CMake 3.19 removed the restrictions on allowable names for properties
on INTERFACE targets. With earlier CMake versions (back to CMake 3.11),
names for custom properties must begin with either a lowercase letter
or an underscore.
In 5807e1ae81 (Add plugins to Qt tools and executables for static
builds, 2021-03-19), the names QT_REPO_PLUGIN_CLASS_NAMES and
QT_REPO_PLUGINS were used, but in some cases, the targets on which they
were being set are INTERFACE targets. Replace these with names that
are supported with CMake 3.11 or later.
Amends 5807e1ae81
Task-number: QTBUG-91915
Pick-to: 6.1
Change-Id: Ife702a1fb339b190d46a8dafb380253219199ba6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In the recent refactoring of qt_internal_add_plugin, a new target
existence check was added when associating a plugin with a qt module.
That check didn't account for a qualified qt module target name.
This failed configuration of qtsvg which checked for the existence of
a namespace-less 'Gui' in a per-repo build.
Make sure to prepend the Qt namespace to the qt module name and also
handle aliased target names.
As a drive-by, add a TODO item to figure out how to link executables
to plugins who's plugin type belong to a different repo, but both the
executable and plugin are built in the current repo.
Amends aa4a1006cb
Fixes: QTBUG-92235
Change-Id: I1c0f83672ab00f4702be9bad9a66ccc35e82f5c8
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
(cherry picked from commit 734d2cdbc4ff6db6b3df8fffbb23dbbb565c076b)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
If SKIP_INSTALL option is specified for the qt_internal_add_plugin
function the install_directory variable become empty and finalizer unable
to call qt_finalize_plugin, because of lack of the second argument. It
makes sense to use the INSTALL_PATH single argument instead.
Change-Id: I2d4b40c8cf812a834c0e045569b45a649d339508
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Remove code duplication by calling qt6_add_plugin() from
qt_internal_add_plugin().
Separate out the public and internal arguments for the
variables defined in QtBuild.cmake for these functions.
Provide them via commands instead for greater robustness.
This separation allows other Qt repos to access the appropriate
set of keywords where they define commands that forward
on to *_add_plugin() in their implementations. Retain
the old variables for now to simplify the integration
steps for updating other repos. The old variables can
be removed once there are no more references left to
them in any repo.
Task-number: QTBUG-88763
Pick-to: 6.1
Change-Id: I0105523afd95995923bd20fc963d245bbb15d34d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In static builds, we cannot allow any part of the main build to make a
call to find_package(Qt6...) where such a call may load a
Qt6*Plugins.cmake file. That would add additional dependencies to the
main module targets, setting up a circular dependency in the set of
*Config.cmake files which cannot be resolved. This scenario would be
triggered by per-repo builds or user projects.
But Qt's tools and other executables still need to load some plugins
in static builds. Sometimes a platform plugin may be enough, other
times we may want all supportable plugins (e.g. Qt Designer).
Therefore, add all plugins we can identify as relevant for an
executable that is part of the Qt build, but add them directly to the
executable without affecting the linking relationships between the
main module libraries.
Also remove the now unnecessary check for QT_BUILD_PROJECT_NAME in
top level builds because there should be no difference between per-repo
and top level builds any more (as far as linking static plugins is
concerned).
Examples that build as part of the main build will still build
successfully after this change, but they will not run if they require
a platform plugin. Examples need to be moved out to a separate build
where they can call find_package(Qt6) without QT_NO_CREATE_TARGETS
set to TRUE to be runnable (see QTBUG-90820).
Fixes: QTBUG-91915
Pick-to: 6.1
Change-Id: I8088baddb54e394ca111b103313596d6743570ba
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
For each plugin, we create a custom target with it's OUTPUT_NAME such
that one simply can do 'ninja qtuiotouchplugin' to build it.
QTuiTouchPlugin has qtuiotouchplugin as OUTPUT_NAME, which is
problematic with Makefile generators on case-insensitive file systems.
See CMake upstream issue #21915 for details.
Work around this issue by not creating the custom target in this
situation.
Pick-to: 6.1
Fixes: QTBUG-84342
Change-Id: Id9a6cf0a01c179d5c93da4146e393cf00153ac4f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Associated changes in the qtdeclarative repo now ensure that arguments
for qml plugins are handled on the calling side. This reduces the
qml-specific logic needed in qtbase and gives qtdeclarative clearer
control over qml build and install locations.
As part of that work, the INSTALL_LOCATION keyword used in
qt_internal_record_rcc_object_files() has been renamed to
INSTALL_DIRECTORY to make it consistent with the keyword used for the
same concept in other commands.
Pick-to: 6.1
Change-Id: Iebd319899f63d79fbe15ce965b84ce324c28a508
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Contrary to its name, this command was also setting a target property.
Since it was only called in one place and that caller can just as
easily set the property instead, rename the command to make clear its
internal nature and refactor it so that the caller is responsible for
setting that property instead.
Also make it an error rather than just a warning if the command is used
for a target that doesn't belong to any module. Since this is now
unambiguously an internal command, we should always expect the target
to belong to a module.
Pick-to: 6.1
Change-Id: I929a652ddd482653868fc9df887f38f4bc7f35d9
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The pro2cmake.py conversion script faithfully reproduced the .pro files
for the plugins, which specified the libraries as public. But in CMake,
the implications of this are that public usage requirements should then
be propagated to consumers. We don't expect any consumers, since a
plugin is created as a MODULE library in CMake, so for Windows we don't
even have an import library to link with. The only exception to this is
for static builds where plugins are created as STATIC libraries
instead, but only in certain controlled situations do we then link to
plugins. Even then, usage requirements are not expected to propagate to
the consumers, so these relationships should always be specified as
private.
This change warns on any PUBLIC usage requirements specified for a
plugin. This check is disabled by default to avoid spamming CI builds
for repos that haven't been fixed yet. The check can be enabled by a
CMake cache option, which is intended for developers to use locally
when fixing this issue in other repos (all plugins in qtbase should
not trigger this warning as a result of changes in this commit).
Task-number: QTBUG-90819
Pick-to: 6.1
Change-Id: I09f2c8da77db1193ad3370f85d367dfc6ab7b9a6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add internal function to cleanup compiler flags out of the
CMAKE_xxx_FLAGS_xxx variables. Use introduced interface to clear
the '/EHsc' flag for the MSVC compiler family. This adjusts the
CMake behavior to the qmake one.
Change the 'EXCEPTIONS' option handling in helper functions. Add
ability to add enabling and disabling exception flags. Previously
it was only possible to add disabling exception flags.
Fixes: QTBUG-89952
Change-Id: I60d47660a97ae9b5a1d1f4107d352c9e97890144
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
There is no point in generating cpp files containing Q_IMPORT_PLUGIN()
macro calls for non-executable targets like modules, plugins and object
libraries in a static Qt build.
It causes unnecessary compiling of 10+ files for each of those targets.
In a static Qt build, plugin imports should only be done for executables,
tools and applications.
Pick-to: 6.0
Change-Id: Ied90ef2f6d77a61a093d393cfdf94c400284c4f0
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When a CMake release introduces a new policy that affects most Qt
modules, it may be appropriate to make each module aware of that newer
CMake version and use the NEW policy without raising the minimum CMake
version requirement. To reduce the churn associated with making that
change across all Qt modules individually, this change allows it to be
updated in a central place (qtbase), but in a way that allows a Qt
module to override it in its own .cmake.conf file if required (e.g. to
address the issues identified by policy warnings at a later time). The
policies are modified at the start of the call to
qt_build_repo_begin().
For commands defined by the qtbase module, qtbase needs to be in
control of the policy settings at the point where those commands are
defined. The above mechanism should not affect the policy settings for
these commands, so the various *Config.cmake.in files must not specify
policy ranges in a way that a Qt module's .cmake.conf file could
influence.
Starting with CMake 3.12, policies can be specified as a version range
with the cmake_minimum_required() and cmake_policy() commands. All
policies introduced in CMake versions up to the upper limit of that
range will be set to NEW. The actual version of CMake being used only
has to be at least the lower limit of the specified version range.
This change uses cmake_minimum_required() rather than cmake_policy()
due to the latter not halting further processing upon failure.
See the following:
https://gitlab.kitware.com/cmake/cmake/-/issues/21557
Task-number: QTBUG-88700
Pick-to: 6.0
Change-Id: I0a1f2611dd629f847a18186394f500d7f52753bc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Plugins will no longer get .pri files generated in non-static builds.
Header modules are now marked in the .pri files as CONFIG += no_link.
Pick-to: 6.0 6.0.0
Fixes: QTBUG-88221
Change-Id: I06e31fa970ad021261c43ca3acd88055cc4c9555
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Modify pro2cmake converter to add extra argument to
qt_internal_add_plugin. DEFINE_IF FALSE is added to generic plugins
those had "PLUGIN_EXTENDS = - " specified in .pro files.
Fixes: QTBUG-87861
Change-Id: I9269df19a32a088f5261f50e7ffff6d29c3d605f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Tools and library DLLs already have version information embedded.
Add the missing _qt_internal_generate_win32_rc_file call for plugins.
Fixes: QTBUG-87747
Change-Id: I619948f4066ce229d41e8b93f125751e1d28e26c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Now all shared libraries and executables will get .debug files on
the platforms that support FEATURE_separate_debug_info
With the directory property _qt_skip_separate_debug_info certain
targets can retain the debug symbols in the binary e.g. lupdate with
MinGW 8.1.0 will cause objcopy / strip to fail.
Fixes: QTBUG-87015
Change-Id: I03b106e68ef0a42011d1ba641e6f686b2e7b7fb4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The QT.<module>.DEFINES assignment in pri files needs to take into
account the module name when computing the define name. This is the
MODULE value that qmake specifies.
In CMake that would be the value of CONFIG_MODULE_NAME.
Previously the value of the define was computed in
qt_internal_module_info() without taking into account the module name.
While qt_internal_module_info() ended being used also for plugins and
other target types, the defines computed by it were meant to be used
only for Qt modules.
Thus remove the <result>_define assignment from
qt_internal_module_info and move its computation directly into
qt_internal_add_module, taking into account the value of
CONFIG_MODULE_NAME.
The only other use of module_define was in qt_internal_add_plugin but
that was merely a long overdue copy-paste error, qmake doesn't
propagate QT_FOO_LIB defines for plugins.
As result, a define special case in testlib is not needed anymore,
because the define is now computed properly.
Finally, QT_FOO_LIB should not be used while building the Qt module
itself, so instead of using PUBLIC_DEFINES option of
qt_internal_extend_target, use target_compile_definitions(INTERFACE)
directly.
Change-Id: I4d44f7461bac2f0c09aec3e995d02dfe36e00883
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
With the introduction of the new 'default_qpa_plugins' custom target,
a target dependency cycle occurred in qtwayland:
qtwaylandscanner -> default_qpa_plugins -> a wayland qpa plugin ->
WaylandClient -> qtwaylandscanner
The issue is twofold:
- default_qpa_plugins accidentally depended on non-qpa plugins.
- All qpa plugins were enabled by default, including the wayland ones.
Fix the default_qpa_plugins target not to depend on regular non-qpa
plugins.
Also fix qpa plugins not to be enabled by default, but instead only
choose one qpa plugin to be the default (via evaluating the
DEFAULT_IF) condition.
Amends df9c7456d1
Change-Id: I22cd2c72f6b75be54263fd21097258bd179e3616
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Instead of propagating the deprecation wranings, we compiled all code
with -Ddeprecations.
Change-Id: I0233ddc85bdbdcb93d366073b2cea5d47bdbe52a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Add 3 new convenience custom targets:
'qt_plugins', 'qpa_plugins' and 'qpa_default_plugins'.
Additionally, if we detect that an internal executable / test
links against Gui, add a dependency on the 'qpa_default_plugins'
custom target, so that if a developer configures Qt for the first time
and then calls ninja 'tst_foo_check', we ensure the test will launch
successfully because the default QPA plugin will also be built.
Change-Id: If6dd70844b5effdf8a293f65f8785855cc85b132
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Supports installing linker generated debug info for shared libraries
and executables, as well as compiler generated debug info for static
libraries.
Works with Ninja Multi-Config as well, with the caveat that the files
are installed optionally, aka the install rule will not error out if
a pdb file is not present. This is necessary, because it's not
possible to create per-config install rules properly.
Fixes: QTBUG-87006
Change-Id: I95e91a6557eb0ee0f882103be54cd38795c349f7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Building a user project in Release configuration against a Qt built with
CMAKE_CONFIGURATION_TYPES=RelWithDebInfo;Debug led to the user project
being linked against the Debug Qt libraries. This is especially painful
with MSVC where debug and release runtimes are incompatible.
We now create *AdditionalTargetInfo.cmake files along the
exported *Targets.cmake files that set the IMPORT_*_<CONFIG> properties
to the values of the release config Qt was built with.
User projects built with an unknown
configuration (CMAKE_BUILD_TYPE=ArbitraryName) will link against a
release Qt. This can be controlled by setting the variable
QT_DEFAULT_IMPORT_CONFIGURATION to, for example, DEBUG in the user
project.
Fixes: QTBUG-86743
Change-Id: I12c4b065a9845c7317f6acddab46b649f2732c9e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Rename all libQt6*.so to libQt6*<infix>.so
Task-number: QTBUG-85438
Change-Id: I4b91ffaaec7bea61454b0d3c794c77f2d0868d54
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Offer compatibility wrapper functions until we update all of the Qt
repos to use the new names.
Task-number: QTBUG-86815
Change-Id: I5826a4116f52a8509db32601ef7c200f9bd331de
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
QtBuild.cmake is huge. Split it.
Move module, plugin, tools, executables and test related functions out
of QtBuild.cmake into separate files.
Do the same for many other things too.
An additional requirement is that all the new Helpers files only
define functions and macros.
No global variable definitions are allowed, nor execution of commands
with side effects.
Some notes:
qt_install_qml_files is removed because it's dead code.
Some functions still need to be figured out, because they are
interspersed and depend on various global state assignments.
Task-number: QTBUG-86035
Change-Id: I21d79ff02eef923c202eb1000422888727cb0e2c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
