This fixes high CPU load for upload devices that don't generate
a constant stream of data. Their readData() function was called all the
time without returning actual data.
This was noticed when implementing an upload device that emits data in
a limited way for bandwidth limiting.
[ChangeLog][QtNetwork][QNetworkAccessManager] Fixed high CPU load when handling
POST/upload QIODevice that generates data on readyRead().
Change-Id: Iefbcb1a21d8aedef1eb11761232dd16a049018dc
Reviewed-by: Richard J. Moore <rich@kde.org>
At the moment, there is no stream information in the cache file. This
can lead to a problem when current stream version differs from version
cache file written with.
As an example, if file written with Qt 5.1.1, QTimeDate in the metadata
stored as 13-bytes value, but Qt 5.2 and later can read additional 4
bytes which breaks following data, leading to network request just hangs
forever.
Adding stream version fixes this problem.
As cache format changed, cache version bumped.
Task-number: QTBUG-36219
Change-Id: I467d8c9fda82bcf9302192f51e7a00d2f6a9ff66
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
We were keeping a dangling pointer to a non-existent QIODevice around
which would lead to a crash.
Task-number: QTBUG-17400
Change-Id: Ie374cbb94bb45c9b0fbef46287b3317f60154123
Reviewed-by: Richard J. Moore <rich@kde.org>
FAIL! : tst_QNetworkReply::ioPostToHttpUploadProgress() 'args.at(0).toLongLong() != sourceFile.size()' returned FALSE. ()
Task-number: QTBUG-37449
Task-number: QTBUG-24226
Change-Id: Idcc0ceac0332705b1e3a073d40fa8098bea2c9f3
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
... and not only one. This was a problem e.g. when there were several
requests to the same host and the host was not reachable; only one
reply would get an error signal in case we suppressed other errors in
"happy eyeballs" host lookup style.
Task-number: QTBUG-36890
Change-Id: I1b5757498bd644b0d773cf6c43e4950620949c5c
Reviewed-by: Richard J. Moore <rich@kde.org>
Do not close connection in slot bytesWritten() since that can
cause clients to fail with "Connection Closed". Instead, use
deleteLater() to close properly and prevent leaking the sockets.
FAIL! : tst_QNetworkReply::qtbug28035browserDoesNotLoadQtProjectOrgCorrectly() 'waitForFinish(reply) == Success' returned FALSE. ( QUrl( "http://localhost:58240" ) failed: # 2 "Connection closed" )
..\tst_qnetworkreply.cpp(7067) : failure location
Task-number: QTBUG-37449
Change-Id: Ib92cb62fae523370b2fb45e1ccfa217559732bc8
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Replacing old troll.no domain with qt-project.org domain. Using troll.no
doesn't work anymore.
Change-Id: Ic6fa71b044d1adbdc66c875b47bfdc256a2afc8e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The test takes too long and fails:
FAIL! : tst_QFtp::abort(WithoutProxy:get_fluke01) '(int)newData_ba.size() == bytesDone' returned FALSE. ()
tst_qftp.cpp(1886) : failure location
FAIL! : tst_QFtp::abort(WithoutProxy:get_fluke01) Network operation timed out
tst_qftp.cpp(1392) : failure location
FAIL! : tst_QFtp::abort(WithoutProxy:put_fluke01) 'bytesDone != bytesTotal' returned FALSE. ()
tst_qftp.cpp(1406) : failure location
FAIL! : tst_QFtp::abort(WithSocks5Proxy:get_fluke01) '(int)newData_ba.size() == bytesDone' returned FALSE. ()
tst_qftp.cpp(1886) : failure location
FAIL! : tst_QFtp::abort(WithSocks5Proxy:get_fluke01) Network operation timed out
tst_qftp.cpp(1392) : failure location
FAIL! : tst_QFtp::abort(WithoutProxyWithSession:get_fluke01) '(int)newData_ba.size() == bytesDone' returned FALSE. ()
tst_qftp.cpp(1886) : failure location
FAIL! : tst_QFtp::abort(WithoutProxyWithSession:get_fluke01) Network operation timed out
tst_qftp.cpp(1392) : failure location
FAIL! : tst_QFtp::abort(WithoutProxyWithSession:put_fluke01) 'bytesDone != bytesTotal' returned FALSE. ()
tst_qftp.cpp(1406) : failure location
FAIL! : tst_QFtp::abort(WithSocks5ProxyAndSession:get_fluke01) '(int)newData_ba.size() == bytesDone' returned FALSE. ()
tst_qftp.cpp(1886) : failure location
FAIL! : tst_QFtp::abort(WithSocks5ProxyAndSession:get_fluke01) Network operation timed out
tst_qftp.cpp(1392) : failure location
Totals: 327 passed, 10 failed, 4 skipped
QtQA::App::TestRunner: warning: test duration (398 seconds) is dangerously close to maximum permitted time (450 seconds)
QtQA::App::TestRunner: warning: Either modify the test to reduce its runtime, or use a higher timeout.
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
Change-Id: I122641f174927c6b3668df05c79f88e38b88042f
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
- Replace SRCDIR define by QFINDTESTDATA
- Replace QVERIFY by QCOMPARE where applicable
- Introduce QVERIFY2 with message for comparisons
Change-Id: Ib5a6b0f09428587281e1b9521e4d8a8117c1afdb
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
There is no need to even try to run the tests if the network test
server is not present.
Add a validation in initTestCase() since all test functions depend
on the network test server.
Change-Id: I8eca376a718ab5b6e1cc2c57f2e045dd0b58f52b
Reviewed-by: Richard J. Moore <rich@kde.org>
Currently the only supported SPDY version is 3.0.
The feature needs to be enabled explicitly via
QNetworkRequest::SpdyAllowedAttribute. Whether SPDY actually was used
can be determined via QNetworkRequest::SpdyWasUsedAttribute from a
QNetworkReply once it has been started (i.e. after the encrypted()
signal has been received). Whether SPDY can be used will be
determined during the SSL handshake through the TLS NPN extension
(see separate commit).
The following things from SPDY have not been enabled currently:
* server push is not implemented, it has never been seen in the wild;
in that case we just reject a stream pushed by the server, which is
legit.
* settings are not persisted across SPDY sessions. In practice this
means that the server sends a small message upon session start
telling us e.g. the number of concurrent connections.
* SSL client certificates are not supported.
Task-number: QTBUG-18714
[ChangeLog][QtNetwork] Added support for the SPDY protocol (version
3.0).
Change-Id: I81bbe0495c24ed84e9cf8af3a9dbd63ca1e93d0d
Reviewed-by: Richard J. Moore <rich@kde.org>
They cause test failures from time to time.
Change-Id: I917bef340401d25bf54e133be9d9562b3b133c9f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Niels Weber <niels.weber@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
A few more HTTP status codes from the 4xx and 5xx series have been
added to QNetworkReply::NetworkError.
For content errors, the following codes have been added:
1. 409 - Resource Conflict
2. 410 - Resource Gone
For server related errors, the following codes have been added:
1. 500 - Internal Server Error
2. 501 - Operation Not Implemented
3. 503 - Service Unavailable
Few of the above codes are quite possible when communicating with REST
based services.
NOTE:
=====
* HTTP error status 400 is interpreted as
QNetworkReply::ProtocolInvalidOperationError.
* QNetworkReply::UnknownServerError is returned for all server related
errors (5xx) not listed above.
[ChangeLog][QtNetwork][QNetworkReply] Added more (specific) HTTP status
codes to NetworkError enum.
Task-number: QTBUG-30880
Change-Id: I9d2a133f6b3869f26710c6eb930dd8b08df31108
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
The tests pass with the new test server image. Once we are using the
new test server we can remove the test for the host not found error.
Change-Id: Iac8ba6d8ce31b0865b33a003086aac0339afe338
Reviewed-by: Richard J. Moore <rich@kde.org>
For IPv6 addresses don't call toAce as it returns the empty string.
We should reflect the behavior of browsers here, which all accept
cookies from IPv6 addresses.
Original-patch-by: David Tapuska <dtapuska@blackberry.com>
Task-number: QTBUG-35022
Change-Id: Ic00369e923d044ec459822b2405865c13e4185b6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
If the domain is an IP address, we should not do any magic regarding
leading dots etc.
Task-number: QTBUG-35022
Change-Id: I7722de4e6027666dde27e9e37b6353e3da775d94
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
to reflect the fact that this returns and sets the whole session
ticket, and not just the session ID.
Change-Id: I00fe2bc4197dbcd7a02b3ae4f2f84e3a2a7edad0
Reviewed-by: Richard J. Moore <rich@kde.org>
Use the correct identifier for the OS X operating system.
Change-Id: I7158a6b77e5e7418bc6b0a565f003500820a346d
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
If we end up QSKIP'ing the test 'wronlyFileName' is never created.
Change-Id: I2ccbfdb630b58d7904e73b476a65a82a45ab90d7
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
This test works with no Qt version (4 or 5) when testing with the
Squid (HTTP proxy) version deployed on the new test server image.
Task-number: QTBUG-33180
Change-Id: If244526a4baed9f3836dade007fe0f15649a8f86
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... supported on the new test server. Once the new server image is in
place, we can only allow for the new life time hint of 300 seconds.
Task-number: QTBUG-33040
Change-Id: Id6ad9983789cc6badf3fc2f6628bf79379988201
Reviewed-by: Richard J. Moore <rich@kde.org>
When readData() is called repeatedly, we need to keep track which
part of the multipart message we are currently reading from.
Hereby we also need to take the boundary size into account, and not
only the size of the multipart; otherwise we would skip a not
completely read part. This would then later lead to advancing the
read pointer by negative indexes and data loss.
Task-number: QTBUG-32534
Change-Id: Ibb6dff16adaf4ea67181d23d1d0c8459e33a0ed0
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
- Don't run this test in parallel
- Remove redundant QT=-gui
- Place the insignificant_test marks together
Change-Id: I078fa29a4dccef9af8798792d06d51835b4b8934
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Session tickets can be cached on the client side for hours (e.g.
graph.facebook.com: ~ 24 hours, api.twitter.com: 4 hours), because the
server does not need to maintain state.
We need public API for it so an application can cache the session (e.g.
to disk) and resume a session already with the 1st handshake, saving
one network round trip.
Task-number: QTBUG-20668
Change-Id: I10255932dcd528ee1231538cb72b52b97f9f4a3c
Reviewed-by: Richard J. Moore <rich@kde.org>
There is already an enum to disable SSL session tickets, which has been
used to disable session sharing for now. However, SSL session sharing
is not the same as SSL session tickets: Session sharing is built into
the SSL protocol, while session tickets is a TLS extension (RFC 5077).
Change-Id: If76b99c94b346cfb00e47366e66098f6334fd9bc
Reviewed-by: Richard J. Moore <rich@kde.org>
In particular, set online state right upon construction of the
QNetworkAccessManager instance. Therefor, QNAM needs an instance of a
QNetworkConfigurationManager internally.
Before, this would only work properly if a network session was created.
Now, networkAccessible() returns the correct status.
Change-Id: I7ff9ccfd18ad376a131fc5977843b55bf185fba0
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Add an encrypted signal to QNAM and QNetworkReply to allow applications
to perform additional checks on the certificate chain beyond those done
as part of the standard SSL validation. This allows things like
certificate change notification to be implemented for QNAM as they can
be for QSSLSocket currently.
Change-Id: I693e3e6fec8b7040379b7e7f1f819550e6b2617f
Reviewed-by: Peter Hartmann <phartmann@rim.com>
The "mediumfile" is actually 9.6 MB large, and makes the test slow and
even fail on mobile platforms.
Change-Id: I694d9d38e4d09c8e90a03c1141320fe2a757fdd9
Reviewed-by: Richard J. Moore <rich@kde.org>
