Makes it easier to interpret the output from the test, because of
embedded newlines.
Pick-to: 6.3
Change-Id: Ic15405335d804bdea761fffd16d4f141e09537f4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Simplifies the code. And removes the unnecessary quote around the
pattern that was there, for some reason.
Pick-to: 6.3
Change-Id: Ic15405335d804bdea761fffd16d4f135edf6993b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The redirect handling for http2 was a little simple. E.g. not handling
relative URLs.
Fix this using the redirect response parsing function which the http1
protocol handler already uses.
Fixes: QTBUG-100651
Pick-to: 6.3 6.2 5.15
Change-Id: Ic0cec4cacc92707e7a7fde1f4665f80995a6057e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test always fails when either the Xcb or UNIX, one of the Windows
event dispatchers is used. So only test for the event dispatcher name,
which then covers all platforms, including QNX and INTEGRITY (which
use the UNIX event dispatcher).
Pick-to: 6.3 6.2
Change-Id: I2e315831b53f823c5496ad0319319df78f064cc1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
Bring out the asymmetry between date and time more clearly; when date
is valid, an invalid time is ignored in favor of QTime(0, 0). At the
same time, eliminate an un-needed variable from the code that
implements this special handling. (Left over from when the QTime was
passed by const ref, rather than by value.)
Change-Id: I81d8a9026cbb7887a8c638a2761b3db54c088af7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It can now use startOfDay()/endOfDay() for the end-points of its
search range; and it should check transit is not empty before
dereferencing transits.at(0).
Change-Id: Ib1568f4d8d6ce301d601071bb58185be906c631a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- ICU is not supported by backend.
System supports only a simple named UTC time zone implementation(see QUtcTimeZonePrivate)
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I4a87fc3d5484d75d55890bf88d012955e5048a0b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Relying on string manipulation leads to -Wredundant-parens warnings in
the best case, and to non-compiling code (when using typedefs) in the
worst case.
We can avoid both issues by simply generating code that uses
add_pointer, which takes care of reference types (even typedef'd ones),
and creates no warnings about parens (as we don't write any anymore).
Fixes: QTBUG-100915
Pick-to: 6.3 6.2
Change-Id: Ic5b1cbfda20d920d11f51beeb62e9479261d5f00
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Moved to after the header is actually written, not just generated.
For requests with data (put/post) we may have to wait for a callback
before the data to write is available. Since we then delay writing the
header as well it would be disingenuous to emit requestSent().
Pick-to: 6.3
Change-Id: I76c2d40ca48faaa1f6730ce8b3d5a8a4c3156f8f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Some of the UI elements in the a11y tests are allocated dynamically,
which means that if the test fails, the element is not destroyed
properly. As a result, the "hanging" UI elements affect all the
following tests, which leads to more test failures and even hangs.
This patch wraps all such allocations into smart pointers, which
guarantees correct destruction in case of test failure, so that other
tests are not affected, and also prevents memleaks.
As a drive-by:
- use nullptr instead of 0 in constructors;
- create some objects on stack instead of dynamically allocating
memory for them;
- remove some unneeded 'delete' calls for the objects that belong
to QObject-hierarchy.
Task-number: QTBUG-87674
Pick-to: 6.3 6.2
Change-Id: I0dcc26990955cd7b240a689a7438880b686985b7
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
These tests rely on reading output sent to stderr, so make
sure their output does go there.
Pick-to: 6.2 6.3
Change-Id: If62c073101c1d2e3d64f8cb2769d67f3b9fbeefb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The hugeQImage test loads, as its name suggests, a huge image.
At 2.5 GiB it's too big for the hard-coded 1 GiB limit on RAM
that the QNX toolchain hard-codes when it's started in QEMU.
Pick-to: 6.2 6.3
Task-number: QTBUG-100929
Change-Id: I8e8caaff7fd1dd0e648ada5df613c793f72bcf5d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Fixing documentation and removing tests.
[ChangeLog][Important Behavior Changes] The qNextPowerOfTwo()
functions now have preconditions.
Change-Id: If6d5e8bee66826910e89be7cac388a1f0422ebfd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
More mindless coding-style conformance. Includes moving & or * to
after the space, not before, in declarations; and spaces after commas.
Change-Id: I221fef1e4de69d6c55d33dfc533aa74e2fd72df0
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
With one exception: in a macro-definition with a backslash-newline
immediately following the open-parenthesis.
Change-Id: I0fc8d7492676402636785d571e4667881334af6a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Simply if (!condition) QSKIP(...) instead of having a long block
depend on the condition with the QSKIP() in its else block (which
should have had braces, as it was).
While dedenting the code block, tidied up spacing: only include blank
lines where they break up the code into blocks that go together, don't
leave spaces just inside parentheses.
Change-Id: I0196150088be88a7c6073b997a315b8f14d5f392
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Use QVERIFY() rather than comparison to true; QVERIFY() the negation
rather comparing to false; prefer QCOMPARE() otherwise for
comparisons, except for a few special cases involving very long
strings. Fix up the phrasing of a few QSKIP()s in the process.
Also, QCOMPARE() can handle an enum as expected value without
int-casting.
Change-Id: I9a1b82e5f4e10df6427bcc184b7757737df7db4f
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
In some cases by adjusting where the splits happen within concatenated
strings.
Change-Id: I4cffc41cda4582654151ba45d1478285caee7c81
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Prefer pre-decrement over post-decrement, turn a while into a for,
Don't put a while's body on the same line.
Change-Id: I5653a9bcec7901d205a91927c4b08e3dc13e0ca6
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reflowed some over-long ones, fixed some typos, capitalise starts of
sentences (and end them with suitable punctuation). Removed one as
redundant, made another pair redundant by changing the code (use an
overt NaN instead of commenting that it's happening). Prefer C++-style
when single-line. Don't pretend to be QDoc comments, or have other
eccentricities about start-markers.
Change-Id: I5a30e1b22a08866124f09060bb35f5bd27cd443b
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Much of the test code simply had a blank line after each check. Keep
the ones that separate groups of related statements, but remove the
ones that separated members of such groups. In some cases swap a blank
line and a code line to put the code with things it relates to.
Change-Id: Ie33863080d407898b2b2f044599398980ab9793d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Split some long declarations of two variables in one line into two
separate declarations. Made more things const, made some consts
constexpr. Skip a variable entirely when it's only used once (and not
giving us some other benefit). Moved some declarations closer to their
variables' first uses.
Replace some Capitalised variable names with lower-case ones.
Change-Id: I3b8dac46530ba1c2e6100cb007b5487253304526
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
It saves the conversion to UTF-16 until the formatting. Split up long
lines, purge spaces just inside parentheses, and otherwise tidy
affected lines. Don't use backslash-newline for line continuation
within string literals; juxtaposition is cleaner.
Change-Id: I9c3d3e33f5ecbdb530538679147f7bc32afbeb05
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
It's terser and cleaner to read. Likewise for
QString::fromLatin1(). QCOMPARE() can take a QStringView, hence u"..."
as its expected string; other uses need u"..."_qs.
Change-Id: Iaf96569ff3ce69c890badfb6e40f702a78b100b3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Marc alleges it is more efficient.
Corrected part of a message to be more accurate in the process.
Save some casting by using suitable format specifiers.
Change-Id: Ic31a4e17b8910d35781a494ec860c7a08f08f33b
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
When the format is an ASCII string, there's no point widening it to
UTF-16 before the actual formatting step. Also, don't construct the
format string using string arithmetic, when passing another parameter
to arg() will do just as well. In the process, restructured
generic_data(), split long lines and conform spacing to Qt coding
style on affected lines. Simplified initialization of two string
fragments by using QL1S instead of QString, too.
Change-Id: Ib101dcf9296cc532291518bcef8e0a8de597b8a0
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
In tst_qguiapplication and tst_qcoreapplication,
the application version should be set. On Android, this
is done using QT_ANDROID_VERSION_CODE.
Pick-to: 6.2 6.3
Change-Id: I6b473ad25092fb24df9400e0ab8fbb8ea4edbb6a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Tests are run for QNX in qemu similar to b2qt currently (using offscreen
plugin and software rendering). So the issue is same.
Pick-to: 6.2 6.3
Task-number: QTBUG-100930
Change-Id: Ie973c6c611ac48703fd7cce53925940b80858bc8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
on Wayland
Task-number: QTBUG-100891
Pick-to: 6.3 6.2
Change-Id: Iadf12364ded4549988ad75a9487c7e96e963a956
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Scroll tests relied on having a small window. On Android, the
window can not be smaller than the screen.
This patch changes the tests so that the windows have large
enough content so scrolling can happen.
Fixes: QTBUG-87408
Pick-to: 6.2 6.3
Change-Id: I26a444518fd934527089297c594673937f0ecf88
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qabstractitemview requires a movable cursor.
This patch skips the test if there is no movable cursor.
Pick-to: 6.2 6.3
Fixes: QTBUG-87400
Change-Id: I4e917b2ad062ce068f23603410aa9209edb9828d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Issue introduced by commit 465701bb98.
[ChangeLog][QtCore][QMetaObjectBuilder] Fixed a bug that would cause
addProperty() to use the incorrect type for the property if the
property's name matched a valid type registered with QMetaType.
Pick-to: 6.2 6.3
Change-Id: Ic15405335d804bdea761fffd16d402f2c9611f30
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Inline the content to avoid a round-trip through qjsonarray.cpp and
qjsonobject.cpp.
This change revealed an inadviseable unit test check that dereferences
the end() iterator to get its type. I haven't changed it, but have
marked with ###. I also fixed a likely copy&paste mistake in that test.
Change-Id: I89446ea06b5742efb194fffd16bb774f3bfbe5f5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Commit 35adb74ddd ("Reimplement JSON
support on top of Cbor") accidentally forgot to multiply by 2 the index
stored in the QJsonObject::iterator. The same mistake was propagated
when QJsonObject::iterator was converted to QJsonValueRef. This had no
ill effects because the o->elements container would always contain more
elements, but it meant the check was ineffective and meant nothing.
So instead of doing nothing when the iterator does not point to this
container, simply assume it does. Bad things will happen if you try to
erase an iterator that points to another container, but that's true for
almost all container/iterator mechanisms.
Drive-by modernization of some of the surrounding lines.
Change-Id: I89446ea06b5742efb194fffd16bb7c322c2fc4f2
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The 0x10000 limit should not apply if the key is a valid index in the
array.
Change-Id: I5e52dc5b093c43a3b678fffd16b6a2a5a69acd61
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
I screwed up when I wrote QCborValueRef by not having the ConstRef
type. The code worked, but it wasn't const-correct, allowing you to
write:
const QCborArray &arr = something();
*arr.begin() = QCborArray();
This mistake was brought over to QJsonValue in Qt 6.0, so it has to be
fixed for QJsonValue too. The actual fixes are in the next couple of
commits.
This change is believed to be binary-compatible: the Q{Json,Cbor}ValueRef
classes continue to have the exact same size, except that they're now
empty and have a new base class. They weren't trivial before this commit
doesn't change that.
[ChangeLog][Potentially Source-Incompatible Changes] The iterator
classes for Qt's JSON and CBOR containers (array and map/object) had a
const correctness issue which allowed a const_iterator to mutate the
container being iterated on, even if that container was itself const. Qt
6.4 has a fix for this, but will cause compilation issues where
QCborValueRef and QJsonValueRef were used where the correctness could be
violated. To keep code compiling with both 6.3 and 6.4, either change to
non-const iteration or replace the QxxxValueRef with a const QxxxValue
reference. This change is binary-compatible.
Change-Id: I5e52dc5b093c43a3b678fffd16b6063333765ae0
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The flag IsContainer was not set, causing the QCborContainerPrivate to
become confused.
This commit also expands and subsumes the existing test for QCborValue
(non-Ref).
Change-Id: I5e52dc5b093c43a3b678fffd16b6a17c6f4a0676
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This has found several missing const qualifications, a missing
QCborMap::Iterator method, and a missing one in QCborValue too.
The methods "### TEMPORARY" in this commit are actually removed in two
commits.
Change-Id: I5e52dc5b093c43a3b678fffd16b6939f62954dc4
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
- New testcase tst_eventdispatcher added under commit d292f0143f.
It shows that only glib implementation works correctly.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I7b861a6207fcb319de362645fc8f00a8ab6cd4b9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Single-line bodies of single-line controls don't need braces.
If one block of an if/else chain needs braces, the rest get them too.
One long condition needed a split that forced its body to need braces.
Change-Id: Ic4116b1273e16a586fdec18e6d8228e48a9cb07c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
