When compiling CUDA sources in a user project, the Qt6::Platform target
would pull in C/C++ related compiler flags, leading to compiler errors.
Make sure that we only add those flags to C/C++ source files.
Pick-to: 6.2 6.3
Fixes: QTBUG-99548
Change-Id: Idbccd65fe8f66abd1da3fce95e563065d1ed3cc6
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Add '-bigobj' for MSVC and '-Wa,-mbig-obj' for MINGW to the
PlatformCommonInternal compiler options.
Pick-to: 6.3
Change-Id: I706b83d189a116a3ab6f93d59593e237e66b0e2e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since f19ce3898e we link OpenSSL to
QTlsBackendOpenSSLPlugin instead of QtNetwork itself. In dependent Qt
repositories this leads to the following situation:
QTlsBackendOpenSSLPlugin's dependencies call
find_dependency(WrapOpenSSLHeaders), and OpenSSL_FOUND is set to ON in
that scope. Later, we call find_package(WrapOpenSSL) in a different
scope. find_package(WrapOpenSSLHeaders) bails out early, because the
target WrapOpenSSLHeaders::WrapOpenSSLHeaders exists.
find_package(OpenSSL) is not called again. The check for OpenSSL_FOUND
fails, because the variable is not visible in the scope of
FindWrapOpenSSL.cmake, and we don't create the WrapOpenSSL::WrapOpenSSL
target.
Fix this by checking for the existence of the target OpenSSL::SSL
instead of the OpenSSL_FOUND variable.
Pick-to: 6.2 6.3
Fixes: QTBUG-99623
Change-Id: Idd0e8a60fabd0c7772413d557442c0012b0b436c
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Script that wraps Qt test execution in order to iron-out flakiness.
Task-number: QTBUG-96353
Change-Id: Ie8ee780e3f4f8d086c080a7784f9f68fd1867be2
Reviewed-by: Daniel Smith <Daniel.Smith@qt.io>
CMake versions less than 3.19 don't support adding the source files to
the PRIVATE scope of the INTERFACE libraries. It looks like these
PRIVATE sources are only used by IDEs to display them in a project
tree. Skip them to avoid configuring issues.
Fixes: QTBUG-99316
Pick-to: 6.3
Change-Id: Id03f540ac9c94e920adfae5de4f364bd7aba4613
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This change tries to make the API more user friendly and prevent wrong
use of multi-abi API. ANDROID_ABI argument of qt6_add_executable was
position-depend and needed to be placed after the executable 'sources'.
Using the target property we solve this problem and provide more
consistent and common way to enable multi-abi build for the single
target.
This meanwhile also requires to execute multi-abi build configuration
in the finalizer, since the property might be set at any point.
Also the priority of the QT_ANDROID_ABI target property now is higher
than the priority of the QT_ANDROID_BUILD_ALL_ABIS variable. So target
will only build packages with the ABIs specified in QT_ANDROID_ABI
property if both are set.
Pick-to: 6.3
Task-number: QTBUG-88841
Change-Id: I3515297ed267974498913c59619433dc234ec217
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Set ${FWCryptoTokenKit} when the framework has been found.
This is useful for WIP card reader support in QtConnectivity.
Task-number: QTBUG-97946
Change-Id: I0e85e0fd2e0fc45fb3069bbdaa2d8b2c927a6c2d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Qt's WinRT support was removed long time ago.
Change-Id: I60b220e970072c3450e3793862d6f68801d2b5b3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The result variable was expanded at configure time rather than at
script execution time due to missing escaping.
A tidbit of information, the result variable can contain not only an
exit code, but a string as well.
For example on arm macOS with a crashed test it contains
'SIGTRAP'.
Curiously if the crashing executable is executed directly without
CMake, 'Trace/BPT trap: 5' is shown instead, perhaps because of
the shell.
Amends 3ef6af024b
Pick-to: 6.2 6.3
Change-Id: I50e57922abfc6eccde205c6252eebfda510bad41
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This amends commit 0bea727cac or rather
reverts it and applies a different fix for QTBUG-98843.
Use file(WRITE) instead of configure_file or file(CONFIGURE). This
command doesn't have the line endings issues in CMake 3.19 (see
QTBUG-98843). It's not problematic that the .bat file gets a new
timestamp on every configuration step, since we don't add dependencies
on it.
Fixes: QTBUG-99223
Task-number: QTBUG-98843
Change-Id: Ibdcd0e4703bf6df42c6a6d0bb2f35c5144bbe30a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This might give a few insights into why the process has failed, at least
if distinct return values are used for different errors.
Change-Id: I61fe0ede812c4dda3d0cf0f2c96a479d198d340d
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Package global data in COMDAT sections for optimization.
According to the docs, this can significantly reduce the
size of the resulting binary executable.
I've tested build Qt with /Gw locally with and without
LTCG, the result shows /Gw can reduce the binary size
indeed, but not "significantly". The result also reveals
that exes can benefit much more from /Gw than dlls.
The result can be seen from the QTBUG-98894 bug report.
Microsoft Docs:
https://docs.microsoft.com/en-us/cpp/build/reference/gw-optimize-global-data?view=msvc-170
Task-number: QTBUG-98894
Change-Id: Ibce34c98e791e519d669a5fe39c0027d1459c382
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
When building Qt we want to use the highest available 'target' SDK
version. If the version of the available SDK is lower than the minimum
required 'target' SDK version, we need to throw an error.
Pick-to: 6.2 6.3
Fixes: QTBUG-99165
Task-number: QTBUG-98870
Change-Id: Ib75567a6f33ac6d23d9f79e8ed8535839c08b91d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qt_setup_tool_path.bat did not have proper line endings on Windows with
CMake 3.19, breaking the invocation of tools that use the wrapper, for
example qmltyperegistrar.
The reason was that file(CONFIGURE) doesn't properly write line endings
with CMake 3.19. See upstream issue #21769.
Use configure_file with a proper input file to work around this issue.
Pick-to: 6.2
Fixes: QTBUG-98843
Change-Id: I2a4da15f306dc844cf83ca9721a77196c42af2ad
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
-g4 was deprecated in Emscripten 2.0.17, and since we are well past
that version we can safely use -gsource-map instead.
Change-Id: I497155619d6320661f6be0e220b52fa7d6ca0b8e
Reviewed-by: David Skoland <david.skoland@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
[ChangeLog][wasm] Recommended emscripten version is now 3.0.0
Change-Id: I9ae082509415d8f00b8e9970b730ad4a472da310
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Visual Studio 2019 introduced the dubbed FH4 feature
which can make C++ exception handling smaller on x64.
According to the article [1], it's enabled by default
for UWP applications, and Microsoft also use it in
their own widely-known commercial products such as
Office to reduce the binary size.
So make use of this feature for Qt when possible, to
get smaller binary.
As a drive-by, add "/EHs-c-" explicitly to the flags
when we want to disable C++ exception handling.
[1] Official article that introduces dubbed FH4:
https://devblogs.microsoft.com/cppblog/making-cpp-exception-handling-smaller-x64/
Change-Id: I2e3330de477f78372cf7903d0ef7a732b09552a9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Building against a static debug MSVC Qt produced LNK4099 warnings (PDB
was not found with object file).
This was because we did not install the .pdb files for the object
libraries that are created for Qt resources. Now, these .pdb files are
named like the object library targets and are installed next to the
object files.
Pick-to: 6.2
Fixes: QTBUG-97699
Change-Id: I7e23f8392b7ac657be1d2fb3b33e051ae2e4d407
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
...if an Android platform < 10 is installed.
The existing platform detection code preferred android-9 over
android-31, because the sorting did not use natural comparison.
Natural comparison was added to CMake in version 3.18. We simulate this
feature for older CMake versions.
Pick-to: 6.2
Fixes: QTBUG-98726
Change-Id: Ib2eb87bd47220feb672275fa5203df4f2b6d7ca7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Like Q_NAMESPACE_EXPORT for Q_NAMESPACE, this variant of Q_GADGET
allows passing an export macro. This is useful to avoid exporting the
whole class just to get the staticMetaObject hidden therein exported.
Before anyone asks: No, we don't need Q_OBJECT_EXPORT, because QObject
subclasses, being polymorphic, always need to have a class-level
export macro (to export their vtable), but while that technique also
works for value classes (the Q_GADGET audience), it is not desirable
for them, because it makes inline functions exported in Windows debug
builds, which is not what we want, because it needlessly restricts
what you can to with the inline functions (e.g. remove).
[ChangeLog][QtCore] Added the Q_GADGET_EXPORT macro, which is like
Q_GADGET, but allows passing an export macro (like Q_NAMESPACE_EXPORT
for Q_NAMESPACE).
Fixes: QTBUG-55458
Change-Id: I546297de1e8aa45d83381991bcd3fbca61e1eef0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When building for and running the '_check' target in Android we need
to make sure that target apk is assembled and ready for deployment.
Pick-to: 6.2
Change-Id: Ifc63aac230f0bb8375d319ec443174c5a436485e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Large address aware is enabled by default in 64-bit
compilers, but not 32-bit compilers. But Qt users
may build 32-bit Qt themself, in this case large
address aware is disabled in fact, and it may cause
some issues. So we pass /LARGEADDRESSAWARE to the
linker unconditionally to make sure large address
aware is enabled for both 32-bit and 64-bit builds.
Microsoft Docs:
https://docs.microsoft.com/en-us/cpp/build/reference/largeaddressaware-handle-large-addresses?view=msvc-170
Change-Id: Idb2603d9ba0ba9ef4477ce1c3174b7c7e8ba76f6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Not a compile option, and also added to the linker
options above.
Change-Id: Iab2107d4b5ee4bc73e85b3cd5070f1a96b3a5a3b
Reviewed-by: David Skoland <david.skoland@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
- GHS compiler doesn't have -Wextra flag and it leads to huge count of warnings.
Pick-to: 6.2
Change-Id: Id2ba654a49fb163bebc75e3a22ecaa1895ecdbe8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In preparation for addition of new baseline tests, establish a new
test category, "baseline". This is similar to the category
"benchmarks" in that it contains tests that use the QTest framework,
but conceptually are not unit tests, in contrast to those under auto/.
Move the existing QPainter baseline test, tst_lancelot, into this new
category, and rename it accordingly.
Baseline tests use the QBaselineTest extension to QTest. Move that
extension too into the tests/baseline directory, allowing the clean
out of the baselineserver directory.
Pick-to: 6.2
Change-Id: I1b527f5867c953b1d22be73798fcf7d1494712ea
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
To allow using Android 12 APIs.
Pick-to: 6.2 5.15
Change-Id: I5e9da66c84457888ec723125d16876891232a99b
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This amends commit c5409964b0.
When detecting a variable assignment, we must ignore arguments that
start with a dash. Otherwise, arguments like --prefix=~/Qt are ignored.
Change-Id: I3b143113b94ca0d8af92679c1f567fbcec298349
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The Qt bluetooth module uses ${FWCoreBluetooth} when building for iOS,
but that evaluated to empty.
Pick-to: 6.2
Change-Id: I93ff2c30697a912bed454087ae260fae9cc41b0f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We can technically build without Xcode, as long as the command line
tools are installed. We reflect that by an empty QT_MAC_XCODE_VERSION
variable.
Pick-to: 6.2
Change-Id: I40ffa28a628157e0a2c63656065ea7c41a680e01
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
And bump NTDDI_VERSION to 0x0A00000B (NTDDI_WIN10_CO) at the same time,
to unblock the developers from accessing the latest Windows APIs.
Pick-to: 6.2
Change-Id: Ifbc28c8f8b073866871685c020301f5f20dc9591
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A top-level non-developer build is supposed to default to a prefix like
"/usr/local/Qt-6.3.0". That wasn't the case.
In QtSetup.cmake we check CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT,
set CMAKE_INSTALL_PREFIX and did the same thing later in
QtBuildInternalsExtra.cmake, with a different value. Make sure we run
the latter code only in per-repo builds.
Pick-to: 6.2
Fixes: QTBUG-98087
Change-Id: I4a1291dfd126aa11c21d69809f2cf7b075c98d2e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The qtpaths tool is supposed to replace "qmake -query", and it must be
available for cross-builds as a wrapper script like qmake.
Re-use the existing facility for creating the qmake wrapper script for
creating the qtpaths wrapper script.
Pick-to: 6.2
Fixes: QTBUG-97821
Change-Id: I460bae61a531994422e1c0fba09c79e4aa65713f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's now possible to call configure with arbitrary variable assignments
"FOO=BAR" that get passed as "-DFOO=BAR" to CMake. There is no error
anymore for unknown variables. CMake already warns about those:
"Manually-specified variables were not used by the project: FOO".
[ChangeLog][configure] Users can directly assign CMake variables with
configure, for example "configure CMAKE_CXX_COMPILE=clang++-11".
Fixes: QTBUG-88210
Change-Id: Ib15e63a895df717919dd2b6623fa4d284209776f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some apps may need more initial memory when linking, emscripten will
fail with:
wasm-ld: error: initial memory too small
This increases the default initial memory form 16MB to 20MB.
Larger apps might still get this error, in which case
QT_WASM_INITIAL_MEMORY can be set.
Pick-to: 6.2
Fixes: QTBUG-97457
Change-Id: Icdc56c41fb3a3852a9a83f7a3dc15820e83e1148
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Misc. fixes, including:
Fix a couple of typos in the JavaScript code. Also, macros-
within-macros don’t work, (without resorting to preprocessor
token pasting), so remove the debug output for now.
Limit the exec() “simulateInfiniteLoop” workaround to
top-level application exec() only. This way, asyncify
can be used for nested QEventLoop::exec() calls. (Emscripten
supports one level of suspend only, so we don’t want
to use that for the top-level exec(), but instead use it
for dialogs and such).
Use the new QEventLoop::ProcessEventsFlag::ApplicationExec
enum value to detect the exec() call type.
Change-Id: Ic702bfc31faf2e9f84ac5d3ccf43d067c5c61bf0
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
The qt_finalize_framework_headers_copy function uses the module
QT_COPIED_FRAMEWORK_HEADERS property to generate the dependency list
for the ${target}_framework_headers target. In a common case elements
can be added to the QT_COPIED_FRAMEWORK_HEADERS property after the
qt_internal_add_module command call, that's why we need to make sure
that qt_finalize_framework_headers_copy is called after collecting all
headers assigned to the module.
Pick-to: 6.2
Change-Id: I2878fa6b8d4b11677c3f48345bf6e239221074c2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
To be consistent with prepare_qdoc_args.
Pick-to: 6.2
Change-Id: Ibd40d6c26f6f6fa49ea78b6476f396153b7c4ee5
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If one of the dependencies in QtFooModuleDependencies.cmake is not
found, QtFoo_FOUND will be set to False by find_dependency.
In that case, we should not create imported targets that belong to
that package.
It would be misleading for projects that do target existence checks
instead of package_FOUND checks as well as generally being
incorrect. The created imported targets might be referencing other
targets that would not exist.
Pick-to: 6.2
Fixes: QTBUG-97896
Change-Id: I09198aa3f19be047b27c29329b6e62c30fa09dc0
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Craig Scott <craig.scott@qt.io>
The function qt_commandline_assignment and everything related to it is
removed from configure. It was only used in qtbase, and all usage has
been removed.
More general variable assignments will be added in a subsequent commit.
Task-number: QTBUG-88210
Change-Id: I7cfa782e89914f2b0dc0277c46e425c8a825557e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's been deprecated since Mac OS X 10.5.
qmake templates fixed in 0768a28fbf.
Task-number: QTBUG-74872
Pick-to: 6.2
Change-Id: If7d988f27f07b6fa095b2ea51a87c306361d63d1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's been there for ages, we may as well use it and remove unnecessary
complexity from CMake.
Pick-to: 6.2
Change-Id: I2bbf422288924c198645fffd16a9742567a7e4af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
CMake's Modules/Platform/Android-Initialize.cmake was setting
CMAKE_FIND_USE_SYSTEM_ENVIRONMENT_PATH to OFF and host perl was not
picked up in PATH on Windows when building for Android.
Pick-to: 6.2
Change-Id: Ic98d8b38425231ef6aaf173fdfe958b573cc0c40
Reviewed-by: Craig Scott <craig.scott@qt.io>
One can now pass -DQT_REQUIRE_HOST_PATH_CHECK=OFF or
-DQT_REQUIRE_HOST_PATH_CHECK=ON to force disable or enable
the QT_HOST_PATH and QT_HOST_CMAKE_DIR_PATH validity checks.
One potential use case is if a project wants to manually find
QtFooTools packages by manipulating CMAKE_FIND_ROOT_PATH and such,
in which case they might not want to pass a QT_HOST_PATH.
Another potential use case is cross-building Qt with
-DQT_BUILD_TOOLS_WHEN_CROSSCOMPILING=ON and allowing the same
generated toolchain file to be used on the device image.
By default the generated toolchain file would require a host path
because it expects that it's still being used for cross-compiling.
But once the toolchain file is deployed to the device there's no need
to use the host tools anymore.
Another use case is building a desktop Qt using the host tools of
another desktop Qt. The new desktop Qt can use its newly built tools
just fine and wouldn't need the original desktop Qt tools.
QT_REQUIRE_HOST_PATH_CHECK needs to be added the list of vars to pass
through to try_compile calls.
Change-Id: I4b922b5d854828e6b9210dd8c07b4b1b8630aad1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Craig Scott <craig.scott@qt.io>
