Backtrace logging tests were not passing for arm. Added compile option
-funwind-tables to support backtrace on arm.
Task-number: QTBUG-59966
Change-Id: I5e2443b1e3a644a239dab68db990e75ae8fade24
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Alignment test was not compiling or passing on GCC / arm
- Using C++11 alignas() enforces maximum limit for the alignment, which
at least on GCC / arm is __BIGGEST_ALIGNMENT__ multiplied by 8
- On GCC 6.2.0 / x86_84, maximum alignment accepted by alignas is 128
- On GCC 5.3.0 / arm, maximum alignment accepted by alignas is 64
- This change calculates biggest tested alignment on ARM targets
and compilers supporting alignas() to the value calculated
from __BIGGEST_ALIGNMENT__
Task-number: QTBUG-55492
Change-Id: If2b70000ff9cdc5ae8c5a00e39f79efcc6ba1221
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qemu does not report /proc/self/maps size correctly. Added expected
failure for it
Change-Id: I4019884702b8f9a33717b02e79c9e0c042b2449f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The SHA3 family is a modified version of Keccak. We were
incorrectly calculating Keccak (and even *testing* Keccak!),
but claiming it was SHA3.
To actually calculate SHA3, we need invoke Keccak on the original
message followed by the two bits sequence 0b01, cf. §6.1 [1].
[1] http://dx.doi.org/10.6028/NIST.FIPS.202
[ChangeLog][QtCore][QCryptographicHash] QCryptographicHash now
properly calculates SHA3 message digests. Before, when asked
to calculate a SHA3 digest, it calculated a Keccak digest instead.
Task-number: QTBUG-59770
Change-Id: Iae694d1a1668aa676922e3e00a292cddc30d3e0d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unix mmap(2) system calls do allow for mapping beyond the end of the
file, though what happens after you try to dereference the pointers it
gives is unspecified. POSIX[1] says that implementations shouldn't allow
it:
The system shall always zero-fill any partial page at the end of an
object. Further, the system shall never write out any modified portions
of the last page of an object which are beyond its end. References
within the address range starting at pa and continuing for len bytes to
whole pages following the end of an object shall result in delivery of
a SIGBUS signal.
However, Linux allows this in read-write mode and extends the file
(depending on the filesystem).
Windows MapViewOfFile never allows mapping beyond the end.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/mmap.html
Change-Id: Ie67d35dff21147e99ad9fffd14acc8d9a1a0c38d
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Test tst_LargeFile::mapFile fails on Qemu for files over 4Gb.
Fixed by limiting maxSizeBits to 28 (must be n*4 and < 32).
- Bug QTBUG-21175 is also effective on ARM targets. Fixed by
expecting failure also on ARM.
Change-Id: I9103727e618a17259b4785ec8c284f3bb60ebea7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Ensures that numbers representable as 64-bit integer
are not printed using exponent notation.
Some JSON implementations such as the one of the Go
standard library expect this in the default
conversion to int.
Change-Id: Ic3ac718b7fd36462b4fcabbfb100a528a87798c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the respective modules aren't available we cannot build the tests
and examples. We drop the qtConfig(opengl) requirement for the opengl
examples as
a, we would need to make the QtGui configuration available for that to
work, and
b, we should not add too much detail to the tests and examples build
configurations. Checking each test and example for every feature it
uses would be too much.
Task-number: QTBUG-57255
Change-Id: Ifb043c81ec9e5c487765297bd65704812cd281fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
CustomTextWidgetIface marked its text() method as an override;
DropOnOddRows marked its canDropMimeData() as an override; each
neglected some other methods that are overrides. Convert
Q_DECL_OVERRIDE to the keyword in affected classes, to match.
Change-Id: I78b38e20a81e3e6aab282a1cb3d70cdf8a5f4135
Reviewed-by: Alexander Volkov <a.volkov@rusbitech.ru>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
mkdir(data2) depended on mkdir(data1) being run before, or it would
fail. In addition, the rmdir() test required the equivalent mkdir() test
being run before. So drop these annoying dependencies and make the tests
cleaner by having clear separation of the test data and merging the two
tests into one
The entryList() test still depends on the testdir being clean: it will
fail if mkdirRmdir() previously failed.
Change-Id: Iaddbecfbba5441c8b2e4fffd14a3e35972d2a3d8
Reviewed-by: David Faure <david.faure@kdab.com>
We don't load and save pointers usually because the pointer value cannot
be guaranteed to remain across program invocations. However, nullptr is
an exception: a null pointer is always a null pointer.
We don't actually have to read or write anything: there's only one value
possible for a std::nullptr_t and it is nullptr.
[ChangeLog][Important Behavior Changes] A QVariant containing a
std::nullptr_t is now streamable to/from QDataStream.
Task-number: QTBUG-59391
Change-Id: Iae839f6a131a4f0784bffffd14aa374f6475d283
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Task-number: QTBUG-59218
Change-Id: Ic839a36af1ecab39da0c3394c34181b6717e24e2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QUrl::isRelative(str) would be false for such files, so first check for
file existence before doing any URL parsing.
Change-Id: I51b6229251ad94877ac408b2f8018456d3e10a36
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit e0ea0f6178 optimized QChar <->
QString(Ref) comparisons by adding more overloads to avoid creating
QStrings from QChars just to compare them.
But these new overloads made existing comparisons to QChar ambiguous.
This was known at the time for QChar/int comparisons.
It has since turned out that also comparing to '\0' is ambiguous,
ie. not comparing to int or char per se is ambiguous, but comparing to
nullptr constants is, because QString(const char*) is just as good a
candidate as QChar(char)/QChar(int).
Since we allow QString/QChar comparisons, it seems logical to solve
the problem by adding QChar<->nullptr overloads.
[ChangeLog][QtCore][QChar] Disambiguated comparisons with nullptr
constants such as '\0', which 5.8.0 broke. As a consequence,
QChar<->int comparisons are no longer deprecated, as this was a failed
attempt at fixing the ambiguity.
Change-Id: I680dd509c2286e96894e13078899dbe3b2dd83bc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It has started failing recently on the CI, too.
Task-number: QTBUG-58745
Change-Id: I4c8834917e6455d00c300549ed448b06da75d5bc
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
in the vain hope to get the CI unstuck again.
Change-Id: I1b01bb1d59a8850f68d1d80838f5606f4159bcbd
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Fixes the bug in QFile which allowed opening a file with reserved
characters in its name. If the name is a long file path, CreateFile
opens a file with a truncated name instead of failing, so we have
to catch reserved characters ourselves.
[ChangeLog][Windows] Fixed a bug that caused QFile to create
files with truncated names if the file name was invalid. Now,
QFile::open correctly fails to create such files.
Task-number: QTBUG-57023
Change-Id: I01d5a7132054cecdfa839d0b8de06460039248a3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
By adding std::move where it makes sense.
This is not only good for move-only types, but for any type which
can be moved as it saves copies of the return value in any case.
[ChangeLog][moc] Move-only types are now supported as return types
of signals and slots.
Change-Id: Idc9453af993e7574a6bddd4a87210eddd3da48a9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It's a Qt 3 compatibility vehicle, and as such inherits the now-alien
property to distinguish empty and null strings. Particularly worrisome
is the following asymmetry:
QString("") == QString::null // false
QString("") == QString(QString::null) // true
Instead of fixing this behavior, recognize that people might use it as
a weird way to call isNull(), albeit one that once was idiomatic, and
simply deprecate everything that deals with QString::null.
[ChangeLog][QtCore][QString] QString::null is now deprecated. When
used to construct a QString, use QString() instead. When used to
compare to a QString, replace with QString::isNull().
Change-Id: I9f7e84a92522c75666da15f49324c500ae93af42
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Stale Lock files in the future can happen in some situations. For exemple
two computers with different clocks access the same file system. It could
be that one of the timestamp is totaly off (several years into the future).
[ChangeLog][QtCore][QLockFile] Fixed a deadlock occurring if a corrupted
lock file's modification time is in the future.
Change-Id: I8dac98a0e898c76bcef67f8c195e126c996b6add
Reviewed-by: David Faure <david.faure@kdab.com>
Commit fb376e0fcc removed an array that
facilitated returning the names of built-in types, to avoid the jump tables
from the switch statement. This commit brings it back but makes the array a
compile-time constant string offset table.
The array is created by way of a set of C++11 constexpr functions, so we
require that compiler feature. I've tested that MSVC 2015 does support
it as well as the ICC 17 when masquerading as MSVC 2015, so I've enabled
for that too. The only compiler left out is MSVC 2013.
If we didn't need to support MSVC 2015, this could have been written
more simply with C++14 relaxed constexpr.
This also adds unit tests to confirm that QMetaType::typeName() does
return null when we said it would. We're testing QMetaType::User-1
(which we'll likely never use) and QMetaType::LastWidgetsType-1 to
select something inside the range of the built-in types.
Task-number: QTBUG-58851
Change-Id: I4139d5f93dcb4b429ae9fffd14a33982891e2ac1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Let's take the beginning of the description: WaitForSingleObjectEx can
be up to 16 milliseconds early. This is proven by the fact that there
are tests doing:
wait(waitTime);
QVERIFY(timer.elapsed() >= waitTime - systemTimersResolution);
and failing.
Task-number: QTBUG-59337
Change-Id: Iae839f6a131a4f0784bffffd14a9a79523d69d94
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
ResultStore never actually exists, only ResutStoreBase does. So casting to
ResultStore<T> and calling its member functions is UB. Put the type dependent
function as template member functions within ResultStoreBase and so we don't
need QtPrivate::ResultStore anymore.
Same goes for the iterator.
Change-Id: I739b9d234ba2238977863df77fde3a4471a9abd2
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
For the windows file system engine, we add an extra macro to use
library loading if configured to do so, but avoid it on WinRT, as
none of the symbols would be found.
We also QT_REQUIRE_CONFIG(library) in the library headers and
exclude the sources from the build if library loading is disabled.
This, in turn, makes it necessary to clean up some header inclusions.
Change-Id: I2b152cb5b47a2658996b6f4702b038536a5704ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Parameters passed by value, like local function variables, are subject
to NRVO/return-by-move already, so adding std::move, even disguised as
qMove(), makes Clang warn about a pessimizing move.
Change-Id: I7d59bfee4cf7ecddee0874ee489367044c702643
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QLocale::matchingLocales() simply created each locale using the basic
data, without (unless the matching conditions stipulated Language C)
applying number-options hacks that it applies everywhere else, when
creating the C locale. Thus the C locale in its returned list (if it
wasn't the only entry) ended up with the default number options,
without omiting separators in numbers. Thus QLocale::c() didn't
actually appear as an entry in the list. Discovered while
investigating QTBUG-58947.
Added a dumb autotest that checks various ways of getting the C locale
do actually give us equal locale objects. Fixed matchingLocales() to
apply the same hack as is used elsewhere for the C locale.
Change-Id: I263f31da623052b63171f5b5a83c65802383df21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit eab7efd1 increased the timeout for this test, but apparently 10
seconds are still not enough. Set the timeout to a minute.
Task-number: QTBUG-59075
Change-Id: Iebab8e5c73c4858ca90063a82aedfbb2546a62cc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
C0 to DF take one continuation byte; E0 to EF take two.
It's invalid UTF-8 anyway, but at least this is what the test row meant:
overlong sequence with 3 bytes of what should have been two.
This updates the comment to match the character that we were actually
testing.
Change-Id: I85a8bd6da2c44f52b4e3fffd14a75df2600487aa
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Unlike setTimeSpec, this forgot to clear the bit when detaching. So it's
possible that some further use of the flags could incorrectly conclude
that the data was short and then proceed to corrupt the pointer.
The example from QTBUG-59061 caused this because toUTC() -> toTimeSpec()
calls setMSecsSinceEpoch which left the bit set; then addDays() calls
setDateTime(), which calls checkValidDateTime() and that corrupted the
pointer. This problem was more visible on 32-bit systems because no
QDateTime was short (except for default constructed ones), but it
can happen on 64-bit with sufficiently large dates.
Task-number: QTBUG-59061
Change-Id: Ibc5c715fda334a75bd2efffd14a562a375a4e69b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The call to trimmed() makes sense for URLs typed in a browser's location bar,
but its use in every code path made it impossible to open a file with a trailing
space in command-line tools that uses fromUserInput(cwd) to handle command-line
arguments, as recommended. For instance kde-open5 "file.txt " would fail.
Change-Id: Ie61182684521d91f077d3e76f95b7240965ab405
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows to test specific filenames without polluting the current dir.
Change-Id: Ieb99019a2e37e30f294d85c5d80af1de1b919019
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's only used in the autotests, and it private API, so
downgrade from Q_CORE_EXPORT to Q_AUTOTEST_EXPORT.
Fix a use of QTimeZonePrivate functions unprotected by
QT_BUILD_INTERNAL in tst_qtimezone.cpp.
Change-Id: I70eaea06f8fcf2983aeafb6894c3a5d2a4b272a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The cancel() function added in 5b11e43e for Qt 5.5 suffers from a
number of problems:
First, if runnable->autoDelete() is true, then the function suffers
from the ABA problem (see documentation written for trytake()).
Second, if runnable->autoDelete() is false, due to cancel() throwing
away crucial information instead of returning it, the caller cannot
know whether the runnable was canceled (and thus has to be deleted),
wasn't found or is currently executing (and thus mustn't be deleted),
or has finished executing (and can be used to extract the result).
Deprecate this dangerous API and replace it with the much more useful
Private::stealRunnable(), promoted to public API and renamed to
tryTake() for consistency with the rest of Qt.
Described the various caveats in the function's documentation.
[ChangeLog][QtCore][QThreadPool] The cancel() function suffers from
several subtle issues and has been replaced with a new tryTake()
function.
Change-Id: I93125935614087efa24b3e3969dd6718aeabaa4f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We define QT_STATICPLUGIN for the plugins in this case, so that they
define the factory functions needed to link them directly into the
test.
Change-Id: I0f2de7bf6bec5a6d53ec9ad92536817c1221b7d5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We fully specialize QTypeInfo for most C++ built-in types,
but enums and extended integral types (like GCC's int128_t)
were not covered.
Now that we depend on <type_traits>, we can stop pessimizing
enums and extended integral types in QVector and QVLA by
defaulting QTypeInfo::isComplex to true for such types.
Fix a test that checked that enums were complex types. This should
have been a XFAIL test. Enums are not complex types.
Change-Id: Ibb0fb38cc83e980a428b5573d1db5666593418ae
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Some format and parse tests for time and date-time depended on locale
but had test data for the C locale (so fail if the test-environment
has, e.g., LANG=de_DE@utf8). So impose the C locale (until Qt 6).
The date-time test did *some* attempts at fixing for locale, but
failed to handle am/pm; and we do have "### Qt 6" comments in
Q(Date|Time)+::fromString indicating that we intend to switch these
methods to use the C locale by default (which shall fix this once and
for all). So rip out the incomplete localization now and test we work
properly at least when the locale used *is* C. Add a comment to the
matching QDate test to rip out its (presently adequate) matching code
once we do get to Qt 6 and make fromString() use the C locale.
QDateTimeParser uses systemLocale(), which is initialized the first
time it gets accessed; so we need to frob the locale *early*; doing so
in the test-class constructor is about as early as we conveniently
can; and seems to work (while doing it in individual tests does not).
(There is no point rolling back at the end; the QSystemLocale global
has been set up by then, so the roll-back would merely leave the
global out of sync with setlocale() and the environment.)
Task-number: QTBUG-58728
Change-Id: Ifa6778a80276050a099387a6dab15a1096be7561
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
AİİA.pdf takes 8 QChars, but after lowercasing it takes 10, so the code cannot
assume the length to be the same.
Task-number: QTBUG-58822
Change-Id: Id6fbb99f6afd08ee420099cd66372732d7598d9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Like the lvalue QVector::append() overload, when we reallocate,
we need to take a copy of the function's argument because the
reference will get stale upon reallocation.
Add a test.
[ChangeLog][QtCore][QVarLengthArray] Fixed a bug involving
appending an item already in the container to the container
again.
Change-Id: I06eeed6cb383dd5924e47a302bb3d1666d04c8e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Automount filesystems like /home on many operating systems (QNX and
OpenIndiana, at least) don't like if you try to mkdir in them, even if
the file path already exists. OpenIndiana even gives you an ENOSYS
error.
So instead, let's try to mkdir our target, if we fail because of ENOENT,
we try to create the parent, then try again.
Task-number: QTBUG-58390
Change-Id: Ibe5b1b60c6ea47e19612fffd149cce81589b0acd
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Systematic testing in tst_QStringApiSymmetry revealed a bug in
QStringRef::toLatin1(): a null input did not result in a null output,
but an empty one. This is fixed, for consistency with
QString::toLatin1(), and QString(Ref)::toUtf8(), which behaved
correctly already.
The same bug was found in QString(Ref)::toLocal8Bit(), which is
particularly hideous, as it's documented to fall back to toLatin1(),
which preserves null inputs. Fixed, too.
[ChangeLog][QtCore][QString] toLocal8Bit() now preserves nullness of
the input QString (outputs null QByteArray).
[ChangeLog][QtCore][QStringRef] toLocal8Bit() and toLatin1() now
preserve nullness of the input QStringRef (output null QByteArrays).
Change-Id: I7026211922c287e03d07e89edbad2987aa646e51
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tst_QDateTime::operator_insert_extract() was setting the time-zone and
taking care to restore it at the end of the test; however, if the test
were to fail, the restore would be skipped. Package the zone-setting
and restore in a class instance, so that premature return can't bypass
the restore.
Change-Id: I3df63260da17e481ef4d0d107d9f0fdea3e147e7
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
We keep the runnables from finishing by having them block
on a QSemaphore::acquire() call inside run().
If we fail a test that precedes the call to sem.release()
further into the test, the early return will cause the
thread pool to be destroyed, which will then attempt to
wait for the runnables to finished, which, in turn wait
for the semaphore to be released.
-> dead lock
Fix by introducing a RAII object to release the semaphore
with a sufficiently large number to unblock all runnables.
That number will in some situations be too large, but that
does not matter.
Change-Id: I1ec7e29b37bc36309e93e6e30708cc7db3c9579c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In order to get reproducible runs of the test, we need to
wait in the main thread until all runnables have started
executing. Otherwise, what the cancel() loop below actually
does will vary from run to run.
Change-Id: Ib912b0943e7bbd55c9480ae6fd4011ba20ac457e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of allocating a statically-sized array on the heap,
use an automatic C array instead.
Replace some magic numbers with named constants.
Change-Id: I17d29a76a67c4a413453ac26a5dee8cd54a8a37d
Reviewed-by: David Faure <david.faure@kdab.com>
Manipulating a simple int from multiple threads is a data race,
thus undefined behavior.
Fix by using QAtomicInt and atomic operations instead.
Change-Id: I5418bc260da57fe353a71b8e5c7c1c97adbe7597
Reviewed-by: David Faure <david.faure@kdab.com>
This should reduce the failure rate. We're still doing qSleep of the
same amount of time, but we now only fail if the slip is over 100 ms.
Task-number: QTBUG-58713
Change-Id: I536c32a88bff44dab37afffd14a1afdf0b2e522a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
currencySymbol == "$" does not mean negative currency values will be formatted
as "($value)". With all locales I have on my mac machines (10.11/10.12) the
result is different from what this test expects. Also, the results are very
different for different locales. Apparently, we never saw this problem before
since in our CI "macs" we never have US Dollar/en_US selected in System Preferences.
Task-number: QTBUG-58784
Change-Id: Ic2c3a3172bf1e715e99092ddee8f461b216d995a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The runUpdateMimeDatabase() call was timing out on the CI due to
running out of the default 30s timeout for QProcess::waitForFinished()
(on my machine, that call takes less than 0.5s, reliably...).
Increase to two minutes.
Change-Id: I61b2e060ea9c2508b853847ba7040ad499e0084c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
When one of the QCOMPAREs in Consumer::run() fails, the consumer
returns early, leaving the producer deadlocked in a QSemaphore's
acquire() call. Change these to tryAcquire() with a large timeout,
so the producer, too, eventually leaves run().
Change-Id: I7421d43305decd4754e09c8e092363594d1be06b
Reviewed-by: David Faure <david.faure@kdab.com>
This test was determined to be flaky on the CI.
Task-number: QTBUG-58741
Change-Id: I43196d3a27f726fb96b427f5071e726b571a0404
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Add proper support for 'so' and 'bundle' suffixes. Qt wrongly assumes
.so libraries are not versioned on Apple platforms, which is
wrong. Also, the shared library .bundle which is what Apple recommends
instead of .so, are also versioned (not to be confound with the
different Core Foundation bundles, which are directory hierarchy).
For more info, see http://docstore.mik.ua/orelly/unix3/mac/ch05_03.htm.
Especially the part that reads:
"Loadable modules, called bundles in Mac OS X, have the file type
MH_BUNDLE. Most Unix-based software ports usually produce bundles with a
.so extension, for the sake of consistency across platforms. Although
Apple recommends giving bundles a .bundle extension, it isn't
mandatory."
Task-number: QTBUG-50446
Change-Id: Iacd5136397a12d65d83821434f332eb602550b4b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit b0c1e07d64.
The unit tests it introduced trigger errors with the macOS and
Win32 implementations, which means the there's something seriously
wrong with either the API, our implementation or the tests.
Revert for now until this gets fixed. Blacklisting was also the
wrong tool to use. The tests should have used QEXPECT_FAIL.
Change-Id: Ida20c6bbe0c019835a22464535029585e8e1e367
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There weren't any, at all.
Testing on the CI showed that the implementation is broken on
macOS, and, to a lesser extent, on Windows, so blacklist the
failing tests until the implementation can be fixed. No need
to hold back testing the other implementations.
Task-number: QTBUG-58737
Change-Id: I9ae16ab778dbe2e95a6ca5e0bae00df4bad65cb2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test was determined to be flaky on the CI, depite attempts
to stabilize it (b750a3786f).
Task-number: QTBUG-58745
Change-Id: I933199cd537002699906147d172bb797f1dc90c1
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This test was determined to be flaky on the CI.
Task-number: QTBUG-58713
Change-Id: Ie6e6a69b8ea625e3a3102c88d52f1f0fbec242aa
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When a non-QString-backed mode (via the (QChar*, int) ctor) was added
for Qt 4.5, the author forgot to adjust the setCaseSensitivity()
function. It still uses q_pattern instead of (p.uc, p.len) as the
pattern for which to create the skip-table. Since there is no
setPattern() overload for this mode, the correctness of the matcher is
not harmed by this, but its performance degrades to that of a linear
scan: the skip-table, being filled from an empty pattern, will be
all-zeros, sending bm_find() into the 'possible match' case at every
character.
Since matching is still correct, but slow, it's not possible to write
a test for this. I did, however, leave my attempts in the auto-test,
for when we add QStringView overloads of setPattern() which will then
be able to expose the bug.
Change-Id: I7b803e8624b0352a0a974900affbbfc0c260d93b
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When a QFile object is reused, the atEnd() method may return incorrect
values. The reason for this is that QFileDevicePrivate::cachedSize is
not cleared. Setting cachedSize = 0 in the close() method fixes this issue.
Task-number: QTBUG-57698
Change-Id: I828a2cf844e98d581098f2c781fa47d2cd3275ce
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
At 200 ms, the error on first firing could be 10 ms.
Task-number: QTBUG-58519
Change-Id: Ifaee7464122d402991b6fffd14a02a4ce782f11f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
On macOS, the code that read the plist is using
QByteArray::fromRawCFData. When we return the data directly
we need to detach the QByteArray so that it does not point
CFData's data that will get deallocated just after the call.
Task-number: QTBUG-58531
Change-Id: If829a304b986c99c8fc2aeeb992f2d539a4eef3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
As used in recent qtdeclarative commits, so better make sure it keeps working.
Change-Id: I6d0ceda76201e3e7f75661cb6449e1ff32329126
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There was a test that tested this, but was wrong.
[ChangeLog][QtCore][QVariant] Fixed a bug that caused wrong results for
comparisons of QVariants containing either NaN or infinite numbers.
Task-number: QTBUG-56073
Change-Id: I33dc971f005a4848bb8ffffd1475d29d00dd1b7f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This constitutes a fairly complete submission of an entirely new
floating point type which conforms to IEEE 754 as a 16-bit storage
class. Conversion between qfloat16 and float is currently performed
through a sequence of lookup tables. Global-level functions
qRound(), qRound64(), qFuzzyCompare(), qFuzzyIsNull(), and
qIsNull() each with a qfloat16 parameter have been included
for completeness.
[ChangeLog][QtCore] Added new qfloat16 class.
Change-Id: Ia52eb27846965c14f8140c00faf5ba33c9443976
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Under certain circumstances, VS2015 reported ambiguous options in using
the operator>(Enum,int) operator. This change adds a static_cast<qint64>
to remove any ambiguity. In the process of testing this change, a gap
in the existing logic was identified: the handling (just in the test
code) of large negative enum values. Consequently, and additional
test case was added, and additional if-conditions were added to account
for that case.
Change-Id: Ife2c471ba4caa4b9a0107722042114e58145c4d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The first one was already suppressed for GCC, so also do that for clang:
/Users/erik/dev/qt5-dev/qtbase/tests/auto/corelib/tools/qstring/tst_qstring.cpp:1076:16: warning: format string is not a string literal (potentially insecure)
[-Wformat-security]
a.sprintf( zero );
^~~~
/Users/erik/dev/qt5-dev/qtbase/tests/auto/corelib/tools/qstring/tst_qstring.cpp:1076:16: note: treat the string as an argument to avoid this
a.sprintf( zero );
^
"%s",
The second one could also occur with other compilers, so fix it in a
generic way.
/Users/erik/dev/qt5-dev/qtbase/tests/auto/corelib/tools/qstring/tst_qstring.cpp:6382:5: warning: ignoring return value of function declared with
warn_unused_result attribute [-Wunused-result]
string.repeated(3);
^~~~~~~~~~~~~~~ ~
2 warnings generated.
Change-Id: Id999179e795580a37b5be673ee54d6fa1a006dd7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Because on Windows, the .ini files are saved with CRLF, but the files in
the Qt resource are just LF (.gitattributes makes them so).
Task-number: QTBUG-25446
Change-Id: I5eab0d9620bd1ba675b0a87c554f62cef0f98fcc
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- port from inefficient QLists to QVector
- mark types held in Qt containers (incl. QVariant) as Q_MOVABLE/PRIMITIVE_TYPE
- remove pointless user-defined copy special members which prevent the class
from having nothrow move special members
Fixes errors reported by my local tree's static checks.
Change-Id: If3910484cea81a8e2c5ab737908c9443f75782c5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There was an off-by-one error in the while loop for aarch64: we start
counting at 0 for the first position, so the last valid input position
is "a+7", not 8.
This wasn't covered by the tests, nor was the SSE2 version, so now there
are also tests for both versions.
Change-Id: I7eb8c5708e6179f45ea56885b0e66e1a37969c1d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Implements isNull for QVariants of a nullptr so they always return
true to isNull(), instead of depending on how they were constructed.
Task-number: QTBUG-58296
Change-Id: Ibddec795cdadedef7e17d22c265c29e752d8f99f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Do not wait up to the timeout ms after already having waited several
times. At the same time upgrade to using the QDeadlineTimer which
is designed for this purpose.
Change-Id: Iaf5e4f4655605d5143ce91040c6eb6706752e504
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the qWait() and introduce a QTRY_COMPARE()
checking for the end value first.
Task-number: QTBUG-58402
Change-Id: I2d3758178de5f67881008f28c406076ad27c4a90
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Use QTRY_COMPARE with a timeout to check for the stopped state
unless BAD_TIMER_RESOLUTION is defined.
This speeds up the test by 1s and prints diagnostic information
should an interval be too short (as seems to be the case on macOS,
currently).
Change-Id: I8f884cd66ad33314124d3130d9f49606e6dfe9f3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
[ChangeLog][QtCore][QFileSelector] Removed the requirement for an unused
default base file in case you want to load only a variant.
When the base file (e.g. /image.jpg) was missing, no selectors were
considered and it was not possible to load variants of this file (e.g.
/+android/image.jpg, /+android/+tablet/image.jpg) without specifying the
directory as well.
As a work around, one previously had to place a default file in
the base location, which is undesirable in some cases because:
1. The extra file consumes unnecessary space.
2. It is impossible to encapsulate platform-specific implementation
details by hiding files in a subdirectory.
Task-number: QTBUG-51230
Change-Id: I4c7f9ec952bff6e5b7738d8cabe3c762c208a38e
Reviewed-by: Robin Burchell <robin.burchell@crimson.no>
This is a version of QByteArrayMatcher that calculates the
Boyer-Moore skip table at compile-time instead of at run-time,
making this class more generally applicable than QByteArray-
Matcher itself, at least for statically-known strings.
The compile-time part requires C++14 constexpr support, but
the class should compile and work even in C++98 mode, just
with runtime initialization of the skip-table.
While touching tst_qbytearraymatcher, clean up the static
global QByteArrayMatchers there and add tests with needles
longer than 255 characters for QByteArrayMatcher, too.
[ChangeLog][QtCore] Added QStaticByteArrayMatcher.
Change-Id: I0662f262ab19b79ae4096f3ab384d5b3ada72347
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtBase][General] Removed support for WinRT/Windows Phone 8.1.
Task-number: QTBUG-57288
Change-Id: Ifd6d6780cbbdb710d99556ba3d2fb2e514d4f789
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
C++17 adopts P0021R1[1], which makes noexcept be part of the function
pointer's type and thus be overloadable. It contains some provisions for
allowing a noexcept function pointer to cast implicitly to a non-
noexcept function pointer, but that fails in the presence of templates
and additional overloads that could match the type in question.
Fortunately, the paper proposed a test macro, so we can change our
sources now and be compatible with both C++14 and C++17 rules.
This first failed with Clang 4.0 trunk. This source incompatibility is
not our fault, it's the language's doing.
[1] http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/p0012r1.html
Task-number: QTBUG-58054
Change-Id: I2bc52f3c7a574209b213fffd14988cf0b875be63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
