Because CBOR strings are encoded in UTF-8, it's possible that the string
that won't fit a QString in UTF-16 would still fit QByteArray in UTF-8
(e.g., anything US-ASCII and most Latin text).
The previous solution was an improvement because we used to read into a
QByteArray then convert the QByteArray to QString, thus using 3x the
amount of memory (1x in QByteArray, 2x in QString). The previous commit
skipped the middle allocation and made the regular readString() function
do the decoding either directly on source memory or by reading in small
chunks (16 kB).
Future improvement for Qt 6.1: add readStringChunk(char16_t *, qsizetype)
so we can do the validation / skipping at O(1) memory.
Pick-to: 5.15 6.0
Change-Id: I7b9b97ae9b32412abdc6fffd1645458c655cc566
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Similar to the previous commit which applied to QCborStreamReader, don't
allocate too much data before checking that the stream actually has that
much.
Pick-to: 5.15 6.0
Fixes: QTBUG-88256
Change-Id: I7b9b97ae9b32412abdc6fffd16454b7568a063ba
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
By calling the internal readStringChunk() function with a QByteArray
pointer, QCborStreamReader::readByteArray() can now avoid allocating the
resulting buffer until the internals have confirmed that there is
sufficient data in the incoming buffer. As a result, we first detect the
EOF condition before we conclude the payload would have been too big for
QByteArray (validation()) test. Meanwhile, the hugeDeviceValidation()
test ends up with a few conditions where it would have copied 1 GB of
data, so limit that too.
We make a choice of reporting OOM vs DataTooLarge only if QByteArray
fails to allocate in the first place (QByteArray::resize() ->
Q_CHECK_PTR -> qBadAlloc, QtCore is always built with exceptions on).
The QCborValue unit test needed a temporary work around until we apply
the same allocation fix (see next commit).
Pick-to: 5.15 6.0
Fixes: QTBUG-88253
Change-Id: I7b9b97ae9b32412abdc6fffd164523eeae49cdfe
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Make sure ulonglong variant converts to a double JSON value when the
value is greater than 2^63.
Change-Id: I4d4392b05de29c220624056d5d0d4664fb2c08b7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These tests are failing with "java.lang.UnsatisfiedLinkError: dlopen
failed: invalid ELF file" at the start, excluding them now to enable
Android testing until they're fixed later.
Task-number: QTBUG-87671
Task-number: QTBUG-87025
Change-Id: Ida7d7158fccdc31df1f9689f77fde832964d732f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QChar should not be convertible from any integral type except from
char16_t, short and possibly char (since it's a direct superset).
David provided the perfect example:
if (str == 123) { ~~~ }
compiles, with 123 implicitly converted to QChar (str == "123"
was meant instead). But similarly one can construct other
scenarios where QString(123) gets accidentally used (instead of
QString::number(123)), like QString s; s += 123;.
Add a macro to revert to the implicit constructors, for backwards
compatibility.
The breaks are mostly in tests that "abuse" of integers (arithmetic,
etc.). Maybe it's time for user-defined literals for QChar/QString,
but that is left for another commit.
[ChangeLog][Potentially Source-Incompatible Changes][QChar] QChar
constructors from integral types are now by default explicit.
It is recommended to use explicit conversions, QLatin1Char,
QChar::fromUcs4 instead of implicit conversions. The old behavior
can be restored by defining the QT_IMPLICIT_QCHAR_CONSTRUCTION
macro.
Change-Id: I6175f6ab9bcf1956f6f97ab0c9d9d5aaf777296d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We want to re-enable Android tests in QTQAINFRA-3867. However,
many tests are failing already preventing that from happening.
QTBUG-87025 is currently keeping track (links) to all of those
failing tests.
The current proposal is to hide those failing tests, and enable
Android test running in COIN for other tests. After, that try
to fix them one by one, and at the same time we can make sure
no more failing tests go unnoticed.
Task-number: QTBUG-87025
Change-Id: Ic1fe9fdd167cbcfd99efce9a09c69c344a36bbe4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since the QVariant types are deprecated in Qt6, use QMetaType instead
Change-Id: I7bddea15a3f1a534d3c6f6b9e7ddf9585a8423bf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's been obsolete for a long time already. Make sure
the compiler now warns about it and remove all remaining
uses in qtbase.
Change-Id: I0ff80311184dba52d2ba5f4e2fabe0d47fdc59d7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
For iterators that return a value, don't use reference in ranged for,
and cast numeric literal to correct size type for QCOMPARE.
Change-Id: Idfd09dbc2ef3ab1bf025c7859ea6e2e9572bc9a1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The logic was complex and missed the UTF-8 UTF-8 case. It ended up
calling the UTF-8 to Latin1, resulting in an improperly-sorted
container, which in turn meant keys were not found when searched.
Fixes: QTBUG-86873
Pick-to: 5.15
Change-Id: I0d3ff441bec041728945fffd16379dec418637ca
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Clean up the state of the projects,
before changing the internal CMake API function names.
Task-number: QTBUG-86815
Change-Id: I90f1b21b8ae4439a4a293872c3bb728dab44a50d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It is lossy, so should be requested explicitly, using a dedicated
fromPixmap factory function.
Deprecate the constructor and assignment operator, and make the
constructor explicit.
[ChangeLog][QtGui][QBitmap] Implicitly constructing and assigning
to a QBitmap from a QPixmap has been deprecated, and the respective
constructor has been made explicit. Use the fromPixmap factory
function instead.
Change-Id: I68ce85b26c901415137b664a1db687021d48bae0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
test.bjon file doesn't exist, however, it's still included in json.qrc.
That causes the test to fail on Android because it's using that resource
file.
Change-Id: I1e93076069073a1a621459a7d90aec5c0c03f768
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This was overlooked when doing the conversion to use UTF-8 as the
standard 8 bit encoding for text.
Fixes: QTBUG-54942
Change-Id: Ib7b1b75b4d694648ab7143f6930b6bb1dcad19c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It has been deprecated and will live in qt5compat from now on.
Fixes: QTBUG-86480
Change-Id: I3744c7cee058d51d0fce633a174ab1a0f9235d2c
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Better to provide the correct meta type to convert to.
Change-Id: I8e0d46e4ba482186201c157e302c03874bd38e7b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Export some private functions from QUtf8 to resolve
undefined symbols in Qt5Compat after moving QStringRef.
Task-number: QTBUG-84437
Change-Id: I9046dcb14ed520d8868a511d79da6e721e26f72b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Check that we can successfully instantiate the data
stream operator for a container before we actually try.
This is required so we can automate registration of debug
stream operators with QMetaType.
Change-Id: Ib100a5242470d7fc8067058cc4d81af2fa9354b0
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
After reimplementing Qt JSON support on top of CBOR, there were
unintended behavior changes when converting QVariant{, List, Map} to
QJson{Value, Array, List} due to reusing the code for converting
QVariant* types to CBOR types, and from CBOR types to corresponding JSON
types. In particular, conversions from QVariant containing QByteArray to
JSON has been affected: according to RFC 7049, when converting from
CBOR to JSON, raw byte array data must be encoded in base64url when
converting to a JSON string. As a result QVariant* types containing
QByteArray data ended up base64url-encoded when converted to JSON,
instead of converting using QString::fromUtf8() as before.
There were also differences when converting QRegularExpression.
Reverted the behavior changes by adding a flag to internal methods for
converting CBOR to JSON, to distinguish whether the conversion is done
from QVariant* or CBOR types. These methods now will fall back to the old
behavior, if the conversion is done using QJson*::fromVariant*().
Additionally fixed QJsonValue::fromVariant conversion for NaN and
infinities: they should always convert to QJsonValue::Null. This works
correctly when converting from variant to QJsonArray/QJsonObject, but has
been wrong for QJsonValue.
Added more tests to verify the expected behavior.
[ChangeLog][Important Behavior Changes] Restored pre-5.15.0 behavior
when converting from QVariant* to QJson* types. Unforeseen consequences
of changes in 5.15.0 caused QByteArray data to be base64url-encoded; the
handling of QRegularExpression was also unintentionally changed. These
conversions are now reverted to the prior behavior. Additionally fixed
QJsonValue::fromVariant conversions for NaN and infinities: they should
always convert to QJsonValue::Null.
Fixes: QTBUG-84739
Change-Id: Iaee667d00e5363906eedbb67948b7b39c9d0bc78
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Comparing two variants will not try to convert the types
of the variant anymore. Exceptions are when both types are
numeric types or one type is numeric and the other one a
QString. The exceptions are there to keep compatibility with
C++ and to not completely break QSettings (which needs automatic
conversions from QString to numeric types).
[ChangeLog][Important Behavior Changes] Comparing two
variants in Qt 6 will not try attempt any type conversions before
comparing the variants anymore. Instead variants of different type
will not compare equal, with two exceptions: If both types are numeric
types they will get compared according to C++ type promotion rules. If
one type is a QString and the other type a numeric type, a conversion
from the string to the numeric tpye will be attempted.
Fixes: QTBUG-84636
Change-Id: I0cdd0b7259a525a41679fb6761f1e37e1d5b257f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Ibdc95e9af7bd456a94ecfffd16066c47ea9766d0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtCore][QJsonDocument] Fixed a bug that caused
QJsonDocument's equality operator to crash if one of the operands was
default-constructed and the other wasn't.
Pick-to: 5.15
Fixes: QTBUG-85969
Change-Id: I5e00996d7f4b4a10bc98fffd1629f835f570ef6b
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Deprecated in 5.15 in favor of CBOR.
Fixes: QTBUG-81239
Change-Id: I711d4bd7dd1247f58e77ac9fa53304cbe5028918
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The tests are testing deprecated functionality, which we
still want to test.
Change-Id: Iad6ed35800896170c17fe019c7a6ecda22398ac3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
warning: format specifies type 'int' but the argument has type 'qsizetype' (aka 'long long')
Change-Id: I6099b53efecea46d191d5dc019c986f99e49c1f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And generate a few more test projects that were missing.
Change-Id: I5df51106549aa5ae09bc3c42360e14b143719547
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The change creates a slight source incompatibility. The main
things to take care of are
* code using printf statements on list.size(). Using qsizetype in
printf statements will always require a cast to work on both 32
and 64 bit.
* A few places where overloads now get ambiguous. One example is
QRandomGenerator::bounded() that has overloads for int, uint and
double, but not int64.
* Streaming list.size() to a QDataStream will change the format
depending on the architecture.
[ChangeLog][QtCore][QList] QList now uses qsizetype to index into
elements.
Change-Id: Iaff562a4d072b97f458417b670f95971bd47cbc6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When I wrote the QCborValue to QJsonValue conversion, I used
QJsonValue::Undefined because it allowed to keep some level of
compatibility in CBOR, despite the function documentation saying that
CBOR undefineds became JSON nulls. Which they did.
But when we converted QJson{Array,Object} to be backed by CBOR classes,
that Undefined meant the insertion into the array/object actually
deleted the entry.
[ChangeLog][JSON] Fixed a regression from 5.14 that caused values of
default-constructed QVariants in QVariantLists, QVariantMaps and
QVariantHashes to disappear when converting to JSON via
fromVariant{,List,Map,Hash}.
Fixes: QTBUG-84610
Pick-to: 5.15
Change-Id: Ic0987177fe463f352db9bd84993f116e2bdacc75
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
All our tests were find() == end() or !=, which depends on the
evaluation order of the arguments to operator==(). If end() is called
first, then the detach happens before find() and all is well. But if
find() is called first, it may return end() before end() detaches.
[ChangeLog][QCborMap] Fixed a bug that could cause the iterator returned
from a failing key search with find() not to match end(). Now, every
call to find() will detach in shared QCborMaps; to avoid this, use
constFind() and constEnd().
Fixes: QTBUG-84583
Pick-to: 5.15 5.12
Change-Id: I552d244076a447ab92d7fffd161793496a8d03a8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
And name the main class QList. That's also the one we document.
This gives less porting pain for our users, and a lot less churn
in our API, as we use QList in Qt 5 in 95% of our API.
In addition, it gives more consistent naming with QStringList and
QByteArrayList and disambiguates QList vs QVector(2|3|4)D.
Fixes: QTBUG-84468
Change-Id: I3cba9d1d3179969d8bf9320b31be2230d021d1a9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add default parameter for arguments in start, startDetached, and
execute for better source compatibility with Qt 5.15. This has the risk
of then hiding incorrect calls to the previous overload taking a single
"command" strings if code is ported from pre-5.15 or ignores deprecation
warnings. This is acceptable, given that the alternative is that all
calls to these functions would require a default constructed QStringList
as the second parameter.
Change-Id: I1ba4df97ac4894d007da5083c8359015d784ddbb
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add an operator QVariant() to QRegExp to keep things at source compatible
as possible.
Add a hack to QVariant::load/save() to recognize the old typeid
for QRegExp and stream them correctly as long as the streaming operators
for QRegExp are registered.
Also move the datastream test for QRegExp to tst_qregexp, and adjust it to
the qvariant changes.
Change-Id: I120b38a7541b43ec07a21b17f7f35c55f071eb75
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Document QStringConverter, QStringDecoder and QStringEncoder.
In addition, do some touches to the API, renaming one enum value,
add a flags argument to one constructor and make some members private.
Change-Id: I8f99dc3d98fb8860cf6fa46301e34b7eb400511b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QStringConverter instead. Also change the default
encoding of QTextStream to utf8.
Change-Id: I30682e75fe0462d1a937539f773640c83a2d82e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
