Task-number: QTBUG-109779
Pick-to: 6.5
Change-Id: I21ecd4910ba3d699e44d9ea922093e98e0b8a335
Reviewed-by: Inho Lee <inho.lee@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Fixes compiler warnings about narrowing conversions.
Found by compiling with clang and -Wshorten-64-to-32.
Drive-by changes:
- use range-for instead of an iterator based loop
- use strlen("*.") instead of magic number 2
Pick-to: 6.5
Task-number: QTBUG-102461
Change-Id: I0bf2299049c0411ed496468238ca30b69946ffc2
Reviewed-by: David Faure <david.faure@kdab.com>
Similar to TableScope - create a helper class to make sure the
procedures are cleaned up on exit so they don't affect the result during
the next test run.
Change-Id: Ic5b02ca63e03f330392797ed22313767557fc548
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Equivalent to the test added to the QWidget test case, but since QtWidgets
code contains logic to both synthesize and compress/filter enter/leave
events, we can only verify that the QWindow does get the events.
The test is very flaky on Windows, so blacklisting it right away.
Change-Id: Ic1da9439f60f619a76a3653a23fef8e9ebc0e75d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The classification of local time as ahead of UTC, behind it or equal
to it gets complicated by zones near the prime meridian - some of
which have varied which side of it they nominally are - or the
international date line, which a few zones have crossed.
So, instead of having one classifying variable, split to having three,
one for the distant past (when using local solar mean time), one for
the epoch and one for the distant future.
Change-Id: I7c0da376e1625372086dc51afa815756f0bde442
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes it possible, on a system with /usr/{lib,share}/zoneinfo/,
to systematically run a command with TZ set to each system-supported
zone. For example, it can be used to verify that a corelib/time/ test
passes regardless of the valid setting of TZ.
Change-Id: I6ea9a64d8bcb745aea80ab9ae431602d3e3265a1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The stepIntoDSTGap() hour cases were already conditioned on hour > 0,
explain why. The month and year tests need similar checks for kindred
reasons; add and document those checks.
Pick-to: 6.5
Change-Id: Ibcb69449fcd572ee94306a805fd680e9b5155322
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The zone had a transition at the start of 1900, so QDTP's default date
ends up being 1900-01-01 at 00:02:20 instead of at 00:00:00; and any
parsing of date-time strings that doesn't set the minutes and seconds
consequently ends up "wrong" (about a field that wasn't specified).
Change-Id: If4b9864616fa08bc023a6974dae255f96ca90f83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The zone had a transition at the start of 1900, used as default date
by the parser. This leads to the default minutes and seconds being 2
and 20, rather than 0. Since this test is parsing a date-only string,
only check the date of the result, to avoid failing in Cocos.
Pick-to: 6.5
Change-Id: Ifb307eadb747097988bcf0afc6f307835ff2c8ec
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
America/Sao_Paulo was not alone in starting 2008-10-19 with a spring
forward. Include the other affected zones in the check to tune the
expected start-of-day time. See [0] for details.
[0] https://github.com/eggert/tz/blob/main/southamerica
Pick-to: 6.5
Change-Id: If251d8b715090319441790696983273637765d2e
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some QDateTime tests get tripped up by a transition at the epoch in
Baja Mexico. For the operator_eq() and time-difference test, simply
using startOfDay() instead of QTime(0, 0) - which was skipped - solves
the problem. For addDays() and fromStringDateFormat(), skip the
affected tests.
Change-Id: I3620f0d1e4b05d9f799662eea96a40c8284de331
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The zones in Baja Mexico had a transition at the epoch.
Change-Id: Ic70e23bcc980bf371e925fcb8fb83ca5ef000c9f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Given that QDTE only supports local time and UTC, using Europe/Oslo as
zone was disconnected from reality, especially as various QDateTime()s
were constructed using local time. Use the system zone.
Pick-to: 6.5 6.2
Change-Id: I95b3a6a6acf9ffc2b8c7f05d3dd9440ff173abfe
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test wants to start shortly after the transition, then step an
hour backwards, into it, to check we land safely on the other side.
However, it assumed the gap witdh was an hour, which is not reliable.
Use the gapWidth already used in computing springGap instead.
The -3590 seconds in the result time is correct, as it's the ten extra
seconds we started beyond the gap, minus the hour we step backwards.
Pick-to: 6.5
Change-Id: I4399af7e54a60bd55ea51d054d3cd2ecfcb0e354
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The "{forward,back} to %s, correct to nearest" tests were reporting
the time of the transition as %s but, like the jump test, were using
the middle of the gap as the time to set. So compute that mid-time's
string once and use it in all three test names. Also renamed some
local variables to accommodate the new one for this text.
Pick-to: 6.5
Change-Id: Ic6c40c470fc74ae8bcfc0dc9d1596af06318a883
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Although the zone's daylight time offset is usually the width of the
gap, it's possible the transition is (or includes) a change to
standard time; so determine the actual gap width by comparing the
difference between time a day earlier and later to the usual duration
of two days. Also skip the test if the transition isn't really a gap.
Pick-to: 6.5
Change-Id: I56e381c9f74cfa1806d43b3ed5e4637436ebdf57
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The function is passed a zone to work in, so setting the transition to
local time made no sense; set to the given zone's time, instead.
Pick-to: 6.5
Change-Id: Icaa0955fe5fcd5bc257322afcb7e25e932dedd1b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
We check three sample dates, in different years, so don't compare
their year() to 1970, but to their respective actual years. In the
process, package the arrays iterated for these checks into a constexpr
struct array and reverse them so that, instead of reverse-iterating
and indexing, we can use a ranged-for loop.
Change-Id: I214685346c637875a4ea31125c324851eb4308db
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The name final is suboptimal, given that it's also a keyword.
Rename initial at the same time.
The local-time parts of the test are apt to fail if local time
coincides with the zone being tested, as previously noted. Document
known cases of such coincidences, to help someone studying a failure
to know why it happened.
Change-Id: I1f1f302f161373a154066df210e03725b9a5f9ed
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the test failed, it did so in triplicate.
Pick-to: 6.5
Change-Id: Ia871aed0a5960120a2659a6778c10dccd4b2953a
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In case FEATURE_timezone=OFF auto-tests should still be built successfully
Change-Id: I0226a7d7781a412bf9e9935c2cf1a48b1ce427b5
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Noticed the warnings when building the manual tests.
Pick-to: 6.5
Change-Id: I7f927f42f11d234ec3c980f36d8e12c0c49be712
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It's unlikely we will ever use pro2cmake at this project stage,
so it doesn't make any sense to keep the 'special case' markers
in the CMake scripts. Remove them and replace with TODO where
needed.
Change-Id: I84290c20679dabbfdec3c5937ce0428fecb3e5a7
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We sometimes use Objective-C++ code in files with a .cpp extension,
to avoid the churn of adding a foo_mac.mm file. Instead of manually
telling the compiler to build these files in Objective-C++ mode, we
use CMake's intended mechanism, which means genex constructs such as
$<$<COMPILE_LANGUAGE:OBJCXX> will work for these files as well.
Pick-to: 6.5 6.2
Change-Id: If295c3f34f6bee9f4d9f877f519c9c7770665fee
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When the DPI of a window changes due to being moved to another screen,
or the current screen reconfiguring, the mask we've set earlier is no
longer correct, as the mask was set based on the original screen's
scale factor and in relation to the former platform geometry of the
window, which now has changed.
Like the geometry of a QWindow, the mask is expressed by the user in
the QtGui coordinate system, so it's the platform's job to transform
this into the platform coordinate system and update it when needed.
Add a manual test that users a QWidget and a Q(Raster)Window side by
side.
There's still an issue with the screen change being triggered to
early, via QWindow::setGeometry, instead of when the window has
actually moved to the new screen, resulting in the paint event
flushing to a window and backingstore that is in the wrong state,
but this requires further research to fix.
Task-number: QTBUG-97642
Pick-to: 6.5 6.2
Done-with: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I7ab2d267fbaf6ac32b507d05a418eb025b354a0b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
And implement the rvalue overload of addResult() using it.
[ChangeLog][QtCore][QPromise] Added emplaceResult() and
emplaceResultAt() member functions.
Fixes: QTBUG-112270
Change-Id: Id369542215a60c0818f1afa8d564498be84732e8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test implicitly relies on window activation as QWidget only emits
accessibility events for focus changes in the active window. So skip it
on platforms that don't support WindowActivation and remove it from
the blacklist.
Fixes: QTBUG-109763
Pick-to: 6.5
Change-Id: I67d9a95f4f36b5271fe53ae90140a28770566c83
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QMenu::exec opens a blocking loop, which is problematic for webassembly.
Replace with QMenu::popup, and reset the down-state of the button when
the menu is about to hide. QMenu emits aboutToHide immediately before
existing the event loop in the hideEvent override, so the timing is the
same.
Change-Id: Iccb418d10fcb25f6ad1f73f9cdce6ea6581bd73b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The "two widgets at a time" API to set the tab order is awkward and
easily misused (as the documentation explicitly explains). Add an inline
overload that takes an initializer_list, and call the existing function
for each consecutive pair of widgets in the list.
Add documentation with snippet, and a test.
Change-Id: I8e6f14a242866e3ee7cfb8ecade4697d6bdfb4d4
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QDateTime::addMsecs does check for overflow. I don't know when this
has changed, but it doesn't matter.
Change-Id: I44c6ba5e88cce544c0d1ef33fa38a528a96b0b7e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only unzip the test suite in initTestCase(), but run the tests from
runTestSuite(). This is mainly useful when running specific a unittest
locally, no need to wait for the whole zipped test suite to run.
Change-Id: I518a2de716d3d07fb5a78298f1bd3ab2759e744b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use TableScope helper class to make sure the table used for the test is
really cleaned up before usage.
Change-Id: I45fffcd13acae6032636ae07097b14af174ede21
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Sync the IBASE driver behavior for primaryIndex() and record() with the
rest by assuming that the given table name has the correct casing.
Change the tests for these two function to pass an unescaped table name.
Change-Id: I6d96359f97e1acc6970b9a22fdf0e968a616b7bc
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
[ChangeLog][SQL][SqlQuery] Added two new functions
boundValueName()/boundValueNames() to return the names of the bound
values.
Fixes: QTBUG-97847
Change-Id: I8df5f15e8df13141a34d38b0a2e13b37f4e7829c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We can expand the testing a bit bit verifying that also
created windows work as expected, and that QWindow DPR
is updated when Screen DPI is changed.
Change-Id: I082aac18b6b086c69c16681977b7eaa6c3e54ee0
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
The alias created by QSqlRelationTableModel to avoid duplicated field
names was not escaped which lead to an inconsistency in the returned
alias name from the database (e.g. postgres lowers all unescaped column
names).
Also adjust the test for QSqlRelationTableModel to use escaped table
names for it's tests and fix it for QIBASE.
Change-Id: I01426320c0c1a70cb9bf8e6dfa2f8b07dbb1c06b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When a context object is provided, then callers expect that the functor
or slot is executed in the thread of the context object. And if the
context object has been destroyed by the time the permission response
is received, the functor shouldn't be called at all.
To implement this, we either have to plumb the call back through a
signal/slot connection and benefit from QObject's infrastructure. This
is not practical here, as we don't have an "engine QObject" that would
emit a signal.
Instead, we can create a QMetaCallEvent explicitly, following what we do
in e.g. QHostInfo, and using a temporary QObject that handles the event
to then call the functor.
Add test coverage.
Pick-to: 6.5
Change-Id: Id878e45b304857304165ab4a7c6aae76fbee46ce
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
[ChangeLog][Deprecation Notice][QtCore] The QtFuture::makeReadyFuture()
method and all its specializations are deprecated since Qt 6.10.
The reason for the deprecation is that the method has a
makeReadyFuture(const QList<T> &) overload, which behaves differently
from all other overloads (including other non-const ref QList
overloads).
Use QtFuture::makeReadyVoidFuture() when you need a ready void QFuture,
or QtFuture::makeReadyValueFuture() when you need to propagate the
input type to the returned QFuture, or QtFuture::makeReadyRangeFuture()
when you need to create a multi-value future based on an input
container.
Fixes: QTBUG-109677
Change-Id: I55125269989df0a02840d5ddd5763ef5f1070df5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
[ChangeLog][QtCore][QFuture] Added QtFuture::makeReadyVoidFuture()
and QtFuture::makeReadyValueFuture().
Basically, these methods behave like QtFuture::makeReadyFuture(), but
QtFuture::makeReadyValueFuture() does not have a "const QList<T> &"
specialization returning QFuture<T> instead of QFuture<QList<T>>,
which allows it to always behave consistently.
This patch also introduces usage of the new methods around qtbase.
Task-number: QTBUG-109677
Change-Id: I89df8b26d82c192baad69efb5df517a8b182995f
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
[ChangeLog][QtCore][QFuture] Introduce
QtFuture::makeReadyRangeFuture(). This method takes a container
which has input iterators and returns a multi-value
QFuture<ValueType>, where ValueType is the underlying type of
the input container.
This commit also replaces the usage of buggy
QtFuture::makeReadyFuture(const QList<T> &) overload with the new
method.
Task-number: QTBUG-109677
Change-Id: I019e62eac74c643d88a65b3cc0085bc7c33bc712
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This can happen if the same project has two or more Q_IMPORT_PLUGIN
macros in their source. And that can happen when converting from qmake-
based builds to CMake, as qmake didn't generate a source file with the
macro but CMake does.
[ChangeLog][QtCore][QPluginLoader] staticInstances() will not call
duplicated registrations of the same instantiation function, which can
only happen as a result of duplicated Q_IMPORT_PLUGIN for the same
plugin name.
Fixes: QTBUG-102745
Pick-to: 6.2 6.5
Change-Id: Idd5e1bb52be047d7b4fffffd174fb9dd62d8583d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The benchmarks were only copied from the tests without a proper cleanup
- therefore clean them up now.
Change-Id: I0285de3fd2b67c21e732d7f3f9d1f4937965be81
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QMultiHash has access to two sizes: one of them is shared with QHash,
stored in QHashPrivate::Data::size, which counts keys; the other, which
is what our public size() function returns, is stored in
QMultiHash::m_size and counts plain (key,value) entries. We forgot to
update it in the non-const operator[] that created a node.
I've reviewed the rest of the code and can't find any more places where
the item count may be changed and m_size isn't updated.
[ChangeLog][QtCore][QMultiHash] Fixed a bug that caused an element that
was created by operator[] to not be counted, resulting in a hash map
with an incorrect element count and which could cause an assertion
failure depending on how the hash was later mutated.
Fixes: QTBUG-112534
Pick-to: 6.2 6.4 6.5
Change-Id: Idd5e1bb52be047d7b4fffffd17527ec274e1d99e
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
The overhead of making new custom classes appears to be less than
constructing a generic std::function.
[ChangeLog][QtCore][QRunnable] QRunnable::create can now take
non-copyable functions as argument.
Task-number: QTBUG-112302
Change-Id: Ied870f13ca6c7eaa14ed6eff9c4e676c7b73881c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Add a testcase for toSQLTCHAR() to make sure to pass the correct number
of encoded characters to the odbc functions.
Pick-to: 6.5
Task-number: QTBUG-112375
Change-Id: Ib67fab678fc3d0b098aedfc6fa9ec2139f2e75c7
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
A QSqlError is not equal when the native error code differs. The
database and driver text should not be considered during the
comparison because they might differ due to e.g. different locales.
[ChangeLog][QtSql][QSqlError] The comparison operators have been fixed to
take both error type and error code into account.
Change-Id: Ie7511f183f88dd454eb165c6ff237e51b79d1c08
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
One each of L1 and non-L1.
Will help porting that API to QAnyStringView.
Pick-to: 6.5
Change-Id: I51afc07c5b2384409c2627164e95265265fbb544
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the trailing frame just had PRIORITY we would early-return, though
this meant we didn't check if the frame had the END_STREAM flag set,
leading some requests to certain servers to hang.
Fixes: QTBUG-111417
Pick-to: 6.5 6.4 6.2
Change-Id: Iac174dc5aeca30d5d19fae35f303983de9841847
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Instead of adding more QString::fromMyFavoriteStringImpl(), just check
that
QStringView{myFavoriteStringImpl}.toString()
works.
It does.
Pick-to: 6.5
Task-number: QTBUG-111886
Change-Id: I337282611360b4a56a10c8acfd2d7d53ea196d5b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Add the move ctor and move operator for QSqlIndex, also add an explicit
testcase for QSqlIndex
Task-number: QTBUG-109938
Change-Id: I46cc6a24c2e7d5b23d2ac3427cafd01b9ba257ed
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This will be helpful in a number of places, in particular in order to
support enums of different sizes in QML. We record the type as string in
the JSON output and as QMetaTypeInterface in the generated C++.
Task-number: QTBUG-112180
Change-Id: I943fac67f8b25b013d3860301416cdd293c0c69e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
An implementation of C++20 std::to_address, a prerequesite for
QSpan<>.
The test cases are inspired by libstdc++'s test suite, just to avoid
missing some cases, but the to_address implementation is white-room.
Fixes: QTBUG-108430
Change-Id: I4c092fdd7a56c0b279068e341bbf91a725ca3b1f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QListView generates a move, when an item is dropped directly behind
itself. This causes unexpected behavior, e.g. item widgets getting
discarded.
This patch prevents a move from being generated in that case.
It adds an autotest to tst_QWidget, to verify item widgets and item
data do not get discarded in case of a no-op drag&drop.
Fixes: QTBUG-100128
Pick-to: 6.5 6.2
Change-Id: I02a755320a7b71dad218293c9c94c88da6507423
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
While doubleFunction's body is empty, it takes its argument by value,
which means copying. Copying an uninitialized double is a gray zone
(if you follow the partially-formed paradigma, it's UB; though the std
may allow it some types, most notably std::byte and uchar; probably
not double, though). Converting an uninitialized int into double is
most certainly UB.
Fix by initializing both d and i.
Found by GCC 11's -Wmaybe-uninitialized.
Pick-to: 6.5 6.2 5.15
Change-Id: I103fb72bf4b8792a292346007f498dc6349e9c68
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
... by supplying a TestThreadPool that waitsForDone() with a defined
timeout in the dtor.
When tests hang, this will now print an intelligible message instead
of just the generic watchdog-killed-process one.
Also replace all QVERIFY(waitForDone()) with the same code used in
TestThreadPool's dtor and add a comment in a place we'd rather not use
these tools.
Pick-to: 6.5 6.2
Change-Id: Ifd2b3372eb7c7337a3ba77d003e45dcd77e23545
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Don't benchmark the creation of the QByteArray from the internal
buffer, that's not interesting.
Call resultView() instead of result().
On the one hand, this skews comparisons with older benchmark data.
OTOH, result() used to be the fastest way to get the result out of
QCryptographicHash or QMessageAuthenticationCode, and now it's
resultView(), so in a way, it still is a fair comparison.
Pick-to: 6.5
Change-Id: I864b2f88f01e426c5d0967f57199e13dd7cb29f8
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Because we can, and because function_ref is never null.
Pick-to: 6.5
Change-Id: If71f98860d72eaa8cf8a93bb3c59a0260d3c7660
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
With the OpenSSL 3 backend, some algorithms may not be available. Skip
benchmarking them.
Pick-to: 6.5
Change-Id: I1275332993fe15c007410e25acf59f5e3ec27894
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We could add a tst_QMessageAuthenticationCode, but it would have to
duplicate a lot of the tst_QCryptographicHash machinery, so just add
it here.
Pick-to: 6.5 6.2 5.15
Change-Id: Icc60de865c72c5e423cb3be57f58297c522791f7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test function occasionally can fail on CI/Windows, when a
certificate update on www.qt.io requires installing a new root
certificate on the test VM.
This patch blacklists the test class (which has only one test function)
on Windows. It adds diagnostic output, so future failure reasons can
be established from CI artifacts.
Pick-to: 6.5
Task-number: QTBUG-63481
Change-Id: If686d006f379fe6dbfb0d11d80b8455f72fdbb09
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Amends 4d90c4e74a, after which the test
became flaky. We need to wait for the functor to be called before
quitting the thread, otherwise we have no guarnatee that any of the
queued metacall events have been processed by the thread. Since
QThread::quit is thread-safe, we can just call it from within the
functor. This guarantees that at least one of the single-shot timers
is processed before we quit.
And since QTimer::singleShot has special code paths for 0-ms timers
(going through an explicitly queued QMetaObject::invokeMethod call
rather than through an actual QSingleShotTimer object), we need to run
the test logic with different timeouts to cover both code paths.
Task-number: QTBUG-112162
Pick-to: 6.5 6.2 5.15
Change-Id: Ide1e7b4b74dcbda72144a0d73ef5f64b0694ddbc
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test can collide with a 1960-01-01 transition in some zones, so
move it to Jan 2nd to avoid that.
Pick-to: 6.5
Change-Id: I5286cadc0de0b66283253b0ac736f23a2add0c8f
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
A foreign window can be used both for embedding a Qt window into a
native window hierarchy, or for embedding a native window into a Qt
window hierarchy. In the former case, we should not modify the foreign
window in any way. Since the platform does not know anything about the
intended use case at the time of the foreign window creation, it should
avoid modifying the foreign window in any way, and should instead pick
up the foreign window state and reflect that through QWindow.
Pick-to: 6.5
Change-Id: Id2e39d101277ecebd656d615cea3e7f734a4b0a6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The member variable indexBeforeChange is member-initialized with -1 and
changed to the current row, if a valid index is set.
It is used to check, if the model has been reset to an empty model
and/or the index has been invalidated. The result is used to decide, if
the currentIndexChanged signal is emitted or not.
If a combo box had a valid index and it is invalidated afterwards
(e.g. because the combobox has no more entries), indexBeforeChange is
not reset to -1. The redundant signal emission is therefore prevented
only the first time.
This patch resets indexBeforeChange if the index is invalidated or the
last item is removed from the combo box.
It also adds a no-op check to tst_QComboBox::currentIndex.
The test data sets "check that setting the index to -1 works" and
"check that current index is invalid when removing the only item" check
the respective use cases.
As a drive-by, variable names and QObect::connect syntax have been
cleaned up in tst_QComboBox::currentIndex.
Fixes: QTBUG-108614
Pick-to: 6.5 6.2
Change-Id: Ib6dfa887d9247f2c47df065039d69ba57c32fa24
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QT_SCREEN_SCALE_FACTORS is in many cases set on behalf of the user,
instead of by the user, so we should apply the standard app
scale factor policies to it, instead of interpreting it
as a user override.
Specifically, make it subject to the rounding policy set by
QGuiApplication::setHighDpiScaleFactorRoundingPolicy(). This
means that applications which support integer scale factors
only will see integers only, also when QT_SCREEN_SCALE_FACTORS
specifies a fractional factor.
Users who want to override can set
QT_SCALE_FACTOR_ROUNDING_POLICY=PassThrough
to restore the default Qt rounding behavior.
[ChangeLog][QtGui] The high-DPI scale factor rounding policy (settable with
QGuiApplication::setHighDpiScaleFactorRoundingPolicy() or
QT_SCALE_FACTOR_ROUNDING_POLICY) now applies to scale factors set
with QT_SCREEN_SCALE_FACTORS.
Fixes: QTBUG-95930
Fixes: QTBUG-99546
Change-Id: I936e96671fe2a0a43c3e8129f0768875cb011103
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The usual problem, the usual fix: default the addResult() template
argument to the class template argument, cf. e.g. wg21.link/p2218.
[ChangeLog][QtCore][QPromise] Added support for calls to addResult()
with braced initializers.
Fixes: QTBUG-111826
Change-Id: I9ad7294dbcefbc5d2609ca3d9e7304dbeb8b3f41
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Currently, Qt assumes that enums always have int as their underlying
type (both in QMetaEnum::keyToValue and in the QML engine). This change
makes it possible to to retrieve the underlying type from an enum's
metaype - or rather, a metatype of an integral type with the same size
and signedness. The use cases aobve don't really rely on the exact same
type. In most cases, we wouldn't even need the signedness, however that
is already available anyway, and it will come in handy once QML supports
bigint, and we need to decide whether we should return
While it would be possible for individual users of this function to
manually query the size and signedness, having a function returning a
metatype offers additional convenience - especially in QML, where the
conversion APIs generally operate on metatypes.
Task-number: QTBUG-27451
Task-number: QTBUG-84055
Task-number: QTBUG-112180
Change-Id: Icf733b42df0ea64017d69f4d94cb7c855d9e3201
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
... and also extend the documentation to explain this case explicitly.
Fixes: QTBUG-107545
Pick-to: 6.5 6.2
Change-Id: I9414cc677b037989de60e97871485018e5c8a569
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Add support for time zones in the IBASE driver, which was introduced in
firebird 4.x. TIMESTAMP WITH TIME ZONE data type is supported in order
to store and retrieve a QDateTime with the time zone.
Task-number: QTBUG-111879
Change-Id: I631b4262d17796a17630379b7d659f88244a23ad
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
A null QString used to make a QVariant containing it null in Qt 5, but
this is no longer the case. Add a test that get_if works as expected.
Task-number: QTBUG-111598
Change-Id: I0f3511e1b33f4a9d67755269455680feda22ddca
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This second patch of the series implements get().
Unlike other get() implementations in Qt, don't use my trick with the
constrained friend free function here. Instead, provide the four
overloads manually, like mandated by the standard library for
std::variant (and, indeed, tuple), such that these functions can also
be used on subclasses of QVariant.
[ChangeLog][QtCore][QVariant] Implemented the type-based std::variant
access protocol (get<T>()/get_if<T>()) to allow easier access to the
contained element than the previous solution of casting data(), as
well as to allow generic code to treat QVariant and std::variant the
same. The holds_alternative<T>() function is not provided, since it's
the same as get_if<T> != nullptr. The index-based variant access
functions (get<I>()/get_if<I>()) are also not provided, because,
unlike std::variant, QVariant does not have a bounded number of
alternative types, and QMetaType IDs are not (all) compile-time
constants.
Fixes: QTBUG-111598
Change-Id: Id7bc41f7d91761b3483ec5604f1a4685c8079844
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QVariant supports non-default-constructible payloads, in principle
(QTBUG-105140). And fromValue() works with such types, but value()
insists on providing a wide contract and therefore accidentally
requires default-constructible.
We can now invent other "Qt-ish" API like optional::value_or() or a
value() that returns optional<T>, but we should first get the
interface in that generic code must use, and which at the same time is
the most versatile, because it gives write access to the element
stored in the variant: [variant.get], consisting of get_if(), get(),
and holds_alternative(). The latter is the same as get_if() !=
nullptr, so we won't provide it.
This first patch implements get_if(), adds test for it.
As a Hidden Friend supposed to be called with explicit template
arguments, we run into the problem that wg21.link/P0846 solved for
C++20. Add the usual work-around, and check it works.
The ChangeLog will be on the last patch.
Task-number: QTBUG-111598
Change-Id: I23f57ea2de3946944810c5552c68a7a3060a44f2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I must have broken this in the 6.5 work I did for QMetaType and
QVariant, but I haven't searched which commit exactly did it. Our
QVariant tests are old and thus only checked the type ID, which meant
that they caused the registration by the act of asking for the ID in the
first place; this commit adds a couple of explicit checks for the type
registered by name before the ID.
Fixes: QTBUG-112205
Pick-to: 6.5 6.5.0
Change-Id: Idd5e1bb52be047d7b4fffffd174f1b14d90fd7a3
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
For single-shot timers, at least. QSingleShotTimer had either an
optimization or the only way to make new-style slot invocations by
storing the QSlotObject pointer and calling it directly. Instead of
doing that, let's just actually connect and let QObject handle the
actual delivery.
[ChangeLog][QtCore][QTimer] Fixed a bug that caused slots connected to
single-slot timers using the new-style connection mechanism to be
delivered in the wrong thread.
Fixes: QTBUG-112162
Pick-to: 5.15 6.2 6.5
Change-Id: Idd5e1bb52be047d7b4fffffd174eadb227ab65ee
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
As usual, assign them to a [[maybe_unused]] variable, to avoid
potential future [[nodiscard]] problems, and to indicate to
readers of the code that there's a result that's being returned,
we're just not interested in it.
Pick-to: 6.5 6.2
Change-Id: I2bd47ca98418092ca885d50a1a6417a21a612a85
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
... conveniently wrapped in a generator, to not have to keep an
algoname() function in sync with QCryptographicHash::Algorithm.
The MaxCryptoAlgorithm constant was already stale following the
addition of BLAKE2b/s algorithms in
5d69aa3ee1.
Also make the data-driven tests have an actual Algorithm column
(was: int) to minimize casting.
Pick-to: 6.5 6.2 5.15
Change-Id: I89a6098e512a72f623fd50a6f88fc351c7bb1418
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Having a simple Dear ImGui bridge is not just useful for the manual
tests, which do not have any other means to displays GUIs, but is
in itself an important exercise for the QRhi machinery.
Have a new manual test that exercises the built-in ImGui demo window.
Then use it in the displacement test for real, to replace the myriads
of key presses with on-screen sliders and checkboxes (with less code).
Change-Id: I296bafae2a5cce6fc7a447d97e68e5bcec15f451
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Because it is the least documented one, and compared to the other
Vulkan examples it does not add anything new, it just dives deeper
into Vulkan.
Pick-to: 6.5
Change-Id: Iecf3e04625fba256ea8134da57f54498ee2010db
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
The necessary QT_ENABLE_P0846_SEMANTICS_FOR is already provided by
qpoint.h) here. Add a test to confirm it works.
Amends 0e22001a3b.
[ChangeLog][QtGui][QVector2/3/4D] Fixed manual get<I>() calls
(Tuple Protocol) in C++17 mode.
Task-number: QTBUG-111598
Change-Id: Id4a118b6439c2d1471b921f8d92ee558f9902eab
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
In C++17, unqualified lookup doesn't find function templates that
require ADL from a call with explicit template arguments, unless
another function template of that name is in scope (otherwise, the <
is parsed as operator less-than instead).
P0846, merged for C++20, fixes this to repeat the name lookup, parsing
the < as indicating a template.
We have API in Qt (Tuple Protocol for some types, e.g. QPoint) that
work for the purpose of Structured Bindings, but don't work for manual
unqualified calls when P0846 semantics are missing, and we're adding
more, to QVariant, so add a macro to handle the issue.
The macro simply declares a function template overload of the given
name for a throw-away struct, thereby bringing, for that one name,
P0846 semantics into C++17.
When we require C++20, we can drop this again.
Amends:
- fb6b7869e8 for QPoint(F)
- 8ae9431c79 for QMargins(F)
- 0e22001a3b for the rest
[ChangeLog][QtCore][QSize/F, QMargins/F, QPoint/F] Fixed manual
get<I>() calls (Tuple Protocol) in C++17 mode.
Task-number: QTBUG-111598
Change-Id: I2ffaef12c5bb6d82f75ce78a7c03c6789dfa0691
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This is useful for a lot of applications that render text coming from
sources which already support arbitrarily numbered lists (like chat
applications for example). Application-side workarounds usually have
significant overhead; and this feature has been requested multiple times.
It should be possible to both read and write HTML with the <ol start="x">
attribute, and read and write Markdown with arbitrary numbers for the
first item in a list.
[ChangeLog][QtGui] QTextList now supports specifying a start index using
the new QTextList::{setStart, start} functions. The HTML start attribute
on ordered lists in rich text documents is now parsed and used when
rendering a text list. Non-negative indices in markdown lists are now
also parsed and written properly. This allows starting a list with a
different number than 1.
Fixes: QTBUG-30407
Fixes: QTBUG-65384
Task-number: QTBUG-107562
Change-Id: Ib35b9378d9134ffedaa2d92f728b0984793aa7c1
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
At least on X11 this is a real hierarchy: slave devices come and go
as children of the master devices. The goal is to verify that this tree
and the output of `xinput list` are in sync. The model calls
[begin|end]InsertRows() and [begin|end]RemoveRows() as necessary to
attempt to keep the view updated.
Task-number: QTBUG-46412
Task-number: QTBUG-98720
Task-number: QTBUG-104878
Task-number: QTBUG-112141
Change-Id: I8a2252f041cd1de777eef225d0e7f0db5c90a706
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change the signature of stateChanged(int) to emit Qt::CheckState
instead. This was forgotten during Qt6 porting so we have to wait for
Qt7.
Task-number: QTBUG-104688
Change-Id: Ica2504e5b9ae68612de81524faed0f31c9b10402
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
