When we auto resize it is handy to be able to limit the maximum
size (just like the minimum size).
[ChangeLog][QtWidgets][QHeaderView]A maximumSize for sections
has been introduced. The maximum section size is by default
the largest possible section size which in Qt 5.2 has been
limited to 1048575 pixels.
Task-number: QTBUG-4346
Change-Id: Ida9cbcc11bd5c4498e319df2e6379c69a7033c04
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QCheckBox cycles through the 3 states, but item delegates didn't
do that.
Change-Id: Iad1e464341033ca357925fe8064f53bb584459f4
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QTEST_NOOP_MAIN was removed in Qt 5, but was still in the source of the
QProcessEnvironment auto test.
Change-Id: I0048c330c9d4e99c46192cc05ffd3b77d404fb6d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
"Make QGuiApplication::exec() run within NSApplicationMain()"
"Make Qt process native and timer events on Cocoa applications"
"Cocoa: Fix QFontDialog, QColorDialog auto-tests"
This reverts commits
1e14762b8de4b2a0b4badf7944e7d7
Change-Id: I80b65b5ee0297b090f807bd420664233dfc44f7b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Before we went through non hidden indexes, but we never considered
the visual order. This patch fixes that issue.
Though it was wrong before, it probably never was a big problem
since it was unlikely that the tree (on logical index 0) was
swapped or hidden, but
658e42e77a
makes it more likely that problems with wrong focus could occur.
Change-Id: Ic7b6cd2df1f8638be1a7c9e6df27f428685869fc
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The new Cocoa event dispatcher made apparent some deficiencies in the
way the dialog helpers were being hidden. In particular, we would not stop
a dialog helper's modal loop when closing the dialog, resulting in the
auto-tests hanging. Also, since the QApplication event loop is runnig with
[NSApp run] in the stack, the previous workarounds are no longer needed.
Task-number: QTBUG-24321
Change-Id: Ifba713c286638d78a699c319a15683d09714f06f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
(dacf9961da)
In order to see 2 active threads, we must check activeThreadCount() before
the runnable finishes.
Change-Id: I1a48b41e0c1fd81a65d915b9bd1e741ff267ed2b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This extends the QLinkedList auto test. This is copy paste
with small edits from the QList auto test.
Change-Id: I5bce7ee304998d1c7258f11b2f31a7fb87706936
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add convenience methods for fromMSecsSinceEpoch() and
fromTime_t() to enable direct creation of other time specs
than LocalTime without the overhead of unncessary conversions.
For example instead of:
QDateTime dt = fromMSecsSinceEpoch(12345).toUtc();
the following saves two conversions:
QDateTime dt = fromMSecsSinceEpoch(12345, Qt:UTC);
This will improve the performance of the new QTimeZone class.
[ChangeLog][QtCore][QDateTime] Added convenience methods for
fromMSecsSinceEpoch() and fromTime_t() to take time spec to be used in
returned datetime.
Change-Id: I133635bfe3d35ee496a287257e13b2d600225a38
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The Qt::OffsetFromUtc TimeSpec was made public in Qt 4.4 but the access
methods were never made public in the apidox effectively meaning the
feature was never used. The implementation was also incomplete and
inconsistent.
This change cleans up the implementation and exports new public API for
using the TimeSpec using new method names consistent with the new
QTimeZone support.
This change increases the QDataStream Version number for Qt 5.2 to 15.
The behavior of one constructor has changed slightly to be consistent
with the rest of the feature, but this behavior was never documented.
[ChangeLog][QtCore][QDateTime] Fully implement support for Qt::TimeSpec
of Qt::OffsetFromUTC, added new methods for offsetFromUTC(),
toTimeSpec(), and toOffsetFromUTC().
Task-number: QTBUG-26161
Task-number: QTBUG-29666
Change-Id: If3cc7fc9778ca2b831644408ae749448d5975a3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
QButtonGroup emits signals on clicked, pressed and released for
buttons in the group, but for some (insuffienct) reason it did
not emit anything for toggle (the only signal that it didn't emit
anything for).
This patch changes that, by adding handling of that signal to
QButtonGroup.
Task-number: QTBUG-14857
Change-Id: I88bcd7b060b78c7ff05ea1adf7baaddfe6d463be
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Done with Jan Arve
Task-number: QTBUG-33104
Change-Id: I8319748536d448d1c37a26527ced53156d8c2f56
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Change-Id: Ia786d4fab64da974bb60f24c05325925d42a1e70
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
It's a nice feature to have.
MSVC also complains about using doubles to create enum values, so
the ugly workaround is:
enumValue = MyEnum(qRound(json["myEnumValue"].toDouble()));
[ChangeLog][QtCore][QJsonValue]Added QJsonValue::toInt().
Change-Id: I1a200b912abf66b2e96390b1980caff26cfa2685
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The documentation says that we scroll one pixel
Quote:
"QAbstractItemView::ScrollPerPixel (value 1)"
"The view will scroll the contents one pixel at a time."
However until now Qt has tried to be smarter than the
documentation, but is actually getting in the way of the user,
where a manual set value to setSingleStep will continuingly
be overwritten (on e.g resize).
This patch ensures the behavior described in the documentation
for the vertical headers - and leaves the control to the user.
[ChangeLog][QtWidgets][QAbstractItemView] QTBUG-7232 - In ItemViews
scrollbars will now by default only scroll 1 pixel when scrollMode
is set to scrollPerPixel. That is it will (when scrollMode is
scrollPerPixel) do what is stated in the documentation, and no
longer automatically adjust the scrollbars singleStep. The user
can now control that value.
Task-number: QTBUG-7232
Change-Id: I8a61d3100be65d0c4ee32aad58caed019aa2669c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The QCommandLineParser class provides a means for handling the command line options.
QCoreApplication provides the command-line arguments as a simple list of strings.
QCommandLineParser provides the ability to define a set of options, parse the
command-line arguments, and store which options have actually been used, as
well as option values.
Done-with: Laszlo Papp <lpapp@kde.org>
Change-Id: Ic7bebc10b3f8d8dd06ad0f4bb897c51d566e3b7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was inserted into the shared data (i.e all instances)
Change-Id: I655ccf04b1ad9bf82e6bfade58929538fa7df000
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch ensures correct detach when insert with an iterator is
called on a shared instance (i.e same behavior as QVector)
Change-Id: Id660eacd3cc7b633456dfa989997bbad747e1df2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Change-Id: Ib3cfb5363c86b400886c80b75b0c20ca854ce801
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before calls to erase on a shared instance would in release mode
imply that items were removed from the shared data (i.e all instances).
In debug mode it would assert.
This patch improves the behavior to detach and erase items
specified by the iterator(s) (i.e same behavior as QVector)
Change-Id: I89b69446cb1ffd43a98402b7ab1ec9a59bceb8e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Change-Id: Ia44db84fc1388d92308bf0d2b32539ac4d53850b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Since QSet uses QHash it improves QSet the same way.
Change-Id: I850b1efcf7bdfc85ceddb23128b048af95f75063
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTBUG-21051 has a testcase where activeThreadCount() could actually
end up at -1 (converted to an autotest in this commit).
The reason was: start() calls tryStart() which returns false due to
too many active threads (reserveThread() causes this), so it calls
enqueueTask() - which actually wakes up the waiting thread, but
it didn't decrement the number of waiting threads.
Note that tryStart() is "if I can grab a waiting thread, enqueue task and wake it"
while start(), in case tryStart() fails, wants to "enqueue, and then if I can grab
a waiting thread, wake it". This is why enqueue shouldn't wake; waking must happen
only if we can grab a thread (d->waitingThreads > 0).
Task-number: QTBUG-21051
Change-Id: I3d98337103031c9bdf0bf365295f245be0c66aa7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QUrl("http%3A%2F%2Fexample.com") has only a path of
"http%3A%2F%2Fexample.com". In Qt 5.0 and 5.1, the %3A would get decoded
to ':', which in turn makes the URL invalid (colon before first slash).
Found via discussion on the interest mailing list.
Change-Id: I7f4f242b330df280e635eb97cce123e742aa1b10
Reviewed-by: David Faure <david.faure@kdab.com>
Since QPlatformTheme covers all dialogs whereas QPlatformDialogHelper is
really only for the native dialogs then the SnapToDefaultButton hint is
moved as it has relevance for all dialogs
Task-number: QTBUG-32631
Change-Id: I1dce0bb4abcd4cfd39c4a199a33fc7078176ab4b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Don't use the 'emit' keyword in the moc generated code for properties
with MEMBER
Task-number: QTBUG-33094
Change-Id: I5a0950e9c7a0dee347a6a6c79098e3e7d4776014
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This may happen when we have namespaces and the qualified name is used
to scope an enum.
Task-number: QTBUG-32933
Change-Id: Ic4923bbfb138387bae1e3694172661ace8342089
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
moc's C++ is not 100% accurate, so better process the invalid macro with
a warning rather than an error.
Such errors occurred in the QSKIP macro with variadic arguments since
that macro is defined conditionally.
It is also causing problem in boost header (cf task QTBUG-29331)
Task-number: QTBUG-29331
Change-Id: Ice6a01b675286540d6470c8e36920b7efd39b540
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This fixes the wrong value for path() and fileName() when a
path or file name actually contains a '%'.
userInfo() and authority() are not individual getters, they combine
two or more fields, so full decoding isn't possible (e.g. username
containing a ':').
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery]QUrl now
defaults to decoded mode in the getters and setters for userName,
password, host, topLevelDomain, path and fileName. This means a '%'
in one of those fields is now returned (or set) as '%' rather than "%25".
In the unlikely case where the former behavior was expected, pass PrettyDecoded
to the getter and TolerantMode to the setter.
Change-Id: Iaeecbde9c269882e79f08b29ff8c661157c41743
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Forward-port of 9ce60ff509c4ff27fe861fc5b2080f50897a68c4 (Qt4Macros:
Allow specifying a TARGET in invokations of macros., 2013-02-26)
from cmake.git.
This causes the INCLUDE_DIRECTORIES and COMPILE_DEFINITIONS to be
used from the specified target when running moc.
Change-Id: I868a35ade3c6b059e64d226291cf2046709d86d4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is new in CMake 2.8.12 and replaces the old properties
matching IMPORTED_INTERFACE_LINK_LIBRARIES_<CONFIG>.
Change-Id: I5d4c454972f2535f6792e95718c73d80c56ac24c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
... supported on the new test server. Once the new server image is in
place, we can only allow for the new life time hint of 300 seconds.
Task-number: QTBUG-33040
Change-Id: Id6ad9983789cc6badf3fc2f6628bf79379988201
Reviewed-by: Richard J. Moore <rich@kde.org>
The unit tests were caching the original TZ value to restore later
after testing with different TZ values. The problem is reading TZ will
return a null value if no override TZ value is set, and if you then set
the TZ to null the system assumes UTC and not the system time zone.
Instead we need to unset TZ if it was null to start with.
Change-Id: Ib0625b1712e565f9fdfa99e2ffe1e5d74f059354
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
use the new parser flags to report all i/o errors directly.
as a notable side effect, the "WARNING" prefix is gone (even though
it is still treated like that, which is mildly insane to start with).
Change-Id: I084375d5e7a3314ae763795f7c318804a9fb84b6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This allows platforms to dynamically alter their keyboard
shortcuts, for example if they are user-configurable on that
platform. Current behavior remains the same.
QEvent previously used the hardcoded values in QKeySequencePrivate so
this was modified to use QKeySequence::keyBindings().
In order to keep the speed of QEvent's former binary search, we moved
this code to QPlatformTheme::keyBindings(), making it faster for all
keyBinding lookups.
As we now need to search by StandardKey instead of by shortcut the list
is reordered and a test is changed to reflect that.
Change-Id: Iefb402fbbe8768be2208ce036f3c2deed72dcc6c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Currently the default for QSplitter::opaqueResize is hard coded,
which is less than ideal. Instead this should be provided as a
style hint via QStyle so as to give a more uniform look to all
applications.
Change-Id: I5711811f7b672e36aafcd292ed320308570a0390
Reviewed-by: Kevin Ottens <kevin.ottens@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This tests crashes a lot lately.
Task-number: QTBUG-29684
Change-Id: I6892238dc071f050b0208dd5b4843629fa707347
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Created QTBUG-33067 for tracking the issue, after some debugging.
Change-Id: Iaf5556db2e0858e40a7cf6c9dbbe7e6fd6120bac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
