Give the macro and its parameters clearer names, wrap the macro body
in do {...} while (0), use QCOMPARE() rather than QVERIFY()ing
comparisons, convert the result type to QMetaType::Type rather than
QVariant's deprecated equivalent, save one macro parameter by using
decltype() on another. Simplify one check by pulling out a common
sub-expression as a local variable.
In the process, give the settings keys meaningful names rather than
just "key" with a numeric suffix.
Ideally this test would be reworked to be data-driven, instead of
using macros, but the use of qvariant_cast<> to convert a read-back
value, along with the variable type of the input value compared to the
result of that cast, precludes this (as far as I can see).
Change-Id: I4e083cd0dea14d723910873829352e15740006bd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Move the large block unrelated to the macro-driven parts to before the
macro is defined. This makes it clearer that it has nothing to do with
the macro-driven part of the test. This is, in any case, a more basic
test of behavior, so may as well go first. Rename the tested key in
the process.
Change-Id: I783fcd812e36320e9bb9765bab3ec09b56d6e6e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Move its static populateWithFormats to before the class is declared
and make the _data() methods that call it (including one that did so
via another) inline so that we can see which are this simple - and
thus which aren't.
Change-Id: I71863244ba0e4bd188424b6a3f8d86d5d9f635a9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The functions it defines depend on many many types in QtCore for which
it did not have a #include; both files that included it thus had to
pull in QtCore to compile. Put that #include where it belongs and
clean out many specific QtCore includes that it makes redundant.
Change-Id: Ie9d9ec325d4879d771cb14baecb06fecbdaf62c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It's one thing that this is not part of OpenGL ES, but it is optional
even with Vulkan, with some mobile GPUs not offering the feature at all.
Change-Id: I4e2c6642eccb0793e69074b4b6eeb2b7cef3516e
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Added QFuture::unwrap() for unwrapping the future nested inside
QFuture<QFuture<T>>. QTBUG-86725 suggests doing the unwrapping
automatically inside .then(), but this will change the return type
of .then() that used to return QFuture<QFuture<T>> and might cause
SC breaks. Apart from that, QFuture::unwrap() might be helpful in
general, for asynchronous computations that return a nested QFuture.
[ChangeLog][QtCore][QFuture] Added QFuture::unwrap() for unwrapping the
future nested inside QFuture<QFuture<T>>.
Task-number: QTBUG-86725
Change-Id: I8886743aca261dca46f62d9dfcaead4a141d3dc4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Instead of having Q_UNUSED and QSKIP in the test itself, we just skip in
the _data function.
Change-Id: I9da3d3104ec25e2645e5770e6392bd46958da072
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Problem: if you create a hybrid Widgets and Quick Controls
application, you would need to use QApplication rather than
QGuiApplication. But in that case, the QQuickWindows would
never receive window activation events from QApplication.
And this causes problems for controls, since, for example,
the palettes in use there will never update upon activation
changes, and instead sometimes get stuck as e.g QPalette::Inactive
after application startup.
This patch will make sure that we send out activation events
also for QWindows that are not QWidgetWindows.
Pick-to: 6.3 6.2
Change-Id: I649f5c653081c0c5249f4faf28a7de2c92f17421
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Check DockWidgetArea permissions of QDockWidgetGroupWindows with single
dock widget. Obtain a dock widget's tab position from a dock widget
group window if it can't be established otherwise. Remove hardcoded
assumption that a dock widget is in the left dock. Both cases have lead
to inconsistent entries and dangling pointers in
QDockAreaLayoutInfo::item_list.
Remove warning: QMainWindowLayout::tabPosition called with out-of-bounds
value '0', which becomes obsolete by the fix.
Create a QDockWidgetGroup window prepered to become a floating tab,
whenever a dock widget is being hovered over. Store it in item_list so
it can be found and deleted when required.
No longer call e->ignore() after propagating close events to the first
dock widget and thus preventing others from receiving the event.
Add logging category qt.widgets.dockwidgets
Update dock widget autotest with tests to check the fixes mentioned:
plugging, unplugging, hiding, showing, closing and deleting.
Blackist closeAndDelete, floatingTabs test on macos, QEMU, arm, android
due to flaky isFloating() response after a dock widget has been closed
or plugged.
QSKIP dockPermissions and floatingTabs test on Windows due to mouse
simulation malfunction.
QSKIP hideAndShow test on Linux in case of xcb error (QTBUG-82059)
Fixes: QTBUG-99136
Pick-to: 6.3 6.2
Change-Id: Ibd353e0acc9831a0d67c9f682429ab46b94bdbb0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This shows we're lacking support for the 0b prefix, and, as it turns
out, there's a request for it.
Task-number: QTBUG-85002
Pick-to: 6.3
Change-Id: Ie201c84bf906a7e482b929301699ceb429b53c14
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
To complement the existing addSecs / MSecs / etc., add a function
that takes any compatible std::chrono::duration.
QTime also features similar functions, but it's also "unique" in that
it uses modular arithmetic (it wraps around in case of "overflow").
I'm not so sure that adding durations to a QTime object therefore
makes sense, and I'm not doing it in this patch.
[ChangeLog][QtCore][QDate] Added addDuration().
[ChangeLog][QtCore][QDateTime] Added addDuration().
Change-Id: I02aa37ff024d7f56fa976dc8f4f73523bdba8d94
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A previous commit Q_CORE_EXPORTed this class so it could be used in
tst_qevent. But we can also keep it Q_AUTOTEST_EXPORTed and make the
testing of the class subject to QT_BUILD_INTERNAL on the test side.
That's what this patch does.
Change-Id: I9bd5f80ada856b7db4b39dfb59b32bd825416c13
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
There's no advantage to them being inline: Absent de-virtualisation,
clone() is only supposed to be called through the vtable, and the copy
ctor is only supposed to be used in the implementation of clone().
And when the compiler de-virtualises, we don't want the code
duplication associated with inlining.
Enforce this by introducing new macros to hide the boilerplate.
This fixes missing out-of-line dtors in:
- QSinglePointEvent
- QApplicationStateChangeEvent
- QFutureCallOutEvent
Wrong covariant return in:
- QFutureCallOutEvent
And missing clone() reimplementations in:
- QCloseEvent
- QIconDragEvent
- QShowEvent
- QHideEvent
- QDragEnterEvent
- QDragLeaveEvent
While these don't carry extra data or members, a dynamic_cast of the
result of clone() as well as using the expected covariant return value
would fail:
QShowEvent *e = ~~~;
QShowEvent *e2 = e->clone(); // ERROR: converting QEvent* to QShowEvent*
Check that reimplementing clone() is binary compatible (covariant
returns may change the numerical pointer value returned, cf.
https://community.kde.org/Policies/Binary_Compatibility_Issues_With_C%2B%2B).
The copy-assignment operator stays inline for the time being, as the
goal is to = delete it in the future.
This patch covers, roughly, QtCore and QtGui.
[ChangeLog][QtGui][QEvent subclasses] Fixed missing clone()
reimplementations on QCloseEvent, QIconDragEvent, QShowEvent,
QHideEvent, QDragEnterEvent, and QDragLeaveEvent.
Task-number: QTBUG-45582
Task-number: QTBUG-97601
Change-Id: Ib8a0519dbe85a7a8da61050d48be338004dfa69a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In C++20, QDateTime is a direct equivalent of a sys_time<milliseconds>
time point. (Before, it might not have been, because system_clock before
C++20 was not guaranteed to be tracking Unix time, AKA UTC time without
leap seconds.) To be specific, sys_time<milliseconds> corresponds to
a QDateTime using the Qt::UTC timespec.
This patch:
1) adds named constructors taking time_points:
* a generic one taking any time_point convertible (via clock_cast) to
a system_clock (this obviously includes system_clock, but also e.g.
utc_clock)
* another couple taking local_time, interpreted as a duration from
1/1/1970 in local time.
2) adds a named constructor from zoned_time (i.e. a sys_time + a
timezone), that we can easily support via QTimeZone.
3) add conversion functions towards sys_time, matching the existing
to(M)SecsSinceEpoch() functions.
[ChangeLog][QtCore][QDateTime] QDateTime can now be constructed
from std::chrono::time_point objects (including local_time), as
well as from std::chrono::zoned_time objects. Moreover, they
can be converted to std::chrono::time_point using system_clock
as their clock.
Change-Id: Ic6409bde43bc3e745d9df6257e0a77157472352d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
std::chrono::year_month_day and related classes offer very
convenient to specify dates.
This patch adds implicit constructors to QDate to support this
convenience, e.g.:
// YYYY-MM-DD, DD-MM-YYYY, MM-DD-YYYY formats:
QDate d1 = 1985y / December / 8;
QDate d2 = 8d / December / 1985;
QDate d3 = December / 8d / 1985;
// Indexed weekday:
QDate d4 = 2000y / January / Monday[0];
QDate d5 = 2000y / January / Monday[last];
and so on.
These are all implemented using the conversion from the std
calendaring classes to sys_days. Conversions between sys_days
and QDate are also added, since they're basically "for free".
I don't expect "ordinary" users to stumble upon it, but it's
worthy mentioning that std::chrono::year *does* have a year
zero (hence, year_month_day in year 0 or below are offset
by one with the corresponding QDate). I've left a note
in the documentation.
[ChangeLog][QtCore][QDate] QDate (and therefore QDateTime)
is now constructible using the year/month/day/week classes
available in the std::chrono library. Moreover, it now
features conversions from and to std::chrono::sys_days.
Change-Id: I2a4f56423ac7d1469541cbb6a278a65b48878b4a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QAbstractProxyModel::headerData tries to do the "smart" thing and
map sections in the proxy to sections in the source. However there's
no "mapSectionToSource" virtual. Instead, to map horizontal headers, the
code builds a proxy index at row 0 and section N, maps it to the source,
and finds out which source column it gets mapped to. (Same story
for the vertical headers).
... in general this can obviously fail, say you've got a "horizontal
scrambling" proxy model, but in the common case this is OK.
Except, if the proxy is empty (e.g. 0 rows or columns). In this case,
it asks for an illegal index, and if you reimplemented index() yourself
(which you must, since it's a pure virtual in QAPM) and you do bounds
checking, you'll not be pleased at the result.
This turns out to be a massive API liability. To fix this somehow properly,
we can decide that empty models don't get the section remapped (easy).
Less easy is the fact that, when the model does get some data, we have to
emit headerDataChanged() otherwise the views will get broken. So add
this logic too.
Note that QAPM does not normally forward any source model's signal -- a
subclass has to connect to them and handle them explicitly. That's
*another* API liability, all over the place -- data(), headerData(),
flags(), etc.
What I mean by this is that one can create a valid QAPM (by implementing
its pure virtuals) that however is immediately broken by the convenience
that QAPM provides for the rest (data(), headerData(), etc.).
This commit doesn't try and change this in any way, but I'm less and
less convinced of the usefulness of QAPM in its current shape.
Change-Id: I45a8c2139f2c1917ffbf429910fdb92f005f4feb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: David Faure <david.faure@kdab.com>
QDateTime represents a specific point in time, so arithmetic
with durations makes perfect sense.
Moreover, we can finally equip QDateTime with a subtraction
operator, to calculate the duration between two QDateTime
objects.
[ChangeLog][QtCore][QDateTime] QDateTime now supports arithmetic
between QDateTime objects and std::chrono::duration objects.
A duration can be added to or subtracted from a QDateTime, yielding
another QDateTime; and two QDateTime objects can be subtracted
from each other, yielding the duration between them.
Change-Id: I656419f3bb9418c49f0e2fd0800c3dbaaf6aff32
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A time_zone represents a timezone identified by its IANA ID. This
allows for a straightforward conversion to QTimeZone.
[ChangeLog][QtCore][QTimeZone] QTimeZone can now be constructed
from a std::chrono::time_zone pointer.
Change-Id: I093d9fc2e989475d30730a9dcdef491903a2aeb2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These particular testcases request huge buffers from malloc() .This is
intentional and the test expects malloc() to return NULL. Address
sanitizer catches this and considers it a problem.
Could also be skipped in runtime by setting the environment variable:
ASAN_OPTIONS=allocator_may_return_null=1
Task-number: QTBUG-89400
Change-Id: Id3a9b586be9c0bad4a007e1731f2bc1a879cc76e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The TLS v1.0 and v1.1 enums are all deprecated since 6.3. At the same
time, the test requires their use, because none of the peers seeem to
implement TLS v1.2, yet (cf. e.g. QTQAINFRA-4499).
Fix by copying the relevant enum values into global variables and
using those. This is a selective way to deal with the issue. The use
of the enums is so widespread in the test that the alternative would
have been to globally suppress deprecation warnings, which, however,
may suppress warnings we may actually want to fix.
Pick-to: 6.3
Change-Id: I4186be72209527fc404f3ba0a5a15f9719c64698
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Ensure that it's safe to call readAllStandardError()
when process channel mode is set to MergedChannels.
Pick-to: 6.3 6.3.0
Task-number: QTBUG-102177
Task-number: QTCREATORBUG-27196
Change-Id: I01073255d9347dee4654d602802a12d341372b73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
because the old xcb_randr_monitor_info_t was invalid very often
during update.
Pick-to: 6.3
Change-Id: I8c0bda93bde4e816fc98cde1a7205c6369ab39e1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Before the patch we tried to create a java Locale object by passing the
human-readable language, territory and variant strings. However, the
Locale constructor accepts ISO-defined codes.
Fix it by using a factory method Locale.forLanguageTag() [0] that
constructs a Java Locale object based on BCP 47 tag.
[0]: https://developer.android.com/reference/java/util/Locale#forLanguageTag(java.lang.String)
Fixes: QTBUG-101460
Pick-to: 6.3 6.2 5.15
Change-Id: If414c66cf0e5b7e8299ffc3a6038b6f9eb79d5ec
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
When the date-time string falls in a spring-forward (so is invalid)
and one of the fields of the parsed string doesn't match the format
it's meant to (e.g. a single-digit seconds field when format ss was
specified), a check that the current fall-back date-time is between
the minimum and maximum for the parser object failed, triggering an
assertion.
In any case, an invalid default-value wasn't useful to the code that
parsed a single section of the date-time string, so brute-force the
current value to a valid date-time (when possible) using the usual
round-trip via milliseconds since the epoch.
Added the test-case which first revealed the problem, plus a couple
more informed by it, to exercise the same code-paths with fewer things
failing.
Fixes: QTBUG-102199
Pick-to: 6.3 6.2 5.15
Change-Id: I658308614505ef25f4c97d0de6148acb54a65a0f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use of QSKIP() means the whole test is skipped; when all applicable
parts of a test have passed and some part of the test is inapplicable,
merely report that it is skipped, rather than discarding the PASS for
all the parts that do work.
In the process, eliminate a spurious layer of indentation; the earlier
test only needed a scope to contain its declaration, a goal adequately
achieved by the scope of the if constexpr block.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: Ie4790a24ebf49a7f3035ffad42d78450e1560832
Reviewed-by: Tatiana Borisova <tatiana.borisova@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... a leftover from the initial patch-set not required in the one that
merged.
Change-Id: I0c5e94d8a0409faf4f7f9a354e98e239f7186da3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Most likely related to qemu network configuration which cannot be
modified. Reason is that in QNX there is tool which can be controlled
qemu configuration, and it does not provide options for more finer
grade network configuration.
Pick-to: 6.2 6.3
Task-number: QTBUG-101274
Change-Id: I660466e36252e902a2314fb3f4988c531cda9214
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][QtCore] Added literal operators for _s and _ba for QString
and QByteArray respectively in the Qt::Literals::StringLiterals
namespace.
Task-number: QTBUG-101408
Change-Id: I5cd4e7f36f614ea805cfecc27b91c5d981cd3794
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
When calling QHash::reserve(), or when creating the
internal QHashPrivate::Data structure, the value 0
for the size parameter is reserved for performing
the squeeze operation.
However commit 8a984ab772
broke it, by using the 0 value in QHashPrivate::Data
constructors as a mark that no resizing needs to be done.
This patch reverts the problematic commit (also applying
some later fixes to the code), and adds the missing
tests for Q[Multi]Hash::squeeze().
Pick-to: 6.3 6.2
Change-Id: Id644df7b2beb008e6a37b2c89b709adfbd893e25
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Calling Q[Multi]Hash::reserve(n) when n is much smaller than the
current amount of elements in the hash, could result in an infinite
loop, because at some point the algorithm could not find a free bucket
for the element.
Fixing it by returning early if the new desired capacity is less than
current.
Fixes: QTBUG-102067
Pick-to: 6.3 6.2
Change-Id: I38ef0b2168c4e2a317eedf91b2155b1fdffb1c27
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Different platforms and drivers hae different defaults, so make sure
to request what we need.
Pick-to: 6.3 6.2
Change-Id: I54ae6e0770fea53fbf59c86d7e55aa5897292b67
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
QList and QString had them, so add them to QByteArray and
QVarLengthArray, too.
In the QVLA case, we need to jump though a hoop or two to avoid having
to duplicate all the reallocation logic. Nothing a few template tricks
cannot solve.
[ChangeLog][QtCore][QByteArray] Added resize(n, ch) overload.
[ChangeLog][QtCore][QVarLengthArray] Added resize(n, v) overload.
Fixes: QTBUG-102270
Change-Id: I0d281ae5b574f440f682e4a62427b434dcf5b687
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On 32-bit platforms, the range of qsizetype is smaller than the range
of the qint64 used as a parameter in seek().
When seek()ing beyond the current buffer's size, the old code relied
on a write() to fill the gap with NUL bytes. This has two problems:
First, this may allocate a huge amount of memory just to find that it
cannot write that much, possibly even taking the program down when the
allocation in the QByteArray ctor fails, instead of returning false from
seek().
Second, the QByteArray ctor to which we pass the gapSize only takes
qsizetype, not qint64, so we were writing data of size gapSize mod
(INT_MAX+1) on 32-bit platforms, which may succeed, just to find that
that wasn't the number of bytes we expected to be written. By that
time, however, the internal buffer has already been enlarged.
Fix by checking whether the desired seek position is within the limits
that QByteArray can contain early on, before attempting to construct
such a large QByteArray.
[ChangeLog][QtCore][QBuffer] Fixed silent data corruption on 32-bit
platforms when seek() fails due to position > INT_MAX.
Pick-to: 6.3 6.2 5.15
Fixes: QTBUG-102274
Change-Id: Ib63cef7e7e61ef8101a5f056c7b2198bb7baa228
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_qmessagebox was disabled because it crashed.
It does not any more. Now it hangs, which
is a new problem.
Fixes: QTBUG-87671
Task-number: QTBUG-101217
Pick-to: 6.2 6.3
Change-Id: Iec15cf82a4112ee79182ec091622e40147bd3e7f
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
We want to enable gaining access to the underlying resource(s) by
inspecting a QRhiRenderTarget. This is not currently possible for
swapchains since there is nothing that references the actual
QRhiSwapChain. To clean this up, make an explicit, new
QRhiSwapChainRenderTarget subclass. Thus the logic already used in a
couple of places to examine the resources attached to a
QRhiTextureRenderTarget can now work with swapchain render targets too,
by branching based on the resourceType().
This eliminates the somewhat odd setup where a "RenderTarget" resource
is QRhiRenderTarget corresponding (but not exposing!) a swapchain,
whereas a "TextureRenderTarget" is a QRhiTextureRenderTarget which
is a subclass of QRhiRenderTarget. Now we correctly have an (abstract)
base and two subclasses, one for each type of render targets.
Besides, it allows us to clean up the oddly named
Q...ReferenceRenderTarget classes in the backends, which initially tried
to indicate that this "render target" merely references (or, in
practice, is) a swapchain. We can now have a nice and symmetrical
Q...SwapChainRenderTarget and Q...TextureRenderTarget naming scheme.
Change-Id: Ib07e9be99a316eec67b94de0860e08f5f4638959
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
QNX tests are run under QEMU so have the same problem as Ubuntu.
Pick-to: 6.2 6.3
Task-number: QTBUG-100928
Change-Id: Id7c7639b743062c777502e2ba8b28f9bb18deb19
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
In Qt 6, QByteArray can hold more than two GiB of data on 64-bit
platforms, so QBuffer should be able to handle writes of more than two
GiB, too. But the implementation didn't check for overflow and held
sizes in int variables, so it happily reported success but wrote data
only mod INT_MAX.
Fix by carefully avoiding overflow and using size variables of proper
type.
[ChangeLog][QtCore][QBuffer] Fixed silent data truncation when writing
more than two GiB at once on 64-bit platforms.
Pick-to: 6.3 6.2
Fixes: QTBUG-102171
Change-Id: Ib666f9f7db24495b4ed64191a48b35edc410f7e9
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This reverts commit b39d3cfe30.
Reason for revert: the test fails in dev again
Task-number: QTBUG-87404
Change-Id: Icc51e36e037e9c7e8154266def129dd8ad412775
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
To allow other cases to run while finding the reason. Most of these
cases fail only on CI and not locally.
Pick-to: 6.3 6.2
Task-number: QTBUG-102043
Change-Id: Ib552ab00b4232f6aabdf85acf050633251d9e71d
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Update docs and add tests.
[ChangeLog][QtCore] Documented existing support for 'F' format when
converting floating-point numbers to strings in QLocale::toString(),
hence equally for QString's floating-point formatting. Previously it
was supported but the documentation neglected to mention it; it only
differs from 'f' for infinities and NaN.
Change-Id: Ic946c0f7b9e86fdf512daa3124bea57fc664b34b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The testing of infinity and NaN somewhat duplicated existing tests in
tst_QNumeric and, in any case, belongs there.
Change-Id: I6b5d1ff9767daf8e4bbe0025d3efab3d74ed35de
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Replaces 0, 0.0, 1, 1.0 and 2.0 with zero, one and two constants of
the templated floating-point type, to avoid type-conversions which
might have meant the test only checked doubles, or similar.
Change-Id: Id9d4488f0cc7226b5b8958d2a204a76fe5ae469d
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Use the modern "portable" _clearfp() and _controlfp(), that work
regardless of the hardware MS is running on, rather than the
x86-specific _clear87() and _control87(); and move some defines into
the #if-ery context in which they're used, rather than defining them
regardless of whether they're used.
Change-Id: I13abf2c85525b1182b99bc2c366aadd6b5fc656f
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Instead of QSKIPing the whole test, ignoring what was already tested
Change-Id: Iced928ce1bce92b447c8698a9942973cb78b6c15
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Removed "explicit" keyword from constructors taking
(const char *, qsizetype) and (const char *, const char *).
Switched to using brace initialization for creating QLatin1StringView
in QtCore.
[ChangeLog][QtCore][QLatin1StringView] The (const char *, qsizetype)
and (const char *, const char *) constructors are no longer explicit.
Change-Id: I4f6760692e4df60fe4231e86a25f6ea03cd1bf82
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
When comiling with ubsan, GCC is being too restrictive and ignores that
'static constexpr char []' can never be nullptr. It tries to evaluate
the comparison with nullptr, and fails with:
error: ‘(((const char*)(& hello)) == 0)’ is not a constant
Disable the checks when compiling with GCC.
Fixes: QTBUG-101307
Pick-to: 6.3 6.2
Change-Id: I8322bb7cb326e06cd03b8b107c46a494c825087b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We have test cases that call setFont without a specified weight, in
which case we would end up parsing an empty string into a number,
giving a weight of 0. This weight would in turn result in the
thinnest font on the system, which presumably was not the intent.
We now use default sizes and weights (similar to the default QFont
constructor arguments) if we're missing those arguments to setFont.
Pick-to: 6.2 6.3 5.15
Change-Id: I5a96f08cfa1b9e4f1de5edee6bf69ddd46f0ce92
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Update a QDateTime benchmark to use QDate::startOfDay() when setting
up its lists of date-times in helper functions, and to use noon as the
moment in the day in a creation test. Also move creation of a QTime
outside the loop: we're testing speed of creation of QDateTime here,
not QTime (and were already using the most trivial QTime constructor).
Change-Id: I26bf3369aae84a802ab03791f7341e107fede87c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The accessibility code for notifying focus changes related to a
table/tree view was iterating over all items to find the focused one,
which for a very large number of items could cause a major slowdown
and UI freeze. This patch avoids the issue by removing the loop and
implementing the focusChild() method in the table/tree accessibility
classes.
Fixes: QTBUG-100997
Pick-to: 6.2 6.3 5.15
Change-Id: I04c847a5e65223b7a93ab82363feb32e1ebab9f3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Accessibility tests were not being built on Windows as they were
depending on a WindowsUIAutomationSupport internal module that no
longer exists, as the UI Automation support classes are now in QtGui.
The patch also fixes a test that was calculating widget geometry
incorrectly on high DPI screens.
Pick-to: 6.2 6.3
Change-Id: Iefed0f6d147853484dfab4b16838b9088fd32dcf
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Two things are done here:
- use showNormal() instead of show() to get an expected widget size.
- skip the test if HighDPI scaling is enabled with non-integer scaling
factor, because there can be rounding errors.
Fixes: QTBUG-87390
Pick-to: 6.3 6.2
Change-Id: I653a17bac2142838b03a328e1629582384b6c7b3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
And replace them with more descriptive versions
Change-Id: I3d5256072a5bbe0919a08b800877aa9b6a305a0b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Two methods of the private class used to take a QByteArray with from
and to indices into it, for where to start and stop a scan. Now that
they take a QByteArrayView, those parameters can be used by the caller
to shorten the view to the desired portion.
Change-Id: Id1586afb87a9e8a189b69e485278375ff504fb7b
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Skip the crashing case temporarily to allow other tests to run
while finding a fix.
Pick-to: 6.2 6.3
Task-number: QTBUG-100470
Task-number: QTBUG-102043
Change-Id: I8b16f95e5c66b95cc9959494b5317d39d58194e6
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Adds docker support and makes it no longer skip the whole test
if there is no docker or network server.
Pick-to: 6.2 6.3
Change-Id: Ie98496df338a804d5c9842cce372e3410fdf9990
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Currently test relies solely for external test server. This makes it
not possible to run test successfully with environment where docker is
used.
Pick-to: 6.2 6.3
Change-Id: I51f4f48a80c1be8dd24359fe24d9cbfd471d2195
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Android uses its own implementation of QNetworkProxyFactory, so the
test of a generic implementation will never be working there. The
"http_proxy" environment variable is simply ignored in Android's
implementation.
Fixes: QTBUG-87385
Pick-to: 6.3 6.2
Change-Id: I3c24e3481b70872d332310aa86c68adad9c2b7e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
- Use QT_ANDROID_EXTRA_LIBS to correctly deploy libraries on Android.
- Update the test code to use application libraries directory
on Android.
This allows to enable the test for Android in CMakeLists.txt
Task-number: QTBUG-87438
Pick-to: 6.3 6.2
Change-Id: Ib74da036472320736888052b63a45ca50431de48
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
On Android we demand the libraries to always start with "lib" and
end with ".so" extension. Also Android does not support versioned
libraries.
This patch updates CMakeLists.txt to fulfill these requirements,
and also omits some unsupported test cases.
This allows to enable this test for Android in CMakeLists.txt
Task-number: QTBUG-87438
Pick-to: 6.3 6.2
Change-Id: Iec30acdefe00c471acc7139cd255b3389e31d22b
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Previously, only the first B?XFAIL would be reported, all others would
be discarded. Furthermore, if a B?XFAIL had happened, B?PASS was also
not reported, since the B?XFAIL served as test line. However, if the
B?XFAIL was followed by a SKIP, B?XPASS or B?FAIL, these were reported
as normal, producing exactly the kind of duplicated test line that the
skipping of B?PASS was meant to supply.
So change B?XFAIL to be reported among the messages, but retain the
TODO annotation of the first on the test line of a subsequent B?PASS,
if nothing more drastic happens in the mean time. So now more than one
B?XFAIL can be reported, the test is still marked as a TODO and we
don't get duplicate test lines for a subsequent non-passing result.
This replaces the bool m_wasExpectedFail member with a QTestCharBuffer
m_firstExpectedFail that records the first XFAIL's TODO line (so its
isEmpty() fully replaces m_wasExpectedFail).
Previously, the at/file/line information for a B?XFail would be
supplied as top-level keys in the YAML block for a "Pass" reported as
not ok due to the XFail, as this location information is now part of
the B?XFail's message in the extensions/messages block. Duplicating
the first B?XFail's location at top level would add complexity and is
arguably misleading, as the test result is really a pass (after
ignoring known issues), and the location of the pass is indeterminate
(nominally the end of the test function, but actually also after the
cleanup() call for this test, when relevant), which is why a Pass has
no location information.
Task-number: QTBUG-96844
Change-Id: Ib3f24f56266ff49bf3bc9759ac8263ac69a62130
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In the process, split it from its comments block and don't bother with
a YAML block if it would only have contained comments.
Task-number: QTBUG-96844
Change-Id: I08c20f796252bb270ba9caa4c055cdcc0843a88b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The ASN.1 parser for a date-time had to check the date-time string was
all digits to catch the case of a sign in the month field, which used
to be accepted when it should not be. That bug has now been fixed, so
remove the work-around and add a second date-time test-case, renaming
(and modernising) the existing one for consistency.
Task-number: QTBUG-84349
Change-Id: I649c5129312b6865af08b22ba6893cb4e29243f8
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Commit a35a7fcb5a introduced the usage
of insets to correctly take into account the default Android status bars
and other reserved regions.
However in practice that does not work as expected - the bottom inset
is always reported to be non-zero, even when fullscreen mode is enabled.
To fix the issue, FLAG_FULLSCREEN is explicitly checked before applying
the insets.
Fixes: QTBUG-99624
Pick-to: 6.3 6.2
Change-Id: I8b25f0b06447cd452c42ef072493e3137e25f38b
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Fix some obvious issues, QSKIP or blacklist other problems.
This does not fix all the test failures, but allows to enable most of
the test cases, so that we could catch future regressions.
Task-number: QTBUG-87668
Pick-to: 6.3 6.2
Change-Id: I1ed0b476d4ac55c658c572cfa1379fcdc6137ee8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Do not try to properly specify a path to an external syslocale app,
because the related test can't be executed on Android anyway.
This fixes a failure in initTestCase() and allows to unblock other
test-cases.
Also skip systemLocale() test, because Android platform plugin already
creates a custom QSystemLocale instance, so a hack with MySystemLocale
does not work.
As a drive-by: simplify the #ifery in initTestCase() and remove an
unused second parameter of QSKIP() in emptyCtor_data().
Fixes: QTBUG-87414
Pick-to: 6.3 6.2
Change-Id: Iefc587062362469856fdca77f9ec9d96f5552e45
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The tests started failing for some reason, so blacklist them to
unblock the CI.
Task-number: QTBUG-102095
Task-number: QTBUG-102096
Change-Id: I3e0667581bb1a9fd08dedcdab08878b1f738ac92
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When producing a diagnostics block, include the file and line
information, if we have it, to describe it. This presently only adds
this information for skip, but could in principle do the same for a
B?XPass.
Task-number: QTBUG-96844
Change-Id: I6cc375d98e2369eba262010f9c2dfbcba931a6f1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Our TAP output was delivering messages as comments before the test
line, where TAP clearly expects the details of a test to follow its
test line. Version 13 provides a YAML block to deliver diagnostics and
encourages use of this, so accumulate our messages in a
QTestCharBuffer instead of emitting them one by one.
However, messages produced after a test has produced its test line
belong to that test, but are too late to be included in its
diagnostics block, so should be emitted immediately as before, albeit
now with a type prefix. This at least separates such messages, from
the end of one test, from messages produced early in the next.
In the process, add a type-prefix to each, to make clear what type of
message it was. Since the Yamlish supported by TAP consumers doesn't
support a way to have many messages, use the extensions: top-level
hash tag with a messages: sub-tag to gather our messages as a list.
(This expands at least one expected output file significantly and
substantially rewrites some others.)
Add methods to QTestCharBuffer, and a helper function, to support this.
Task-number: QTBUG-96844
Change-Id: If44a33da5879ed1670ef0980042599afd516f9d2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Now when 71b3d18ea7 is merged,
we can re-enable the previously skipped tests, as they do
not crash anymore.
Task-number: QTBUG-101423
Task-number: QTBUG-101321
Task-number: QTBUG-87417
Pick-to: 6.3 6.2
Change-Id: I6b4b3619b0af5e48b5e92b514bc0ab6586a76d51
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The test was failing because test data was not provided correctly.
That was fixed in 4aea86f5e8 but the
test was never unblacklisted.
Fixes: QTBUG-87418
Pick-to: 6.3 6.2
Change-Id: Ibef7dcfaf59ef50f90d6538a562d03af17f065e0
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Needed for QNX, don't be overly specific with XcbUnix.
Pick-to: 6.3 6.2
Change-Id: I240313bc48d9d81d1f18f27ee11f7c9352e3e452
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
- Use QT_ANDROID_EXTRA_PLUGINS to specify a correct plugins directory
- Update plugin names on Android to match the expected format
- Add explicit dependency on the plugins, so that they always get built
and included in the APK
- Update the test code to respect the fact that plugins are packed
differently on Android.
All these steps allow to enable this test for Android in CMakeLists.txt
Task-number: QTBUG-87438
Pick-to: 6.3 6.2
Change-Id: I09e389c761688cea216d8922b94ea3a2600f7a67
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
- Use QT_ANDROID_EXTRA_LIBS to correctly deploy libraries on Android.
- Update the test code to use the application libraries directory
instead of resources on Android.
This allows to enable the test for Android in CMakeLists.txt
Task-number: QTBUG-87438
Pick-to: 6.3 6.2
Change-Id: I2f6d2d4f3ab3872cf7d7fad1668b5c2c3eef3aad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The test will never pass on Android because it's missing permissions
to read root filesystem.
Skip the test instead of blacklisting it.
Fixes: QTBUG-87427
Pick-to: 6.3 6.2
Change-Id: Ib57a49b1d2bc4204f8aa2c3028c7220d23ff2a91
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Skip a test that uses QProcess instead of blacklisting it.
Re-enable this test in CMakeLists.txt, so that it can be checked
in the CI.
Fixes: QTBUG-87431
Pick-to: 6.3 6.2
Change-Id: If8a4acd60735f355dffa60c28b8d07695ee33ec8
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
For x86_32 the alignment of QBasicAtomicInteger<8 bytes> is not
equal to the alignment of TypeInStruct<8 bytes>, so do not perform
the check.
Fixes: QTBUG-87422
Pick-to: 6.3 6.2
Change-Id: I6e6c6cb7b2b7195e430d6a6991004bcfce16d4cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It relied on the set(QT_REPO_MODULE_VERSION ...) line being the first
thing in the file. It no longer is, and the variable is referenced in
an earlier condition.
Change-Id: I2bd2abd2a5680782ddd61f4bf4a4a3265b444d52
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Copying lot of testdata over NFS to qemu image start failing with
errors of "No space left on device" even there is enough space left.
Pick-to: 6.2 6.3
Change-Id: I2a417ed5b8c131e0a1f68c37b1fc2446ea013304
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The zone name was reported if isValid() failed, but not if
isTimeZoneIdAvailable(), where it also proved useful in uncovering
ICU's use of over-long zone name components.
Change-Id: I4b3b65b1a4a338b638c01fc7ad47294118ee0efc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The exception was previously limited to Android, but I now find that
ICU has the same over-long names; it seems likely that's where Android
gets them. Also update the link to the theory page from the TZ DB, as
it now has an official home on www.iana.org.
Task-number: QTBUG-99747
Pick-to: 6.3 6.2
Change-Id: I9af67426d15609dfaf5f335405ceb1218fcf40ff
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If the active QWidget gets destroyed, then QWidgetWindow::focusObject
will return nullptr. If then no other object takes focus, then we'd
never emit change signals, and QGuiApplication's _q_updateFocusObject
(which then informs the input context and emits signals) didn't get
called. This left the input context with a dangling focus object
pointer, which resulted in crashes.
If the QWidget clears its focus, but the corresponding window doesn't
know that it had focus, then fall back to the widget's focus widget
to see if we have a change in focus, so that signals get emitted.
Add a test case that shows that we didn't call _q_updateFocusObject
by counting emissions of the QGuiApplication::focusObjectChanged
signal, which we emit in this function. The signal is emitted more
than once both when showing a widget, and now also when destroying
a widget that has a focus child. The former is a previous issue,
the latter is an improvement to not emitting the signal at all.
Pick-to: 6.3 6.2
Fixes: QTBUG-101423
Fixes: QTBUG-101321
Change-Id: Ib96a397211d442f52ce795a3eebd055a0ef51b0d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If the QPromise is being destroyed, we should signal the associated
futures to stop waiting. No matter in which state the promise is, if
it's not finished, we should always cancel to avoid infinite waits.
This is also what docs state:
"The promise implicitly transitions to a canceled state on destruction
unless finish() is called beforehand by the user."
Fixes: QTBUG-101284
Pick-to: 6.3 6.2
Change-Id: I65ebfefe03b79b41afacda78a4f49938c54d8b37
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Currently test relies solely for external test server. This makes it
not possible to run test successfully with environment where docker is
used.
Pick-to: 6.2 6.3
Change-Id: Idf7e99c19ab630065b651f2f6d957311f45f0db7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Currently test relies solely for external test server. This makes it
not possible to run test successfully with environment where docker is
used.
Pick-to: 6.2 6.3
Change-Id: If716921ce6ceea1ced2d0d7025c6e9768b4ed7a7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Only (straightforwardly) implementable with modern APIs, and
only really exists to handle special platform cases, such as
when a video framework gives us a D3D texture array with
D3D11_BIND_DECODER | D3D11_BIND_SHADER_RESOURCE
which is only possible to use as a shader resource if the SRV
selects a single array layer.
Has no effect on the normal usage of texture arrays, where all
array layers are exposed, and it is the shader that selects the
layer when sampling or loading via the sampler2DArray. That
continues to be the standard way to work with texture arrays.
Change-Id: I0a656b605da21f50239b38abb83067e0208c1dbe
Reviewed-by: Piotr Srebrny <piotr.srebrny@qt.io>
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Don't mix unsigned and signed types in comparisons.
Pick-to: 6.3
Change-Id: Ia4ba9c114177425a21cadc8cafe8179928315a5d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
After cbf1b4bc60bca3994b8f8685ee922e53a6b4eed2 the selected item got
deselected on Ctrl+Press, which made Ctrl+dragging a selected item
impossible.
Only deselect on Ctrl+Release. Add scenario to existing test case,
and update the documentation to clarify the properties involved, and
to point out that the event parameter might be nullptr.
Fixes: QTBUG-101647
Pick-to: 6.3 6.2
Change-Id: I749b1cb1a0a311f5c1d4c333984716f05f2c90b5
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Volker Enderlein <volker.enderlein@ifm-chemnitz.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
To enable using `ninja tst_qlocalsocket_check` and have the
helper (re)built as part of the dependencies.
Pick-to: 6.3 6.2
Change-Id: I8703c4202a97606991d1cffe0d0f8e909a51f12f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Skip some of the obviously failing QCompleter-related tests instead of
blacklisting them.
Skip a test that causes a crash.
This allows to re-enable this test in CMakeLists.txt for Android.
Task-number: QTBUG-87417
Pick-to: 6.3 6.2
Change-Id: Ie7ee708df8ceddf117689e8ac749850ba86e8816
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This test doesn't fail on Android anymore, so don't use QEXPECT_FAIL.
Pick-to: 6.2 6.3
Task-number: QTBUG-100470
Fixes: QTBUG-69242
Change-Id: I5a96566728a486c701656aede1818e7ab7f019be
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The test is very flaky on Windows 11. Make sure that we have a secondary
window to close before proceeding, and wait for fade effects to finish,
otherwise we might never get the leave event from the windowing system.
Also replace a QVERIFY(qWaitFor) construct with a simple QTRY_VERIFY.
With these changes, a local run of 20 repeats of this test on a stressed
VM improves from 75% to 100%.
Pick-to: 6.3 6.2
Fixes: QTBUG-98477
Change-Id: Iedcc175b336e3cab23817b954aba1736d02f1b9d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When a B?Fail's description doesn't match the QVERIFY/QCOMPARE
regexes, it got output as a comment in the YAML block after the test
line had already reported it as a TODO comment. An empty description
would also have lead to an empty comment in the YAML block. Condition
this fallback output case on there being a description that hasn't yet
been reported in the test line.
Task-number: QTBUG-96844
Change-Id: Id7fe81d26ddb01da3d8003ada8fa590a5e1a166f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In all places but one they were treated the same; fix that last one to
match the rest. This removes one line from the YAML block for each
blacklisted XFail test; in each case, this message duplicates the one
on its "not ok ... # TODO..." test line.
Change-Id: Iff2028afccd979db7f2c84e85d1b78541900008e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Network autotests cannot connect to services on docker containers from
QNX qemu without all ports explicitly defined (both host and container)
side.
Pick-to: 6.2 6.3
Task-number: QTQAINFRA-4684
Change-Id: Iba44cfa17d42d43ecec3e29985e404f75d5fc232
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
In some situation we want to notify even if the value didn't change.
Task-number: QTBUG-101771
Pick-to: 6.2 6.3
Change-Id: I7d82a9f6e0f7d5eb48065e3f428b814939181ea8
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Don't use deprecated methods in tests, and don't refer to them in
documentation.
Change-Id: I110480742d9a7b9b0a2e194e3fe610208c1e07da
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This has performance benefits when doing comparisons.
The check is only performed at compile time.
Task-number: QTBUG-101014
Change-Id: I55694b045fe5e75d9671d0a3a70c80d998cf98c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Adapt to changes in QWidget::addAction API from 08e4d2db08.
Pick-to: 6.3
Change-Id: If6e05b47de88cf55070238f08b96586b855cc5c1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This was lost when QtCore, QtGui and QtWidgets were split up. Restored
now via a virtual function on QObjectPrivate.
Chose to return std::string instead of QString or QByteArray because
its SSO is usually sufficient to hold these flag strings.
[ChangeLog][QtCore][QObject] Restored printing of Qt3-style
information from dumpObjectTree().
[ChangeLog][QtWidgets][QWidget] Restored printing of Qt3-style
information from QWidget::dumpObjectTree().
Fixes: QTBUG-101732
Change-Id: I39ff5728ea5f5abbdbf81b5d7e13b8d16b6ee8b7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
... in preparation for replacing the QString keys in the public API
with QAnyStringView ones.
This removes the "important optimization" that avoids a detach in the
common case where the input is the same as the output of
normalization. But that optimization is beside the point, because it
trades a memory allocation avoided in the library for O(N) allocations
inserted into user code for each call to QSettings::value(), the vast
majority of which are calls with string literals.
With the public interface ported to QAnyStringView in the follow-up
patch, we can then internally optimize memory allocations _in a central
place_ (e.g. by returning std::u16string or QVarLengthArray<QChar> from
normalizeKey() instead of QString). But first we need to get rid of all
the unwarranted allocations in user code.
Change-Id: I45fc83d972c552a220c9c29508001d3f172e1162
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Selection change handlers of the items might call a method that
implicitly recreates the selectedItems QSet, which then invalidates
the iterators of the ranged for loop, resulting in crashes.
Iterate over a copy of the set instead.
Add a test case that crashen without the fix.
Fixes: QTBUG-101651
Pick-to: 6.3 6.2
Change-Id: I6da6f4043fe1906b0186931a37283f635cb5a404
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Add move constructor and move assignment operator.
To allow for the the change to be implemented QTemporaryDir, the
internal d_ptr was modified from a QScopedPointer, which is not movable,
to a raw pointer.
Add member + free swap implementations.
Add tests.
[ChangeLog][QtCore][QTemporaryDir] Enabled move semantics.
Change-Id: I9f196a77c70b4ca0b7f0c06505d00fdd87a9785c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
ClipboardManager didn't have any APIs to clear clipboard data before
API level 28.
As a workaround an empty Intent with MIMETYPE_UNKNOWN is created and
inserted into the clipboard for lower API levels.
This makes the QApplication::clipboard()->clear() method work more or
less as expected.
This allows to unblacklist tst_QPlainTextEdit::copyAvailable().
Task-number: QTBUG-87423
Task-number: QTBUG-89402
Pick-to: 6.3 6.2
Change-Id: I454376199cf3b8eed0fa2ecf2f85b87f40892280
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Because setObjectName() now takes a QAnyStringView, passing C string
literals is much more efficient than using QString::fromUtf8().
This patch only deals with setObjectName() as a known property,
probably from a name attribute. If the objectName property is set by a
<property> element (or so I assume), we still emit a
QString::fromUtf8(). Detecting objectName there would be too much
magic.
Besides, I haven't been able to find why sometimes there's a second
setObjectName call right after the first, when in the XML it seems all
kosher (name attribute and objectName <property> agreeing on the
content).
Change-Id: Icf07bad841ac735a9c744bbd955428ba15758089
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Parent window in sizeLessWindow test was using software pipeline at
least on webOS, causing a QCRITICAL() exit when the test was executed.
Fixes: QTBUG-101869
Pick-to: 6.3
Change-Id: Ie8cc0ea0b6a09729475389be44197e01a45b217f
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
There is no reason to allow relock() on a locked locker, or unlock()
or an unlocked one, just like we don't allow that on a plain mutex
to begin with. The docs already said that e.g. relock() locks an
_unlocked_ locker.
[ChangeLog][QtCore][QMutexLocker] QMutexLocker allowed relock() and
unlock() on an already closed (resp. open) locker object. These
semantics have always been undocumented and are now unsupported
(in both cases they yield undefined behavior.)
Change-Id: Id5f67beb5dc30d6435dae88a3085fba93ec7d96e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Percent-decoding was previously only present as a static method taking
a QBA parameter; it might as well be an instance method of that
parameter. Change most QBA tests to use it rather the static method.
[ChangeLog][QtCore][QByteArray] percentDecoded() is now available as
an instance method of the byte array to be decoded, equivalent to the
static QByteArray::fromPercentEncoding().
Change-Id: I982101c44bdac5cc4041e85598d52ac101d38fa1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The class is similar to unique_lock in that it allows for unlocking
and relocking. Since the locked state is tracked by QMutexLocker itself,
it's trivial to make it movable.
[ChangeLog][QtCore][QMutexLocker] The class is now movable.
Change-Id: I534044f8024575e996c12efb2236761d493798a3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Connecting to nullptr, or connecting to a non-signal PMF, would result
in a QFuture which would never finish. Catch these cases and handle
them.
Windows+MSVC for some reason fails the test. I can't entirely understand
why, so I've marked it as XFAIL, with QTBUG-101761 to track it.
Change-Id: I314980e7e9b7156d8cddd3b33d5cbf1d0bcd6116
Pick-to: 6.2 6.3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Use VERBATIM option to prepare the correct command line for the
add_custom_command. This especially sensitive when using build
directories with names containing special symbols, that cannot be
handled by shell correctly.
Change-Id: I51d7041cb806411135fd59bf6273c04a3c695443
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QString already has a localeAwareCompare(QStringView, QStringView)
static method. Use it in QStringView::localeAwareCompare(QStringView).
[ChangeLog][QtCore][QStringView] Added
QStringView::localeAwareCompare().
Task-number: QTBUG-98431
Change-Id: Iec3865a5439d9fb653cc1150da21042186bdee98
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
On Wayland, there is no protocol to do it yet.
Task-number: QTBUG-100792
Task-number: QTBUG-101145
Change-Id: Id72625a8161359111a2d0f43f3215e787778ba6b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Remove some kludgy, redundant and never used functionality for setting
project and test case names, as it also hindered overriding those
properties at runtime.
Pick-to: 6.3 6.2
Change-Id: Ibef7d7d0cb5fc1e462752f2ba2db76cc088dbd48
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In Qt 7 32-bit builds, the ShortData will be larger than the
d-pointer.
So don't swap() the d-pointer, but a) delegate to Data to swap itself
and b) swap the ShortData there, adding a static_assert in the .cpp
file that triggers when the assumption that ShortData is always at
least as large as a pointer is violated.
Found while porting away from overly-generic qSwap(), so done that,
too.
Task-number: QTBUG-97601
Pick-to: 6.3 6.2
Change-Id: I5139da58d99e9491a582ff2cb2f817cd96952044
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Connecting to a non-signal should fail, but apparently it doesn't on
Windows+MSVC under certain conditions.
Task-number: QTBUG-101761
Change-Id: I3e014660e4e5b287242e32307f677bb22ab10a39
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- The newest GHS compiler versions set the value of has_signaling_NaN to False.
Add compilation and autotest fix for GHS-compiler 2021/2022 releases.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I45e5da6759a15c60c17f896e565002cbba8524ed
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That is, insert() doesn't overwrite an existing entry, and range
insert inserts the first of equivalent keys' values, not the last.
This allowed this author to optimize the implementation of
makeUnique() to a O(N) algorithm (was: O(N²)). Said optimization would
have been possible with the old semantics, too, but I wrote the
algorithm first and only then noticed the broken insert() behavior is
present on QFlatMap, too, so I decided not to let good code go to
waste and to fix both problems at the same time.
In order to give users a hint of the changed semantics, make the new
API opt-in until Qt 6.5, so Qt 6.4 ships with the both the old and the
new semantics disabled, where they contradict.
Fixes: QTBUG-100092
Change-Id: Ic96d8bfe6bed9068dbe8c0d7171bd8921050fd95
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Animations in that style depend on the current time, which makes it
impossible to run baseline tests. Introduce a dynamic property that
allows us to set the time that animations use.
This way, tests can turn the animation off, or control which time should
be used.
To keep performance overhead low, check only once whether the dynamic
property is set at all.
Pick-to: 6.3
Change-Id: I9bc57b9867fb0d852e101570eca4c7609e7fe1a8
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Add a cmake test that builds a simple widgets application, installs
it, in a shared Qt build deploys the runtime dependencies and then
runs it to confirm that the app works.
With a static Qt, the installation of the runtime dependencies is
skipped, but the app should still run.
The test is expected to pass only when targeting Windows and macOS
(both when using shared and static Qt).
Pick-to: 6.3
Task-number: QTBUG-98545
Change-Id: I41b616e1e1fc463d57c64be9273ed4dc755e9187
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
In no particular order:
- use the variable field width feature of QString::asprintf() to
generate the indentation implicitly, instead of fill()ing a
QByteArray with the desired number of spaces
- just default-construct 'flags', don't assign an empty string
- use qUtf16Printable() to avoid funneling UTF-16 data through 8-bit
encodings
- use a C++11 ranged for instead of a counted loop
- remove a pointless isEmpty() guard (the loop won't execute when the
children().isEmpty())
- avoid copying object->children() (returns by cref, so it's also ok
to stuff it directly into the ranged for loop).
Add a test.
Pick-to: 6.3
Change-Id: Ie7314713cb48de7e890cdee0760c0361dd24fd18
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test task191545_dragSelectRows relied on the fact
that the view is not scrolling. But on a small screen,
it scrolls automatically.
Fixes: QTBUG-87407
Pick-to: 6.2 6.3
Change-Id: I691361c965ab03d8a012f2b83715c7c96d990ec5
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The previous constraint called for the value_type of the container to
exactly match the value_type of the tokenizer, which means
toContainer() could only ever work on containers of views. But there
is value in allowing QStringList, even though it works only on QL1S
needles (QStringView -> QString isn't implicit). But users may have
other types that for better or worse implicitly convert from views, so
we shouldn't over-constrain the function.
[ChangeLog][QtCore][QStringTokenizer] toContainer() now works on
containers whose value_type can be constructed from the tokenizer's
value_type. It no longer requires an exact match.
Fixes: QTBUG-101702
Change-Id: Ie384cd1c4b51eaa57675f2a014141ceec8651c81
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Android 9 introduce an API call to clear the clipboard, before that
it wasn't possible to do that, the test QPlainTextEdit::canPaste()
should expect that to fail.
Pick-to: 6.3 6.2
Task-number: QTBUG-100470
Change-Id: Ie2d8aabf77672c62b3a6c72a080a4e37f1696303
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
In a recent improvement (6de36918c0) the
last set clip region or path was stored in separate variables, in
order to be set again if the aliasing mode changed. That solution was
too simplistic, as it would break down as soon as more than one clip
area was set, with the latter either replacing or intersecting the
first. It was also unnecessary to introduce new storing of clip areas
and transforms, as those are already recorded in the clipInfo stack in
the painter state. This patch hence reverts much of that implementation.
However the basic idea of setting the clip area again after AA change
is good, so that part is kept, implementated instead by calling a
pre-existing function to replay the clipInfo stack.
One of the baseline test cases is extended to excercise the
combination of clip areas. As a driveby, support for setClipRectF is
added to the painting baseline test scripts, and the build of the
manual lance tool is fixed.
Fixes: QTBUG-101474
Pick-to: 6.3 6.2
Change-Id: Ide8b70d8cbf138deb06cbb84f69e62f7405886e6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Amends a74cdf778c, after which the
initialization of items in invisible rows is skipped. Since data members
in QFormLayoutItem were lazily initialized, this resulted in out-of-bounds
access of QList entries.
Use member initialization for all QFormLayoutItem fields, and check that
vLayoutIndex is valid before using it to access the list entry. Skip
labels and fields for which it is not initialized.
Add test case. As a drive-by, silence the test's provoked warning
messages via ignoreMessage.
Change-Id: I374b414a51df20b9af3087a2676061fc6b7f23e2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
C++20 deprecated arithmetic on enum types. For enums used on QFlags<>,
these operators have always been user-defined, but when the two enums
are of different type, such as QFrame::Shape and QFrame::Shadow, the
deprecation warning pops up.
We have in the past fixed these in our headers by manual casts, but
that doesn't help our users when our API requires them to OR together
enums of different type.
Until we can rework these APIs to use a variadic QFlags type, we need
to fix it in an SC and BC way, which is what this patch sets out to
do.
The idea is simply to mark pairs of enums that are designed to be ORed
together and replace the deprecated built-in bitwise operators with
user-defined ones in C++20. To ensure SC and BC, we pass an explicit
result type and use that to check, in C++17 builds, that it matches
the decltype of the result of the built-in operator.
This patch is the first in a series of similar patches. It introduces
said markup macro and applies it to all enum pairs that create
warnings on (my) Linux GCC 11.3 and Clang 10.0.0 builds. It is
expected that more such markups are needed, for other modules, and for
symmetry.
Even with this patch, there is one mixed-enum warning left, in
qxcbwindow.cpp. This appears to be a genuine bug (cf. QTBUG-101306),
so this patch doesn't mark the enums involved in it as designed to be
used together.
This patch also unearthed that QT_TYPESAFE_FLAGS, possibly
unsurprisingly so, breaks several mixed bitwise flags-enum operations
(QTBUG-101344).
Pick-to: 6.3 6.2 5.15
Task-number: QTBUG-99948
Change-Id: I86ec11c1e4d31dfa81e2c3aad031b2aa113503eb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
[ChangeLog][QtGui][QColor] The constructors from string-ish type, as
well as the setNamedColor() and isValidColor() functions, have been
deprecated effective Qt 6.6 in favor of fromString() and
isValidColorName(), resp.
Fixes: QTBUG-101389
Change-Id: I002646bd48c1e4340dc6842fd136fc9f35bb9b61
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The resulting blurriness is too significant, and it's hard to see where
the difference comes from. Better to encode the screen DPR into the
appearance ID if it's not 1.0, and warn about the comparison not being
done to the baseline images with a 1.0 DPR.
Pick-to: 6.3
Change-Id: Iceab7b0a4cc50627145bd1267cff22344f7d8e5b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Widget tests run in VMs that don't have their own git clone.
Pick-to: 6.3
Change-Id: I20ab32affabfc7ce6dfaa445306b19efb51803e9
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Mangling it into the checksum makes it hard to navigate the available
images.
Pick-to: 6.3
Change-Id: I54dcab5681e747ce1c5fe1b141ef6c4441d1f7eb
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Previously the blacklisting file format only worked with slot:data or
plain slot names for the items to blacklist. However, tests with
global data report themselves with the global data-row tag in the same
way as function-specific ones do; and tests which have both join the
two as slot(global:data) in the test output name, so the reader is apt
to mistake global:data for a data tag. In any case, it is potentially
desirable to be able to blacklist a function with either or both of
global and local data-row tags specified. Add support for that and
remove a blacklisting that was only needed due to the lack of this
support.
For now, make the new parameter to checkBlackLists() optional, so
that qtdeclarative's qmltest framework can adapt to this change.
Fixes: QTBUG-100870
Change-Id: I9125811ebdab75d3fb462ba8b60561f003426502
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This was not previously tested.
Change-Id: Icd287b519f6bc5d450f4490990ac78b0d06774f6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
pthread_yield() is a non-posix extension and was deprecated for a long time.
It's been removed recently at least from Fedora 35. Use sched_yield() instead.
Change-Id: Iae47fa09cc89005aa466446149be87e1b673c074
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
for QInputDevice::primaryKeyboard() and
QPointingDevice::primaryPointingDevice().
This also reverts ae9fefe3c8.
Fixes: QTBUG-100790
Pick-to: 6.3
Change-Id: Id02f277db25f823eb29e939e25801325df8e4076
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Found when retesting the testcase completer.zip from QTBUG-54642
Pick-to: 6.3 6.2 5.15
Change-Id: Id84eefeb3a33dc6d790cfa23755352381cc097a9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
And remove their uses.
[ChangeLog][QtCore][Deprecation Notice] Deprecated QString::count()
and QByteArray::count() that take no parameters, to avoid confusion
with the algorithm overloads of the same name. They can be replaced
by size() or length() methods.
Change-Id: I6541e3235ab58cf750d89568d66d3b1d9bbd4a04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QPlatformTextureList holds a QRhiTexture instead of GLuint. A
QPlatformBackingStore now optionally can own a QRhi and a
QRhiSwapChain for the associated window. Non-GL rendering must use
this QRhi everywhere, whereas GL (QOpenGLWidget) can choose to still
rely on resource sharing between contexts. A widget tells that it
wants QRhi and the desired configuration in a new virtual function in
QWidgetPrivate returning a QPlatformBackingStoreRhiConfig. This is
evaluated (among a top-level's all children) upon create() before
creating the repaint manager and the QWidgetWindow.
In QOpenGLWidget what do request is obvious: it will request an
OpenGL-based QRhi. QQuickWidget (or a potential future QRhiWidget)
will be more interesting: it needs to honor the standard Qt Quick
env.vars. and QQuickWindow APIs (or, in whatever way the user
configured the QRhiWidget), and so will set up the config struct
accordingly.
In addition, the rhiconfig and surface type is (re)evaluated when
(re)parenting a widget to a new tlw. If needed, this will now trigger
a destroy - create on the tlw. This should be be safe to do in
setParent. When multiple child widgets report an enabled rhiconfig,
the first one (the first child encountered) wins. So e.g. attempting
to have a QOpenGLWidget and a Vulkan-based QQuickWidget in the same
top-level window will fail one of the widgets (it likely won't
render).
RasterGLSurface is no longer used by widgets. Rather, the appropriate
surface type is chosen.
The rhi support in the backingstore is usable without widgets as well.
To make rhiFlush() functional, one needs to call setRhiConfig() after
creating the QBackingStore. (like QWidget does to top-level windows)
Most of the QT_NO_OPENGL ifdefs are eliminated all over the place.
Everything with QRhi is unconditional code at compile time, except the
actual initialization.
Having to plumb the widget tlw's shareContext (or, now, the QRhi)
through QWindowPrivate is no longer needed. The old approach does not
scale: to implement composeAndFlush (now rhiFlush) we need more than
just a QRhi object, and this way we no longer pollute everything
starting from the widget level (QWidget's topextra -> QWidgetWindow ->
QWindowPrivate) just to send data around.
The BackingStoreOpenGLSupport interface and the QtGui - QtOpenGL split
is all gone. Instead, there is a QBackingStoreDefaultCompositor in
QtGui which is what the default implementations of composeAndFlush and
toTexture call. (overriding composeAndFlush and co. f.ex. in eglfs
should continue working mostly as-is, apart from adapting to the
texture list changes and getting the native OpenGL texture id out of
the QRhiTexture)
As QQuickWidget is way too complicated to just port as-is, an rhi
manual test (rhiwidget) is introduced as a first step, in ordewr to
exercise a simple, custom render-to-texture widget that does something
using a (not necessarily OpenGL-backed) QRhi and acts as fully
functional QWidget (modeled after QOpenGLWidget). This can also form
the foundation of a potential future QRhiWidget.
It is also possible to force the QRhi-based flushing always,
regardless of the presence of render-to-texture widgets. To exercise
this, set the env.var. QT_WIDGETS_RHI=1. This picks a
platform-specific default, and can be overridden with
QT_WIDGETS_RHI_BACKEND. (in sync with Qt Quick) This can eventually be
extended to query the platform plugin as well to check if the platform
plugin prefers to always do flushes with a 3D API.
QOpenGLWidget should work like before from the user's perspective, while
internally it has to do some things differently to play nice and prevent
regressions with the new rendering architecture. To exercise this
better, the qopenglwidget example gets a new tab-based view (that could
perhaps replace the example's main window later on?). The openglwidget
manual test is made compatible with Qt 6, and gets a counterpart in form
of the dockedopenglwidget manual test, which is a modified version of
the cube example that features dock widgets. This is relevant in
particular because render-to-texture widgets within a QDockWidget has
its own specific quirks, with logic taking this into account, hence
testing is essential.
For existing applications there are two important consequences with
this patch in place:
- Once the rhi-based composition is enabled, it stays active for the
lifetime of the top-level window.
- Dynamically creating and parenting the first render-to-texture
widget to an already created tlw will destroy and recreate the tlw
(and the underlying window). The visible effects of this depend on the
platform. (e.g. the window may disappear and reappear on some,
whereas with other windowing systems it is not noticeable at all -
this is not really different from similar situtions with reparenting
or when moving windows between screens, so should be acceptable in
practice)
- On iOS raster windows are flushed with Metal (and rhi) from now on
(previously this was through OpenGL by making flush() call
composeAndFlush().
Change-Id: Id05bd0f7a26fa845f8b7ad8eedda3b0e78ab7a4e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If a test crashes it might leave local sockets, causing test failures
on subsequent runs due to the socket already being "in use".
Pick-to: 6.3
Change-Id: Ie1107c414f4819026907071c7b8281b2e27b8541
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
RFC2397 doesn't explicitly mention it, but references RFC2045, which,
in Section 2, states:
> All media type values, subtype values, and parameter names as
> defined are case-insensitive.
and goes on, in 6.1:
> mechanism := "7bit" / "8bit" / "binary" /
> "quoted-printable" / "base64" /
> ietf-token / x-token
>
> These values are not case sensitive
So regardless of whether "base64" is a parameter name, or a mechanism,
we need to treat it case-insensitively.
Use QLatin1String::endsWith() instead of QByteArray::endsWith(),
because the former takes Qt::CaseInsensitive while the latter would
need a toLower().
Add a test.
As a drive-by, use the same trick for the existing case-insensitive
comparison with "charset".
As a further drive-by, fix inappropriate uses of QLatin1String (=
where they don't prevent allocations).
[ChangeLog][QtCore][QUrl] Now recognizes the ";base64" marker in
"data:" URLs case-insensitively.
Pick-to: 6.3 6.2
Change-Id: Ife6ba771553aaad3b7c119c1fa631f41ffa8f590
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We want to mark the corresponding QColor ctor(s) explicit.
Use Qt::GlobalColor or the new QColor::fromString() instead.
Change-Id: I68bf75a094e6821b97682de5a0ffd975834d22d0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QObject's cache the binding status pointer to avoid TLS lookups.
However, when an object is moved to a different thread, we need to
update the cached pointer (as the original thread might stop and thus no
longer exist, and to correctly allow setting up bindings in the object's
thread).
Fix this by also storing the binding status in QThreadPrivate and
updating the object's binding status when moved. This does only work
when the thread is already running, though. If it is not running, we
instead treat the QThreadPrivate's status pointer as a pointer to a
vector of pending objects. Once the QThread has been started, we check
if there are pending objects, and update them at this point.
Pick-to: 6.2 6.3
Fixes: QTBUG-101177
Change-Id: I0490bbbdc1a17cb5f85044ad6eb2e1a8c759d4b7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QComboBox is included because it works like a button when it is not
editable. QGroupBox is included because it has a checkbox and QCheckBox
is a subclass of QAbstractButton.
Change-Id: Iad89259314e77f78c915dce83ec601df94c88941
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Qt Creator crashes when max is INT_MAX and min is -1, see bugreport.
Change-Id: I441e76c0ff87052083ed3d77e6085b186402e5d8
Fixes: QTBUG-101581
Pick-to: 6.2 6.3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Required for the API symmetry between QStringView and QLatin1String.
[ChangeLog][QtCore][QStringView] Added an overload of
QStringView::count() for QLatin1String.
Change-Id: Ic49a4b31e8f6f0969eff0f792654d23a60e06c49
Task-numer: QTBUG-98431
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Also contains some fixes which fix the Windows build, amending
e1b8257dee.
Pick-to: 6.3
Fixes: QTBUG-101294
Fixes: QTBUG-101304
Change-Id: I779f50fc705ed32f0314daf28b39b477a7fe925d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check that the expected overloads are selected in
QString/QAnyStringView overload sets.
Pick-to: 6.3
Change-Id: I38148c20a72eb60cf86844a39fe0ed419d2fa562
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It is customary for Qt types that can be constructed from string-ish
to provide a fromString() named constructor. QColor didn't, relying
instead on a set of overloaded implicit and explicit constructors.
Add the named constructor, with the intent to deprecate the string-ish
QColor constructors after a grace period.
To prevent new users from using known-to-become-deprecated API, mark
the old functions as \obsolete.
Also rename isValidColor() to isValidColorName(). The only reason why
these are lumped together in single commit is so that their docs can
refer to each other instead of having to temporarily refer to obsolete
API.
[ChangeLog][QtGui][QColor] Added fromString() and isValidColorName(),
both taking QAnyStringView.
Task-number: QTBUG-101389
Change-Id: I2857c728257ad2f14c7c968b45547bdf07c44b63
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Without this change, the test fails when run twice in a row. Also, skip
the test if we can't move the cursor.
Pick-to: 6.3
Change-Id: Ic45c073007d114fbd7825cedef6761c1e410b4af
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Also include the comprehensive tests for bool cast compilation which I
originally wrote to confirm that the QTEST_ASSERT() change should be™
correct.
Pick-to: 6.3
Task-number: QTBUG-101406
Change-Id: I9a2871bfd4be9999b7a720bec775bba7aeffbe24
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
QDateTimeEdit's default constructor instantiates the start of
1752-09-14 as its default earliest time; however Friedeman has seen
this triggering an assertion. The QDTE tests should be picking that up
anyway, but let's overtly test it in QDate's startOfDay testing, too.
Change-Id: Ifae87f2695ac3a7993c173a7c21809c87d5daa71
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The test crashed for some reason, so other testcases are also not
executed. Skip the test for now to enable more tests in the CI
Task-number: QTBUG-89402
Pick-to: 6.3 6.2
Change-Id: I5ad38645d1b8f86c64da7208c0ae4f66d126c7d9
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Most of the blacklisted tests were already fixed earlier.
The tst_QPlainTextEdit::adjustScrollbars() test needed a small fix
to show the window non-fullscreen, so that the scrollbar could appear.
Task-number: QTBUG-87423
Task-number: QTBUG-89402
Pick-to: 6.3
Change-Id: I849f411a5798053742323fc4db3fe30f2b690a8b
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This overload set may come in handy to cushion some of the concerns
regarding replacing QString functions with QAnyStringView ones.
Overloading with a Q_WEAK_OVERLOAD QAnyStringView function requires
users to jump through hoops in order to avoid the QString overload,
but with the Q_WEAK_OVERLOAD roles reversed, the QAnyStringView
overload becomes the preferred version, relegating the QString
overload to a fall-back to facilitate sharing where it makes sense
(e.g. for QObject::setObjectName()).
Pick-to: 6.3
Change-Id: Ic65ead505beee627976a306e2d430e800540a600
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Use two template parameters for the haystack and needle types, to test
all possible combinations of all argument types.
Note that the tests for QByteArray::count() are removed: it doesn't
make sense to have them in tst_qstringapisymmetry, and we already have
the symmetry tests for QByteArray in tst_qbytearrayapisymmetry.
Change-Id: I33901fd135eb7433f0d45300a7248aef4d40324a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Don't use the haystack as needle when testing count() for QLatin1String.
This wasn't caught earlier, since QLatin1String has no count() yet, and
the codepath was never tested.
Pick-to: 6.3 6.2
Change-Id: I2764070894ddce047eceaea52456e5a521252dab
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The test is no longer failing on Android in dev and 6.3, but still
failing in 6.2.
I think it's fixed by 63a35898f4
which is integrated into dev and 6.3
Task-number: QTBUG-87396
Pick-to: 6.3
Change-Id: I82e0aac1547f8e43353f0948cd3f91b4b8f9720e
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The operators are declared in the Qt::Literals::StringLiterals
namespace, to avoid collisions in the global namespace.
[ChangeLog][QtCore][QLatin1String] Added literal operator""_L1 that
converts string literals and chars to QLatin1String and QLatin1Char.
Fixes: QTBUG-98434
Change-Id: Ia945a6acf4b8d4fbbb5f803264e4d79d7b17a8da
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Our associative containers' iterator's value_type isn't a destructurable
type (yielding key/value). This means that something like
for (auto [k, v] : map)
doesn't even compile -- one can only "directly" iterate on the
values. For quite some time we've had QKeyValueIterator to allow
key/value iteration, but then one had to resort to a "traditional" for
loop:
for (auto i = map.keyValueBegin(), e = keyValueEnd(); i!=e; ++i)
This can be easily packaged in an adaptor class, which is what this
commmit does, thereby offering a C++17-compatible way to obtain
key/value iteration over associative containers.
Something possibly peculiar is the fact that the range so obtained is
a range of pairs of references -- not a range of references to pairs.
But that's easily explained by the fact that we have no pairs to build
references to; hence,
for (auto &[k, v] : map.asKeyValueRange())
doesn't compile (lvalue reference doesn't bind to prvalue pair).
Instead, both of these compile:
for (auto [k, v] : map.asKeyValueRange())
for (auto &&[k, v] : map.asKeyValueRange())
and in *both* cases one gets references to the keys/values in the map.
If the map is non-const, the reference to the value is mutable.
Last but not least, implement pinning for rvalue containers.
[ChangeLog][QtCore][QMap] Added asKeyValueRange().
[ChangeLog][QtCore][QMultiMap] Added asKeyValueRange().
[ChangeLog][QtCore][QHash] Added asKeyValueRange().
[ChangeLog][QtCore][QMultiHash] Added asKeyValueRange().
Task-number: QTBUG-4615
Change-Id: Ic8506bff38b2f753494b21ab76f52e05c06ffc8b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
