TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Only add C++14 to the project configuration when C++14 support is
available on the platform. Adding it because the platform supports
C++11 doesn't work when the platform _only_ supports C++11 (e.g.,
QNX 6.6.0).
Task-number: QTBUG-49491
Change-Id: I15de38bb06d912a314b9dd18c80b513cc06a855e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In C++, signed overflow math is Undefined Behavior. However, many CPUs
do implement some way to check for overflow. Some compilers expose
intrinsics to use this functionality. If the no intrinsic is exposed,
overflow checking can be done by widening the result type and "manually"
checking for overflow. Or, for X86, by using inline assembly to use the
CPU features.
Used in QtQml.
Change-Id: I2ef2523ccaa98f6757a45e24862a2fa730a26bb0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The previous implementations did not check the full mantissa. The result
was that certain NaN values were seen as +/-Infinity.
A nice benefit is that the generated code for this implementation is also
faster.
Task-number: QTBUG-47692
Change-Id: I1507ec579ccd9a2ab97da8cf83dabbc5d6e28597
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The code still produces Internal Compiler Errors in release mode.
Task-number: QTBUG-46344
Change-Id: I86d3608b13a197a0b65b83829d1512203e1578f8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Most processors have carry flags which they set on addition overflow, so
it's a good idea to access them whenever possible. Most of them also
have widening multiply instructions that can be used to detect overflow
of the non-widening version.
Tested to compile on:
Architecture Compiler
x86 GCC 4.9, GCC 5*, Clang 3.6*, ICC 16 beta
x86-64 GCC 4.9, GCC 5*, Clang 3.6*, ICC 16 beta
x86-64 ILP32 GCC 4.9, GCC 5*, Clang 3.6*
IA-64 LP64 GCC 4.8
ARMv7-A GCC 4.9, Clang 3.6*
AArch64 Clang 3.6*
MIPS GCC 4.9, Clang 3.6*
MIPS64 GCC 4.9, Clang 3.6*
PowerPC GCC 4.9, Clang 3.6*
PowerPC 64 GCC 4.9, Clang 3.6*
SPARC Clang 3.6*
SPARCv9 Clang 3.6*
[*] supports the intrinsics
If the compiler does not offer a way to detect an overflow, we do it by
hand. For unsigned additions, that's easy, since the C++ language
specifies the behavior of the overflow. That's also the reason why this
code is implemented only for unsigned integers.
For the multiplication, if the compiler does not support widening
multiplications, we do it with a division instead. This is necessary for
GCC < 4.5 and compilers not compatible with GCC or MSVC.
Change-Id: I049a653beeb5454c9539ffff13e637de0f1338c1
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Qt Creator needs to be able to determine structure sizes and data
member offsets for certain private types even in the absence of debug
information.
It is sufficient to keep and test the actual data sets on the Qt Creator
side, as long library provides a hint which data set is needed.
So far, HookDataVersion was meant to be used for that purpose. To
make it more explicit, this patch introduce a TypeInformationVersion
field in qtHookData.
Change-Id: Ia1c3c6f62f314d63c4df289ef456f047c5e84cf4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Tests from corelib/tools were omitted in this change.
Change-Id: I4c8786d33fcf429d11b2b624c7cd89c28cadb518
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
An object that throws in its constructor cannot be reentered. This
violates both C++11 and C++98. It's also a regression from MSVC 2013.
The unit test is renamed to indicate what it really does, as opposed to
a misleading name that was probably a "thinko" on my part.
Task-number: QTBUG-47224
Change-Id: Ib306f8f647014b399b87ffff13f132436d0578ef
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The Intel compiler defaults to "fast math" mode, which is why those
tests had been failing. So for the test that is trying to check whether
we conform to IEEE strict requirements, turn on strict requirements.
Change-Id: I02f8426b1c8e4241ac10ffff13e8efa224f313b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
OS X has an unreasonably low default for the maximum number of open
file descriptors (256). The unit test creates about 200 threads and each
thread in Qt creates at least two file descriptors (pipe), so the test
cannot execute.
Change-Id: I656367bca6d0a40fb1edb8c72914304db0f429ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Otherwise, make check does nothing, always succeeding.
Change-Id: I0fe04697e02ab0f33cd9aebb550777e200c70804
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Add an 'info' message type that can be used for messages that are neither
warnings (QtWarningMsg), nor for debugging only (QtDebugMsg). This is
useful mainly for applications that do not have to adhere to the
'do not print anything by default' paradigm that we have for
the Qt libraries itself.
[ChangeLog][QtCore][Logging] QtInfoMsg got added as a new QtMsgType.
Use the new qInfo(), qCInfo() macros to log to it.
Change-Id: I810995d63de46c41a9a99a34d37c0d417fa87a05
Reviewed-by: Jason McDonald <macadder1@gmail.com>
%{threadid} should have been %{qthreadptr} but we forgot to make the
change for Qt 5.4. So do it now.
[ChangeLog][QtCore][Logging framework] %{threadid} now prints the real
thread ID. On Linux, OS X, iOS, FreeBSD and Windows, the value is unique
system-wide. On other systems, it will print something that may be
process-specific (the value of pthread_self(3)). To print the pointer
to QThread::current(), use %{qthreadptr}.
Change-Id: Ie383ff864a11966cf5d095b966a30ace65d34ee6
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Since those are unpredictable, there's little we can match, besides the
"0x" for the QThread pointer. For the PID, at least we can compare it to
the value from QProcess.
Change-Id: I89420306863b95c82be761baabd733a7f17eba5e
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
This test fails if the environment has the variable set.
Change-Id: Ibd54ff3e6e22a885341898889088ac56e84282b1
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The default should be the actual time of day. Showing the process's time
is the optional case. In the future, we'll provide a way to showing the
monotonic reference time ("boot") and we should improve the detection of
actual application runtime.
Change-Id: I41936d77ab9fad2073dc0ce1c97cabe57ec39f16
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Do not automatically add a \n to all messages formatted by
qFormatLogMessage. Some backends require a final newline,
some don't, so it's best to only append it where it's actually needed.
The returned string will be null if the pattern is empty. This allows
to differentiate between the case that the pattern just didn't apply
(empty line is printed), and the case that qSetMessagePattern(QString())
have been called (nothing is printed).
Change-Id: I17fde997a4074f58f82de6dea129948155c322d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Change-Id: I823566ba72668c611d225aa92c4d09a53cabe8fc
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Tracking the file, line, function means the information has to be stored
in the binaries, enlarging the size. It also might be a surprise to some
commercial customers that their internal file & function names are
'leaked'. Therefore we enable it for debug builds only.
[ChangeLog][QtCore][Logging] File, line, function information are not
recorded anymore for logging statements in release builds. Set
QT_MESSAGELOGCONTEXT explicitly to enable recording in all configurations.
Change-Id: I454bdb42bcf5b5a8de6507f29f2a61109dca9b91
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
I think supporting them now is too complex for the Qt code. We would
probably need to rewrite the parser using a tokenizer so we can find the
right name of the function. Just skipping backwards breaks the support
for returning function pointers and PMFs.
Change-Id: I78636437ecd46d77e6b9b013b2f2668cca1b6cd6
Reviewed-by: David Faure <david.faure@kdab.com>
A lot of code in Qt uses VAR=1 for enabling or disabling some feature
or other, ignoring qEnvironmentVariableIsSet(), which was added for
that purpose. Other code actually reads numerical values from
environment variables. For both use-cases, provide a non-throwing,
non-memory-allocating way to get the numerical (int) value of an
environment variable, complementing qEnvironmentVariableIs{Set,Empty}().
[ChangeLog][QtCore] Added qEnvironmentVariableIntValue().
Change-Id: I81c85287ea10d355c1bbf8d7807ec9a0e477bce0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Both Q_LITTLE_ENDIAN and Q_BIG_ENDIAN macros are always defined
on all architectures. So, byte order detection results in
"little_endian" value for big endian systems. Test the system
endianness in a right way, according to Q_BYTE_ORDER macro
documentation.
Change-Id: I5523f90567e78d679a3ff2902a8f5377ed39ceb1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit adds tests for ref-qualified member functions, the new
syntax for functions and decltype.
__PRETTY_FUNCTION__ for lambdas varies wildly between compilers and will
produce really bizarre results after cleanup. It's not tested and is
known to be broken.
Change-Id: I70c8dbcba54790357cecba35aa45c5cc672f29d1
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Export the former qMessageFormatString() as qFormatLogMessage(). This
allows custom message handlers to format their messages just like the
default message handler, taking qSetMessagePattern() /
QT_MESSAGE_PATTERN into account.
The method should arguably not add the '\n' at the end, which a follow
up commit will fix.
Change-Id: Ib2a9cfda91473df079daf03bf3197e6ac63e013e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
On supported platform, allow to show a backtrace by using
%{backtrace} or %{backtrace depth=N separator="|"}
[ChangeLog][QtCore][Logging] QT_MESSAGE_PATTERN can include a
backtrace using %{backtrace}
Change-Id: Ib00418c070d3bd6fe846dc04bf69fa91ba64f9cd
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
This revert commit de1d5815c1 which
wrongly fixed a typo. There is no typo because we use startsWith
with that constant.
Also added a test because the %{time} support was added in commit
93563952d0 but the test was missing
Change-Id: Ic96e6f21f989ca3a2905ec6c89b93d2627b77b40
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
