QSet and std::(unordered_)set were so far not treated as appendable, as
they lack a push_back method. We do however need support for this in
declarative to enable converting back from QJSValue arrays to sets.
We achieve this by testing for and using the insert method. While vector
has also such a method, it doesn't take a single value, but rather a
position or iterator + value, so the template specialization is not
ambiguous.
Task-number: QTBUG-82743
Change-Id: I74fc7b1b856d9bcd38100b274ba2b69578ea8bbb
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QLinkedList has been deprecated, but we still need to test it. Suppress
the warnings for QLinkedList used in tests. Note, that I had to move
some of the test code, to avoid repeating
QT_WARNING_PUSH/QT_WARNING_POP everywhere.
Change-Id: I4203b3ef50045c4f45475a08638dbdc60f68761d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test was fixed and metrics show no flaky failures anymore.
Task-number: QTBUG-58713
Change-Id: I50c0844db099f45bb5b7ca51a510bf0318554c44
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Instead of comparing to absolute values, compare the result from
QDeadlineTimer with the reference clock types from std::chrono. Pass
the test as long as we are within 10% of that reference.
In addition, handle the case where QTest::qSleep sleeps for more than
10% longer or shorter than what is requested, and if so, abort the
test.
Change-Id: If8b77aea55a8c5c53e96427b2fff2f78281d0f82
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Much of this test case was testing that the machine it runs on didn't
take more than an expected amount of time, which is an assumption that
won't hold in a virtual environment where the hypervisor might decide
to not allocate any CPU time to the machine at certain times.
Instead, take the samples that we want to compare with once, then
use them as reference for further comparisons.
Also, split the test in two, with the comparison operators and msecsTo
test moved into a separate test function.
Change-Id: I7db12b8e02552f4d63af933c1b0fee9d62b591eb
Fixes: QTBUG-58713
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Flaky fails in this test suggest that the VM on which the
test is executed does not get CPU resources allocated for enough time
to make this test pass. This change makes the test more resilient by
taking the measurements as quickly as possible.
In addition, use a sanity-check based on std::chrono APIs to abort the
test completely if we see that the clock has advanced too far to make
the following tests meaningful.
Change-Id: Ie6ac4ffb52f20e7774014f8222c9cd8f54d8a263
Fixes: QTBUG-64517
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Following wg21.link/LWG3228, it was found that a proper variant fix
requires that T* -> bool conversions be treated as narrowing
conversions in subclause wg21.link/dcl.init.lst. wg21.link/P1957R2 was
accepted in Prague 2020 as a DR and retroactively applies to older C++
standards.
Since we hard-code the algorithm of [dcl.init.lst], we can and must
add this manually.
[ChangeLog][QtCore][QObject] For the purposes of
QT_NO_NARROWING_CONVERSIONS_IN_CONNECT, pointer
(incl. pointer-to-member) to bool conversions are now considered
narrowing. This matches the resolution of a defect report in C++
itself.
Change-Id: Ifa9a3724c9c8ccd3dd6614928dbbe37477591dc1
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
We observe this happening on macOS in the CI system, and it might happen
if a VM doesn't get CPU cycles for long enough time so that two timers
time out. Then event processing will process two timer events, and we
overwrite the timerIdFromEvent with the second event.
Instead, skip the test when this happens.
This is an ammendment to 5c520f4b0a
Fixes: QTBUG-71751
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 67491e2df5)
Change-Id: I30eef8cfc94988e6cad500dd5e6722488c2985be
On macOS, the registerTimer test case fails frequently, and blocks
valid integrations. With this change we try to detect the condition
and skip the test.
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 5c520f4b0a)
Change-Id: I97644b5b4654b4c96fbc99858bbf191e6edb5977
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We observe this happening on macOS in the CI system, and it might happen
if a VM doesn't get CPU cycles for long enough time so that two timers
time out. Then event processing will process two timer events, and we
overwrite the timerIdFromEvent with the second event.
Instead, skip the test when this happens.
This is an ammendment to 5c520f4b0a
Change-Id: Ibc1169b5458c8dce9d4fe9ce715f49c396e17b86
Fixes: QTBUG-71751
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This allows for instance to show the current UI language in the UI,
or to load additional translations that match the .qm file by other
means.
This is especially useful in the case of QTranslator::load(QLocale(),
...), in which case different language and country combinations might
be tried.
Another option is to inspect the file name via QTranslator::filePath();
however, this is more error-prone, and might also miss information
(if the .qm file name doesn't have a country suffix, or no suffix at
all).
Change-Id: I6f565d53d8f50e21241ccae6c4de264747ac8f81
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
On macOS, the registerTimer test case fails frequently, and blocks
valid integrations. With this change we try to detect the condition
and skip the test.
Change-Id: Id2065f606abfd431971becf63034a4c1f0fdb9e5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We don't know which versions these blacklistings actually apply on
unless we actually get macOS 10.14 and 10.15 into the CI and running
tests, so let's start with that, and then granularize the blacklists
after that.
Task-number: QTBUG-75786
Change-Id: Id79642afa50cb20efa2cd209286b6933918d3a4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
... in docs, comments, and warnings. Also adopt
some occurrences around there and in the snippets.
Change-Id: Icc0aa0868cadd8ec2270dda794bf83cd7ab84160
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
If a type has both a converter to QVariantList and to
QSequentialIterableImpl registered, we would have chosen the
QSequentialIterableImpl version. In the case of types like QJSValue,
this is more costly. With this change we therefore uses the direct
conversion if it has been registered.
The same applies to QAssociativeIterableImpl and
QVariantHash/QVariantMap.
Change-Id: I9c0b5068efe4bfbc5e0598a200e6db59201e9974
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This flag is used in QSequentialIterable and QAssociativeIterable to indicate
that the data pointer in VariantData should be deleted after the variant has
been constructed.
The use case for this is
https://codereview.qt-project.org/c/qt/qtdeclarative/+/284151, where we have
a proxy iterator and cannot easily return a pointer to already owned data, as
it is hard to manage its lifetime in the iterator. In contrast, it is clear
that we can release the memory in the QSequentialIterable functions, as it has
already been copied into the QVariant there.
Change-Id: I2b33497d991cd4f752153e0ebda767b82e4bb851
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
even if we are currently inside processEvents (apparently called manually
and not from QEventLoop::exec()). A carefully crafted application
(see, for example, the linked QTBUG or even updated auto-test)
can trigger itself into failing to exit the current (potentially nested)
event loop. We can harden our Cocoa event dispatcher to detect
such condition and properly propagate 'interrupt' to where it'll
do its job, indeed, interrupting the real event loop (aka [NSApp run]).
This mainly means we have to undo what bool blocker would erroneously do.
Also, long live (as people love to say these days) to another tricky
(somewhat) auto-test (surely, it's not flaky!).
Fixes: QTBUG-79477
Change-Id: I794f0cda23e24d36be67f2bb63d52b74be057c31
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In prevision to Qt6 which is going to discourrage the use of the integer id,
add some missing API to the staticless QMetaType API:
- Add a way to construct a QMetaType from a type without calling qMetaTypeId:
QMetaType::fromType<T>()
- Add equality operators
- Add a QMetaType::name() function
- Add a default constructor (by adding a default parameter to the existing ctor)
Change-Id: I95487c1c31bdf0d773717daa9d5452cbced30673
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
When running Qt autotests on a developer machine with a high
resolution, failures occur due to either some widget becoming too
small, some rounding fuzz appearing when Qt High DPI scaling is active,
or some test taking screenshots failing to deal with device pixel
ratios != 1 in the obtained pixmaps.
It is not feasible to adapt all tests to pass on high resolution
monitors in both modes (Qt High DPI scaling enabled/disabled). It
should be possible to specify the High DPI setting per test.
Previously, it was not possible to set the Qt High DPI scaling
attributes since they must be applied before QApplication
instantiation.
Enable this by checking for the presence of a static void initMain()
function on the test object and invoking it before QApplication
instantiation.
Prototypically use it in tst_qtimer and to turn off High DPI scaling for
tst_QGL.
[ChangeLog][QtTestLib] It is now possible to perform static
initialization before QApplication instantiation by implementing a
initMain() function in the test class.
Change-Id: Idec0134b189710a14c41a451fa8445bc0c5b1cf3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There are two cases:
In a BlockingQueuedConnection, QMetaCallEvent doesn't allocate memory
and instead passes already existing pointers through. A QSemaphore
is used to serialize data access between threads. So the constructor
taking a QSemaphore can be simplified to only accept an existing arg
array.
In a QueuedConnection, QMetaCallEvent needs to make deep copies of
the arguments, and memory needs to be allocated based on the number
of arguments. The previous code put the burden of memory allocation
on the code generating the event, while the memory was free'd by
~QMetaCallEvent. Instead, make it QMetaCallEvent's responsibility
to allocate and free the memory as needed, and adjust the code
generating QMetaCallEvents.
We can allocate the memory for types and pointers to arguments in a
single block, starting with the space for the array of void*, followed
by the space for the array of integers to avoid byte alignment issues.
By pre-allocating the space that's needed by three arguments, we can
avoid all mallocs for the majority of QMetaCallEvents.
Until this change has propagated through qt5.git, we need to keep the
old API that is still used by QtDeclarative around. Once QtDeclarative
has migrated to the new API, it can be removed.
Change-Id: Id7359ffc14897237ea9672dabae9ef199a821907
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Somehow missed these during my first iteration.
Change-Id: Iaef0ab84d9320a98f49ec071c93cd6f2907d92c3
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Windows has a problem relating to cross-DLL variable relocations: they
are not supported. Since QMetaObject's link to the parent class is done
via a pointer, every QMetaObject in a DLL or in the EXE that derives
from a class from another DLL (such as QObject) will be dynamically
initialized.
This commit changes the meta object pointers in QMetaObject::d from raw
pointers to a wrapper class SuperData, which is almost entirely source-
compatible with the pointer itself. On all systems except for Windows
with Qt 6, it's binary compatible with the current implementation.
But for Windows with Qt 6, this commit will store both the raw pointer
and a pointer to a function that returns the QMetaObject, with one of
them non-null only. For all meta objects constructed by moc, we store
the function pointer, which allows the staticMetaObject to be statically
intialized. For dynamic meta objects (QMetaObjectBuilder, QtDBus, QtQml,
ActiveQt), we'll store the actual raw pointer.
[ChangeLog][QtCore][QMetaObject] Some internal members of the
QMetaObject class have changed types. Those members are not public API
and thus should not cause source incompatibilities.
The macro QT_NO_DATA_RELOCATION existed in Qt 4 but was called
Q_NO_DATA_RELOCATION and only applied to Symbian. It was removed in
commit 24a72c4efa ("qglobal: Remove
symbian specific features").
Task-number: QTBUG-38876
Fixes: QTBUG-69963
Change-Id: Id92f4a61915b49ddaee6fffd14ae1cf615525e92
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QLinkedList is still used in several tests. Add exceptions for
these subdirs.
Change-Id: I50ccd2a0892129d4a47aa4e2400211690da9a82d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There's like three pages of this when compiling the test :)
Change-Id: I923f2c4f5eff7c709977026666cc5b2a2cbfaa72
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- Replaced the usages of deprecated APIs of corelib by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Task-number: QTBUG-76491
Task-number: QTBUG-76539
Task-number: QTBUG-76541
Change-Id: I62ed4a5b530a965ec3f6502c6480808f938921aa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... and schedule it for removal in Qt 6.
This appears to have come to some fame on the internet, so better add
a deprecation warning before we remove it in Qt 6.
Change-Id: I42d91d933f47dfd2d8d54c92358e9e46ced6bf21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Semi-automated, just needed ~20 manual fixes:
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)load\(\)/$1loadRelaxed\(\)/g' -i \{\} +
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)store\(/$1storeRelaxed\(/g' -i \{\} +
It can be easily improved (e.g. for store check that there are no commas
after the opening parens). The most common offender is QLibrary::load,
and some code using std::atomic directly.
Change-Id: I07c38a3c8ed32c924ef4999e85c7e45cf48f0f6c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The check to disable the test was the one for QRegExp. This patch fixes
that.
Change-Id: I8783f582998cdd6ffe5dc5dafb3d53d56cd91213
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That's an undocumented Qt 4/3/2 remnant, start remove usages.
Fix incorrect include header in qclass_lib_map.h as a drive-by.
Change-Id: I939be2621bc03e5c75f7e3f152546d3af6d37b91
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix deprecation warnings - replace qFindChild/Children() with
QObject::findChild/Children() and replace some 0 with nullptr.
Change-Id: If2f01d12fa91d09d98a61f73b0449a6773ac93db
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
