-1287
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This file mustn't have changed at all, aside from the copyright headers,
since we switched to Git in October 2008.
Quick check shows the data from W3C is still online:
https://dev.w3.org/cvsweb/2001/XML-Test-Suite/
I didn't check that the CVS server is actually running because none of
my machines even has the cvs command anymore...
Pick-To: 5.15
Change-Id: I4e559af2a9a1455ab770fffd15f4e740114a2433
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Turns out that crashing on purpose is more difficult than it seems. It
should be easy, given how often we do it accidentally...
Let the null pointer dereferencing be the fall back. Some compilers are
too smart for their own good and remove the fault. Instead, let's rely
on raise(SIGABRT) on Unix and on the UD2 instruction on Windows.
Pick-To: 5.15
Change-Id: Ibdc95e9af7bd456a94ecfffd1603f1c9b73b167d
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Expected and actual were inverted.
Pick-To: 5.15
Change-Id: Idc3fae4d0f614c389d27fffd15e9fa6a0a8f25e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In that specific wrapping mode, it will first try a normal word wrap. If
it doesn't fit within the specified line width it will discard the
result of that and try WrapAnywhere by calling layout_helper()
recursively. The problem was that at the point it called itself again it
had already adjusted eng->maxWidth:
eng->maxWidth += line.textWidth;
This was not restored, but carried on to the recursive call to
layout_helper(), so the end result was that the maximumWidth would
accumulate text widths from parts of the same line twice.
Due to the same recursive behavior the minimumWidth also had a problem:
It always returned the width of the widest word because it took the
qMax() of the minimum widths of the two passes, (WordWrap and then
WrapAnywhere) effectively making the minimum width always be the width
of the widest word (even though it could wrap at finer granularity).
Pick-to: 5.15
Task-number: QTBUG-77337
Change-Id: Ie7e9c17b157506352c2da38cc7f4a8dfa1283966
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Should improve performance and is going to be required in
the future anyway.
Change-Id: I89d7c50441d2491da1ab0a4d564dcc91f52ade85
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Qt Designer let's you add custom slots and signals to the main
form; they should use string-based connection syntax since the
class is not known in setupUI(). Amends
da3cb1deb6.
Task-number: QTBUG-76375
Change-Id: I5a3a5630f77c812d48db1cdb7a8658a4d2718228
Reviewed-by: Liang Qi <liang.qi@qt.io>
A failure in testlib is apt to imply misleading failures elsewhere, so
catch those first. Likewise, broken tools or corelib break
everything. Put the rest of the list in alphabetic order.
Restructure auto.pro to use conditional SUBDIRS += (in the right
order) instead of setting SUBDIRS to a full list and then doing
conditional SUBDIRS -= for most entries. This more closely matches the
way the generated cmake config does things, although it still doesn't
regenerate cleanly.
Change-Id: Idc15326c3534eb4fdce55394269f2dfbc17fcd99
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As discussed in the mailing list and in the Qt Contributor Summit 2019.
Tested on Linux, macOS and FreeBSD, showing these fallbacks:
OS environment setlocale() call
FreeBSD empty "C.UTF-8"
FreeBSD LC_ALL=C "C.UTF-8"
Linux empty "C.UTF-8"
Linux LC_ALL=C "C.UTF-8"
Linux LANG=en_US "en_US.UTF-8"
Linux LANG=de_DE@euro "de_DE.UTF-8"
Linux LANG=en_GB.iso885915 "en_GB.UTF-8"
Linux LANG=hy_AM.armscii8 "hy_AM.UTF-8"
Linux LANG=ja_JP.sjis "ja_JP.UTF-8"
Linux LANG=ru_RU.koi8r "ru_RU.UTF-8"
macOS empty "UTF-8"
macOS LC_ALL=C "UTF-8"
Versions tested: FreeBSD 12.1, Linux w/ glibc 2.30, macOS 10.14.2.
See
* https://wiki.qt.io/Qt_Contributor_Summit_2019_-_QtCore
* https://lists.qt-project.org/pipermail/development/2019-October/037791.html
Change-Id: Ia2aa807ffa8a4c798425fffd15d97ddb4f35b0ae
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The proper solution is to use qint32 everywhere, but that is left as
a separate exercise.
Change-Id: Id0c06b102b56a1b3b48dd67c6c29c28da7d1f22d
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Add a enum and formatting for member function pointer based
connections. Now preferably use member function pointer for Qt classes
or parameterless connections.
This should not require qOverload() within Qt classes after the
Signal/Slot disambiguation.
Add command line option to force either syntax for all connections.
Task-number: QTBUG-76375
Change-Id: Icdb4051e1173172a71cd536bdbc7d1ab1edf267d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If there is a negative right bearing on the last character of the string,
it will stretch past the tab position (which aligns the advance position,
and not the right edge of the glyph). For certain fonts, this would cause
the actual ideal width to be calculated as 301 instead of 300 (which is
the right alignment edge set in the code).
Pick-to: 5.15
Fixes: QTBUG-46206
Change-Id: I03e8b8fb86e9ebe5337d3ba3384ade73d2ccdd69
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We don't rely on a latin1 locale anymore for the test,
and the other code was not doing anything.
Change-Id: I08bc08d200c9e037884d8b680dfbb24c129f3d2e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
