There is no valid reason why separate debug info support is missing
from the win32 configure app. It can be used with proper cross
compilation tool chains.
Change-Id: I5cf5fba24abc3b515f893a3f5b799a0644fd3218
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
151cf2047a broke cross-compilation
for Android on Windows, since evdev-support was detected, but
there was no corresponding test to disable the mtdev-code in the
evdev files.
Task-number: QTBUG-38155
Change-Id: Ifb08fa1160a348ef64b970a89922e66dc6ddd263
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This isn't needed anymore since quite a while.
Change-Id: I80a99f988a917af5b8c64865ec7e73e519978740
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
To enable windows xp support, we must do two things:
1. linker flag must be /SUBSYSTEM:CONSOLE,5.01 or
/SUBSYSTEM:WINDOWS,5.01. For x64, the version is 5.02.
2. Do not use Windows Kit 8. Win SDK v7.1A is recommended. Prepend the
right include paths and lib paths to INCLUDE and LIB before
building.
The Windows XP target support is enabled by passing "-target xp" to
configure.
Task-number: QTBUG-29939
Change-Id: I84c8439606cc2a9d27d64947702846faa4f1e4a2
Reviewed-by: Lucas Wang <wbsecg1@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Evdev is not known to the windows configure and therefore some code
is currently broken which depends on QT_NO_EVDEV. This patch
introduces evdev to the configure app on windows and disables
evdev support for cross compilation if not available.
Change-Id: I6acb5b593668c85a19ef8658a8d4c36ec3d2a686
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Pass the -confirm-license option to external license checker which is
used in Qt commercial version.
Change-Id: I62326d1e6a8307dae64535ecf2ced762130b7e8f
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>
Enterprise only license key handling removed from configure.
This does not affect the functionality of the Open Source version nor
the enterprise version.
Change-Id: I01736eba3066c56b6e50e022fae8de6aa9bd884b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Remove definition QT_EDITION which was set in configure
since it is not used anywhere anymore.
Change-Id: I5c30ab47c6244fcb07707fd05e11decf2068f6d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Qt 4 used to have it called LICENSE.GPL3 since we used to have GPLv2 as
an option before Qt 4.5 (which is when we added the LGPL v2.1). Looks
like no one realized that the configure script looks for that file when
LICENSE.GPL was added to the modularized repositories...
Task-number: QTBUG-37175
Change-Id: Iffb35adf128c3e49a7a0c12dbccd5ebe9bccf3f2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
less platform-specific code. the qfeatures.h generation is already here.
Change-Id: Ied69fb431eed5816fbff63b33be431ee913c2bc8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The patch introduces a new build configuration on Windows which
can be requested by passing -opengl dynamic to configure.
Platforms other than Windows (including WinRT) are not affected.
The existing Angle and desktop configurations are not affected.
These continue to function as before and Angle remains the default.
In the future, when all modules have added support for the dynamic
path, as described below, the default configuration could be changed
to be the dynamic one. This would allow providing a single set of
binaries in the official builds instead of the current two.
When requesting dynamic GL, Angle is built but QT_OPENGL_ES[_2] are
never defined. Instead, the code path that has traditionally been
desktop GL only becomes the dynamic path that has to do runtime
checks. Qt modules and applications are not linked to opengl32.dll or
libegl/glesv2.dll in this case. Instead, QtGui exports all necessary
egl/egl/gl functions which will, under the hood, forward all requests
to a dynamically loaded EGL/WGL/GL implementation.
Porting guide (better said, changes needed to prepare your code to
work with dynamic GL builds when the fallback to Angle is utilized):
1. In !QT_OPENGL_ES[_2] code branches use QOpenGLFunctions::isES() to
differentiate between desktop and ES where needed. Keep in mind that
it is the desktop GL header (plus qopenglext.h) that is included,
not the GLES one.
QtGui's proxy will handle some differences, for example calling
glClearDepth will route to glClearDepthf when needed. The built-in
eglGetProcAddress is able to retrieve pointers for standard GLES2
functions too so code resolving OpenGL 2 functions will function
in any case.
2. QT_CONFIG will contain "opengl" and "dynamicgl" in dynamic builds,
but never "angle" or "opengles2".
3. The preprocessor define QT_OPENGL_DYNAMIC is also available in
dynamic builds. The usage of this is strongly discouraged and should
not be needed anywhere except for QtGui and the platform plugin.
4. Code in need of the library handle can use
QOpenGLFunctions::platformGLHandle().
The decision on which library to load is currently based on a simple
test that creates a dummy window/context and tries to resolve an
OpenGL 2 function. If this fails, it goes for Angle. This seems to work
well on Win7 PCs for example that do not have proper graphics drivers
providing OpenGL installed but are D3D9 capable using the default drivers.
Setting QT_OPENGL to desktop or angle skips the test and forces
usage of the given GL. There are also two new application attributes
that could be used for the same purpose.
If Angle is requested but the libraries are not present, desktop is
tried. If desktop is requested, or if angle is requested but nothing
works, the EGL/WGL functions will still be callable but will return 0.
This conveniently means that eglInitialize() and such will report a failure.
Debug messages can be enabled by setting QT_OPENGLPROXY_DEBUG. This will
tell which implementation is chosen.
The textures example application is ported to OpenGL 2, the GL 1
code path is removed.
[ChangeLog][QtGui] Qt builds on Windows can now be configured for
dynamic loading of the OpenGL implementation. This can be requested
by passing -opengl dynamic to configure. In this mode no modules will
link to opengl32.dll or Angle's libegl/libglesv2. Instead, QtGui will
dynamically choose between desktop and Angle during the first GL/EGL/WGL
call. This allows deploying applications with a single set of Qt libraries
with the ability of transparently falling back to Angle in case the
opengl32.dll is not suitable, due to missing graphics drivers for example.
Task-number: QTBUG-36483
Change-Id: I716fdebbf60b355b7d9ef57d1e069eef366b4ab9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Added configure test, whether lgmon (liquid graphics performance monitor)
is available. The test is supposed to be positive only for internal
BlackBerry NDKs currently.
Added calls to initialize lgmon and to indicate when an app is ready for
user input.
Change-Id: I5cbc29fb38a86585dcebd14d462436deaa1998aa
Reviewed-by: Wolfgang Bremer <wbremer@blackberry.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Use the same logic as in the Unix configure script, and disable
"widgets" if "gui" is disabled.
Change-Id: Ica338ad10b965eea297dddaaedeea61a3ae3ebe9
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Add the required printsupport plugins to the QTPLUGIN variable
as is done for the QPA plugin.
[ChangeLog][QtPrintSupport] Made the Qt buildsystem automatically include the
necessary plugins so that static applications can print.
Task-number: QTBUG-29663
Change-Id: I0e2e3b0f25dd5714bd187711c85893926b0c4e85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When MSVC supports ref-qualified members, we need to ensure that
qstring_compat.cpp can see the non-qualified definitions in qstring.h,
which means no precompiled header.
Alternatively, for a bootstrapped build we could not compile
qstring_compat.cpp or #ifndef the functions.
Change-Id: I8ece34503060f0b4b0f8f2df2fb9b0fb1311e269
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Previously the linker options were overquoted which resulted in
a broken Makefile.
Change-Id: I2a77ad07564fc75533d6e8f29b5cbe52389bcce5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Commit 773dd01 introduced a general mingw platform scope, which
is cleaner and more flexible than matching the spec name.
Change-Id: Ie3a9cb791a83f7c8a51bc4e23069190c452ab521
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixes ARM build, as the NEON drawhelpers and image conversion functions
were ifdef'ed out.
Follow-up to 1b12c0608b.
Change-Id: I0b5e89c8f445741432db2dfe1f8d971b971c8605
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is an alternative plugin for the windows platform. It shares most
code with the current windows plugin, but substitutes a direct2d-based
paint engine for window backing stores and pixmaps.
Change-Id: I78fafd9c5871fa090b49436f5b40ec80f8789f8b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Those libraries are contained in QMAKE_LIBS_CORE and
GetSpecialFolderPath() is present in all supported versions.
Change-Id: Iae40714e0f234625b063aeb50e29fc79c4aaa6ea
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
While there is no implementation for accessibility yet, enabling it allows
the interfaces to be used and an accessibility plugin to be developed
for this platform.
IAccessible2 and MSAA bridge autotests are disabled for this platform.
Change-Id: I2bfd07f6b21ca469b27d88ef11df723ac8ff8202
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
This is the first step in implementing an in-place conversion of QString
to QByteArray. This requires ref-qualifiers in member functions so we
know that we have an rvalue QString.
Converting from UTF-16 to Latin1 always requires half the memory.
For conversion from UTF-16 to UTF-8, the typical string will also need
the same memory or less: characters from U+0000 to U+007F consume one
fewer byte; characters from U+0080 to U+07FF and from U+10000 to
U+1FFFFF occupy the same space in UTF-8 and UTF-16; it's only the ones
from U+0800 to U+FFFF that consume more space in the UTF-8 string.
For the locale's 8-bit codec, we can't be sure and the code (currently)
needs to go through QTextCodec anyway.
This requires a #define set before #include'ing "qstring.h". However,
since qstring.h is included by the QtCore PCH, we need an extra qmake
compiler without the PCH flags to compile this .cpp.
After this change, the distribution of calls in QtCore, Network, Gui,
and Widgets is as follows:
const & &&
toUtf8 31 (74%) 11 (26%)
toLatin1 79 (77%) 24 (23%)
toLocal8Bit 26 (16%) 138 (84%)
Change-Id: Idd96f9ddb51b989bc59f6da50054dd10c953dd4f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Otherwise build will be broken due to no support for it.
Change-Id: If5ccd7fbcf8340600c5b12081ac4f7e2c6b420fd
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
For plugins that are built with a different (but binary compatible)
MSVC runtime than Qt is built with, the plugin's embedded manifests
prevent a successful loading of the plugin.
There's no need for having the plugins tied to a certain CRT version
as they are bound to Qt's CRT version.
Task-number: QTBUG-1297
Change-Id: I6ae4cadd99ee4657e613b07a40141a7bae08424f
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Plain QNX 6.5.0 does not have a libpps, the new QNX
has a libpps and BlackBerry has it as well. So we need
a configure check to not open another mkspec for this
platform. This fixes the plain QNX 6.5.0 build.
Change-Id: Id4b3876f2385bcb5f3df426945532e7e26133f24
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
it's entirely pointless to flood the user with information and force him
to scroll back when he most likely just made a typo.
apart from that, this reduces the data dependencies, thus easing further
refactoring.
Change-Id: I7b24274d453de54a4f02481a66d77e27d4ab0657
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The findFile would need to look though all include
paths the compiler is supporting, which can be very hard
to support for multiply compilers. It is way easier to
use a compile check to catch all include paths the
compiler supports. This fix is needed to find correctly
ICU under QNX.
Task-number: QTBUG-34743
Change-Id: I4f755042a76882b304b058355cf54e37b25df61d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is done to autodetect Neon support for QNX.
It might make sense for other platforms as well,
so enable the compile check for all target platforms.
Task-number: QTBUG-34743
Change-Id: I1d149d1942ce0caa288cb56491e4a0ba455dda7d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Some compile checks may depend on the architecture,
e.g., NEON is only available for ARM, so it makes no
sense to check it for this architecture. Therefore
we need to run the architecture check before we
auto detect settings.
Task-number: QTBUG-34743
Change-Id: I53208d25b0ae0fd93cccc7394307b8ee286576a2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Compared to other platforms there is no concept of a console
application in WinRT. Hence all applications need to be UI
applications and use winmain.
Furthermore winmain takes care of launch arguments to be
properly converted to arguments passed to user's main().
There is a chicken and egg problem with config.tests as
compilation needs to have an existing entry point which is not
available at configure time.
Hence hardcode the entry point to main for configuring to WinRT.
Those tests are pure compile tests, so the logic of the test
does not change.
Change-Id: I4d3186691a8440845c24b2529cc9646e86dfd8da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This way, a Qt compiled with qreal=float and one linked
with qreal=double can not be linked by a single downstream. That is
diagnosed at cmake-time.
Change-Id: I9183dbcfef181fadea5321d3154948e8258e4a2a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
On modern ARM CPUs there is no speed difference between
float and double anymore, so let's rather use double for
qreal to avoid rounding and precision issues. Like this
we also get much better compatibility with our desktop
OSes.
This is not binary compatible on ARM, but the old behavior
can be restored by passing -qreal float to configure.
Change-Id: I2a4b61e19a3dfa6b0bd76734cecf2634c97207fc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
on the way, this significantly simplifies the code.
Change-Id: I24f0a517e62cc4b913ffef5cab096e721653c013
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We used to compute the default exclusive build directory, eg 'debug', at
configure time, and then set OBJECTS_DIR, MOC_DIR, etc to include this
hard-coded default exclusive build directory. We then had to run a post-
process step where we replaced the 'debug' part with the current actual
exclusive build pass, eg 'release', resulting in long-standing bugs such
as QTBUG-491 where we end up replacing parts of the build output dirs
that were not part of the original exclusive build directory.
We now set the OBJECTS_DIR, MOC_DIR, etc defaults in configure like
before, but they do not include any exclusive-build information. The
exclusive build directory is handled as a separate step in default_post
where we adjust all entries in QMAKE_DIR_REPLACE to be exclusive
directories.
For backwards compatibility the new exclusive build behavior is only
enabled for variables named by QMAKE_DIR_REPLACE_SANE, which for Qt
itself applies globally to everything but DESTDIR, and for libs and
tools also applies to DESTDIR. The reason for leaving out DESTDIR in
the general case is because many tests and examples assume the old
behavior for DESTDIR. A side effect of including all the other
variables for Qt libs and tools is that the PCH output dir will be
uniformly set, which has been an issue on Windows in the past.
The addExclusiveBuilds function now takes two or more arguments,
each argument being the key for an exclusive build, which can be
customized eg. using $$key.{name,target,dir_affix}. Passing more
than two arguments results in three/four/etc-way exclusive builds,
eg debug/release/profile. Exclusive builds can also be combined, eg
static/shared + debug/release by making two calls to the function.
We also handle individual targets of combined exclusive builds,
eg static/shared + debug/release, meaning it is possible to run
'make debug' to build both static-debug and shared-debug.
Task-number: QTBUG-491
Change-Id: I02841dbbd065ac07d413dfb45cfcfe4c013674ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Avoid need to modify qnx.pro in src/plugins/platforms/qnx to
build with imf support. By default detects if necessary headers
and libraries are available. Can also be explicitly requested or
disabled with -imf and -no-imf options.
Change-Id: I3f9780fc189a33e4c93fb4f950111121f8e947c3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Newer ICU versions do not generate a .lib file any more ...
Also the check doesn't take e.g. static debug builds into account.
Instead of trying to enumerate all possible variations, just rely on the
header check. That's what we're doing for the other libs, too.
Change-Id: Idc0527f0e8ad90f298337d4ab635c7aa6a35c351
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The configure-time procedure used on Windows does not currently
perform the same tests to determine the width of a pointer as are
performed on Unix-based builds.
This causes QT_POINTER_SIZE to be undefined in the generated
qconfig.h file. This in turn breaks compilation of various Qt modules
such as QtDeclarative.
This patch adds the same level of support for automatically
determining the target platform's pointer size, as is currently
offered to Unix users.
Change-Id: I93838c1759b14089ba9f4daf442048fb5c8da738
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
