Commit 1259c5768e410361bcd8b5cf0c2057a2ebabda83 in qtdeclarative removed the
ability to create QWidgets in QML by giving them the correct parent, which
requires calling QWidget::setParent instead of QObject::setParent. This patch
introduces a hook that will allow QtQml to give widgets a proper parent.
Change-Id: I84c57ca5032582c43e405219343d55ac9cf2ffa0
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
When multiple sections were grouped together, sectionItem.size was the total size of grouped sections, not the size of one section.
Task-number: QTBUG-40462
Change-Id: I401a1583dd30880ccf5b4c105a237d6563f212e8
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
The layout for an invalid block is very likely to be null, it
shouldn't be accessed without checking the block's validity first.
We can make the check a bit more conservative and simply check that
the block isn't empty.
Change-Id: Ic1459a6168b1b8ce36e9c6d019dc28653676efbe
Task-number: QTBUG-43562
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Makes it easier to add new tests.
Change-Id: I5c2bca60e125259eac83a03860e60ca85b51db24
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This is in preparation of adding more tests.
It makes the test run longer, because of the additional book-keeping,
but if something goes wrong, it can pinpoint the circumstances better.
Change-Id: I4be68fcfbffe48e8609b722ea551b1f7c36790a9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
1) everyone forgets to do so (proof: tst_qnetworkaccessmanager_and_qprogressdialog.cpp
forgot too, which led to a valgrind warning, the elapsed timer was never started)
2) setValue(0) makes no sense if the progress dialog goes from 50 to 60,
or any other non-zero minimum value.
Fixed by starting the timer in the constructor (most code doesn't reuse
progress dialogs, so this fixes the most common case), and by also starting
the timer when calling setValue(minimum()) for well-behaved dialogs.
setValue(0) special case kept for compatibility.
Task-number: QTBUG-17427
Task-number: QTBUG-25316
[ChangeLog][Important Behavior Changes][QProgressDialog] The timer for estimating
the duration of the progress dialog is now started in the constructor and in
setValue(minimum()), as well as when calling setValue(0), as previously documented.
Done-with: Marc Mutz <marc.mutz@kdab.com>
Change-Id: Ia8f7fc677438749191b99074fc334eab652ea36f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This test requires test data to be available and the
testRetainSizeWhenHidden test assumes that a widget will be
sized based on its sizeHint(), which does not work on
platforms where show() implies showMaximized().
Change-Id: I9bf372d8c0ea94845ae08481ec555fe25dcfebc0
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This test needs to have a test environment available on the regular
file system, so we create this when initializing the test. In
addition we QEXPECT_FAIL one of the tests which seems to expose
a legitimate bug. A bug report has been created for this.
Change-Id: I7c90aea78a067815cb647a51db5d91a652a9fc1c
Reviewed-by: BogDan Vatra <bogdan@kde.org>
On Android, the HOME and TMPDIR environment variables both point
to the application sandbox, whereas the QSideBar test assumed
they were different. We work around this simply by creating
a new directory and using this as the test dir in place of the
home directory.
Change-Id: I67e01926b901ddf237b05aff116d30b6c7885535
Reviewed-by: BogDan Vatra <bogdan@kde.org>
... in QCOMPAREs.
The implementation is hidden in a nested Internal namespace that retrieves
the strings without strdup()ing. That makes it easier to compose these
functions as there is no need to delete character arrays when using them.
The public interface (which qstrdup()s) is implemented on top of these.
[ChangeLog][QtTest] QCOMPARE now pretty-prints QSizePolicy{,::Policy,::ControlType{,s}}.
Change-Id: Ib03d969847e5a12474c71a7921366b400025f680
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When changing models it makes no sense to keep the old root model index,
pointing into a possibly deleted model. Reset it to the root
of the new model is the best line of action.
[ChangeLog][QtWidgets][QComboBox] QComboBox will now reset its root
model index when a new model is set on it.
Task-number: QTBUG-43350
Change-Id: I113d558ce19fcaed31f13abfbedc7a24302e28d7
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
If the user has some objects selected and holds down the "extend selection"
key (Control on Windows, Command on Mac OS X), clicking and dragging a
rubber band selection deselects the current selection. This is
counter-intuitive and confusing for users.
This commit fixes the behavior so users can extend selections using the
rubber band when the proper key is held down.
Task-number: QTBUG-6523
Change-Id: Ieda4aaa50adb351c0405f5cb8aae23332eec58a9
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
This adds the testdata to a qrc to make them available on Android.
There are still some failures which might be actual errors, and which
will be addressed separately.
Change-Id: I1bdcfb2c6676134ca52388d49a1b2d25cf2813f9
Reviewed-by: BogDan Vatra <bogdan@kde.org>
... which is the module-wide include, bringing in the entire QtCore.
Change-Id: I5cd872efa4562917fc4e3850809cb7595710c43a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
We already let enter/return key presses to reach text edits instead
of closing the editor. Do the same for tab/backtabs.
[ChangeLog][QtWidgets][Important behavior changes] QItemDelegate will
now not close a QTextEdit/QPlainTextEdit editor when the tab key
is pressed; instead, the key will reach the editor.
Task-number: QTBUG-3305
Change-Id: Ife9e6fdc5678535c596d1068770b0963134d8d5a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Fix indention, add empty line as separator, undef a local macro.
Change-Id: Ie0d8529322f87ca2bdedb9a7f2f4cf9f463a6e12
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Split off default-value check from getSetCheck().
This is in preparation of extracting getSetCheck_data().
Change-Id: I869c34014a92e29a07dc08584a93a4cbba372518
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Basically, introduce a small check for this corner-case situation.
Setting a model doesn't just store a pointer, but also resets the current
index, changes the line edit completion model, and so on, and seems silly
to trigger changes in such cases.
[ChangeLog][QtWidgets][QComboBox] A QComboBox does not reset itself any
more when setting the same model more than once.
Change-Id: If028b36cdfaa5552c156dd900e123ca9a04d4e3d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Put also processing of control activation into initial timer check for possibly
pending mouse release event.
[ChangeLog][QtWidgets][QScrollBar] Fixed a bug where the valueChanged() signal
was emitted twice if a connected slot took too much time.
Task-number: QTBUG-42871
Change-Id: I7bad5279ef84463a033b55256d241d4445374081
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This fixes a regression introduced with
c09e9f71173a698670d6c728291ee24f53d50800 which caused the lineedit to
clear the whole text when an invalid character was entered into a lineedit
with an echo mode that was not Normal and a validator was set.
Now if undo() is called directly then it will still clear the text as it
is considered to be called as a user. Whereas the validation will take
care of the invalid entry by using internalUndo() as before which avoids
the clearing of the entire text.
Task-number: QTBUG-29318
Change-Id: I5ff5777a75ab864de2217441b5f518f50646bd8f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Add the source widget to the texture list (may be null for custom
compositor implementations that add textures not belonging to actual
widgets). This allows us to do proper checks with the
dirtyRenderToTextureWidgets list.
As a result paint events are only sent to a QOpenGLWidget if (1) there
was an update() for it or (2) it was actually marked dirty. (2) was
previously behaving differently: the widget got a paint event when
anything in the window has changed. This is fine for naive animating
OpenGL code but less ideal for QGraphicsView.
Bool properties like stacksOnTop are now stored in a flags value to
prevent future explosion of texture list fields and parameters.
Task-number: QTBUG-43178
Change-Id: I48cbcf93df72ac682c9b5d64982a8b648fe21ef3
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
The Qt bug tracker URL changes as part of the qt.io transition
Change-Id: Icb4ab198943b93639b5e3a8d99262303785c6459
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Add new enum items PM_HeaderDefaultSectionSizeHorizontal and
PM_HeaderDefaultSectionSizeVertical to QStyle and get corresponding
values in QHeaderView. This way we get rid of some magic constants in
QHeaderView and we can have reasonable values for the default section
size for high-DPI displays.
[ChangeLog][QtWidgets][QHeaderView] Default section size is now style-dependent by default.
[ChangeLog][QtWidgets][QHeaderView] Added resetDefaultSectionSize().
Change-Id: I44e152c5cf0bec1e5d78e1e62f47a2d1f761dfbf
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
The problem was that the span we stored in the multiCellMap was the
"effective" span (i.e. the given span subtracted with the number of
ignored rows it would span). Later we used that span to distribute its
size across all its cells. However, since the span now could be smaller
that the given span, we could sometimes fail to distribute to the last
span(s).
[ChangeLog][QtWidgets][layouts] Fixed a bug where spans sometimes didn't
distribute themselves to the last cells they covered.
Change-Id: I31db3d850484dc8b70d62c5f02f680740578c661
Task-number: QTBUG-43099
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
When setting a left corner widget on a QMenuBar, the first
action rectangle is offset by its width and thus the width
should not be added to the size hint. Use QSize::expandedTo()
instead.
Task-number: QTBUG-36010
Change-Id: I660e3facbd0aeb5fb84fac8923db3e0c7998309d
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Strange API asymmetry that needed to be fixed.
Task-number: QTBUG-8315
[ChangeLog][QtWidgets][QAbstractScrollArea] A getter for the viewport
margins has been added.
Change-Id: Ie1460b572206922031fc4effc2aa8261e25088b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The sizeHintChanged() signal from the column and row delegates need to be
connected to the doItemsLayout() slot so that the view is updated when the
size hint changes.
Additionally doDelayedItemsLayout() is called to ensure that this is
up-to-date as the size hints may have changed when the new delegate was
set on the row or column.
Change-Id: I458293f05ce9ef40a03bdbcab1a6e7a10f648c89
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Kevin Puetz <PuetzKevinA@JohnDeere.com>
Remove duplication of the set of flags.
Remove "text" column which had a constant value.
Change-Id: I39dd541a545664fb3f992b32b8c64e4dd263a9c7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
sizeHint() did it exactly like this, but minimumSizeHint() didn't,
which made it too small. Didn't affect the actual size in most cases
since the vertical size policy is fixed, so sizeHint() is called instead.
But when writing a subclass, if one re-implements sizeHint() by
calling the QLineEdit's minimumSizeHint(), it would then be wrong,
when text margins are used.
Change-Id: I29ae8dcab00842b3b5ca534cdb250efc0b496f45
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
When a popup is opened it grabs the input, but the leave event to the other
windows needs to be sent.
Remove the popupEnterLeave test as it did not test any code. The Popup
never gets any enter or leave events so it will succeed always succeed
Task-number: QTBUG-36862
Change-Id: I625c616eeb74b5168af7b751485e2a9a53b76cd3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
customMenuFont was null, so objects was an empty array, and
NSDictionary throws an exception when being called with arrays
of different sizes.
Task-number: QTBUG-42728
Change-Id: I8cdab449fd8c1d12b65c46dd5617a7f5e3e96c6e
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Change-Id: I7147d326b0f5bb218f4dbc013ed82efb4c1e1440
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
Place the rubberband over the tabs instead of where the hidden
subwindows happen to be.
[ChangeLog][QtWidgets][QMdiArea] Fix rubberband position for tabbed mdi windows
Task-number: QTBUG-42612
Change-Id: I41e81ab8b99ab9e0fa533fd4ed1b2a8141d19753
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Prepare for determining the suitable number of touch points
from the device type. For now, 2 points are used as
before, which can be overridden by setting the environment
variable QT_PAN_TOUCHPOINTS. Add member variable
to QPanGesturePrivate which is set on gesture creation and later
used for comparison.
Task-number: QTBUG-40461
Change-Id: I6d9e35ca752375bc6a54435482ca0925195b8142
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
This is required so we can take a QVariant and detect that it contains a
Q_GADGET and then use method like QMetaType::metaObject and QMetaProperty::write
with the QVariant::data
Change-Id: I3603692e4e84426e10bf59949e3def3ea4947bec
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
