[ChangeLog][QtWidgets] QApplication no longer sends a mouse move event
to the entered widget if it sends synthetic enter and leave events.
Task-number: QTBUG-67736
Change-Id: I75daaffd53f1ddc2bc4d7df67382cbc22d3eb6fc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This failed (occasionally) in finding the editor widget, so wait for the window
to be shown properly. Also enter the event loop with QTRY_VERIFY and not for a
fixed time of 1 s.
This however just moved the point of failure. Now the test fails since the
clearing and setting of focus does not dismiss the editor widget sometimes, so
still blacklist it.
Task-number: QTBUG-67282
Task-number: QTBUG-66216
Change-Id: Iec598609fce23a25d7b955082d0973685d612715
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
For the time being, no more stretched QComboBox. They
were already looking bad before and nobody complained,
so it's a non-issue. In the future, we might use square
combo boxes in the same way as we do for push buttons
but for non-editable QComboBox only.
Removes what is now dead code, including some leftovers.
tst_QMacStyle updated to reflect size changes to accom-
modate the focus ring.
Change-Id: I60fac86b9acb52cc96373bca0b3cad598ec4f1e7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The test was failing because the files it expected to create were not actually
visible on the disk.
This was because 189e9c93d7 made QTemporaryFile
use unnamed files if the file name is not actually requested. Fix by forcing the
temporary file to be made with the requested name.
CI has not caught this because the test executable is marked insignificant_test
on Linux.
Change-Id: Ibe0244fdfcc66acf3be4314da51b4c0b3b520b71
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use QTRY_VERIFY instead of hard-coded wait for the tooltip to appear.
Also use QTRY_VERIFY to verify that no top level widgets are left over
to account for tooltips and effect windows.
Change-Id: Ia9835fdc480c6abb034f6fc4ad3d6b32751ee536
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Adds the feature of adaptive decimal step sizes for the QSpinBox and
QDoubleSpinBox. By performing a calculation in
QAbstractSpinBox::stepBy() we continuously set the step size one power
of ten below the current value.
So when the value is 1100, the step is set to 100, so stepping up once
increases it to 1200. For 1200 stepping up takes it to 1300. For
negative values stepping down from -1100 goes to -1200.
It also works for all decimal values. 0.041 is increased to 0.042 by
stepping once, and so on.
The step direction is taken into account to handle edges cases, so that
stepping down from 100 takes the value to 99 instead of 90. Thus, a
step up followed by a step down -- or vice versa -- lands on the
starting value; 99 -> 100 -> 99.
Setting this property effectively disregards singleStep, but preserves
its value so that it takes effect again when adaptive decimal step is
disabled.
Adaptive decimal step allows values to be easily set to reasonable
levels. If the spin box value is 12000, changing to 13000 often makes
more sense than to 12001. The feature is turned off be default, when
single stepping is desired.
The accelerated property allows values to be changed quickly, as well,
but it is imprecise. Holding down the button makes it hard to land on
an even thousand, like 12000 or 13000. Often you end up somewhere
nearby and would need a second adjustment to get to an even hundred or
thousand.
[ChangeLog][QtWidgets] Add option of adaptive decimal step size for
QSpinBox and QDoubleSpinBox.
Change-Id: I9f286479b821e240c8ea05c238932fc128c582bb
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This test has been flaky on openSUSE in CI. The problem was that the window is
sometimes resized or removed while processing events after adding the rectangle
item to the QGraphicsScene. When the same mouse event is reused again, it uses
wrong screen coordinates. QGraphicsScene handling of mouse events then looks for
items under cursor at the wrong coordinates, does not find any items and thus
doesn't accept the mouse event.
Fix by using QTest API for simulating mouse events. Also wait for changed signal
rather than blindly running one iteration of event loop.
Task-number: QTBUG-67212
Task-number: QTBUG-66216
Change-Id: I968f9470c6f8803d01cebeda6f12ad76b4fd5293
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
selectFile() is a no-op if the dialog is visible and
its line edit has focus, which will happen at some
point after show() is called.
In other words this is a race, and the test will pass/fail
depending on the timing of the platform implementation.
Task-number: QTBUG-66536
Change-Id: I03957edb6496d17af7a8ed1d4ca86435375e0d40
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Don’t assume that there is an active modal widget
on QApplication::focusChanged(). That signal can also
be emitted on focus clear during dialog destruction.
Task-number: QTBUG-66536
Change-Id: I20c64339c56a52b39c26a7683b62779deba576d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add qWaitForWindowExposed() calls in addition to the
existing qWaitForWindowActive().
Depending on the platform, window activation events may
be synchronous, which means that a window can (and will)
become active before it becomes exposed.
This causes test failures for tests that count paint
event, and does not wait-for-exposed, when the expose/paint
event is delivered after waitForWindowActive() has returned.
We need to keep the waitForWindowActive() as well: the
test has several qWait() calls with he comment:
“Increase the probability of window activation not
causing another repaint of test items”.
These qWait() calls can possibly be removed in a future
commit.
Task-number: QTBUG-66536
Task-number: QTBUG-61967
Change-Id: Ie61bba058b583fdd1d80e600475aff3efccc32eb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This test function was removed from the blacklist as
a part of the cleanup in 2056bc6b, but is still flaky
on CI.
Change-Id: I348ed167dff6fd618ede28456ada6da86ee341cd
Reviewed-by: Paolo Angelelli <paolo.angelelli@qt.io>
QTreeView is stretching the last section by default which was not
considered in this test. It worked by accident on linux because
there the default section size is 100 and the default window width
is also 100. On windows this was not the case and therefore the
test failed.
Task-number: QTBUG-51149
Change-Id: I9be1c1e942fc19817713773fe29d4afa93d73232
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This reverts commit 7257862fb2.
It has been reported that this patch causes widgets with certain effects
become invisible.
Task-number: QTBUG-60231
Task-number: QTBUG-66803
Task-number: QTBUG-66387
Change-Id: I9c3c4cf2f17ac639d1aee5489b665aa1e165af16
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Rename getter QHeaderView::firstSectionMovable()
to QHeaderView::isFirstSectionMovable(), turn into a property
and fix \since.
Change-Id: Ica2ca43d22f3fd78ff63178ba75014807fc9b823
Reviewed-by: David Faure <david.faure@kdab.com>
If buddy is deleted then QLabel will still try to deliver the
shortcut event to it, in QLabel::event(), and cras.
Besides connecting to destroyed() which alone fixes the crash,
also hardened it and guarded against dereferencing null buddy,
in the unlikely event of someone adding features to QLabel.
The second part is suitable for backporting to the LTS branches.
Task-Id: QTBUG-66841
Change-Id: Ib6a36a9f99cee31afe1f88eb77f5b6cafb8b1086
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Whitelist tests that pass locally and that have been
blacklisted since the BLACKLIST was introduced in
2015 (in commit a8dda3b8).
Change-Id: I777b490313ebaa6c8c8daee168487d350179a5e6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Since Qt 5.4 the QTabBar can be automatically hidden when it has less
then 2 tabs. Therefore the sizeHint should not consider the tabbars
size when the tabbar is hidden.
Task-number: QTBUG-64715
Change-Id: I2f248f88d9070de5354f7344c7628a78442ab499
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The code that updates a section size must also update length,
otherwise saveState can end up saving inconsistent state, and
restoreState() goes to an early-return, not doing anything.
The actual bug was fixed meanwhile because _q_sectionsChanged is called
again, which recalculates length. I still see this only as a safety
measure, every other code path that changes section sizes updates length
right away.
Change-Id: I6cc16261692d93b3640afafef600a5bdff8dca0c
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Has been flaky in CI.
Task-number: QTBUG-66815
Task-number: QTBUG-66216
Change-Id: I2c3eb42507eae618486aa402474b4b3f85ff310e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Factor out a function to calculate the size and update the size when a
style sheet parent is set.
Task-number: QTBUG-64550
Change-Id: I3afe997085eae3cd48b7fe0a4c98582a8f572260
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Return value of qWaitForWindowActive should be checked as it is marked
Q_REQUIRED_RESULT.
One of the calls was failing, so remove it and wait for the next condition
instead.
Amends d0dffdfc01.
Change-Id: I0c0b2bf11504730477158a5e1fb3018f359a6fb9
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Before there was a risk looking up e.g index -1 if there
were no visible sections in layoutAboutToChange.
Change-Id: Ic911e4292e8e8c4892fef1c0f34cf7dccaad2bac
Task-number: QTBUG-65478
Reviewed-by: David Faure <david.faure@kdab.com>
Has been flaky in CI.
Task-number: QTBUG-66708
Task-number: QTBUG-66216
Change-Id: I69878574a98139681100c1424d5bbf46cc4a87b8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Do not clear the settings of QHeaderView during layoutChange when the
model is empty and the section count did not change. This will not work
when a section is moved or a section is replaced with a new one during
layoutChange. But since layoutChanged is also called on sorting, this
patch ensures that the settings are not cleared in this case.
This restores the behavior to the same as before 5.9.4.
Task-number: QTBUG-66444
Task-number: QTBUG-65478
Change-Id: I39989cfd45b42e58f49d18ec014d3a941cadb6c9
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
During (re)storing the sections within layoutChanged handling, the
hidden section size was not properly stored which lead to a section
size of 0 when the section was unhided afterwards.
Task-number: QTBUG-66413
Task-number: QTBUG-65478
Change-Id: I0b714c7e0530a1eae82b3bb0e0dc80ed576522d0
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
TouchEvent::TouchPoint::pos was not updated in
QGraphicsScenePrivate::updateTouchPointsForItem().
To prevent the transformation being calculated repeatedly for each touch
point member, extract a function genericMapFromSceneTransform()
from genericMapFromScene() returning the transformation and use
that whereever multiple points are transformed.
Add a test, extracting helper functionality from
tst_QGraphicsItem::touchEventPropagation().
In addition, fold tst_QGraphicsScene::checkTouchPointsEllipseDiameters() from
c48f4bde00 into this test, so that
it is testing all transformations.
Task-number: QTBUG-66192
Change-Id: If71886d2c14c4e216f7781ea2f22f1adc444e6cf
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Since the PlatformInputContext is shared between test cases, the set commit
string from inputMethod() was otherwise saved and could pollute other tests.
For example on Windows PlatformInputContext::commit() was called when the
QLineEdit was first clicked onto in tst_QLineEdit::testQuickSelectionWithMouse()
and inserted "text" in the middle of the text, rather than starting selection as
intended.
This led to tst_QLineEdit::testQuickSelectionWithMouse() failing on Windows at
first in CI, but then always passing the repeats when it was tested alone.
Task-number: QTBUG-66499
Task-number: QTBUG-66216
Change-Id: Id6bdd263d57fd6d08fb48f013542b55b132907ea
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
When the focus is lost on an editor due to the application no longer
being the active one then we have to ensure the parent view is going to
get the focus when it is returned. Since the editor does not have focus
when this check is done we need to manually account for this case by
setting it on the parent view as if it would if the editor did have
focus.
Task-number: QTBUG-62253
Change-Id: I14ac347e9e3a2bfaa8715a45811b17c1c7cf15f8
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Has been failing on it, but not on any other platform.
Task-number: QTBUG-66396
Task-number: QTBUG-66216
Change-Id: I0b208c675a23fb4bc1808dd3aa4dfef9bddf136b
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Previous version of Ubuntu used to be blacklisted and the test is still flaky on
Ubuntu 16.04.
Task-number: QTBUG-66390
Task-number: QTBUG-66216
Change-Id: Iec404879f61164b995f0df7348f4f4baf608ca90
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add a main window, based on the observation that the original bug
report was about a typical main window.
The mainwindow typically has the mouse grabbed when clicking to open
a menu and all mouse events go to it. Mimick that in the test
by sending the mouse events to it.
Remove the code using QCursor::setPos().
Task-number: QTBUG-63031
Change-Id: I9117c9633f81aba8bdff235ce64884c489fdc9f7
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
It is flaky on Ubuntu 16.04 and openSUSE 42.3.
Task-number: QTBUG-66345
Task-number: QTBUG-66216
Change-Id: I06fb88ee65113136309a0faa0336dd11672bfe59
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
[ChangeLog][QtWidgets][QLineEdit] The textEdited() signal is now emitted even if the
QValidator has changed the user input.
Task-number: QTBUG-44046
Change-Id: Ife287269c7dcbb644cb03a291bf96f7db384ed56
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Remove BLACKLIST files which are no longer valid because the mentioned
CI systems are no longer active:
- opensuse-13.1
- opensuse-42.1
- rhel-7.1
- rhel-7.2
- rhel-7.3
- ubuntu-14.04
or the testcases are no longer available:
- QTBUG_14292_filesystem in qactiongroup
Change-Id: I80a4397059fafba169096440fdc07d45c76a1ed8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The possible key sequences for QKeySequence::Copy on X11 is Ctrl+C, then
Ctrl+Insert and at last F16. The order is defined in
QPlatformThemePrivate::keyBindings.
Task-number: QTBUG-46053
Change-Id: I86a0767e268088edfce98cfb07f9fb78f00d0713
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This was the missing counter-part to indexOf(QWidget *), which is
sometimes implemented in user code.
Not sure why the original code doesn't use a for-loop and instead accesses
an out-of-bounds element, but I'll preserve the behavior of very old working code.
Change-Id: I7d7fa56b56a4626789774c15c23fdfef41d723e7
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Likely fail is 3d29a0dd74. Is preventing
merge from dev, so blacklisted for now.
Task-number: QTBUG-66324
Change-Id: Ieb522897e93d4a1b4c0e423fadd4138dfb089093
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QAbstractItemModel::dataChanged() gained an optional role parameter
with Qt5 which was not filled within QTreeWidgetItem setData() function
Change-Id: Ife87e9e046621b464ad340bd9eb451355730e93c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When calling setSceneRect() on a QTouchPoint it will cause the
ellipseDiameters to be changed, whereas this should not be affected by
the scene rectangle as it should be in logical pixels.
Also add a manual test for visually checking the ellipse diameters on
various devices.
Change-Id: I1ee9207cb1a63cfef33fe904594c73aba221af5c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Use the clean implementation that does not use QCursor::setPos()
with the exception of macOS, where this causes
submenuTearOffDontClose() to fail.
Change-Id: I95a615c37bcf419ce1ede65b5ed79a5ec0568391
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This is a standard feature in GtkEntry widgets or HTML
<input type="text"> elements. During a normal text selection by mouse
(LeftButton press + mouse move event), it's now possible to quickly
select all the text from the start of the selection to the end
of the line edit by moving the mouse cursor down.
By moving it up instead, all the text up to the start of the line edit
gets selected. If the layout direction is right-to-left, the semantic of
the mouse movement is inverted.
This feature is only enabled if the y() of the mouse move event is
bigger than a fixed threshold, to avoid unexpected selections in the
normal case. This threshold is set by the QPlatformTheme and a value
smaller than zero disables this feature.
The threshold is updated whenever the style or the screen changes.
[ChangeLog][QtWidgets][QLineEdit] Implemented quick text selection by
mouse in QLineEdit.
Change-Id: I4de33c2d11c033ec295de2b2ea81adf786324f4b
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
- Allocate widgets on stack. The previous version was inconsistent (some
widets were managed by QScopedPointer and some were simply leaking).
- Use QTest::mouseMove(QWindow *)
- "This test fails on OS X on CI" was a clear indication that test is
flaky, the new implementation can reliably reproduce issue which is
now tracked in QTBUG-63031.
Task-number: QTBUG-63031
Change-Id: I59965ef8fa8edca17c8a73901d81e9efc7da3c5b
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
QHeaderView is doing a complete rebuild of the sections when the layout
changed because everything could have happened. But since layoutChanged
is also called during e.g. sorting, the old data must be restored when
possible.
Task-number: QTBUG-65478
Change-Id: I088d4d843cad362b97df6dc5e0dcb9819b13547f
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QAbstractItemModel::dataChanged() gained an optional role parameter
with Qt5 which was not filled within QListWidgetItem/QStandardItem
setData() functions
Task-number: QTBUG-55903
Task-number: QTBUG-63766
Change-Id: I4da9346ef8401cc8633dc4b2ea7d00451d1e3942
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Wait a little bit longer for the visibility and resize events. By
directly waiting for the incoming events with QTRY_COMPARE we give
the test some more time to deliver the expected events.
Also move the check for the expectedResizeCount/expectedPaintCount
before the geometry check for better debugging.
Task-number: QTBUG-64639
Change-Id: I712e432aa8f8d35dd199adf88af3653009528b57
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
File system operations like renaming/removing may fail on Windows when
file system watchers are present. Add functions to
QFileSystemModelPrivate to temporarily remove the watchers prior to such
operations and to restore them in case of failure. Use them for
rename/remove (within a feature check for QFileSystemWatcher
and Q_OS_WIN).
Task-number: QTBUG-65683
Change-Id: I90142901892fbf9b1e1206a3397a95ffd3c8f010
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
While menubar actions are hidden, as menubar was too narrow
to contain them, by clicking the blank area, where the action
was supposed to place, can still trigger the action.
Task-number: QTBUG-65488
Change-Id: I6b137e0717f634ebd3371dbcc2c1ce2089688374
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
By ensuring that the current index follows the focus of an index widget,
we can ensure that moving the cursor will happen in the way that is
expected from the focused widget.
Task-number: QTBUG-27793
Change-Id: Ia36891a94ce41c7d12fba678de23a6f3b69374ae
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
The action which added by QMenuBar::addAction(const QString &text) already
connected relevant signals and slots implicitly, however, while
QMenuBarPrivate::updateGeometry -ing, it reconnects them
if there's a extension button associated with a hidden popup menu.
In that case the QMenuBar::triggered would be fired twice.
Since the QAction's ownership may be changed or added dynamically,
there are still very rare cases like several widgets share the same
QAction object to result in this problem.
[ChangeLog][QtWidgets][QMenu] Fixed a bug in QMenu that caused QMenuBar::triggered
to be fired multiple times.
Task-number: QTBUG-25669
Change-Id: I4d52e82a2136a992e0b37118e41237d96a2c5d22
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The Embedded Android build (Boot to Qt Android injection) is defined by
having both Q_OS_ANDROID and Q_OS_ANDROID_EMBEDDED flags defined,
as well as having Qt config android-embedded.
This commit enables the possibility to build embedded Android builds.
(i.e. Qt build for Android baselayer only, without JNI)
Change-Id: I8406e959fdf1c8d9efebbbe53f1a391fa25f336a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
QItemDelegate::doLayout added a margin after the checkbox which is not
done within QCommonStylePrivate::viewItemLayout. This created a small
but visual difference between using QItemDelegate or QStyledItemDelegate.
The additional margin was removed from viewItemLayout somehwere between
4.4 and 4.5 so it was intentional.
Change-Id: I2fc3f287fe8b181355edeebec9626c49d85fe74d
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Introduce a special hash modeled on the one used for QFileSystemWatcher
on Windows.
Task-number: QTBUG-31103
Task-number: QTBUG-64147
Change-Id: I69ebabe841716e4957ae3fb04fa5c43d233a3552
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
[ChangeLog][QtWidgets][QMenuBar] Add overloads of addAction() using Qt 5 signals and slots
Change-Id: Ief21974213b80111f0ca87df490eb72dd6b9c9b9
Reviewed-by: Martin Smith <martin.smith@qt.io>
QHeaderView::resizeSection() did not check if the given section size is
inside the min/max property bounds.
Also on calling setMin/MaximumSectionSize() the current section sizes
were not checked if they are inside the new given bounds.
This is a small behavior change when a user is setting the section size
via resizeSection() without respecting the min/maxSectionSizes.
Task-number: QTBUG-64173
Change-Id: Ia9c9eebf058d60c776ab5f8f8336642013ec553f
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Since there may be some applications that want to make their comboboxes
scrollable or not with the mouse wheel then a style hint is added to
make this toggable. It defaults to true for all platforms except macOS
to keep it in line with existing behavior.
[ChangeLog][QtWidgets][QStyle] Added SH_ComboBox_AllowWheelScrolling as
a style hint to enable/disable the use of the mouse wheel in a QComboBox.
This defaults to true in all styles except the macOS one so there is no
change in existing behavior.
Task-number: QTBUG-53094
Change-Id: I6eb61e1990bfc79e3b3ea82d7b91ee39096fa077
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
QTreeWidget::visualItemRect() returned an invalid QRect when a column
was moved and then hidden (or the other way round). The reason was that
the logical index returned by QHeaderView::logicalIndexAt() was again
passed to QHeaderView::logicalIndex() to create the QModelIndexes needed
for QTreeView::visualRect()
Task-number: QTBUG-28733
Change-Id: I8676f21bcab8c05c2260b85d483902f18cbf3e24
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QTreeView makes columns movable except for the first one
(since Qt 5.0, see commit e0fc088c0c). This is indeed best
for actual trees, but not when using QTreeView as a flat
multi-column list (with no "root decoration"). Then it should
be possible to move the first column.
[ChangeLog][QtWidgets][QHeaderView] Flat treeviews can now allow
the user to move the first column (like in Qt 4.x) using the new
method QHeaderView::setFirstSectionMovable().
Change-Id: I6b5025e40850bf5c4c373124ee81f657f3f09d29
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QHeaderViewPrivate reimplemented _q_layoutChanged() to handle changes
of rows/columns via layoutChanged/layoutAboutToBeChanged. This worked
fine for Qt4 but since Qt5 only the special signals rowsAboutToBeMoved/
rowsMoved are used for this (8021e2d5e7).
With this change, QAbstractItemViewPrivate::_q_rows/columnsMoved() is
calling the virtual function _q_layoutChanged(). This resulted in a
wrong call of QHP::_q_layoutChanged() for a horizontal header when
a row changed and for a vertical header during a column change. In the
end this can lead to an unhide of hidden sections.
Task-number: QTBUG-54610
Change-Id: Ide4bfc5b24a97746fd1e5af82d3ba08257149157
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QHeaderViewPrivate::_q_layoutChanged() was not called when used in a
QTreeView because it was explicitly disconnected in setModel().
The disconnect was added sometime prio to Qt 4.3, but there the signal
was connected to the doItemsLayout() slot. This was correct since
QTreeView::doItemsLayout() is calling header->doItemsLayout().
In Qt 4.3.0 _q_layoutChanged() was introduced and the disconnect was
adjusted. But since _q_layoutChanged() is doing much more than
doItemsLayout() (e.g. restoring hidden sections), functionality was
lost. The problem was already observed for Qt 4.6 (QTBUG-18196) but
only partially fixed.
Task-number: QTBUG-41124
Task-number: QTBUG-54610
Change-Id: Id13a9930d0163812e12a0287016bab9c3aa02068
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Autotest is taken from the previously reverted
8b1377fde1.
Task-number: QTBUG-60231
Change-Id: I44dd79cba22b6baefdd6d95c176790bef0b7eafe
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
QFontMetrics(F)::width() has been deprecated and is replaced by
horizontalAdvance(). This updates all usage of it in tests and
documentation.
It is worth noting that many or most of the usages of
QFontMetrics::width() probably intended to use boundingRect().width(),
but since it currently works, I have not looked into that, just
replaced the function name mechanically.
Change-Id: Iec382e5bad0b50f37a6cfff841bfb46ed4d4555f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use being()/end() instead.
These were the last remaining uses of QRegion::rects() within qtbase.
Change-Id: I264beb6f660968f40eecbbee2260341fca94ddb5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Drop the useless copy 'r' of 'region', reuse 'r' for the rects in 'region',
to clean up the region handling in verifyColor().
Change-Id: I8e159976b4b0152823be864488d2ef25d7cb0078
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The test is flaky on Linux.
Task-number: QTBUG-64639
Change-Id: Iec56ebce4f656f52187b34c8f655b137e41c3d17
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
QAbstractItemDelegatePrivate::textForRole() was formatting date and
time separately, then gluing the parts back together with space.
QLocale can do that just fine itself (it has a toString() overload
that handles a QDateTime) and might even (some day) do it better. To
my mild surprise, this proved sufficient to fix a problem with
date-time display in tool-tips, when the date-time includes a zone.
Extracted the date-time part of an existing selftest into a test of
its own and extended it to test times of each spec-type; verified that
the non-local spec cases of this all failed before this fix.
Task-number: QTBUG-61069
Change-Id: I6d6be0c27be9a557d8afc3ced200a10b2aaff816
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Test-case taken from bug-report; fits in as an easy row in an existing
data-driven test. Add similar tests for date-time and time; and an
isValid test on the end of year 9999. The date-time parser was using
the end of year 7999 as maximum value for dates and date-times; extend
this to year 9999, as I can see no reason not to.
[ChangeLog][QtCore][QDateTime] Years up to 9999 can now be parsed
without error (previously 8000 and beyond were treated as invalid) in
all formats (not only in ISO format). Widgets handling dates now
support dates to 9999, likewise.
Task-number: QTBUG-64401
Change-Id: I518cfa6c2cb4ecc5a85b896dc9e56b4fdd8a8bb1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTreeWidgetItem::insertChildren should behave like a more-optimized
QTreeWidgetItem::insertChild. Unlike the latter, the former lacks
out-of-bounds checks, resulting in successful insertions even
when using an invalid index (say, bigger than the row/column count).
Reintroduce some sanity checks instead. This allows to fix a "fixme"
left in the autotest.
[ChangeLog][QtWidgets][QTreeWidgetItem] QTreeWidgetItem::insertChildren
now ignores insertions happening at invalid indices, for
consistency with QTreeWidgetItem::insertChild.
Change-Id: I1532597768cc6aff96a6e8f356bc6075b582801d
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
The tests start to show flakyness on Linux in 5.10 (rowCount() check
failing). This seems to point to a race condition between the files
showing up and the file system watchers of QFileSystemModel starting.
To fix this, close the file and wait until it shows up in the directory
before pointing the QFileSystemModel to it. The tests then no longer
rely on the file system watchers.
Change-Id: I39cffb4cacf6843e8e4180efb405345307c78dd8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
A layoutChange indicates that anything can have moved to anywhere else,
including as a result purely of new items being added. It can also
indicate that items are removed.
The old code here incorrectly assumed that the section count remained
constant over this operation by setting the size of the oldSectionHidden
QBitArray - whose size is the size before the layoutChange operation -
and then calling setBit with model rows numbered after the layoutChange
operation. As the two are not necessarily the same dimensions, this can
result in asserts from the setBit call.
Simplify the handling of layoutChanged entirely by clearing section
information, and using the QPersistentIndexes which indicate hidden
state to restore that state after re-population.
Task-number: QTBUG-53221
Change-Id: I3cda13e86b51b3029b37b647a48748fb604db252
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Since the first item in a treeview might be hidden, start from the
first visible item in the view when starting or wrapping round
during a keyboard search.
Task-number: QTBUG-63869
Change-Id: I202bea567c6d4484c3ffaf8a5f9af8ea2e13708d
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
When calling QTreeView::hideColumn() the row heights are not
recalculated. This can lead to rows which are unnecessarily high due to
hidden columns may contain large (e.g. multiline) content. The same
applies to showColumn() - there the row might be to small.
Hiding columns directly via QTreeView::header()->hideSection() is not
covered by this patch since QHeaderView has no way to inform about
newly shown/hidden sections.
Task-number: QTBUG-8376
Change-Id: I20b1198e56e403ab8cf649af76e5e2280821dd68
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Also blacklist tst_QNetworkReply::ioHttpRedirectErrors(too-many-redirects)
on RHEL 6.6 in CI.
Conflicts:
tests/auto/network/access/qnetworkreply/BLACKLIST
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Task-number: QTBUG-64569
Change-Id: I7514fc0660c18fd3a3e1d0d0af3f15d879e3c6f4
As it stood, we would set 'pressed' to false regardless of which button that
was released. This would end up wrong if pressing the left button, and
at the same time, did a click with the right button. This would clear the
flag prematurely, and cause a release signal not to be emitted when later
releasing the left button.
tst_QAbstractButton: adding autotest
Adding tests to simulate the bug report's cases:
1) left press button
2) click right/middle key
3) move mouse out of button's boundary
4) test if the released() signal triggered properly
Taks-number: QTBUG-53244
Change-Id: Ifc0d5f52a917ac9cd2df5e86c0475abcda47e425
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
on Ubuntu_16_04 and openSUSE_42_3.
Task-number: QTBUG-64446
Change-Id: If8fff2823f041428852822470a2f00157795558b
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Resizing a QTreeeView section with double click or
resizeColumnToContents() does not respect the maximumSectionSize when
the resize mode is Interactive or Fixed. Since the documentation of
maximumSectionSize states that it should honor this property for those
cases either the documentation or implementation is incorrect.
This patch fixes the latter.
Task-number: QTBUG-64036
Change-Id: Ic14c8e444d50b9c50a117efed19d0bca7ec1cf82
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The test showed flakyness on Linux. It has been observed that its
windows overlap. Position the windows beside each other.
Change-Id: I4ff1b9cafaf753a6844b3dfabb576a07f74b396a
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
ultrix and reliant have not seen a release since 1995. dgux not since
2001. bsdi not since 2003. irix not since 2006. osf not since 2010.
dynix... unclear, but no later than 2002. symbian needs no mention.
All considered obsolete, all gone.
sco and unixware are effectively obsolete. Remove them until someone
expresses a real need.
Change-Id: Ia3d9d370016adce9213ae5ad0ef965ef8de2a3ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... by moving them in QTestPrivate namespace (qtesthelpers_p.h). This
header file is a convenient staging area for helper APIs, eventually
some could be moved to public QTest API.
This header file utilizes the same pattern as other qtestlib header
files - wrapping functions with QT_${LIBNAME}_LIB to automatically
enable certain APIs based on what is in the projects dependencies,
e.g. QT += widgets.
Change-Id: Ic0266429939c1f3788912ad8b84fc6e0d5edd68b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test is flaky on Unity due to regression introduced by QTBUG-39362.
Skip the test functions until QTBUG-39362 is resolved.
These test functions do not fail on Gnome and KDE, so the functionality
tested by check_cursorKeys* will be covered by other linux distributions
in CI.
Change-Id: Ifd1a7779a9728142424f4956dd6466c822ccde91
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
If a window is blocked by a WindowModal dialog, it should not be
possible to trigger window shortcuts on that window if it receives
a WindowActivate event.
This currently happens if the blocked window gets clicked, because the
window becomes the active_window and then QApplication sends it a
WindowActivate event (this doesn't happen with application modal dialogs).
The correctWidgetContext() function calls QApplicationPrivate::tryModalHelper()
only if the shortcut context is ApplicationShortcut. This patch makes it
call even if the shortcut context is WindowShortcut.
Change-Id: Iff87d85bcae603a6a24128e0cedfa9d33b6485fd
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Make the function brace policy consistent.
Change-Id: Iaf1f05a63958f19927e9b1953da06f99a4eba644
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add some helpers to convert the coordinates and change the code to use the
QWindow-based mouse test API. Remove mouse presses on the second and third menu
from task256322_highlight() since moving the mouse is sufficient to switch
menus.
Remove blacklisting/skipping of macOS and offscreen.
Task-number: QTBUG-63988
Change-Id: If3e94170d11df369aec199d13d54d39382a78723
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
tst_noqteventloop.cpp 'event' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'canFetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'fetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'hasChildren' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'rowCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'columnCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'index' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'parent' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'data' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'begin' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'end' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'updateState' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'drawPixmap' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'type' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
Change-Id: I2a0c5da15994619383c1f90fee311927e58d7af0
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
... the same way other tests do in this file.
Change-Id: Ifcaee084bd20c55d6b9f7ddcf35daebce2a02e07
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Currently on Windows, the Next button's shortcut doesn't work, because
QWizard overrides it with an empty key sequence.
The key sequence should be changed only if isVistaThemeEnabled() returns
true.
Task-number: QTBUG-46894
Change-Id: I54f26388b167973cc8065a867d9e771c1e6a2a72
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QAction::setData() always emits changed() even without actual data change.
Original code lacks a guard to check if the data changes.
According to http://doc.qt.io/qt-4.8/signalsandslots.html,
adding guard also benefits to prevent infinite looping in case
of cyclic connections.
Task-number: QTBUG-62006
Change-Id: I776369b668082f9f02e4502a36b1ae234ee7e079
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Tests should not use QCursor to emulate mouse move, see QCursor::setPos() docs.
The flakiness of the test on XCB is not surprising when the test queries geometry
even before the window has been shown. With the re-factored version I could not
reproduce flakiness anymore.
Removed Q_OS_MAC and closed QTBUG-26274 as test passes on macOS from which I
assume that the underlying issue has been fixed.
Removed Q_OS_QNX ifdef as test does not rely on QCursor anymore.
This patch also fixes the issues on minimal / offscreen platform plugins.
QCursor::setPos() is evil for auto test purposes.
Note:
We intentionally use QTest::mouseMove(QWindow *window, ..), not the QWidget overload.
The QWindow version gets routed through QWSI, which ensures that all necessary events
are generated as expect. In QWidget code path this is currently disabled by
QTEST_QPA_MOUSE_HANDLING.
Change-Id: I285c26cff09e3f2750f8c2abbb1f46c8f7be984a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 1af927976a)
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
On macOS, absence of a QPA menu means that we should be using our
own internal logic since there's no entity on the QCocoaMenuDelegate
to take care of the shortcuts.
Change-Id: I35ed8f0b55445f61d0528709d4debb636a502002
Task-number: QTBUG-61039
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Unique begins with a "y" sound, hence a unique is correct.
Change-Id: I9eb6b4d4c9ddab45af931e97c041c24edf163eca
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The autotest has been blacklisted for RHEL 7.1 and RHEL 7.2 earlier already
and it is still failing in 7.4.
Task-number: QTBUG-46116
Change-Id: I0f33be849513a2debaf8c093dcd413fa09b5c681
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
