We don't know why it works, but we've been told that it fixes
some builds and we have no reason to think it will break others.
Task-number: QTBUG-52998
Change-Id: Iacaa1fb3c49e4d7aafd4167e591ff3724489872e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
our zlib header includes qglobal.h, so we need the qtcore include dirs,
and qtcore is also where the actual code is compiled into.
Change-Id: I09f530a1b4e6160438215a6d7223c0771ce94f05
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
this makes it fully consistent with INSTALLS.
note that this also removes the file name from the target path when
copying files, also for consistency.
Change-Id: I69042c9aa1e2cc81f8ff982343ba25688a04abfd
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
- QMAKE_FILE_IN_EXT as an alias for QMAKE_FILE_EXT, for consistency with
QMAKE_FILE_IN_BASE
- QMAKE_FILE_IN_NAME to make pairing _EXT/_BASE to get a full name
unnecessary (finally ...), and make use of it
- QMAKE_FILE_OUT_PATH, because i'll need it
Change-Id: I3d91ddb84f9cce52a665d562da11d165c92550c8
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
newer versions of qt creator understand QMAKE_EXTRA_COMPILERS and
INSTALLS, so there is no need to list the files twice.
Change-Id: Iccf3cc3248daf3422b8c366c2eb2d2f46c5f08d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the host compiler's version is not determined, so we cannot make any
assumptions about its capabilities.
Task-number: QTBUG-53017
Change-Id: I939fd7402b5daac73f2195b9d8763b9008bc7ea4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
this adds file_copies.prf, which understands the variable COPIES, which
works analogously to INSTALLS.
i've been holding this off for a long time, as it is not without
caveats. however, similar hacks are proliferating all over the code
base, so it's time we formalized it.
in fact, it's the easiest way to fix some nasty shadow build problems,
which is why i'm adding this on the stable branch.
Task-number: QTBUG-52256
Change-Id: Icbe3b9fbb79c952546aad2d467a438d3a69d749f
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This makes the -separate-debug-info configure optional functional, which
generates dSYM debug info bundles for Qt libraries on Apple platforms.
Task-number: QTBUG-37952
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Ia247674740bf450130a15db926df07fa9007e2ca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it doesn't appear to be referenced in any way, either.
Change-Id: Ifd30b435e3e628cd5e48ae24e9aef01c662d6d61
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Incidentally, this introduces QMAKE_RESOLVED_BUNDLE, which can be used
to determine the path of the bundle wrapper itself as well as the
executable target.
This is necessary for a subsequent patch adding support for
-separate-debug-info on Apple platforms.
Change-Id: Ia11430026b8e3f171e5db6677b190b8356832805
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We should really start using -L=/foo and -I=/foo inside of sysroots,
this test was preventing us from doing so (while arguably buying us
nothing).
Change-Id: If6e67631c585493871231e5d8a9354fa72e07343
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this flag specifies that the plugin does not track a qt module. this is
entirely unrelated to whether the plugin should be versioned.
amends f54a3d783.
Change-Id: Ibd3e9bedf488dc58e6354ccf7dd33d974e5f52c2
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
So far no capabilities (but internetClient for Windows 10) were added by
default, which forced developers to always manually edit the
WINRT_MANIFEST.capabilities(_device) property.
This allowed to leave out non-required capabilities and keep the created
manifest clean, examples being microphone for multimedia.
However, this also breaks first user experience as deeper knowledge
about this topic is required. Furthermore this is inconsistent with
other platforms like Android, where all capabilities are set by default
and developers need to edit the manifest manually in any case.
With this change, modules can define the capability set to enable all
features in the module. If developers want to disable some again, they
need to adapt the generated manifest. From our experience this needs to
be done in any case, latest at publishing stage when the store
manipulates the manifest.
Task-number: QTBUG-38802
Change-Id: I6d522268ee0afbfa00a30dbdd5e6ec9f415bebf3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Using Visual Studio a user very seldom wants to disable the automatic
invocation of windeployqt. Hence switch from opt-in behavior to opt-out.
This also fixes first user experience to invoke qmake –tp vc and then
hit run on examples.
[ChangeLog][Platform Specific Changes][qmake] qmake-generated Visual
Studio projects now automatically invoke windeployqt by default.
Task-number: QTBUG-52008
Change-Id: Iee1607269c38c7f6c726f554978ac05477bebe5e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it's likely that these will be wrong, and the bootstrapped tools usually
don't need them anyway. should they turn out necessary after all, we
need to add -H* variants of the flags.
Change-Id: I15c54c5e25d20ebd474073a530f00254842f515d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it is important that the flags coming from the current qt build appear
first, as otherwise a pre-existing qt installation may interfere with
the build.
the windows configure does not have any of this magic to start with.
Task-number: QTBUG-6351
Change-Id: Iacc1d9b5aa9eed9a5f0513baef9f6c6ffcef0735
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
unlike speculated in 2fe363514, this is not a workaround at all: it
causes that libraries' public link interfaces (LIBS) are exported in the
first place. unlike with staticlib, this does not export LIBS_PRIVATE,
so it wouldn't even be a particularly effective workaround for rpath
brokenness anyway.
the problem was pretty well hidden by the qt module system, which at the
level of libraries is pretty redundant with the .prl file handling,
which shows just how stupid the whole "design" is.
unlike before, we now enable explicitlib for all libraries, not just qt
modules - we enable create_prl for all of them as well, after all.
an immediate effect of this change is that it fixes linking on RaspPI:
the qtcore headers make the user code require linking libatomic, so we
must add it to our public link interface.
Task-number: QTBUG-51621
Change-Id: I5742c88694db8e8a9b79d17222dc6df2b38e5ab2
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
There is no test for c++ standard support for the host build
(only for the target compiler/build) which leads to trouble
in some cross compiling environments (old host compiler, new
cross compiler):
g++: error: unrecognized command line option ‘-std=c++1z’
So disable c++ standard compiler flags unconditionally for host builds.
Task-number: QTBUG-51644
Change-Id: Ifb3042e125fe199a7e081740d1171d26ccacf0c5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this is necessary for:
- generating -rpath-link arguments when link_prl is not used. link_prl
is enabled by default, so this has no effect on most projects.
- deployment purposes, which is hypothetical as of now.
Change-Id: I9e629f3eef93c4edf12efc016ecc27dbe2186d61
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Testcases and benchmarks are rather different entities. You won't usually want
to run benchmarks in the same environment you are wanting to run tests in,
so this feature allows to differentiate between the two.
We also add a "benchmark" make target (similar to check), which runs all
configured benchmarks.
Change-Id: I33759ce44c34e42a6a3a88f34e7b9c4372380721
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
turns out we need forwarding .pris in this case: without them,
QT_MODULE_INCLUDE_BASE points into the build dir, so we fail to find the
pre-generated headers.
an alternative would be writing primary module .pris which already take
that into account, but that would just add even more arcane code paths.
Task-number: QTBUG-51521
Change-Id: I59f2a0d3f2095c9dfa0a8d1cabfc007a30bd2d23
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
instead of unsetting the flag later on, don't set it in the first place.
Change-Id: Id448500b02b5c3e1dc7c332cc178a84c7fd2cfdc
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this has multiple consequences:
- we do sane DESTDIR replacement for debug_and_release builds, fixing
QTBUG-47313
- we don't create debug/release subdirectories, fixing QTBUG-47639. this
only makes sense given the complementary call of $$qt5LibraryTarget()
- we patch up the .prl files upon installation
Task-number: QTBUG-47313
Task-number: QTBUG-47639
Change-Id: Id409bbd26781a773409b94835ab6b97e71569322
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The feature is enabled by CONFIG += unsupported/objc_namespace,
but can be easily integrated into other build systems such as
CMake or native Xcode by modifying the LD and LDFLAGS equivalent
for each build system.
This is a less resource-intensive alternative to using multiple
Qt builds with different -qtnamespace settings.
Note: The feature is not supported in any way, and should be
used with care.
Change-Id: Ibb8ba1159db36efd7106c117cc2210c7e2e24784
Reviewed-by: Martin Smith <martin.smith@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Commit 6e6f27b6 made it possible to set the PKG_CONFIG variable using
CROSS_COMPILE as a prefix. The problem with that solution is that it makes
pkgConfigExecutable() skip the environment setup for pkg-config as well,
as it expects the pre-set command to be self-contained - which it isn't.
To avoid this problem we need to store the pkg-config define in the
device spec in a separate variable.
Change-Id: Id8ae7fb03d9253be55840e23fe73b30815ee86c3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
most module project files define two logical modules: a public one and
the corresponding private one. these are really separate modules as far
as qmake is concerned (even though the private one contains just
headers), and consequently have separate dependencies - QT and
QT_FOR_PRIVATE.
as public modules cannot depend on private ones, all private
dependencies would have to go to QT_FOR_PRIVATE, and a dependency on the
respective public module would have to be added to QT. this would be a
bit tedious, so we have a convenience feature which allows putting
private dependencies into QT, but automatically "downgrades" them to
their public counterpart when creating the public module's .pri file.
however, we failed to put verbatim versions of these private
dependencies into the private modules, which meant that these
dependencies were not pulled in transitively by the private modules'
users.
note that this entirely unrelated to QT_PRIVATE - this one defines the
private (non-propagated) dependencies of the module's implementation,
i.e., the libraries (and headers) that are not part of the link
interface. there is no QT_PRIVATE_FOR_PRIVATE, because there is
obviously no point in assigning the dependencies to a particular
logical submodule when neither one inherits them as far as the qt
module system is concerned.
Change-Id: Ib056b47dde3341ef9a52ffff13efaf8ef8e6817b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
save the actual library/framework name and framework paths in the .pri
file instead of computing them again at use time in qt.prf.
qt_no_framework_direct_includes inherently requires a use-time decision,
so this ugliness remains.
Change-Id: I09b2775e7d8e1d52e3af0d663e1babde10ae4814
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Without this, any test executable requiring a plugin path from
the environment's QT_PLUGIN_PATH will fail to run since the path is
overwritten when generating the 'make check' command, for example:
QT_PLUGIN_PATH=/path/to/qt/plugins \
LD_LIBRARY_PATH=/path/to/qt/lib${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH} \
./test_foo
A prepend config option is used for *PATH to preserve the envvar
value, so use the same option for QT_PLUGIN_PATH. The command above
then becomes:
QT_PLUGIN_PATH=/path/to/qt/plugins${QT_PLUGIN_PATH:+:$QT_PLUGIN_PATH} \
LD_LIBRARY_PATH=/path/to/qt/lib${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH} \
./test_foo
Change-Id: I69b43327974915eae52f299fc4001effe93a491a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
one reason to do that is some users' persistence in destroying their
non-prefix builds by trying an installation.
another reason is the fact that qt.pro's relative_qt_rpath is triggered
by the presence of an install rule for the target, which is of course
not helpful when the install dir is bogus.
Task-number: QTBUG-48406
Change-Id: I75f3940be79fcb5b86e34b975b789692423c92cb
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the main objective was to fix the bootstrap modules in framework builds.
bootstrapped modules which "borrow" headers from "proper" modules can
specify this in a clean way now.
a side effect of this is that the bootstrap-dbus module now has its own
syncqt call.
most includepath-related setup from qt_module_pris.prf was moved to
qt_module_headers.prf.
Change-Id: Ie0d8192cfac1a8cdae0ddd0bc0cd8c3092b1e85b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It only needs stdin now, instead of stdin plus a separate file containing
a list of file names.
Change-Id: I9f3db030001e47e4a4e5ffff1425b76884cc7ca0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
qtAddToolEnv() (via qtPrepareTool()) does not write the tool wrapper
scripts during build passes, while qt_docs.prf (which calls it for qdoc
and qhelpgenerator) was loaded only during build passes. the consequence
was that the makefiles tried calling non-existent scripts.
amends 5418d77a1, sort of.
Change-Id: I64ab573495ca339be4c7b5e8c6848b298b6cb605
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
now that we don't create .pc files for private modules any more, the
conditionals cannot be nested.
amends 6c5d227da, partially reverting aa20e7f9d.
Task-number: QTBUG-49763
Change-Id: I2578c83e0c767b6533abdb26bf4e8bcc8c416ef1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
judging by the history, this was only ever a workaround for poor rpath
handling. we're supposed to be over that.
Change-Id: I85601493a05a76ead999e707a2d2e9a430610981
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
proper prefix builds don't have the redundant .dlls in bin (the copy
step is simply omitted), so this is broken. the change would have to be
done atomically with making DLLDESTDIR sane.
This reverts commit 9b2e98245a.
Task-number: QTBUG-50065
Change-Id: I9ce0a2d1147a1a2d4bd2f22e619d5c737864a637
Reviewed-by: Romain Pokrzywka <romain.pokrzywka@gmail.com>
Reviewed-by: Tim Blechmann <tim@klingt.org>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
