Initialiser lists were not tested before in the QVector rewrite, so
the older malloc call was left behind.
Also, std::initializer_list has const iterators returning const data
and broke the build in a few places where const qualifiers were
missing.
Change-Id: I3c04e58361989aa7438621cda63c7df457d7dad8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Move the iterator classes into QArrayTypedData and add constBegin()
and constEnd() to that class.
I also had to add an operator T*() to the strict iterators, since
there are many places that expect the iterator to behave like a
pointer (including in QVector itself).
Change-Id: Icc5ed56ad47b013664a48eef9d31b5273aecb4e3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Use a unique QTemporaryDir instead of a fixed path for the test cache.
Change-Id: Ib664033a509a6cefd7c323708f80ef595b202178
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This autotest appears to be parallel-safe.
Change-Id: I12f9202633941e9339de0709353efb2b41df4fa1
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Previously, the append functions in QConcatenable in the QStringBuilder
dereferenced the data() pointer of the argument QLatin1String without
performing null check.
Change-Id: I629f19fbce3113f1f80f4272fa7ae34e1dbc6bee
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
tst_qlistwidget::fastScroll fails if the mouse cursor happens to be
over the tested widget, because that causes an item to highlight,
resulting in unexpected region of widget to be painted. Fixed by
forcing the mouse cursor off the widget before the test.
Task-number: QTBUG-24299
Change-Id: I8f45541feda44681179d43eda67d970d5fea4e40
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Should be sufficient to allow implementing the actual functionality in
xcb/cocoa/windows to match the Qt 4 level of tablet event support.
Task-number: QTBUG-25864
Change-Id: Iebcca256dfba841d8976b58fda1b76026d3133a3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Use a QTemporaryDir for a unique test cache directory for each process,
rather than a fixed path.
Change-Id: I64df8422d01282bbc108e942947c1b55368bd941
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
tst_QStateMachine::postEventFromOtherThread() assumed that 10,000
iterations of the event loop in a separate thread could always be
completed successfully within the default QTRY_COMPARE timeout.
This may be false if the CPU load is already high - such as when running
other tests concurrently.
Decrease the iteration count.
Change-Id: I780523f73c0c16fa0b2ab3201b2b0affdebc198d
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Write to a QTemporaryDir instead of the test's build directory.
Change-Id: Ib65a0d58fbdf8caf8f2cb7002aeed1ce34742183
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This test failed a parallel stress test, but seemingly only because it
writes to its own build directory. This should not interfere with other
running autotests.
Change-Id: I27a2f31e32a5b8157ef1082cf0e939bcc0c61c70
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This test failed a parallel stress test, but seemingly only because it
writes to its own build directory. This should not interfere with other
running autotests.
Change-Id: I80e548fdb0e915ebe86dcd2205537cb6fee09cff
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This autotest appears to be parallel-safe. It fails our parallel stress
test, but only because it writes to its own build directory. This
should not interfere with other autotests.
Change-Id: Ie99dde24edc0fda0c8ec4352a6e44abb7cbc54f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
* Merge the two public ctors.
* Use bitflags instead of shifting bits (more readable).
* Add autotest
* Use int datatype for the "stretch setters". (values out of bounds are clamped)
Streaming to QDataStream will still use the Qt 4 format.
Task-number: QTBUG-25100
Change-Id: Iecb1e78cb12717e4d84448484c3ad8ca469d571a
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
A previous commit changed the Mac behaviour for printerName()
from returning the CUPS Description to returning the CUPS Name.
In case anyone was relying on this for a human-readable name
add new api to return the CUPS Description. Also add the
Location and Make and Model which will be used in the Unix
print dialog instead of directly calling CUPS.
Change-Id: I9901bf8d6368466adf111580f5db5a3f01ca9170
Reviewed-by: Teemu Katajisto <teemu.katajisto@digia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: John Layt <jlayt@kde.org>
We'd like to decrease the default timeout for tests in the Qt Project CI
so that we waste less time waiting for hanging tests.
Tests which genuinely take a long time to run, such as these, should
have their timeout explicitly set in their .pro file.
Change-Id: I4fe6249e9efa764b230251d73a1115c24411e168
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Use a QTemporaryDir instead of the system-wide temporary directory.
The test is still not entirely parallel-safe (at least on X11) due to
requiring the shown dialog to have keyboard focus.
Change-Id: I628dc6ab52dda49f6957a301eea8944bb9d81453
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Use a QTemporaryDir for temporary files, instead of the current working
directory.
Change-Id: Ifeb2944238f785a1f7beb0dc2a7c1e092d121db5
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This autotest seems to be parallel-safe. It was not marked as such due
to an issue which rarely causes the test to hang on exit on Windows, but
that appears unrelated to whether or not the test is run in parallel.
Change-Id: I30bac75be3ddc14139594605481eb6af3f6795e7
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This autotest fails a parallel-stress test because it writes into its
own source/build directory. However, by inspection, it appears not
likely to cause issues with any tests other than itself.
Change-Id: I13789ba14bab240d34c22c5b77d6407995423afc
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Changed one testfunction to use the test's own QTemporaryDir instead of
the system-wide temporary directory.
Change-Id: I6740a7f4ba7f53174cd0730239d8dc088e5111ba
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Ensure we always use a unique filename when writing to test files.
The test already contained code for this, but it was not applied in a
couple of places.
Change-Id: I1e29ee162c390e014688ab46e3658e2a463d203e
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
In QTreeViewPrivate::adjustViewOptionsForIndex() wrong index had been
used when referencing to array of viewItems. Variable row is set to the
index of the QModelIndex, however it is not as same as the index in
viewItems[] when there was hidden item in treeWidget. Index of viewItems[]
should be used here. Unit test is added as well.
Change-Id: Idc7eda979e7d09c5a07bd6dffd92b7abbac10e67
Task-Id: QTBUG-25333
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
tst_qprocess::lockupsInStartDetached sometimes locks up on mac.
Mark this as a known issue.
Task-number: QTBUG-25895
Change-Id: I08b1bcf39f2bf373e74509a06415d9ba514b8993
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
There is a message check in QStatusBar::showMessage causing the call exits
early if the new 'message' is the same
as the current message. The check has been removed, and new timeout will
always take effect. Unit test is added as well.
Change-Id: I3a03c6842835824caba4adc37c3ed834952c4bb2
Task-Id: QTBUG-25492
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Changed checking of the start position so that it does not call d->control->text() because this removes blank characters when an input mask is used. Thus the
selection fails. Instead d->control->end() is used for checking the start position.
Task-number: QTBUG-16850
Change-Id: I62992fb81bd47d432bade9f219782d48eb309956
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Much of the current QPrinterInfo tests fail due to being dependent on
specific physical or network printers being attached. This change
removes all printer specific tests and replaces them with generic
tests that will use whatever printers are installed.
Note if no printers are installed then the tests will still pass. A
later change will add virtual printers to test returned results are
correct.
Windows test code is also required and will come later.
This does not yet remove the "insignificant" status from the test,
further improvements and code fixes are still required.
Change-Id: I60802445924edb126aadf78337a8cb6f2f3b3d37
Reviewed-by: John Layt <jlayt@kde.org>
Change the way the printsupport plugin creates QPrinterInfo
objects, provide platform api to return a named printer, and
expose this as static public api in QPrinterInfo.
Only the Mac plugin used the old api, the other plugins will
have direct support added in separate commits, but will use
the default implementation for now.
Change-Id: I7d6b6556eb39919cfb15bc0e814afbaf13c5712c
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
MSVC2010 32-bit (with and without service pack 1) takes about 1 hour to
compile this file in some builds, since
1c7421ad14.
Avoid the relevant portion of the code just for these compilers.
Change-Id: Icbb4fa12a6d563a7cdc882c30cdb5705675bedb0
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Mac in Qt4 and 5 has been using the PMPrinter Name for the QPrinter
and QPrinterInfo printerName() value, but this is incorrect. This
is in fact the CUPS Description field, is in human readable form
and is not guaranteed to be unique. The CUPS Name field is the
PMPrinter ID value and should be used as the unique identifier
when accessing printers. This has worked up to now due to an
undocumented feature in the OSX api that accepted the Name when
the ID should be used.
Changing all uses of PMPrinterGetName to PMPrinterGetID fixes this
and allows the QPrinterInfo test of names to pass without
munging the names.
Change-Id: I25322aa1a924bed9f67f4ad5e208274c8b700e17
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: John Layt <jlayt@kde.org>
Calling handleMouseEvent() with w == 0 implies that the local position
is bogus and instead it should be calculated from the global position
once the target window is known.
Change-Id: If173d0570f6dcc8b7bc5d6f21fa1f69d06d9d702
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
Single signon code path gets the NTLM responses from the system,
so we can't predict the contents.
Task-number: QTBUG-25851
Change-Id: Ia8aa1741ae5af9e48643331bf9a3768550a30166
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
When given an invalid url, the output shouldn't be a valid url.
KDE's kurltest detected this regression compared to Qt4, where
all invalid urls were empty in toString() -- but we don't want that,
to give as much feedback as possible to the user.
Change-Id: Ie53e6e1c0a1d4bb9e12b820220dfb7e2f7753959
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These tests have failed a parallel stress test and may contribute to
instability in test runs.
Change-Id: Ibbbe01f7d9550b953fc9fbd6ed52fc99fdb5f5d7
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
It should return QWidget::inputMethodHints() instead of QVariant()
Change-Id: I01f5de8f2087ac67d125f54f08abed523653eb92
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Added #include <unistd.h> to tests/auto/network-settings.h,
so qtbase auto tests successfully build.
It is needed after the header dependency changes, part of gcc 4.7.
Change-Id: I76d1082f8454263f2c22c31a13aa3c1bf6a0c82f
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Remove all references to (un)checkAction.
This commit finalizes the intended change.
Change-Id: I79d3b30b5c3d9fbe276c2c94fed5971bb21d6c02
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
QChar is actually a ushort and passing it via const-ref is suboptimal
Change-Id: Ib806b90397de6a816142ed130a22c0fe10a85d79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This allows the QUrl component getters to return fully decoded data,
like they did in Qt 4. This is necessary for some use-cases where the
component like the user name, password or path are used outside the
context of a URL. In those contexts, the percent-encoded data makes no
sense, and the loss of data of what could be represented in a URL is
acceptable.
Also take the opportunity to expand the documentation of those getter
methods, explaining what the options argument does.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-May/003811.html
Change-Id: I89f743cde78c02f169c88314bff0768714341419
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This allows one to instruct QUrl to ignore the percent-encodings and
interpret the data exactly as provided. This is useful in certain
use-cases where the data comes from a non-URL context.
The strict-mode checking of the components is not implemented
yet. Currently, the behaviour is equal to that of TolerantMode.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-May/003811.html
Change-Id: Ia5abe045a8ce7f9b50cbce3b5a7e3735e068d03a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Since we're about to introduce QUrl::FullyDecoded, this
QUrl::MostDecoded value would be confusing. Replace its uses with what
was intended at the point in question.
Change-Id: Iefd87bc33d37bace507c5cb0f206fa902e08e2df
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This was trying all the possibilities by brute force, but it turns out
that some combinations are not valid so they should not be
tested. What's more, it was using old values of the flags, so this was
actually testing nothing.
Change-Id: I6c2f5230d240fc23418df2d3a1ca905dbc47dd10
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
These tests have failed a parallel stress test and may contribute to
instability in test runs.
Change-Id: I2c4456ad7d3846c2262a0ba714ab8f0c9a05c597
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Change-Id: I5039e011f3c9b44ed1887424f11e4e146c3eb07f
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
