This gives some source incompatibilities, most of them can be
handled by using auto instead of QStringRef explicitly.
[ChangeLog][Important API changes] QXmlStream now uses QStringView
insteead of QStringRef in it's API. Using auto forvariables returning
a QStringRef in Qt 5 should lead to code that can be used against both
Qt versions.
Fixes: QTBUG-84317
Change-Id: I6df3a9507276f5d16d044a6bdbe0e4810cf99440
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The change creates a slight source incompatibility. The main
things to take care of are
* code using printf statements on list.size(). Using qsizetype in
printf statements will always require a cast to work on both 32
and 64 bit.
* A few places where overloads now get ambiguous. One example is
QRandomGenerator::bounded() that has overloads for int, uint and
double, but not int64.
* Streaming list.size() to a QDataStream will change the format
depending on the architecture.
[ChangeLog][QtCore][QList] QList now uses qsizetype to index into
elements.
Change-Id: Iaff562a4d072b97f458417b670f95971bd47cbc6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Yet Another Side Effect of not keeping iterator stability.
Although not idiomatic, the pattern
while (i != e) {
auto cur = i++;
if (cond)
erase(cur);
}
was actually correct. Move to the idiomatic erase pattern
instead (it = cont.erase(it)).
The example still has memory problems all over the place on
shutdown. At least now it doesn't crash when running.
Change-Id: I30bd2c4e2b3fa7fe4e28d4426ff3d894b9bae103
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Use case-insensitive endsWith() instead of lowering a QString and then
comparing case-sensitively.
As a drive-by, replace ascii string literal with char16_t one.
Change-Id: Id4d8e5b197baba7aa3ae4c2ae57414c1242b3827
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Due to QChar being convertible from almost any integral type,
the old code actually called QString::remove(QChar).
Fix by using QString::chop() instead.
Change-Id: I345b018aa137ecff608a130e69ade5d37ef0805c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Due to the bug related to the 'new syntax' signal/slot connections,
it's unfortunately possible to have a connection not deleted properly
by the moment children objects get deleted. Then, as a result,
in e.g. QSslSocket's destructor the socket will change its state,
triggering the (now deleted) UI elements' access.
Note - the original bug was reported, the patch (only possible?) was
not accepted.
Fixes: QTBUG-83659
Change-Id: I2965532485bcd46f93f8449e4d0a30da92b572c5
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
Examples that use QDialog as main window should be maximized on Android
to avoid a black view on most of the screen.
Task-number: QTBUG-80717
Change-Id: I933c1a01d95d53da009c190c37fa32f27be5af5e
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
This reverts commit ccb2cb84f5 and
commit 0f568d0a67.
The patches fix ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commits to keep the getter as is and change the signal name instead.
Change-Id: Iddbab7c33eea03826ae7c114a01857ed45bde6db
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the signal) is deprecated; superseded by errorOccurred()
Change-Id: I11e9c774d7c6096d1e9b37c451cf0b99188b6aad
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
http example uses QStandardPaths, on Android permissions might need to
be explicitly requested to write the downloaded file.
Task-number: QTBUG-80717
Change-Id: Icd377254ad77cac661c5ae37e9081e0463493d8b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This reverts commit 94b3dd77f2.
The patch fixes ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commit to keep the getter as is and change the signal name instead.
Change-Id: I0dd60cf1ae9d1bd95beeb8ad58661ca4b1fb63b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Because bearer management is going away
Change-Id: I60439c1714e0350b0f2bbef6afc8d2015886135f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Because bearer management is going away
Change-Id: I64311895c347b3e63df75d10db1673bcfe54f52d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
I made a clazy automated check that replaced the use of QVariant::Type
by the equivalent in QMetaType.
This has been deprecated since Qt 5.0, but many uses were not yet removed.
In addition, there was some manual changes to fix the compilation errors.
Adapted the Private API of QDateTimeParser and QMimeDataPrivate
and adjust QDateTimeEdit and QSpinBox.
QVariant(QVariant::Invalid) in qstylesheet made no sense.
But note that in QVariant::save, we actually wanted to use the non-user type.
In the SQL module, many changes were actually reverted because the API
still expects QVarient::Type.
Change-Id: I98c368490e4ee465ed3a3b63bda8b8eaa50ea67e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The one that is a getter for the last error found. This is to disambiguate
the expression '&QAbstractSocket::error'. Introduce a new member-function
socketError as a replacement.
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the getter) is deprecated; superseded by socketError().
Task-number: QTBUG-80369
Change-Id: Ia2e3d108657aaa7929ab0810babe2ede309740ba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Cleanup network examples:
- use nullptr
- use member-init
- adjust includes
- use new-style connects
Change-Id: I80aa230168e5aec88a1bc93bbf49a471bfc30e7b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QDesktopWidget is marked as obsolete in docs, but it is not yet
completely deprecated, some of its methods are still in use.
Replace uses of the following methods marked as obsolete:
- QDesktopWidget::screenNumber(QWidget*) -> QWidget::screen()
- QDesktopWidget::screenGeometry(QWidget*) -> QWidget::screen()->geometry()
- QDesktopWidget::availableGeometry(QWidget*) -> QWidget::screen()->availableGeometry()
Task-number: QTBUG-76491
Change-Id: I2cca30f2b4caa6e6848e8190e09f959d2c272f33
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
* Simplify add_qt_gui_executable() to not require WIN32/MACOSX_BUNDLE
but provide it implicitly. It's redundant :)
* When on Android, build a module (shared library), just like qmake.
This requires an additional library destination in the install() call,
but that's ignored on other platforms.
* Fix typos in the android deployment generation settings function
* Use the correct cache variable to determine whether we're inside a Qt
build or not. Right now this only works inside Qt builds anyway as
QtPlatformAndroid.cmake is not publically accessible.
Change-Id: If1c763c31a7a83d0e0d854362ba7901657f63eb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Provide add_qt_gui_executable() as function in our public API that takes
care of automaticWinMain linkage. We can use this in the future to
encapsulate similarplatform-specific behavior and adjustments, such as
module generation onAndroid.
In order for the examples to see the function in Qt5CoreMacros, three more
additional fixes were required:
* Do the build_repo_end() call _before_ attempting to build the
examples, as we need the build_repo_end() to include QtPostProcess
and complete the creation of all the target config files.
Otherwise the find_package() calls in the examples see something
incomplete.
* Add more QT_NO_CREATE_TARGET guards
* Always call find_dependency on the dependencies, regardless of the
target creation mode. This way a find_package(Qt5 COMPONENTS
Widgets) will still load Qt5CoreMacros.
Change-Id: I03ce856e2f4312a050fe8043b8331cbe8a6c93e6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Create CMake config files which can be used from the very same CMake
project. These CMake config files simply do not create any targets,
controlled via the QT_NO_CREATE_TARGETS.
This patch also allows to build qtbase.git:examples as a standalone
project, against an already-built Qt.
Ran this:
ag -s "QT " examples -l -0 | xargs -0 -n 1 .../util/cmake/pro2cmake.py --is-example
Task-number: QTBUG-74713
Change-Id: I44cce5a4048618b30f890c5b789592c227a8b47d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This came about trying to remove the Java-style iterator. It was used to
iterate in reverse order, something QMap can't do, easily, due to lack
of rbegin()/rend(). Instead of writing ugly loops, use a vector of pairs,
fill it, sort it, then iterate over that one in reverse.
Change-Id: I09c8a2732a0699fff4c497778745523e20d348a1
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
