As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Deprecated QInputPanel::inputWindow() which is already
just returning QGuiApplication::activeWindow()
* Deprecated QInputPanel::inputItem() and introduced
QGuiApplication::focusObject(). Input methods can check
input method support by Qt::ImEnabled query.
Change-Id: I70a9c1c3f79aadb75c839d0489a9428f7a221df5
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Implement the public slot QWindow::close() and add the correspondent test.
Change-Id: If3f07cce3b26640f06fc52d0e4dca875d9894b3d
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
To match the previous QWindow::orientation() property which can be
useful to access from QML. Also, removed the automatic translation of
Qt::PrimaryOrientation to QScreen::primaryOrientation() on the QWindow
level, as it leads to a lot of complexity regarding the
QWindow::contentOrientationChanged() signal, and makes it hard to
distinguish between the case where the window's orientation follows
that of the screen, and the case where the orientation just happens to
be set to that of the screen.
Change-Id: I6950d1337b7f929815eff1328181855090d8066b
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Previously we only had QWindow::setOrientation() which was a hint about
the orientation the window's contents were rendered in.
However, it's necessary to separate between the orientation
corresponding to the window buffer layout and orientation of the
contents. A game for example might typically want to use a landscape
buffer even on a portrait device. Thus, we replace
QWindow::orientation() with QWindow::reportContentOrientationChange() and
QWindow::requestWindowOrientation().
Change-Id: I1f07362192daf36c45519cb05b43ac352f1945b5
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
There is no guarantee the touches will be listed in the same order in
an update: the platform/generic plug-in, the drivers, etc. are all
free to shuffle the list of touch points in each report (even though
the order is fairly stable with most systems).
Therefore, to be safe, move and release events should be generated not
from the first point in the list but from the one with the matching
id.
Change-Id: I6615224cbf2cfdc440143eb3191482a23d85c6a4
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Change-Id: I6d69ac96597f27575dd40e4c80c982f06fa88f51
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
- made test depend on copier and paster to make sure they are built first.
- Changed to use installTestHelperApp() to deploy helper apps.
Change-Id: I39e4f2ddcc3c735e17256db5638bf8a3495362f6
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The current way we do it of having the platform or touch plugin send
both mouse and touch events is not ideal. There's no good way to write
an application that works sanely both on a touch-only device and on a
desktop except by restricting yourself to only handling mouse events. If
you try to handle touch events you don't get any events at all on
desktop, and if you try to handle both, you end up getting duplicate
events on touch devices.
Instead, we should get rid of the code in the plugins that automatically
sends mouse events translated from touch events. This change enables
that by making the behaviour fully configurable in QtGui.
Two new application attributes are added to explicitly say whether
unhandled touch events should be sent as synthesized mouse events and
vice versa, and no duplicates are automatically sent as the current
situation. Synthesized mouse events are enabled by default.
We also get rid of the QTouchEvent::TouchPoint::Primary flag, which
was only used to signal that the windowing system automatically
generated mouse events for that touch point. Now we only generate mouse
events from the first touch point in the list.
Change-Id: I8e20f3480407ca8c31b42de0a4d2b319e1346b65
Reviewed-by: Laszlo Agocs <laszlo.p.agocs@nokia.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@nokia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
This makes it possible for platform plugin independent code (such as
generic plugins) to report changes to screen properties. An example
would be an accelerometer plugin that reports orientation changes
without knowing anything about the windowing system.
Change-Id: I984984b6d064327772c264bc942269422451da37
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
The previous change missed some headers from years prior to 2011, and a
few new files were merged after the previous change.
Change-Id: Ib7d1a2b7062228c2a5373da64242b2ee1f0981e1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Previously they would fall into the unicode handling and return very
strange values.
Change-Id: I62a53894c0983bf53fd79f924b40a6fd3ba02993
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
We need that information to perform some optimizations in QVariant.
Change-Id: Id9a1716e49e4cedd17cd09a32fea4ff003ef61f2
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
When decoding a string don't assume valid modifier strings. If a
modifier string is unknown return Qt::Key_unknown instead of skipping
the modifier.
Currently 'Win+a' is decoded to 'A' but should be Qt::Key_unknown.
Change-Id: I1c82031159a8b3c19924a7c9e991bc6b1f90d617
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The duplicated hash tables in QGuiApplicationPrivate and
QApplicationPrivate are now unified into one single hash table in
QGuiApplicationPrivate. This also reduced the number of lookups.
The extra processing needed to keep the touch points' first/lastPos
values in sync is now done only once, in QGuiApplication. This
eliminates the performance penalty (for widget-based apps) that was
introduced during the QPA migration.
As an added bonus the patch adds support for touch events arriving
simultaenously from multiple devices. This was broken before: As there
is no guarantee that two devices/drivers will not send touch points
with the same ID, using structures with only the ID as key is
wrong. The proper key is composed of the device ID (that is, a
QTouchDevice pointer) and the touch point ID.
The exported internal function qt_translateRawTouchEvent() has been
removed. This function cannot work properly in the QPA world: It
injected touches into the widget subsystem (QApplication) only which
is wrong, and would result in half-filled touch events due to not
routing the injected data through QGuiApplication. Autotests using
this function are migrated to
QWindowSystemInterface::handleTouchEvent().
Change-Id: I7632781d77f9e0ac4626fd7c9933511c94492156
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Unlike keyPressEvent(), mousePressEvent(), etc. the touch events had
no equivalent so one had to fall back to reimplementing event() or
using an event filter. This is now corrected by introducing
touchEvent(). Touch events are finally becoming a first-class citizen
in Qt 5.
Change-Id: Ia2044030154fd5b1b5384f08a3cb1749b798435f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
The capability flags indicate which information is valid in the touch
points. Previously there was no way to tell if e.g. the value returned
by pressure() is actually the value provided by the driver/device or
it is just something bogus due to pressure not being supported.
The points' flags return information about the individual touch
points. One use case is to differentiate between touches made by
finger and pen.
Velocity, if available, is now also exposed.
Each touch point can now contain an additional list of "raw"
positions. These points are not reported individually but are taken
into account in some way by the underlying device and drivers to
generate the final, "accurate" touch point. In case the underlying
drivers expose these additional positions, they are made available in
the lists returned by the touch points' rawScreenPosition().
The raw positions are only available in screen coordinates to prevent
wasting time with mapping from global positions in applications that
do not use this data. Instead, apps can query the QWindow to which the
touch event was sent via QTouchEvent::window() and can call
mapFromGlobal() manually if they need local raw positions.
The capability and device type information is now held in a new
QTouchDevice class. Each touch event will contain only a pointer to
one of the global QTouchDevice instances. On top of type and
capability, the new class also contains a name which can be used to
differentiate between multiple touch input devices (i.e. to tell from
which one a given QTouchEvent originates from).
The introduction of QTouchDevice has three implications: The
QTouchEvent constructor and QWindowSystemInterface::handleTouchEvent
need to be changed (to pass a QTouchDevice pointer instead of merely a
device type value), and each platform or generic plug-in is now
responsible for registering one or more devices using the new API
QWindowSystemInterface::registerTouchDevice.
Change-Id: Ic1468d3e43933d8b5691d75aa67c43e1bc7ffe3e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Failing tests are marked with CONFIG+=insignificant_test.
tst_QTextLayout currently asserts, so it has been disabled to prevent
destabilization of the CI system.
Change-Id: I7bd836ee14085689c8a0f0ce8e3c80d81a55eb94
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The ScreenOrientation enum was changed so that the values are power of
twos, angleBetween() needed to be fixed in order to reflect this.
Task-number: QTBUG-22554
Change-Id: Ia45dd6643b40b14204abf967b00c0d04834736a3
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.
This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
924d810dbd8aaff67510338d3f1197a55034062b253497b7447cfad460c59d2ff58f360cf6baa2d6
Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This commit moves tests from test/auto/ into more appropriate
locations (i.e. matching the locations in the Qt source):
- qscreen and qwindow are moved into gui/kernel/
- qopengl is moved into gui/qopengl/
Note: qscreen is disabled for now since it is broken
on Linux (see QTBUG-22554).
Change-Id: Idcc7a51e78d6d0955bddb9cb4091866659193cc8
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Compile without -qpa.
- Make Q_WS_QPA-#ifdefed sections the default in the code
- Replace some Q_WS_ by Q_OS_
- Add ### fixme for places that need checking
- Remove qpa conditionals from .pro files.
Change-Id: I6ea930afc0c236cc12a7b7e95f1b8a1c24b3a513
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I97046aa51f1b3fc100e2eb2fa115f1bf8ae6437d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
By making it possible to specify the place in memory where a
type should be constructed, any meta-type can be allocated on
the stack, for example. In the QML/JS QObject binding, this
makes it possible to call slots and access properties from
JavaScript without having to perform any mallocs (e.g. due to
QVariant creation) in the C++ <--> JS value conversion, in
the best case.
In addition to QMetaType::construct() and QMetaType::destruct(),
this change introduces QMetaType::typeSize(), which returns the
size of a type in bytes. This can be used to prepare a suitable
buffer for constructing a type using construct().
Benchmarks indicate that in-place construction is 2-5x faster
than normal construction for core and GUI types on linux-g++.
Note that there is already a QMetaType::construct() function
in Qt 4, which has been renamed to QMetaType::create() in Qt 5.
In order to avoid existing usages of construct() in user code
to call the Qt 5 construct() (when they really meant to call
create()), the third argument ("copy") of construct() is made
mandatory. Hence, calls to QMetaType::construct() written for
Qt 4 will cause a compile error when compiled with Qt 5, and
the user must adapt his code.
Task-number: QTBUG-12574
Change-Id: I836f06f6ee1c1c3edbd199a03424c78c942bdd3e
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
This test verifies that all gui types with built-in QMetaType
support can be created, either using the default constructor
or the copy constructor.
Change-Id: Ibb1c5aab8571b598638c74112471d6869516a202
Reviewed-on: http://codereview.qt-project.org/6344
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Now QInputPanel::visible() can be set true even when platform doesn't provide
a virtual keyboard. Like keyboard geometry, visibility should be dictated by
the platform plugin and not QInputPanel, whose role is more like that of a mediator.
QInputPanel::show() and ::hide() calls should be treated as requests that may fail.
Changed the QInputPanel's visible property to read-only as a setter that may
fail is not really a setter, show() and hide() should be used instead.
Enabling the new functionality cannot be activated immediatelly without breaking
existing keyboards, added a temporary function handlesInputPanelVisibility that
handovers the responsiblity of updating input panel visibility to QInputContextPlatform
only once QInputContextPlatform says that it is able to handle it.
Change-Id: Ideecaf7225cc3971f33a0ac976bd92cf7767475b
Reviewed-on: http://codereview.qt-project.org/6429
Sanity-Review: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Pekka Vuorela <pekka.ta.vuorela@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I31e069f5476f8adf9851e94b33c6afac4394b88e
Reviewed-on: http://codereview.qt-project.org/5824
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Symbian is not a supported platform for Qt5, so this code is no longer
required.
Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa
Reviewed-on: http://codereview.qt-project.org/5657
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is in preparation of removing testlib's
dependency on QtGui and QtWidgets.
Autotests that need QtWidgets api must
explicitly include it (since the types are no
longer provided by the QtGui master header).
Autotests that don't need QtGui or QtWidgets
api shouldn't link against those libraries.
Change-Id: I2808289068514fcac582808828ad4634e2631733
Reviewed-on: http://codereview.qt-project.org/5093
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Commit 079ec157f8 overloads
the touch event API in QTestLib so that QWindow * can be
passed directly to certain functions.
This fix disambiguates access to the new API by selecting
the QWindow * versions. This assumes that the QWidget *
versions are kept mostly for backwards compatibility.
Change-Id: Ib6b33edc64d81f300d4109d59fd29f25ccd605db
Reviewed-on: http://codereview.qt-project.org/4443
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
