When we auto resize it is handy to be able to limit the maximum
size (just like the minimum size).
[ChangeLog][QtWidgets][QHeaderView]A maximumSize for sections
has been introduced. The maximum section size is by default
the largest possible section size which in Qt 5.2 has been
limited to 1048575 pixels.
Task-number: QTBUG-4346
Change-Id: Ida9cbcc11bd5c4498e319df2e6379c69a7033c04
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QCheckBox cycles through the 3 states, but item delegates didn't
do that.
Change-Id: Iad1e464341033ca357925fe8064f53bb584459f4
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
"Make QGuiApplication::exec() run within NSApplicationMain()"
"Make Qt process native and timer events on Cocoa applications"
"Cocoa: Fix QFontDialog, QColorDialog auto-tests"
This reverts commits
1e14762b8de4b2a0b4badf7944e7d7
Change-Id: I80b65b5ee0297b090f807bd420664233dfc44f7b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Before we went through non hidden indexes, but we never considered
the visual order. This patch fixes that issue.
Though it was wrong before, it probably never was a big problem
since it was unlikely that the tree (on logical index 0) was
swapped or hidden, but
658e42e77a
makes it more likely that problems with wrong focus could occur.
Change-Id: Ic7b6cd2df1f8638be1a7c9e6df27f428685869fc
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The new Cocoa event dispatcher made apparent some deficiencies in the
way the dialog helpers were being hidden. In particular, we would not stop
a dialog helper's modal loop when closing the dialog, resulting in the
auto-tests hanging. Also, since the QApplication event loop is runnig with
[NSApp run] in the stack, the previous workarounds are no longer needed.
Task-number: QTBUG-24321
Change-Id: Ifba713c286638d78a699c319a15683d09714f06f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
QButtonGroup emits signals on clicked, pressed and released for
buttons in the group, but for some (insuffienct) reason it did
not emit anything for toggle (the only signal that it didn't emit
anything for).
This patch changes that, by adding handling of that signal to
QButtonGroup.
Task-number: QTBUG-14857
Change-Id: I88bcd7b060b78c7ff05ea1adf7baaddfe6d463be
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Done with Jan Arve
Task-number: QTBUG-33104
Change-Id: I8319748536d448d1c37a26527ced53156d8c2f56
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
The documentation says that we scroll one pixel
Quote:
"QAbstractItemView::ScrollPerPixel (value 1)"
"The view will scroll the contents one pixel at a time."
However until now Qt has tried to be smarter than the
documentation, but is actually getting in the way of the user,
where a manual set value to setSingleStep will continuingly
be overwritten (on e.g resize).
This patch ensures the behavior described in the documentation
for the vertical headers - and leaves the control to the user.
[ChangeLog][QtWidgets][QAbstractItemView] QTBUG-7232 - In ItemViews
scrollbars will now by default only scroll 1 pixel when scrollMode
is set to scrollPerPixel. That is it will (when scrollMode is
scrollPerPixel) do what is stated in the documentation, and no
longer automatically adjust the scrollbars singleStep. The user
can now control that value.
Task-number: QTBUG-7232
Change-Id: I8a61d3100be65d0c4ee32aad58caed019aa2669c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Since QPlatformTheme covers all dialogs whereas QPlatformDialogHelper is
really only for the native dialogs then the SnapToDefaultButton hint is
moved as it has relevance for all dialogs
Task-number: QTBUG-32631
Change-Id: I1dce0bb4abcd4cfd39c4a199a33fc7078176ab4b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Currently the default for QSplitter::opaqueResize is hard coded,
which is less than ideal. Instead this should be provided as a
style hint via QStyle so as to give a more uniform look to all
applications.
Change-Id: I5711811f7b672e36aafcd292ed320308570a0390
Reviewed-by: Kevin Ottens <kevin.ottens@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This tests crashes a lot lately.
Task-number: QTBUG-29684
Change-Id: I6892238dc071f050b0208dd5b4843629fa707347
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Created QTBUG-33067 for tracking the issue, after some debugging.
Change-Id: Iaf5556db2e0858e40a7cf6c9dbbe7e6fd6120bac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Though the worst case memory usage was improved in
b800d8b94a the best case usage changed.
Since best case is the same as worst case in Qt5, we should
use as little as possible, which this patch ensures.
We reduce the memory usage from 3 to 2 ints per section - which is
half of worst case in Qt4. There seems to be no bigger cost in
performance doing that. The recalcSectionStartPos is still very fast.
This patch limits the maximum section size to (2^20) ~ 1.000.000 pixels.
This alleviates
Task-number: QTBUG-32325
Change-Id: I9b7530030a31b4e35cf1ca9e32c6b936f5ea9790
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Sections may be hidden => QStyleOptionHeader::position must reflect the
state seen on the screen. Otherwise styles will give wrong visual
results.
Task-number: QTBUG-32203
Change-Id: I7ef86496be092bf6f52ec45f757b501f38c3a431
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
In this patch we introduce tabBarClicked and tabBarDoubleClicked to get
a finer grained information on the user interaction with the tab bar.
Done-with: kevin.ottens@kdab.com
Change-Id: I7be76a556ca09186e98f2e076fe2512d6c5e6773
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Based on addAction-API.
Change-Id: Ie6c3d2d728b23a85cdd80428c92ee8208ae0a65c
Done-with: Kevin.Ottens@kdab.com
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
When falling back to the completion prefix, make sure to also pass an
invalid index to activated().
Change-Id: I6b282a01c95492466890632b77837bcc96eb038a
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This test has recently timed out a few times on OS X test runs, with
no relevant changes to account for the timeout.
Task-number: QTBUG-27890
Change-Id: Ia24f7812ed2a0b3eac51847a7dacbc9f225b48b8
Reviewed-by: Simo Fält <simo.falt@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Add QLineEdit::addAction() overloads,
allowing for a variable number of icons or user-defined
widgets.
Change-Id: Id298f18c2f47cc998170357e65cc6098df851aab
Done-with: Kevin.Ottens@kdab.com
Reviewed-by: Thomas Zander <zander@kde.org>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Previously, the topmost untransformable's scene transform, which
includes the item's position and local transformation, was used to
determine the item's anchoring position. This position was then
passed on to be multiplied by the item's transform again. This
works fine for toplevel untransformable items that don't have any
transform set at all, but those who do would have their transforms
applied twice - one to determine the anchoring position, and again
to transform the item itself. Since only translation transformations
can affect the first operation (the anchoring pos), this bug only
applies to items that set ItemIgnoresTransformations and use a
local transform that includes translation.
Task-number: QTBUG-21618
Change-Id: I772d52d59dfd9f242d0140632a87e9c68dfe0ea1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
By not assuming that we have the '/Developer' directory at the root
of the file system. 'Users' is less likely to be removed/deprecated.
Change-Id: I659bdb67cfb1ed2f73bc643ba4afe1f1f89d5bc5
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Tests are passing nowaways on OS X.
Task-number: QTBUG-27890
Change-Id: I6a0a881ece844ef931cb8af51b58d33c40be4d2c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Added full path to src dir for testdata.
Task-number: QTBUG-32535
Change-Id: I38e96216e9a016869151adf0ae995e068b8b5354
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Added full path to src dir for testdata.
Task-number: QTBUG-32536
Change-Id: I5ef215d451a6407c277d2c98f21ffc35a8657e28
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
edited() signal should not be emitted when QValidator fixups
text in a lineedit.
Change-Id: Iccef45c4b858a65fd5097dc9e5033cefb09ad889
Reviewed-by: David Faure <david.faure@kdab.com>
Currently, calling
QGraphicsScene::items(QPointF(0, 0), Qt::IntersectsItemBoundingRect) or
QGraphicsScene::items(QPointF(0, 0), Qt::ContainsItemBoundingRect)
will exclude items whose shape does not contain QPointF(0, 0). This is
because QGraphicsSceneIndexPointIntersector::intersect() also checks if
the point is contained within the shape, instead of just checking
if it is contained within the bounding rect.
Task-number: QTBUG-19036
Change-Id: Ie701af2a5694d40cf9b3c9c19adbb09a53a4e398
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Sometimes it is nice that hiding a widget does not affect the
layout. This patch makes that possible by allowing hidden
widgets to take up space.
Change-Id: Ifbc1cdee0e112950acc025919b98199ea9558db7
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Instantiate widgets on the stack to ensure they are destroyed
when the QApplication instance goes out of scope.
Introduce waitForWindowExposed() to make sure events are in sync.
Task-number: QTBUG-32125
Change-Id: Ia54e2fa9a7c2e279353c4514a6735e326edf35ae
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Unactivating a window is not really supported, nor has it ever really
been, so activate another window instead. This incidentally
also makes the test work cross platform.
Change-Id: I6e593e9b7972dd5c5038c8d18a42be90bf19248c
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
The test currently leaks 2 directories QFileDialogTestDir,
QFileDialogTestDir4SelectFiles in /tmp.
Change-Id: I396f0b069572a680d81206dd0f1ddf606cbbe9e4
Reviewed-by: David Faure (KDE) <faure@kde.org>
