Use the built-in hex, showbase manipulator to format the number in
hex. Also, apply nospace() only once.
Change-Id: Id4b3d5f082ad13f52c8711408d7ec609bec3a621
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
This is much more useful than the URL "file:", it allows to use
"empty path" and "empty URL" for the same meaning (e.g. not set).
QFileDialog actually uses "file:" though, as the URL for the
"My Computer" item in the sidebar. This patch preserves that.
[ChangeLog][QtCore][QUrl] QUrl::fromLocalFile now returns an empty URL
if the input string is empty.
Change-Id: Ib5ce1a3cdf5f229368e5bcd83c62c1d1ac9f8a17
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old unix locking code is no longer working on unix since it locks on
a file descriptor, but QSaveFile creates a new file, and as a result we
get the lock on the wrong file. Also there is no need to keep the lock
held only for reading as QSaveFile is atomic. It just needs to be held
when doing a read before writing.
As a result, since we don't hold the same lock, there could be a race
with an application running an older version of Qt if they are writing
on the same configuration file.
[ChangeLog][QtCore][QSettings] Fixed data loss while writing the config
to the disk fails.
[ChangeLog][Important behavior changes] The locking mechanism inside
QSettings has changed and is no longer compatible with the one of
previous versions of Qt. There might be corruption if two applications
running different versions of Qt are writing to the same config file
at the same time. You must also now have write permissions in the
directory containing the settings file in order to write settings
Task-number: QTBUG-21739
Change-Id: I0844a5e96c8bc1e1222a3dac6cc48170ca77fe1b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The default in QTextStream is to use the C locale, so default
QTextStream are not affected. When you set a QLocale on it, the default
was to use group separators (which is the QLocale default too). This
commit makes QTextStream respect a QLocale in which the
OmitGroupSeparators option had been set.
Task-number: QTBUG-39956
Change-Id: I00fbe12fca7f0287c7217deb487ded6582a03b52
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Allow to alter the default configuration for categories by passing a
message type: All message types with lower severity are disabled in this
category.
This is useful for libraries, which shouldn't mess with the category
registry itself: Setting rules, a category filter ... might cause
conflicts and ordering problems, so this API should be reserved to the
specific application.
For the Qt categories, we have code in the default category filter that
disables the 'debug' category. However, this is hardcoded, and there's no
way so far for other libraries to get the same behavior. With this patch
one can get the same behavior:
Q_LOGGING_CATEGORY(DRIVER_USB_EVENTS, "driver.usb.events", QtWarningMsg);
[ChangeLog][QtCore][Logging] Added QtMsgType argument to QLoggingCategory
constructor and Q_LOGGING_CATEGORY macro that controls the default
category configuration.
Change-Id: Ib2902f755f9f7285d79888ec30e8f3cef95ae628
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
~QDebug() removes any trailing space if autoInsertSpaces() is true.
However, if one uses QDebugStateSaver the global autoInsertSpaces might
be false, but a space was added by a custom operator<<.
Explicitly check for this in QDebugStateSaverPrivate::restoreState. Remove
any trailing space if the local state asks for adding trailing spaces, but
the original one doesn't. Add a trailing space if the local state doesn't
ask for one, but the global state does.
Change-Id: I243b5c76d5ed2c1ec4820da35ab6e254da1551d9
Reviewed-by: David Faure <david.faure@kdab.com>
Passing this flag to QFileDevice::map() will allow writes to the mapped memory
without modifying the file that was mapped. These writes will be lost when the
memory is unmapped.
Change-Id: I7d46b044fc370585de8c06fdb4059f1f1be12d7d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This was prompted by https://git.reviewboard.kde.org/r/119221
Change-Id: Ia148f07f6d711df533693918bbedfa5e7dc02cd5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Similar to QTextStream::reset(), this resets the stream format to the
defaults. Its primary use is inside custom operator<< implementations,
where you'd want to have a fixed format regardless of the current
stream state.
Change-Id: I421d76c61f164579bb90cf4195cc5376e2dcf0f3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Allow the user to disable the quoting of QString, QByteArray,
QStringLiteral by passing a "noquote()" stream modifier.
This requires another flag to be added to QDebug::Stream. To
keep BC we're using the QMessageLogContext::version field
to differentiate between QDebug streams created by earlier
versions.
Task-number: QTBUG-37146
Change-Id: I9b215eabfcfd754af16ea87f3ef928d698e37d77
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check result in initTestData().
Previously, QFINDTESTDATA() was repeatedly invoked in init(). The
data-driven cd() test then failed when invoked stand-alone since
cd_data(), which relies on the data path, is executed before init().
Task-number: QTBUG-40067
Change-Id: I91039247e8dcaedd92fa990f1b5f82bc54b17c60
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Like for integers, this is activated only on QLocales other than C.
[ChangeLog][QtCore][QTextStream] QTextStream now uses group separators
when writing floating-point numbers when the locale is not the C locale.
The old behavior can be restored by setting QLocale::OmitGroupSeparator
on the locale.
Change-Id: Ie451b91017746c3a9b11b6211b2ddd09cd295cd2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Factor out code to clear all mappings into
QFSFileEnginePrivate::unmapAll() and call that
from QTemporaryFile.
Task-number: QTBUG-39976
Change-Id: Ic1ceeba0ba4451866f1081fee430e5c458c0819d
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The combination of these unstable tests makes it very
hard to get changes through the CI system due to the
unrelated test failures.
Skip the following test functions:
tst_QIODevice::unget QTBUG-39983 (Mac)
tst_QThreadPool:expiryTimeoutRace QTBUG-3786 (Windows)
tst_QLocalSocket::processConnection QTBUG-39986 (Mac)
tst_QTcpServer::adressReusable QTBUG-39985 (Linux)
Change-Id: I96559bea0d437fd25966b6ccac1ece1490e06241
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
The setting of (static) messageHandler to qDefaultMessageHandler if null
was happening in multiple threads simultaneously, so it needs synchronization.
Used an atomic pointer in case qInstallMessageHandler is called from a thread,
but more importantly, initialized the static vars right away.
Improve auto test to ensure that qInstallMessageHandler(0) still sets the
default message handler.
Change-Id: I70335af38c1d28a1cdba1df8a79c6006f227422e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
mkspecs/qnx-x86-qcc/qplatformdefs.h
src/corelib/global/qglobal.h
src/network/socket/qnativesocketengine_winrt.cpp
src/plugins/platforms/android/androidjniaccessibility.cpp
src/plugins/platforms/windows/qwindowswindow.cpp
Manually adjusted:
mkspecs/qnx-armle-v7-qcc/qplatformdefs.h
to include 9ce697f2d5
Thanks goes to Sergio for the qnx mkspecs adjustments.
Change-Id: I53b1fd6bc5bc884e5ee2c2b84975f58171a1cb8e
setEnabled() would race with isEnabled()/isDebugEnabled()/etc.
Change-Id: I2004cba81d5417a634b97f5c2f98d3a4ab71770d
Reviewed-by: David Faure <david.faure@kdab.com>
On Unix systems where the GUI event dispatcher uses a notification
system for socket notifiers that is out of band compared to select(),
it's possible for the QSocketNotifier to activate after the pipe has
been read from. When that happened, the ioctl(2) call with FIONREAD
might return 0 bytes available, which we interpreted to mean EOF.
Instead of doing that, always try to read at least one byte and examine
the returned byte count from read(2). If it returns 0, that's a real
EOF; if it returns -1 EWOULDBLOCK, we simply ignore the situation.
That's the case on OS X: the Cocoa event dispatcher uses CFSocket to get
notifications and those use kevent (and, apparently, an auxiliary
thread) instead of an in-thread select() or poll(). That means the event
loop would activate the QSocketNotifier even though there is nothing to
be read.
Task-number: QTBUG-39488
Change-Id: I1a58b5b1db7a47034fb36a78a005ebff96290efb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Some codecs can't handle the range outside ascii properly and would then
fail to read the data back in correctly.
Task-number: QTBUG-15543
Change-Id: I4c02921e787a939eeec0c7a11603b5896d756aef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If QNX does not have inotify there is no native engine.
Change-Id: I042efd0b59f916f9e0b55bbe5c7f3fe7bb6914c8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
[ChangeLog][QtCore][QSaveFile] Now follows symbolic links while writing to
a link instead of replacing the link with the contents.
Change-Id: I5afd519cb9f96ae68fa4c23c33a18de75671a301
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
The existing waitForNotified method has the design limitation that it
doesn't allow the tracking of multiple I/O operations on a single
file handle.
Therefore we introduce an additional method waitForAnyNotified that
returns a pointer to the triggered OVERLAPPED object.
Change-Id: I536ed7f6828daa2b0ce03f2d662eeb10aa89ca99
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
QLockFile "noPermissions" test is not applicable with root
privileges.
Change-Id: I5779da524f24d0f1b9ef519d654856a6200da6bf
Reviewed-by: David Faure <david.faure@kdab.com>
Some of the QSaveFile tests are not applicable with root privileges.
Change-Id: I1a22906c0b14acf144f1849719152dfe9d79f426
Reviewed-by: David Faure <david.faure@kdab.com>
It may return null during program exit, due to QCoreGlobalData global
static already having been destroyed. If that's the case, QTextStream
needs to fall back to Latin 1, like QString::toLocal8Bit and
fromLocal8Bit already do.
Task-number: QTBUG-38316
Change-Id: I5949c8dec15b60f4a13b5d9307ed6abfc799fe20
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The intent is to provide compile time validation of signals and to help
detect signal overloading in the future.
Change-Id: I9d5d46ed4b70c5d0cd407deb5928b1e76d37e007
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Useful for any application that can take URLs on the command-line, so that
full paths and relative paths can also be accepted.
Change-Id: I8a2c50f36d60bdc49c065b3065972fd5d45fa12a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On Windows, DataLocation currently returns the value obtained by
passing CSIDL_COMMON_APPDATA to SHGetSpecialFolderPath(). This is
the local non-roaming path. For actually storing settings, the roaming
path should be used (CSIDL_APPDATA). Introduce new AppDataLocation to
return that path and AppLocalDataLocation for the local path and deprecate
DataLocation.
[ChangeLog][QtCore][QStandardPaths] QStandardPaths now has new
enumeration values AppDataLocation, AppLocalDataLocation to be able
to differentiate between roaming and local paths on the Windows
operating system. DataLocation is deprecated in favor of AppDataLocation.
Task-number: QTBUG-38483
Change-Id: Ib1de8c7031a863ed5eac10c747de6f7ff1a090c7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Use QTRY_COMPARE for dirChangedSpy, remove all unneeded
remove()/setPermission() calls (originating from the time
the test did not use QTemporaryFile), add more QVERIFY()
and messages for the other operations.
Task-number: QTBUG-30943
Change-Id: Ib3b78b1c6922539fd5e9238aa017fcdb554aacc8
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Only accept lower-case "true" and "false", as documented.
The old check didn't match either the documentation, nor the QSettings/
QVariant behavior (where, for a boolean value, any lower-cased content
that not empty, "0" or "false" is considered true).
Change-Id: I317d29c16a27f862001b9dff02e8298df8acf5a6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Some data was never serialized (styleName, hintingPreference) and
some was incorrectly serialized (styleStrategy). This change also adds
auto tests for every applicable QDataStream version.
[ChangeLog][QtGui][QFont] QFont now serializes its data properly,
without any data loss.
Task-number: QTBUG-22814
Task-number: QTBUG-22946
Change-Id: I34e61b10662b7ad6c57054dacc7e1f522f5b5c5d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This patch aims to provide an updated test that follows changes started
in 10.7: new rule is that only root can access SystemScope settings. It
also disables the sync() workaround code path which is at least not
executed during the tst_QSettings execution and returns wrong value to
the test.
From Apple's documentation:
"Note that modification of some preferences domains (those not
belonging to the “Current User”) requires root privileges (or Admin
privileges prior to OS X v10.6)—see Authorization Services Programming
Guide for information on how to gain suitable privileges"
https://developer.apple.com/library/mac/documentation/CoreFoundation/Reference/CFPreferencesUtils/Reference/reference.html
[ChangeLog][QtCore][QSettings] QSettings now returns the correct value
for isWritable() when using SystemScope settings.
Task-number: QTBUG-9824
Task-number: QTBUG-21062
Task-number: QTBUG-22745
Change-Id: Ib6a1490ec596b99d189ec4de9a0f28ecfd684172
Reviewed-by: Liang Qi <liang.qi@digia.com>
- Record the last event ID with every callback. This event ID is passed
to FSEventStreamCreate when restarting the stream, so the watcher will
receive all events that occurred since invalidating the previous stream.
- Never start with kFSEventStreamEventIdSinceNow, because this will
generate a (bogus) soft-assert in FSEventStreamFlushSync in CarbonCore
when no event occurred since stream creation. The last globally
generated event ID is used instead to simulate the "now".
- Do not dispose and recreate the stream in the callback, but use a
queued signal-slot connection to schedule this on thread that owns the
watcher.
Change-Id: I02f5a845d9e27f9853ed97925ab9c7a5bc0dede1
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Introduce function checking whether the system settings in
native format can be written to. If not, default to user scope or
skip the respective tests instead of failing.
Task-number: QTBUG-37822
Change-Id: I330aff9b79bb22254216f022af807e010bc8e8ba
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
